If a segment is deleted, is modified, or expires during an audit, this
is not problematic, so we should not return errors. Functionally,
nothing changes, but our metrics around audit success rate will be
improved after this change.
Change-Id: Ic11df056b2c73894b67a55894bd4d58c00470606
* Do not swap the active audit queue with the pending audit queue until
the active audit queue is empty.
* Do not begin creating a new pending audit queue until the existing
pending audit queue has been swapped to the active queue.
Change-Id: I81db5bfa01458edb8cdbe71f5baeebdcb1b94317
Since we increased the number of concurrent audit workers to two, there are going
to be instances of a single node being audited simultaneously for different segments.
If the node times out for both, we will try to write them both to the pending audits
table, and the second will return an error since the path is not the same as what
already exists. Since with concurrent workers this is expected, we will log the
occurrence rather than return an error.
Since the release default audit concurrency is 2, update testplanet default to run with
concurrent workers as well.
Change-Id: I4e657693fa3e825713a219af3835ae287bb062cb
This test failed due to a timeout on a download which is supposed to
succeed. The testplanet default for the value is 5 seconds, but here
it is 500 milliseconds.
It looks like this is due to the fact that later in the test we need to
wait for a slow node to timeout, so we cut the timeout shorter to reduce
test time.
This PR increases the timeout to 1 second. Still not too long to wait, but
gives us twice as much time to download, decreasing the likelihood that we
see the timeout error.
Change-Id: I504db39ab5dc4d3c505520337b258265d6da7020
What: As soon as a node passes the vetting criteria (total_audit_count and total_uptime_count
are greater than the configured thresholds), we set vetted_at to the current timestamp.
Why: We may want to use this timestamp in future development to select new vs vetted nodes.
It also allows flexibility in node vetting experiments and allows for better metrics around
vetting times.
Please describe the tests: satellitedb_test: TestUpdateStats and TestBatchUpdateStats make sure vetted_at is set appropriately
Please describe the performance impact: This change does add extra logic to BatchUpdateStats and UpdateStats and
commits another variable to the db (vetted_at), but this should be negligible.
Change-Id: I3de804549b5f1bc359da4935bc859758ceac261d
Also distinguish the purpose for selecting nodes to avoid potential
confusion, what should allow caching and what shouldn't.
Change-Id: Iee2451c1f10d0f1c81feb1641507400d89918d61
Add a flag that allows us to easily switch disqualification from
suspension mode on or off. A node will only be disqualified from
suspension mode if it has been suspended for longer than the grace
period AND the SuspensionDQEnabled flag is true.
Change-Id: I9e67caa727183cd52ab2042b0a370a1bcaebe792
TestVerifierSlowDownload would sometimes not have enough nodes finish in
the allotted deadline period. This increases the deadline and also does
not assert that exactly 3 have finished. Instead, in keeping with the
purpose of the test, it asserts that the slow download is never counted
as a success and is always counted as a pending audit in the final
report.
Change-Id: I180734fcc4a499420c75164bad6253ed155d87de
Sometimes nodes who have gracefully exited will still be holding pieces
according to the satellite. This has some unintended side effects
currently, such as nodes getting disqualified after having successfully
exited.
* When the audit reporter attempts to update node stats, do not update
stats (alpha, beta, suspension, disqualification) if the node has
finished graceful exit (audit/reporter_test.go TestGracefullyExitedNotUpdated)
* Treat gracefully exited nodes as "not reputable" so that the repairer
and checker do not count them as healthy (overlay/statdb_test.go
TestKnownUnreliableOrOffline, repair/repair_test.go
TestRepairGracefullyExited)
Change-Id: I1920d60dd35de5b2385a9b06989397628a2f1272
If a node is suspended and receives an unknown or failing audit,
disqualify them if the grace period (default 1w in production) has
passed.
Migrate the nodes table so any node that is currently suspended gets
unsuspended when the satellite starts up.
Change-Id: I7b81c68026f823417faa0bf5e5cb5e67c7156b82
Alpha=1 and beta=0 are the expected first values for any alpha/beta
reputation system we are using in the codebase. So we are removing the
configurability of these values.
Change-Id: Ic61861b8ea5047fa1438ea6609b1d0048bf0abc3
Whenever the node's reputation is updated, if its unknown audit
reputation is below the suspension threshold, its suspension field
is set to the current time. This could overwrite the previous
"suspendedAt" value resulting a node that never reaches the end of
its suspension.
Also log whenever a node is disqualified or its suspension status
changes
Change-Id: I5e8c8f1c46f66d79cb279b5b16a84fe03f533deb
We have been using the SQL expression `name='(*Verifier).Verify' AND
error_name='not enough shares for successful audit'` thus far to detect
cases of this problem and alert on them. Unfortunately, since this
rarely (hopefully never) happens, influxdb has no data for most of the
auditor instances, and when it has no data for a time series, it returns
no columns either. This makes Redash upset when it tries to perform a
query for an alert and can't find the column whose value it expects to
check.
