Commit Graph

37 Commits

Author SHA1 Message Date
paul cannon
2522ff09b6 satellite/overlay: configurable meaning of last_net
Up to now, we have been implementing the DistinctIP preference with code
in two places:

 1. On check-in, the last_net is determined by taking the /24 or /64
    (in ResolveIPAndNetwork()) and we store it with the node record.
 2. On node selection, a preference parameter defines whether to return
    results that are distinct on last_net.

It can be observed that we have never yet had the need to switch from
DistinctIP to !DistinctIP, or from !DistinctIP to DistinctIP, on the
same satellite, and we will probably never need to do so in an automated
way. It can also be observed that this arrangement makes tests more
complicated, because we often have to arrange for test nodes to have IP
addresses in different /24 networks (a particular pain on macOS).

Those two considerations, plus some pending work on the repair framework
that will make repair take last_net into consideration, motivate this
change.

With this change, in the #2 place, we will _always_ return results that
are distinct on last_net. We implement the DistinctIP preference, then,
by making the #1 place (ResolveIPAndNetwork()) more flexible. When
DistinctIP is enabled, last_net will be calculated as it was before. But
when DistinctIP is _off_, last_net can be the same as address (IP and
port). That will effectively implement !DistinctIP because every
record will have a distinct last_net already.

As a side effect, this flexibility will allow us to change the rules
about last_net construction arbitrarily. We can do tests where last_net
is set to the source IP, or to a /30 prefix, or a /16 prefix, etc., and
be able to exercise the production logic without requiring a virtual
network bridge.

This change should be safe to make without any migration code, because
all known production satellite deployments use DistinctIP, and the
associated last_net values will not change for them. They will only
change for satellites with !DistinctIP, which are mostly test
deployments that can be recreated trivially. For those satellites which
are both permanent and !DistinctIP, node selection will suddenly start
acting as though DistinctIP is enabled, until the operator runs a single
SQL update "UPDATE nodes SET last_net = last_ip_port". That can be done
either before or after deploying software with this change.

I also assert that this will not hurt performance for production
deployments. It's true that adding the distinct requirement to node
selection makes things a little slower, but the distinct requirement is
already present for all production deployments, and they will see no
change.

Refs: https://github.com/storj/storj/issues/5391
Change-Id: I0e7e92498c3da768df5b4d5fb213dcd2d4862924
2023-03-09 02:20:12 +00:00
JT Olio
77bf88e916 satellite/overlay: check node difficulty before entering database
closes https://github.com/storj/storj/issues/5568

Change-Id: Id413637c2678e7a7cf8dbf414e082c687c8e8a39
2023-02-15 17:46:25 +00:00
Cameron
d856569935 satellite/overlay: node software update email cooldown config
Change-Id: I792eef4a570e38e94f79a3f73c204b65f86ab541
2022-11-11 20:14:25 +00:00
Cameron
a52f766273 satellite/overlay: add email-sending functionality to overlay service
We want to send emails to SNOs. Node status changes go through the
overlay service, so it's a good place to add the mail service.
Add the mailservice.Service, satellite address, and satellite name to
overlay service. Also add feature flag --overlay.send-node-emails

Change-Id: I3bd2cb3bf22f9724954ce2374f8b651b902b3a24
2022-10-13 18:01:05 +00:00
Egon Elbre
65b5a0fe82 satellite/{overlay,satellitedb}: add AS OF to download selection
This should reduce the load caused by download selection queries.

Change-Id: Ic1a89d9c3eb5418f0792eb20ec2aece18dc63f2c
2022-06-28 05:18:01 +00:00
Moby von Briesen
b2d342aa9b satellite/overlay: Add ability to exclude country codes on upload
Create global config to specify a list of country codes that should be
excluded from node selection during uploads.

This exclusion is not implemented when the upload selection cache is
disabled.

Change-Id: Ic41e8b4f18857a11045668eac23107da99668a72
2022-03-03 16:58:48 +00:00
Fadila Khadar
e776c65172 satellite/checker: pieces in excluded countries are not healthy
Add a RepairExcludedCountryCodes config flag for overlay for providing a list of country codes to exclude nodes from target repair selection.

Mark segments with less than repairThreshold pieces in countries not in the RepairExcludedCountryCodes as not healthy.
With this change, the repair process is not affected. The segment will be removed from the repair queue by the repairer.

Another change will handle the logic at the repairer level.

