* test that all nodes can check in with all satellites
* keep kademlia config
* add untrusted satellite test
* use getversion
* remove kademlia config changes in test-sim-backwards.sh
* add kademlia flags back to storj-sim storagenode
* reset kademlia flags in storagenode entrypoint
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* Adjust arm32v6 and aarch64 docker images to match the hello-world image
* Update from master, fix potential bug in push-images target, and update storagenode deploy to handle arm64 image
Creates a new chore, dbcleanup, which can be used for routine deletion of items from the satellite database and adds functionality for deletion of expired serial numbers
* + add git worktree cleanup
+ specify commit in git worktree add
* fail backwards compatibility test if no postgres
* fix typo
* rm dir after worktree rm
* add jenkins runs backwards compat test, fix sa config issue
* try to use current branch
* add jenkins stage condition of branch name
* try when with branch env var
* only run test on master branch
* fix != to ==
* add comment, fix indentation
* run for all branches
* make comment more specific
* add stage to jenkins, add script for backwards compat tests
* debug backwards compat tests
* add setup in a script
* set env vars
* add more env ars
* mv to one script to debug
* debug api key problem
* add tmp dir
* rm print statements
What: Change cmd/uplink to use scopes
It moves the fields that will be subsumed by scopes into an explicit legacy section and hides their configuration flags.
Why: So that it can read scopes in from files and stuff
* Added batch update stats for recordAuditSuccessStatus
* Added batch update stats to recordAuditFailStatus
* added configurable batch size
* build individual update/delete statements so the statements can be batched into 1 call to the DB
* notified #config-changes channel and ran make update-satellite-config-lock
* updated tests to use batch update stats
* Added a gc package at satellite/gc, which contains the gc.Service, which runs garbage collection integrated with the metainfoloop, and the gc PieceTracker, which implements the metainfo loop Observer interface and stores all of the filters (about which pieces are good) for each node.
* Added a gc config located at satellite/gc/service.go (loop disabled by default in release)
* Creates bloom filters with pieces to be retained inside the metainfo loop
* Sends RetainRequests (or filters with good piece ids) to all storage nodes.
* pkg/datarepair: Add test to check num upload pieces
Add a new test for ensuring the number of pieces that the repair process
upload when a segment is injured.
* satellite/orders: Don't create "put order limits" over total
Repair must not create "put order limits" more than the total count.
* pkg/datarepair: Update upload repair pieces test
Update the test which checks the number of pieces which are uploaded
during a repair for using the same excess over the success threshold
value than the implementation.
* satellites/orders: Limit repair put order for not being total
Limit the number of put orders to be used by repair for only uploading
pieces to a % excess over the successful threshold.
* pkg/datarepair: Change DataRepair test to pass again
Make some changes in the DataRepair test to make pass again after the
repair upload repaired pieces only until a % excess over success
threshold.
Also update the steps description of the DataRepair test after it has been
changed, to match on what's now, besides to leave it more generic for
avoiding having to update it on minimal future refactorings.
* satellite: Make repair excess optimal threshold configurable
Add a new configuration parameter to the satellite for being able to
configure the percentage excess over the optimal threshold, used for
determining how many pieces should be repaired/uploaded, rather than
having the value hard coded.
* repairer: Add configurable param to segments/repairer
Add a new parameters to the segment/repairer to calculate the maximum
number of excess nodes, based on the optimal threshold, that repaired
pieces can be uploaded.
This new parameter has been added for not returning more nodes than the
number of upload orders for data repair satellite service calculate for
repairing pieces.