This change should make it so zero values are reported when the problem
has not happened, and higher values when it has.
Change-Id: I79e5e000f879678b661dac88caae1e2915b39ab1
Instead of providing the database from outside to testplanet create it
inside and then allow wrapping and modifying it. This is more convenient
to use.
Change-Id: I9b8f69e6e0a19ff984b4e2bfe927c9100c77bc6c
Make sure that suspended nodes are treated appropriately by the overlay
cache. This means we should expect the following behavior:
* suspended nodes (vetted or not) should not be selected for uploading
new segments
* suspended nodes should be treated by the checker and repairer as
"unhealthy", and should be removed upon successful repair
This commit also removes unused overlay functionality.
Fixes a bug with commit 8b72181a1f where
the audit reporter was automatically suspending nodes regardless of
audit outcome (see test added).
Tests:
* updates repair tests to ensure that a suspended node is treated as
unhealthy and will be removed from the pointer on successful repair
* updates overlay tests for KnownUnreliableOrOffline and KnownReliable
to expect suspended nodes to be considered "unreliable"
* adds satellitedb test that ensures overlay.SelectStorageNodes and
overlay.SelectNewStorageNodes do not include suspended nodes
* adds audit reporter test to ensure that different audit outcomes
result in the correct suspended/disqualified states
Change-Id: I40dba67278c8e8d2ce0bcec5e0a5cb6e4ce2f561
* change overlay.UpdateStats to allow a third audit outcome. Now it can
handle successful, failed, and unknown audits.
* when "unknown audit reputation"
(unknownAuditAlpha/(unknownAuditAlpha+unknownAuditBeta)) falls below the
DQ threshold, put node into suspension.
* when unknown audit reputation goes above the DQ threshold, remove node
from suspension.
* record unknown audits from audit reporter.
* add basic tests around unknown audits and suspension.
Change-Id: I125f06f3af52e8a29ba48dc19361821a9ff1daa1
- Previously, checkSegmentAltered only checked for segments that were replaced
but we want to detect all changes to a segment that occurred while an audit was being conducted.
- Fixed a bug where nodes failing audits during reverify for non-piece-hash-verified
segments were not being removed from containment mode.
- Filled in gaps in reverify testing to ensure nodes are properly removed from containment.
Change-Id: Icd96d369278987200fd28581395725438972b292
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb
Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
Remove starting up messages from peers. We expect all of them to start,
if they don't, then they should return an error why they don't start.
The only informative message is when a service is disabled.
When doing initial database setup then each migration step isn't
informative, hence print only a single line with the final version.
Also use shorter log scopes.
Change-Id: Ic8b61411df2eeae2a36d600a0c2fbc97a84a5b93
Remove direct dependency on uplink.RSConfig, this simplifies
moving the config file without introducing weird dependencies.
Change-Id: I7fd2a145401e0205d7047631df9d2810241efeec
* skip unknown errors (wip)
* add tests to make sure nodes that time out are added to containment
* add bad blobs store
* call "Skipped" "Unknown"
* add tests to ensure unknown errors do not trigger containment
* add monkit stats to lockfile
* typo
* add periods to end of bad blobs comments
* satellite/nodeselection: dont select nodes that havent checked in for a while
* change testplanet online window to one minute
* remove satellite reconfigure online window = 0 in repair tests
* pass timestamp into UpdateCheckIn
* change timestamp to timestamptz
* edit tests to set last_contact_success to 4 hours ago
* fix syntax error
* remove check for last_contact_success > last_contact_failure in IsOnline
* during audit Verify, return error and delete segment if segment is expired
* delete "main" reverify segment and return error if expired
* delete contained nodes and pointers when pointers to audit are expired
* update testplanet.Upload and testplanet.UploadWithConfig to use an expiration time of an hour from now
* Revert "update testplanet.Upload and testplanet.UploadWithConfig to use an expiration time of an hour from now"
This reverts commit e9066151cf84afbff0929a6007e641711a56b6e5.
* do not count ExpirationDate=time.Time{} as expired
libuplink was incorrectly setting timeouts to 10 seconds still, but
should have been at least 10 minutes. the order sender was setting them
to 1 hour. we don't want timeouts in uplink-side logic as it establishes
a minimum rate on tcp streams.
instead of all of this, just use tcp keep alive. tcp keep alive packets are
sent every 15 seconds and if the peer stops responding the connection
dies. this is enabled by default with go. this will kill tcp connections
when they stop working.
Change-Id: I3d7ad49f71950b3eb43044eedf4b17993116045b
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
* add test to make sure we will reverify the share in the containment db rather than in the pointer passed into reverify
* use pending audit information only when running reverify
* Added batch update stats for recordAuditSuccessStatus
* Added batch update stats to recordAuditFailStatus
* added configurable batch size
* build individual update/delete statements so the statements can be batched into 1 call to the DB
* notified #config-changes channel and ran make update-satellite-config-lock
* updated tests to use batch update stats
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
