we spawned a goroutine to wait on the context's done
channel sending the error afterward, but we forgot
to ensure the context was eventually done, so the
goroutine would be leaked until then.
instead, we can just do a select on two channels to
get the error rather than spawn a goroutine which
makes it impossible to leak a goroutine.
Change-Id: I2fdba206ae6ff7a3441b00708b86b36dfeece2b5
the net package does not make it easy to know if DialContext
failed because the context was done. it's important for some
of our tests that canceled contexts are detected as such, so
we accept the small race that's arguably correct (the context
must be canceled asynchronously) to ensure we always return
the context error if available.
Change-Id: I058064d5c666e5353b74fb5bd300bf7abe537ff5
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
it was possible, because we spawned Run before we did any calls
to Route, that the listenmux would send multiple connections to
the default listener. Fix that by ensuring we call Route before
we call Run.
Change-Id: Ie8fd754997975969a99fd2a3f8d3010c24cdc73d
It provides an abstraction around the rpc details so that one
can use dprc or gprc with the same code. It subsumes using the
protobuf package directly for client interfaces as well as
the pkg/transport package to perform dials.
Change-Id: I8f5688bd71be8b0c766f13029128a77e5d46320b
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
What: we move api keys out of the grpc connection-level metadata on the client side and into the request protobufs directly. the server side still supports both mechanisms for backwards compatibility.
Why: dRPC won't support connection-level metadata. the only thing we currently use connection-level metadata for is api keys. we need to move all information needed by a request into the request protobuf itself for drpc support. check out the .proto changes for the main details.
One fun side-fact: Did you know that protobuf fields 1-15 are special and only use one byte for both the field number and type? Additionally did you know we don't use field 15 anywhere yet? So the new request header will use field 15, and should use field 15 on all protobufs going forward.
Please describe the tests: all existing tests should pass
Please describe the performance impact: none
The fundamental problem is that both drpc and grpc servers
want to close the listener and they both want to ignore the
error from Accept after the listener is closed. There's no
way to do this in a race free way. Fortunately, the mux
hands out listeners that can be independently closed. That
means they can both do their own shutdown logic where they
ignore the error, and then after they're closed, the code
orchestrating the servers can close the listeners.
The final weird bit is that the server's Close method is
required to wait until the Run method has exited (or at
least enough for the listeners to definitely be closed)
because tests depend on that behavior, so we have to add
some channels/mutexes/onces to ensure that Run has exited
and that a new call can't start after Close is called.
Change-Id: I7c4ef293f7963f83138815f51824fd5b8d09ce15
this is a trivial operation for storagenode/console, as it doesn't
really need or use kademlia in the first place.
What:
Removes kademlia from storagenode/console
Why:
We are in the process of getting rid of kademlia, and this is one place where it's particularly easy.
Please describe the tests:
Existing tests exercise storagenode/console behavior; if they continue to work, everything here should be tested satisfactorily.
Please describe the performance impact:
None
* add init contact proto
* make 2 svcs
* add geenerated proto code
* fux conflict with NodeRequest name
* use correct version on proto
* rm extra node fields
* add protolock
* update field names so they are better
* rm node id since we dont need it
the current prometheus help messages have enough unexpected
characters that they are breaking prometheus parsing. they
may also be triggering prometheus to expect more from us (type
annotations) than we have to offer.
we're really not adding a lot of value with these help messages,
so just take them out
Change-Id: I9b723447a294bb492a6292480e9f88634346a80b
What: this change makes sure the count of segments is not encrypted.
Why: having the segment count encrypted just makes things hard for no reason - a satellite operator can figure out how many segments an object has by looking at the other segments in the database. but if a user has access but has lost their encryption key, they now can't clean up or delete old segments because they can't know how many there are without just guessing until they get errors. :(
Backwards compatibility: clients will still understand old pointers and will still write old pointers. at some point in the future perhaps we can do a migration for remaining old pointers so we can delete the old code.