* pkg/storage/ec: Update log message in clien.Repair
* satellite: Update configuration lock file
* pkg/process/metrics: add an instance prefix
the distinction between which satellite is sending which
data should go in the instance field, not the suffix or application
fields. (un)fortunately, the instance id is deliberately not
configurable because we don't want it to be easy to accidentally
have multiple applications collide with the same instance id.
so we're currently stuffing the human readable instance in the
suffix. :(
perhaps a reasonable tradeoff would be an optional instance
prefix that allows operators to put their domain name in
the instance
Change-Id: I6fcc8498be908c5740439cc00f77474ad151febd
* linting
Change-Id: I9f9a44fa9a2634ef5e4f89548d42d57ce9e4450e
* move offer out of marketing package and remove marketing package
* fix imports
* fix rename errors
* remove offer service
* change package name from offers to rewards
* fix linting
* remove unused code and use appropriate comment
* scripts/tag-release.sh: libuplink release tagging
a couple of arch review meetings ago we discussed how to make sure
that it is much easier to get the release defaults for binaries,
libraries, and so on. we already imperfectly solved the binary
problem with the release.sh script, but (until now!) have not solved
the problem of getting release defaults for people building from
source.
the solution we seemed to all prefer was to make sure our tagged
version commits check the release state into the source code.
this script aides in tagging commits with version tags and
updating the source defaults. it still plays nicely with
release.sh and our other build processes.
after this is merged we should configure github/go modules to
prefer people use one of our tags instead of master (which will
keep dev defaults).
Change-Id: I36c5c33a1bc90ec1685f59b05dde779090e252b6
* gofmt release.go
Change-Id: I6e968eff86230496e9cbddecd767ca8d8ff36ba4
* regex for version tag
Change-Id: Icaa6d753ffc962115d961bcabe9daed89b16430c
* added some docs
Change-Id: Ide624fab794ce849e3a3e7254fb038251bba0c71
* add voucher service on storage node
* config field tag syntax, go routines for requests
* hook up voucher service in storagenode/peer.go
* add voucher config to testplanet
* add voucher config to testplanet
* add voucher response status INVALID, ACCEPTED, REJECTED
* add a test for vouchers service
* handle no row from GetValid, test it
* add trust pool to voucher service
* use trusted list to get satellites
* verify vouchers upon receipt
* test VerifyVoucher
* set to only listen on 127.0.0.1, move static files to same location, better template handling
* handle error
* fix path in storj-sim
* revert template handling changes
* code shouldn't panic on invalid tempalte
* do not rewrite once writing has started
* write correct error code
* use filepath for path handling
* revert change
* fix
* fix mod tidy
* use correct error code for not found, avoid infinite loop on failure
* Set up new port 8090 for in offers
Clean up commented code
Rename offers to offersweb
Remove unused code
Add todos for adding front-end templates
Add middleware for only allow local access
Add comment
Fix linting error
Remove commented code
Update storj-sim
Check request IP against Host IP
Use net pakcage to retrieve IP address
Rename service to marketing
* Add wrapper for all errors
* fix conflicts
* update the config file
* fix linting error
* remove unused packages
* remove global runtime var and add flag to storj-sim for mar static dir
* remove debugging lines
* add new config for test data and check if static dir flag is set before passing to mux
* change 'console' to 'marketing' for test data config
* fix linting errors
* update config flag
* Trigger Jenkins
* Trigger CLA
* reputation: Add configuration parameters
Add the configuration parameters which will be used by the algorithm
which will calculate the storage node reputation.
Because the reputation calculation is based on audit and uptime check
results some configuration parameters are in pkg/audit, others in
pkg/discovery and other in the satellite which will combine the both
reputation results to obtain the storage node reputation for repair and
uplink.
* satellite-config: Refresh lock file with new params
Refresh the Satellite configuration yaml lock file with the new
parameters added in this branch.
* uplink: Mark encryption key config field for setup
Set the "setup" property to the `EncryptionConfig.EncrptionKey` for
avoiding to save it in the configuration file.
This field is only meant for using in the command line parameters which
need to use a different encryption key than the one present in the key
file or use it when there is not set any encryption key file path.
* cmd/uplink: Setup non-interactive accept enc key
Change the uplink CLI setup command non-interactive to save the
encryption key into a file when it's passed through the flag
--enc.encryption-key
Previous to this change it wasn't possible to create an key file despite
of that the flag was provided, so it was useless on the setup command.