Fixes https://github.com/storj/team-metainfo/issues/95

Change-Id: I9231b32de117a116488de055a3e94efcabb46e81
2022-03-02 09:59:09 +00:00
Mya
bf51c286d9
satellite/geoip: update node check-in to associate a country code
Resolves https://github.com/storj/storj/issues/4247

Change-Id: Idfd71bf1795d48ca3c686066bbdb95b9c6594f00
2021-11-10 16:44:41 +01:00
Yingrong Zhao
646ce5b8cc satellite/overlay: remove reputation logic from overlay
Change-Id: I3492860e4537c7a8e4e824ec4c9c8d179134a0c0
2021-07-28 15:15:28 -04:00
Cameron Ayer
8c124c6fa4 satellite/{reputation,overlay,satellitedb}: create reputation service, DB, add overlay method UpdateReputation
Define service and DB interface for storing node reputation data
and updating the overlay cache.
Add overlay service and DB method UpdateReputation.
See https://github.com/storj/storj/pull/4144

Change-Id: Iedd8bd3274457d26c595919303d55327c1464b8c
2021-06-24 16:19:15 +00:00
Egon Elbre
59e3b586e7 satellite/{gracefulexit,overlay}: enable as of system time queries
Change-Id: I2af5eb0e8a51fca7893ce07b78b5633be71dfef8
2021-06-22 11:50:50 +00:00
Jeremy Wharton
8a070e7c25 satellite/overlay: Ignore unnecessary check-ins
This prevents the database from being contacted unnecessarily,
reducing load.

Change-Id: Ib2420f68a20636ec35eb3dd3df8e02bd5341b419
2021-06-22 09:00:41 +00:00
JT Olio
da9ca0c650 testplanet/satellite: reduce the number of places default values need to be configured
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.

As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.

This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.

In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.

Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
2021-06-01 22:14:17 +00:00
Egon Elbre
961e841bd7 all: fix error naming
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:

    ERROR node stats service error: satellitedbs error: node stats database error: no rows

Whereas something like:

    ERROR nodestats service: satellitedbs: nodestatsdb: no rows

Would contain all the necessary information without the stutter.

Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
2021-04-29 15:38:21 +03:00
Cameron Ayer
1a51049ac0 satellite/{overlay,satellitedb}: add flag to toggle suspending nodes for offline audits
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.

If the flag is set to true, nodes will be suspended if they meet the
requirements.

If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.

Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
2021-03-27 16:28:27 +00:00
Egon Elbre
19e3dc4ec0 satellite/overlay: rename NodeSelectionCache to UploadSelectionCache
It wasn't obvious that NodeSelectionCache was only for uploads.

Change-Id: Ifeeaa6fdb50a4b7916245b48d8634d70ac54459c
2021-01-28 14:56:53 +02:00
Cameron Ayer
d14607a5f7 satellite/{contact,nodestats,overlay,satellitedb}: remove references to total_uptime_count and uptime_success_count columns
Change-Id: I1f92022909bc564e9b1e31bf937fdfe7c16554de
2021-01-19 15:43:02 -05:00
Ethan Adams
6070018021
satellite/overlay: use AS OF SYSTEM TIME with Cockroach
Query nodes table using AS OF SYSTEM TIME '-10s' (by default) when on CRDB to alleviate contention on the nodes table and minimize CRDB retries. Queries for standard uploads are already cached, and node lookups for graceful exit uploads has retry logic so it isn't necessary for the nodes returned to be current.
2020-12-22 21:07:07 +02:00
Moby von Briesen
7c3afe164b satellite/overlay: uncomment dq for offline and disable with feature flag
Change-Id: Ib39e2be32e880b822a94eddfb81af99a38843a27
2020-10-16 12:55:16 +00:00
Jennifer Johnson
4e2413a99d satellite/satellitedb: uses vetted_at field to select for reputable nodes
Additionally, this PR changes NewNodeFraction devDefault and testplanet config from 0.05 to 1.
This is because many tests relied on selecting nodes that were reputable based on audit and uptime
counts of 0, in effect, selecting new nodes as reputable ones.
However, since reputation is now indicated by a vetted_at db field that is explicitly set
rather than implied by audit and uptime counts, it would be more complicated to try to
update all of the nodes' reputations before selecting nodes for tests.
Now we just allow all test nodes to be new if needed.

Change-Id: Ib9531be77408662315b948fd029cee925ed2ca1d
2020-09-04 16:45:32 +00:00
Egon Elbre
94a09ce20b all: add missing dots
Change-Id: I93b86c9fb3398c5d3c9121b8859dad1c615fa23a
2020-08-11 17:50:01 +03:00
Qweder93
4ee1b2d45a storagenode/console: added list of all audits per satellite to sno dashboard/satellites
Change-Id: I52e58748d6467f372d9a308347fc77e400d137e2
2020-08-10 12:55:07 +00:00
Moby von Briesen
e02adfe5e9 satellite/overlay/config.go: Add AuditHistoryConfig to overlay
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.

Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
2020-08-04 18:18:56 +00:00
Egon Elbre
080ba47a06 all: fix dots
Change-Id: I6a419c62700c568254ff67ae5b73efed2fc98aa2
2020-07-16 14:58:28 +00:00
littleskunk
2fbb34c3ea
nodeselection: Increase minimum free space to 500MB (#3898) 2020-05-25 12:13:28 +02:00
Moby von Briesen
8f60cfc4fb satellite/overlay: Add flag for enabling/disabling disqualification from suspension mode
Add a flag that allows us to easily switch disqualification from
suspension mode on or off. A node will only be disqualified from
suspension mode if it has been suspended for longer than the grace
period AND the SuspensionDQEnabled flag is true.

Change-Id: I9e67caa727183cd52ab2042b0a370a1bcaebe792
2020-05-04 17:25:09 +00:00
Jess G
825226c98e
satellite/overlay: use node selection cache for uploads (#3859)
* satellite/overlay: use node selection cache for uploads

Change-Id: Ibd16cccee979d0544f2f4a01749af9f36f02a6ad

* fix config lock

Change-Id: Idd307e4dee8ab92749f1ec3f996419ea0af829fd

* start fixing tests

Change-Id: I207d373a3b2a2d9312c9e72fe9bd0b01e06ad6cf

* fix test, add some more

Change-Id: I82b99c2004fca2510965f9b389f87dd4474bc722

* change config name

Change-Id: I0c0f7fc726b2565dc3828cb723f5459a940f2a0b

* add benchmarks

Change-Id: I05fa25bff8d5b65f94d918556855b95163d002e9

* revert bench to put in different PR

Change-Id: I0f6942296895594768f19614bd7b2e3b9b106ade

* add staleness to benchmark

Change-Id: Ia80a310623d5a342afa6d835402170b531b0f870

* add cache config to testplanet

Change-Id: I39abdab8cc442694da543115a9e470b2a8a25dff

* have repair select old way

Change-Id: I25a938457d7d1bcf89fd15130cb6b0ac19585252

* lower testplante config time

Change-Id: Ib56a2ed086c06bc6061388d15a10a2526a663af7

* fix test

Change-Id: I3868e9cacde2dfbf9c407afab04dc5fc2f286f69
2020-04-24 09:11:04 -07:00
Moby von Briesen
72b93f3120 satellite/satellitedb: disqualify suspended nodes when the grace period passes
If a node is suspended and receives an unknown or failing audit,
disqualify them if the grace period (default 1w in production) has
passed.

Migrate the nodes table so any node that is currently suspended gets
unsuspended when the satellite starts up.

Change-Id: I7b81c68026f823417faa0bf5e5cb5e67c7156b82
2020-04-22 15:45:00 -04:00
Moby von Briesen
d7794a4851 satellite/overlay: hardcode default values for audit alpha/beta
Alpha=1 and beta=0 are the expected first values for any alpha/beta
reputation system we are using in the codebase. So we are removing the
configurability of these values.

Change-Id: Ic61861b8ea5047fa1438ea6609b1d0048bf0abc3
2020-04-14 19:12:40 +00:00
Jennifer Johnson
699b635e5d satellite/overlay: rename newNodePercentage to newNodeFraction
Change-Id: Ie66de91f88183b44de0773589e83e4ade9aa997a
2020-03-19 20:09:32 +00:00
Cameron Ayer
b22bf16b35 satellite/overlay: add config flag for node selection free disk requirement
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.

Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
2020-02-11 18:08:25 +00:00
Jeff Wendling
7999d24f81 all: use monkit v3
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.

graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.

it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.

Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
2020-02-05 23:53:17 +00:00
Yingrong Zhao
76ee8a1b4c satellite: remove UptimeReputation configs from codebase
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb

Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
2020-01-08 18:54:15 +00:00
Jennifer Li Johnson
ce3203e910
update NodeSelectionConfig.OnlineWindow to 4hr default (#3082) 2019-09-18 14:57:57 -04:00
Egon Elbre
c8edeb0257
satellite/overlay: rename overlay.Cache to overlay.Service (#2717) 2019-08-06 19:35:59 +03:00
ethanadams
c9b46f2fe2
V3-1987: Optimize audits stats persistence (#2632)
* Added batch update stats for recordAuditSuccessStatus
* Added batch update stats to recordAuditFailStatus
* added configurable batch size
* build individual update/delete statements so the statements can be batched into 1 call to the DB
* notified #config-changes channel and ran make update-satellite-config-lock
* updated tests to use batch update stats
2019-07-31 13:21:06 -04:00
Egon Elbre
5d0816430f
rename all the things (#2531)
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
2019-07-28 08:55:36 +03:00