Please describe the tests: covered by existing tests
Please describe the performance impact: none
* pkg/process: Fatal show complete error information
Change the general process execution function to not using the sugared
logger for outputting the full error information.
Delete some unreachable code because Zap logger Fatal method calls exit
1 internally.
* storagenode/storagenodedb: Add info to error
Add more information to an error returned due to some data
inconsistency.
* storagenode/orders: Don't use sugared logger
Don't use sugar logger and provide better contextualized error messages
in settle method.
* storagenode/orders: Add some log fields to error msgs
Add some relevant log fields to some logged errors of the sender settle
method.
* satellite/orders: Remove always nil error from debug
Remove an error which as logged in debug level which was always nil and
makes the logic that used this variable clear.
* storagenode/orders: Don't return error Archiving unsent
Don't stop the process which archive unsent orders if some of them
aren't found the DB because it cause the Storage Node to stop with a
fatal error.
this avoids a problem where setting on a flag isn't sufficient
to express complex data structures like []string.
Change-Id: I06f13656996d658b4c7a957451cb253728a67eda
* satellitedb/certDB: refactors of the node certificate storage DB table
The existing implementation doesnt allow to store the complete certificate chain of uplinkIDs or storagenodeIDs, so the current table is dropped and new table will be added which addresses the storage and retrieval of certificates
pkg/identity: fixes spelling mistakes that I missed on PR#2754
Fixes V3-1992/V3-2388
Deprecate the pieceinfo database, and start storing piece info as a header to
piece files. Institute a "storage format version" concept allowing us to handle
pieces stored under multiple different types of storage. Add a piece_expirations
table which will still be used to track expiration times, so we can query it, but
which should be much smaller than the pieceinfo database would be for the
same number of pieces. (Only pieces with expiration times need to be stored in piece_expirations, and we don't need to store large byte blobs like the serialized
order limit, etc.) Use specialized names for accessing any functionality related
only to dealing with V0 pieces (e.g., `store.V0PieceInfo()`). Move SpaceUsed-
type functionality under the purview of the piece store. Add some generic
interfaces for traversing all blobs or all pieces. Add lots of tests.
What: Change cmd/uplink to use scopes
It moves the fields that will be subsumed by scopes into an explicit legacy section and hides their configuration flags.
Why: So that it can read scopes in from files and stuff
* storagenode/piecestore: track live requests together
Change-Id: I9ed44e4484b97bcbe076c222450c3449fe8b1075
* show grpc status codes in monkit failures
Change-Id: I68bc3a8d24a372e8147ef2a74636fc3e40fa799a
* small nit
Change-Id: I722b09345377b079e41c5a3dc86d7fd6232c9d24
* pkg/server: don't use global logger
* satellite/overlay: use correct logger
* pkg/kademlia: use correct logger
* linksharing: use conventional way to pass in logger
* use zaptest in tests
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
* Added a gc package at satellite/gc, which contains the gc.Service, which runs garbage collection integrated with the metainfoloop, and the gc PieceTracker, which implements the metainfo loop Observer interface and stores all of the filters (about which pieces are good) for each node.
* Added a gc config located at satellite/gc/service.go (loop disabled by default in release)
* Creates bloom filters with pieces to be retained inside the metainfo loop
* Sends RetainRequests (or filters with good piece ids) to all storage nodes.
* pkg/datarepair/repairer: Track always time for repair
Make a minor change in the worker function of the repairer, that when
successful, always track the metric time for repair independently if the
time since checker queue metric can be tracked.
* storage/postgreskv: Wrap error in Get func
Wrap the returned error of the Get function as it is done when the
query doesn't return any row.
* satellite/metainfo: Move debug msg to the right place
NewStore function was writing a debug log message when the DB was
connected, however it was always writing it out despite if an error
happened when getting the connection.
* pkg/datarepair/repairer: Wrap error before logging it
Wrap the error returned by process which is executed by the Run method
of the repairer service to add context to the error log message.