* cmd/uplink: Reuse logic to read pwd from terminal
Reuse the logic which is already implemented in the pkg/cfgstruct for
reading a password from the terminal on interactive mode, rather than
duplicating it in the setup command.
* cmd/gateway: Use encryption key file flags
The cmd/gateway was still using the `enc.key` configuration field which
doesn't exist anymore and its setup command wasn't using the
`enc.key-filepath` with combination of the `enc.encryption-key` for
generating a file with the encryption key.
This commit update the cmd/gateway appropriately and move to the uplink
package the function used by cmd/uplink to save the encryption key for
allowing to also be used by the cmd/gateway without duplicating the
logic.
* cmd/storj-sim: Adapt gateway config cmd changes
Adapt the cmd/storj-sim to correctly pass the parameters to the
cmd/gateway setup and run command.
* scripts: Don't pass the --enc.encryption-key flag
uplink configuration has changed to only support the
`--enc.encryption-key` flag for setup commands and consequently the
cmd/uplink and cmd/gateway don't accept this flag over other commands,
hence the test for the uplink had to be updated for no passing the
flag on the multiples calls that the test do to cmd/uplink.
* uplink: Remove func which aren't useful anymore
Remove the function which allows to user or load an encryption key
because it isn't needed anymore since the `--enc.encryption-key` flag is
only available for the setup command.
Consequently remove its usage from cmd/uplink and cmd/gateway, because
such flag will always be empty because in case that's passed Cobra will
return an error due to a "unknown flag".
* init marketing service
Fix linting error
Create offerdb implementation
Create offers service
Add update method
Create offer table and migration
Fix linting error
fix conflicts
Insert new data
Change duration to have clear indication to be based on days
add error wrapper
Change from using uuid to int for id field
* Create Marketing service
* make error virable name more readable
* add condition in update service method to check offer status
* generate lock file
Change get to listAllOffers
* Add method for getting current offer
wip
* add check for expires_at in update method
* Fix conflicts
* add copyright header
* Fix linting error
* only allow update to active offers
* add isDefault argument to GetCurrent
* Update lock file
* add migration file
* finish migrate for adding credit_in_cents for both award and invitee
* save 100 years as expiration date for default offers
* create crud test for offers
* add GetCurrent test
* modify doc
* Fix GetCurrent to work with default offer
* fix linting issue
* add more tests and address feedbacks
* fix migration file
* add type column back to match with mockup design
* add type column back to match with mockup design
* move doc changes to new pr
* add comments
* change GetCurrent to GetCurrentByType
* fix typo
What: this will make it so release binaries default to whatever-release instead of whatever-dev in metrics collection
Why: So we can monitor release binaries with default configuration without getting drowned out by dev binaries
* set up voucher service skeleton, basic test
* add VetNode db method
* basic test for VetNode
* encode and sign voucher functions
* fill out and sign vouchers
* test pass/fail voucher request
* match EncodeVoucher to other Encode functions
* add aws s3 benchmark script
* add s3 benchmark tests
* rearrange so smaller diff, fix spelling
* add configurable uplink config for s3-benchmark
* make new bucket w/unique name for each s3 test
* changes per CR
* update uplink cmd args
* add uplod/download benchmark, add script to run benchmarks
* fix lint err
* changes per CR comments
* export env var for linux
* fix lint
* add byte count to bench test
* add last_ip field to dbx model node, generate dbx
* add last_ip to node proto, generate pb
* migrate
* resolve address in transport.DialNode, update lastIp in cache.UpdateAddress
* use net.SplitHostPort to isolate host address from port
* define DistinctIPs flag
* add test for GetIP
* select last_ip when querying for nodes
* if distinctIPs flag == true, query for nodes with distinct IPs
* some basic tests
* change last_ip to field 14 in proto
* remove comments
* check err
* change distinctIPs to distinctIP
* exclude IPs from newNodes in query for reputable nodes
* add index on last_ip
* only add to excludedIPs if flag is true
* test half new nodes returns distinct IPs
* fix alignment
* add test
* rework ip filter query, add retry logic, add switch for database driver
* add retry to SelectNewNodes
* change discovery intervals so IPs don't get overwritten
* remove TestGetIP
* edit updating node stats in test
* split exclude into nodeIDs and IPs
* separate non-distinct IP query into other function
* trigger checks
* remove else block
* uplink: Add a new flag to set the filepath of the file which is used for
saving the encryption key and rename the one that hold the encryption key and
establish that it has priority over the key stored in the file to make the
configuration usable without having a huge refactoring in test-sim.
* cmd/uplink: Adapt the setup subcommand for storing the user input key to a file
and adapt the rest of the subcommands for reading the key from the key-file when
the key isn't explicitly set with a command line flag.
* cmd/gateway: Adapt it to read the encryption key from the key-file or use the
one passed by a command line flag.
* pkg/process: Export the default configuration filename so other packages which
use the same value can reference to it rather than having it hardcoded.
* Adapt several integrations (scripts, etc.) to consider the changes applied in uplink and cmd packages.
* add flags to sotrj-sim for SA dbs
* add schema to postgres
* add createschema with parse to sa
* add metainfo db postgres support
* add kv default as bolt
* add debug log to see db source
* add env var for postgres to test-sim.sh
* fix lint errs
* dynamically add postgres to args
* add postgres to integration tests
* add sqlite and postgres integration jenkins
* fix db name
* merge integration tests into one step
* test integration tests w/psql
* try using different schema
* debug failure
* use correct host for running storj-sim
* rm sqlite integration
* add back integration
Ran into difficulties trying to find the ideal solution for sharing
these counts between multiple satellite servers, so for now this is a
dumb solution storing recent space-usage changes in a big dumb in-memory
map with a big dumb lock around it. The interface used, though, should
allow us to swap out the implementation without much difficulty
elsewhere once we know what we want it to be.
* scripts: check for satellite configuration changes
Create a simple script that checks if the satellite configuration has
differed with the last changes.
* Makefile: add target to check satellite cfg changes
Add a Makefile target which executes the script that checks if the last
changes has made a change in the satellite configuration.
* ci: add satellite cfg check on integration stage
* FIXUP: use releae defaults rather than development ones
* FIXUP: show the message when config differs & some cleanups
* scripts: add script to update the satellite cfg lock
Add a script for allowing to update the satellite configuration lock
file and add Makefile target to run it.
* scripts/testsdata: update satellite cfg lock
Update the satellite configuration lock file with the last changes that
satellite has suffered upstream.
* initial test
* add parenthesis
* remove pipeline
* add few todos
* use docker image for environment
* use pipeline
* fix
* add missing steps
* invoke with bash
* disable protoc
* try using golang image
* try as root
* Disable install-awscli.sh temporarily
* Debugging
* debugging part 2
* Set absolute path for debugging
* Remove absolute path
* Dont run as root
* Install unzip
* Dont forget to apt-get update
* Put into folder that is in PATH
* disable IPv6 Test
* add verbose info and check protobuf
* make integration non-parallel
* remove -v and make checkout part of build
* make a single block for linting
* fix echo
* update
* try using things directly
* try add xunit output
* fix name
* don't print empty lines
* skip testsuites without any tests
* remove coverage, because it's not showing the right thing
* try using dockerfile
* fix deb source
* fix typos
* setup postgres
* use the right flag
* try using postgresdb
* expose different port
* remove port mapping
* start postgres
* export
* use env block
* try using different host for integration tests
* eat standard ports
* try building images and binaries