* pkg/datarepair/repairer: Make errors more specific in worker
Make the error messages of the "worker" method of the Service more
specific and the logged message for such errors.
* pkg/storage/repair: Improve error reporting Repair
In order of improving the error reporting by the
pkg/storage/repair.Repair method, several errors of this method and
functions/methods which this one relies one have been updated to be
wrapper into their corresponding classes.
* pkg/storage/segments: Track path param of Repair method
Track in monkit the path parameter passed to the Repair method.
* satellite/satellitedb: Wrap Error returned by Delete
Wrap the error returned by repairQueue.Delete method to enhance the
error with a class and stack and the
pkg/storage/segments.Repairer.Repair method get a more contextualized
error from it.
Create a new variable rather than reusing the existing one because the
name of the existing one is confusing when reading the logic and it
requires more time that the logic doesn't have a bug.
* Added the ability to pass timeout settings from cmd/uplink to libuplink.
* Removed commented out code.
* Updated 2min timeouts for the uplink CLI.
* Removed comment.
* Made transport defaultDialTimeout and defaultRequestTimeout public
* Added comments to describe where these defaults apply.
* Added a new defaults to libuplink and added tests.
* Added a new defaults to libuplink and added tests.
* pkg/datarepair: Add test to check num upload pieces
Add a new test for ensuring the number of pieces that the repair process
upload when a segment is injured.
* satellite/orders: Don't create "put order limits" over total
Repair must not create "put order limits" more than the total count.
* pkg/datarepair: Update upload repair pieces test
Update the test which checks the number of pieces which are uploaded
during a repair for using the same excess over the success threshold
value than the implementation.
* satellites/orders: Limit repair put order for not being total
Limit the number of put orders to be used by repair for only uploading
pieces to a % excess over the successful threshold.
* pkg/datarepair: Change DataRepair test to pass again
Make some changes in the DataRepair test to make pass again after the
repair upload repaired pieces only until a % excess over success
threshold.
Also update the steps description of the DataRepair test after it has been
changed, to match on what's now, besides to leave it more generic for
avoiding having to update it on minimal future refactorings.
* satellite: Make repair excess optimal threshold configurable
Add a new configuration parameter to the satellite for being able to
configure the percentage excess over the optimal threshold, used for
determining how many pieces should be repaired/uploaded, rather than
having the value hard coded.
* repairer: Add configurable param to segments/repairer
Add a new parameters to the segment/repairer to calculate the maximum
number of excess nodes, based on the optimal threshold, that repaired
pieces can be uploaded.
This new parameter has been added for not returning more nodes than the
number of upload orders for data repair satellite service calculate for
repairing pieces.
* pkg/storage/ec: Update log message in clien.Repair
* satellite: Update configuration lock file
checker_segment_total_count - Number of total segments in pointer during checker iteration
checker_segment_healthy_count - Number of healthy segments in pointer during checker iterationn
time_since_checker_queue - Seconds elapsed between checker queue and beginning repair
time_for_repair - Seconds elapsed between beginning repair and ending repair/dequeueing
* add db interface and methods, add sa metainfo endpoints and svc
* add bucket metainfo svc funcs
* add sadb bucekts
* bucket list gets all buckets
* filter buckets list on macaroon restrictions
* update pb cipher suite to be enum
* add conversion funcs
* updates per comments
* bucket settings should say default
* add direction to list buckets, add tests
* fix test bucket names
* lint err
* only support forward direction
* add comments
* minor refactoring
* make sure list up to limit
* update test
* update protolock file
* fix lint
* change per PR
* Fix some log message to actually report the number of pieces needed to
repaired for reaching the successful/optimal threshold.
* Remove some unneeded `nil` check conditional.
* monitor optimal wait fraction
Change-Id: I1c76da5e8031237cf78ce5a0774732dd5e558ea1
* monitor other times about the upload
Change-Id: Iae81c80fb1446fbf4b3dd04fc6b238f2ede96545