* remove if statement
* add steps
* do before verification
* add go get goversioninfo
* make separate jenkinsfile
* add check
* don't add empty packages
* disable logging to reduce output size
* add timeout
* add comment about mfridman
* Revert Absolute Path
* Add aws to PATH
* PATH Changes
* Docker Env Fixes
* PATH Simplification
* Debugging the PATH
* Debug Logs
* Debugging
* Update PATH Handling
* Rename
* revert changes to Jenkinsfile
* Initial Webserver Draft for Version Controlling
* Rename type to avoid confusion
* Move Function Calls into Version Package
* Fix Linting and Language Typos
* Fix Linting and Spelling Mistakes
* Include Copyright
* Include Copyright
* Adjust Version-Control Server to return list of Versions
* Linting
* Improve Request Handling and Readability
* Add Configuration File Option
Add Systemd Service file
* Add Logging to File
* Smaller Changes
* Add Semantic Versioning and refuses outdated Software from Startup (#1612)
* implements internal Semantic Version library
* adds version logging + reporting to process
* Advance SemVer struct for easier handling
* Add Accepted Version Store
* Fix Function
* Restructure
* Type Conversion
* Handle Version String properly
* Add Note about array index
* Set temporary Default Version
* Add Copyright
* Adding Version to Dashboard
* Adding Version Info Log
* Renaming and adding CheckerProcess
* Iteration Sync
* Iteration V2
* linting
* made LogAndReportVersion a go routine
* Refactor to Go Routine
* Add Context to Go Routine and allow Operation if Lookup to Control Server fails
* Handle Unmarshal properly
* Linting
* Relocate Version Checks
* Relocating Version Check and specified default Version for now
* Linting Error Prevention
* Refuse Startup on outdated Version
* Add Startup Check Function
* Straighten Logging
* Dont force Shutdown if --dev flag is set
* Create full Service/Peer Structure for ControlServer
* Linting
* Straighting Naming
* Finish VersionControl Service Layout
* Improve Error Handling
* Change Listening Address
* Move Checker Function
* Remove VersionControl Peer
* Linting
* Linting
* Create VersionClient Service
* Renaming
* Add Version Client to Peer Definitions
* Linting and Renaming
* Linting
* Remove Transport Checks for now
* Move to Client Side Flag
* Remove check
* Linting
* Transport Client Version Intro
* Adding Version Client to Transport Client
* Add missing parameter
* Adding Version Check, to set Allowed = true
* Set Default to true, testing
* Restructuring Code
* Uplink Changes
* Add more proper Defaults
* Renaming of Version struct
* Dont pass Service use Pointer
* Set Defaults for Versioning Checks
* Put HTTP Server in go routine
* Add Versioncontrol to Storj-Sim
* Testplanet Fixes
* Linting
* Add Error Handling and new Server Struct
* Move Lock slightly
* Reduce Race Potentials
* Remove unnecessary files
* Linting
* Add Proper Transport Handling
* small fixes
* add fence for allowed check
* Add Startup Version Check and Service Naming
* make errormessage private
* Add Comments about VersionedClient
* Linting
* Remove Checks that refuse outgoing connections
* Remove release cmd
* Add Release Script
* Linting
* Update to use correct Values
* Change Timestamp handling
* Adding Protobuf changes back in
* Adding SatelliteDB Changes and adding Storj Node Version to PB
* Add Migration Table
* Add Default Stats for Creation
* Move to BigInt
* Proper SQL Migration
* Ensure minimum Version is passed to the node selection
* Linting...
* Remove VersionedClient and adjust smaller changes from prior merge
* Linting
* Fix PB Message Handling and Query for Node Selection
* some future-proofing type changes
Change-Id: I3cb5018dcccdbc9739fe004d859065992720caaf
* fix a compiler error
Change-Id: If66bb92d8b98e31cd618ecec9c6448ab9b037fa5
* Comment on Constant for Overlay
* Remove NOT NULL and add epoch call as function
* add versions to bootstrap and satellites
Change-Id: I436944589ea5f21600cdd997742a84fe0b16e47b
* Change Update Migration
* Fix DB Migration
* Increase Timeout temporarily, to see whats going on
* Remove unnecessary const and vars
Cleanup Function calls from deprecated NodeVersion struct
* Updated Protopuf, removed depcreated Code from Inspector
* Implement NodeVersion into InfoResponse
* Regenerated locked.go
* Linting
* Fix Tests
* Remove unnecessary constant
* Update Function and Flag Description
* Remove Empty Stat Creation
* return properly with error
* Remove unnecessary struct
* simplify migration step
* Update Inspector to return Version Info
* Update local Endpoint Version Handling
* Reset Travis Timeout
* Add Default for CommitHash
* single quotes
* releases: update alpha dockerfiles to embed release tags
Change-Id: I2978d3ed77d1b768be24ec9194bc404cd92e4700
* release script use plain shell
Change-Id: Ie4ca6633014e3bf00ac0c82e28905174a6ade95b
* removed /scripts from .dockerignore
Change-Id: Ib555236d62fb3dc354689284ac4a032d5b4b3aa8
* switch back to bash
Change-Id: Ie0958cde71cd396f44ac28c177f48df0bea7ba22
* fix go1.12 modules
Change-Id: If4c8364e7271f09febd1a6c8bfc731d723d344d9
* make sure the work tree is clean
Change-Id: Ie6e52af28e2bc52880d92a3b574d1f859fc8e88e
* Initial Webserver Draft for Version Controlling
* Rename type to avoid confusion
* Move Function Calls into Version Package
* Fix Linting and Language Typos
* Fix Linting and Spelling Mistakes
* Include Copyright
* Include Copyright
* Adjust Version-Control Server to return list of Versions
* Linting
* Improve Request Handling and Readability
* Add Configuration File Option
Add Systemd Service file
* Add Logging to File
* Smaller Changes
* Add Semantic Versioning and refuses outdated Software from Startup (#1612)
* implements internal Semantic Version library
* adds version logging + reporting to process
* Advance SemVer struct for easier handling
* Add Accepted Version Store
* Fix Function
* Restructure
* Type Conversion
* Handle Version String properly
* Add Note about array index
* Set temporary Default Version
* Add Copyright
* Adding Version to Dashboard
* Adding Version Info Log
* Renaming and adding CheckerProcess
* Iteration Sync
* Iteration V2
* linting
* made LogAndReportVersion a go routine
* Refactor to Go Routine
* Add Context to Go Routine and allow Operation if Lookup to Control Server fails
* Handle Unmarshal properly
* Linting
* Relocate Version Checks
* Relocating Version Check and specified default Version for now
* Linting Error Prevention
* Refuse Startup on outdated Version
* Add Startup Check Function
* Straighten Logging
* Dont force Shutdown if --dev flag is set
* Create full Service/Peer Structure for ControlServer
* Linting
* Straighting Naming
* Finish VersionControl Service Layout
* Improve Error Handling
* Change Listening Address
* Move Checker Function
* Remove VersionControl Peer
* Linting
* Linting
* Create VersionClient Service
* Renaming
* Add Version Client to Peer Definitions
* Linting and Renaming
* Linting
* Remove Transport Checks for now
* Move to Client Side Flag
* Remove check
* Linting
* Transport Client Version Intro
* Adding Version Client to Transport Client
* Add missing parameter
* Adding Version Check, to set Allowed = true
* Set Default to true, testing
* Restructuring Code
* Uplink Changes
* Add more proper Defaults
* Renaming of Version struct
* Dont pass Service use Pointer
* Set Defaults for Versioning Checks
* Put HTTP Server in go routine
* Add Versioncontrol to Storj-Sim
* Testplanet Fixes
* Linting
* Add Error Handling and new Server Struct
* Move Lock slightly
* Reduce Race Potentials
* Remove unnecessary files
* Linting
* Add Proper Transport Handling
* small fixes
* add fence for allowed check
* Add Startup Version Check and Service Naming
* make errormessage private
* Add Comments about VersionedClient
* Linting
* Remove Checks that refuse outgoing connections
* Remove release cmd
* Add Release Script
* Linting
* Update to use correct Values
* Move vars private and set minimum default versions for testing builds
* Remove VersionedClient
* Better Error Handling and naked return removal
* Straighten the Regex and string conversion
* Change Check to allows testplanet and storj-sim to run without the
need to pass an LDFlag
* Cosmetic Change to Dashboard
* Cleanup Returns and remove commented code
* Remove Version Check if no build options are passed in
* Pass in Config Values instead of Pointers
* Handle missed Error
* Update Endpoint URL
* Change Type of Release Flag
* Add additional Logging
* Remove Versions Logging of other Services
* minor fixes
Change-Id: I5cc04a410ea6b2008d14dffd63eb5f36dd348a8b
* test-network-stalls tests... network stalls!
in particular, right now, it just tests whether an uplink correctly
times out after some amount of time when one of the nodes it's talking
to suddenly goes offline.
This tool is meant to be run under `storj-sim network test`.
Also included here:
* fix storj-sim-related test scripts on Mac
the default storj config dir on Mac has a space in it
('~/Library/Application Support/Storj'), which breaks everywhere it
shows up in an unquoted variable in a sh/bash script. easy enough to fix
as a one-off, but quoting bash vars avoids a dozen other potential
problems too.
change a few things using `head -c` to use `dd`. `head -c` works,
but is not as widely understood (as evidenced by each of these scripts
getting through code review, one at a time, with the comments not
matching the numbers actually used).
* storj-sim reports PIDs of worker processes to test
so that the tests can cause unfortunate "accidents" to befall the worker
processes in the course of the test, and find out whether everything
reacts correctly.
* initial wireup of test script
* making some progress
* working on getting gateway config to work
* get script working for testing uplink
* removes unnecessary stuff
* more removal of unnecessary change
* remove unnecessary pointerdb set in setup
* fix dest dir in test-aws script
* Add test for aio
* Don't trust the user to have images built for a version
* Make travis run the aio test
* Add missing values to docker-compose, sort some things, consider the gateway image
* today's changes
* config changed, again
* more fixes
* Expose satellite port on localhost:7778
* Add retries and a timeout around the big-testfile test in AIO
* Another config value changed
* Make this error message a little more useful
* Fix nil condition
* WIP possible discovery service impl
* Adds discovery service to CaptPlanet
* Updates the config and server for discovery service
* updates testplanet to use discovery package
* update satellite imports
* Removes unnecessary cache test
* linter fixes
* adds discovery startup to captplanet
* invoke refresh
* updates to discovery refresh cycle
* Make implementation more consistent with previous implementation
* add wait before trying to upload
* sleep a bit more
* remove kademlia bootstrap
* updates
* remove comments
* preparing for use of `customtype` gogo extension with `NodeID` type
* review changes
* preparing for use of `customtype` gogo extension with `NodeID` type
* review changes
* wip
* tests passing
* wip fixing tests
* more wip test fixing
* remove NodeIDList from proto files
* linter fixes
* linter fixes
* linter/review fixes
* more freaking linter fixes
* omg just kill me - linterrrrrrrr
* travis linter, i will muder you and your family in your sleep
* goimports everything - burn in hell travis
* goimports update
* go mod tidy
* Travis uses Go 1.11
* Use go modules instead of storj-vendor
* Automatic caching of downloaded dependencies
* Ensures that modules incompatible linters run with modules
* begin adding encryption for remote pieces
* begin adding decryption
* add encryption key as arg to Put and Get
* move encryption/decryption to object store
* Add encryption key to object store constructor
* Add the erasure scheme to object store constructor
* Ensure decrypter is initialized with the stripe size used by encrypter
* Revert "Ensure decrypter is initialized with the stripe size used by encrypter"
This reverts commit 07272333f461606edfb43ad106cc152f37a3bd46.
* Revert "Add the erasure scheme to object store constructor"
This reverts commit ea5e793b536159d993b96e3db69a37c1656a193c.
* move encryption to stream store
* move decryption stuff to stream store
* revert changes in object store
* add encryptedBlockSize and close rangers on error during Get
* calculate padding sizes correctly
* encryptedBlockSize -> encryptionBlockSize
* pass encryption key and block size into stream store
* remove encryption key and block size from object store constructor
* move encrypter/decrypter initialization
* remove unnecessary cast
* Fix padding issue
* Fix linter
* add todos
* use random encryption key for data encryption. Store an encrypted copy of this key in segment metadata
* use different encryption key for each segment
* encrypt data in one step if it is small enough
* refactor and move encryption stuff
* fix errors related to nil slices passed to copy
* fix encrypter vs. decrypter bug
* put encryption stuff in eestream
* get captplanet test to pass
* fix linting errors
* add types for encryption keys/nonces and clean up
* fix tests
* more review changes
* add Cipher type for encryption stuff
* fix rs_test
* Simplify type casting of key and nonce
* Init starting nonce to the segment index
* don't copy derived key
* remove default encryption key; force user to explicitly set it
* move getSegmentPath to streams package
* dont require user to specify encryption key for captplanet
* rename GenericKey and GenericNonce to Key and Nonce
* review changes
* fix linting error
* Download uses the encryption type from metadata
* Store enc block size in metadata and use it for download
* Normalize the dockerfiles and entrypoints
* fix formattting and docker-compose file
* add missing env var to satellite dockerfile
* Remove build args no longer in use
* More changes to make it all work
* Finally fix the binary builds for a couple os/arch combinations
* Make the file executable before adding it to the zip
* This cache hack wasn't suppose to make it into the PR
* Guard against calling the binary target by itself
* Order matters on OS X
* Vendored my image
* No 386 builds until storage is fixed.
* First pass at an all-in-one compose project
* Sort out dependencies so uplink can build in docker
* Added the final bits to make this work
* Add readme for all-in-one
* Fix sed to work on OS X and Linux
* Make the readme for all-in-one better
* Only bring up the satellite and uplink after fixing the mock overlay
* Use a dummy value for mock overlay for now
* Finishing touches
* Fix url form for aws cli tool
* Move files out of all-in-one directory to help with directory confusion.
* Added a make target to make all-in-one even better
* adds foundation for bucketStore
* adds prefixedObjStore to buckets package, adjusts gateway-storj accordingly
* fixes multi value assignment problems in gateway-storj
* fixes more multi value assignment errors in gateway-storj
* starts changing miniogw tests to accommodate buckets
* creates bucket store mock
* wip - fixing test cases in object tests
* adds get, put, and list object tests, comments out two test cases
* adds happy scenario tests for bucket methods
* fixes bug in list, removes redundant parts from gateway tests
* fixes nit
* Clean up tests from #188
* Fix bug with timestamp conversion in segment store
* fixes segments.Meta test
* Fix regression in listing objects in a bucket
* adds check to see if bucket is empty before deleting
* updates DeleteBucket test to account for empty/full bucket
* adds TODOs for DeleteBucket and MakeBucket for some cases, adjusts tests, filters out minio errors in logging.go
* adds checks for if buckets already exist or not in DeleteBucket and MakeBucket functions; adjusts tests
* adds BucketNotFound error check in bucket store, removes todo
* adds make_bucket to Travis test, updates boltdb client constructor to always create a bucket (table)
* test captplanet in travis
* add comparison between uploaded and downloaded file
* test inline and remote files
* move captplanet testing to bash script
* port changes
* build overlay on successful merge to master
* fixes to Makefile
* permissions
* dep ensure
* gopath
* let's try vgo
* remove dep
* maybe alpine is the issue
* tagging go version on build
* stupid vgo
* vgo
* adding tags to push
* quotes
* local linting fixes & stupid travis
