* Added the ability to pass timeout settings from cmd/uplink to libuplink.
* Removed commented out code.
* Updated 2min timeouts for the uplink CLI.
* Removed comment.
* Made transport defaultDialTimeout and defaultRequestTimeout public
* Added comments to describe where these defaults apply.
* Added a new defaults to libuplink and added tests.
* Added a new defaults to libuplink and added tests.
* added satalite partner value attribution report. WIP
* WIP
* basic attribution report test completed. still a WIP
* cleanup
* fixed projectID conversion
* report display cleanup
* cleanup .added more test data
* added partnerID to query results
* fixed lint issues
* fix import order
* suggestions from PR review
* updated doc to reflect implementation
* clarification comments in the report SQL
* Changed based on PR suggestion
* More changes based on PR suggestions
* Changes based on PR suggestions
* reordered tests to make consistant with previous 2
* small comments cleanup
* More PR suggestions
* fixed lint issue and removed printf
* fixed var name
* Updates based on PR suggestions
* fixed message
* fixed test
* changes required after merge from master
* set to only listen on 127.0.0.1, move static files to same location, better template handling
* handle error
* fix path in storj-sim
* revert template handling changes
* code shouldn't panic on invalid tempalte
* do not rewrite once writing has started
* write correct error code
* use filepath for path handling
* revert change
* fix
* fix mod tidy
* use correct error code for not found, avoid infinite loop on failure
* Set up new port 8090 for in offers
Clean up commented code
Rename offers to offersweb
Remove unused code
Add todos for adding front-end templates
Add middleware for only allow local access
Add comment
Fix linting error
Remove commented code
Update storj-sim
Check request IP against Host IP
Use net pakcage to retrieve IP address
Rename service to marketing
* Add wrapper for all errors
* fix conflicts
* update the config file
* fix linting error
* remove unused packages
* remove global runtime var and add flag to storj-sim for mar static dir
* remove debugging lines
* add new config for test data and check if static dir flag is set before passing to mux
* change 'console' to 'marketing' for test data config
* fix linting errors
* update config flag
* Trigger Jenkins
* Trigger CLA
* uplink: Mark encryption key config field for setup
Set the "setup" property to the `EncryptionConfig.EncrptionKey` for
avoiding to save it in the configuration file.
This field is only meant for using in the command line parameters which
need to use a different encryption key than the one present in the key
file or use it when there is not set any encryption key file path.
* cmd/uplink: Setup non-interactive accept enc key
Change the uplink CLI setup command non-interactive to save the
encryption key into a file when it's passed through the flag
--enc.encryption-key
Previous to this change it wasn't possible to create an key file despite
of that the flag was provided, so it was useless on the setup command.
* cmd/uplink: Reuse logic to read pwd from terminal
Reuse the logic which is already implemented in the pkg/cfgstruct for
reading a password from the terminal on interactive mode, rather than
duplicating it in the setup command.
* cmd/gateway: Use encryption key file flags
The cmd/gateway was still using the `enc.key` configuration field which
doesn't exist anymore and its setup command wasn't using the
`enc.key-filepath` with combination of the `enc.encryption-key` for
generating a file with the encryption key.
This commit update the cmd/gateway appropriately and move to the uplink
package the function used by cmd/uplink to save the encryption key for
allowing to also be used by the cmd/gateway without duplicating the
logic.
* cmd/storj-sim: Adapt gateway config cmd changes
Adapt the cmd/storj-sim to correctly pass the parameters to the
cmd/gateway setup and run command.
* scripts: Don't pass the --enc.encryption-key flag
uplink configuration has changed to only support the
`--enc.encryption-key` flag for setup commands and consequently the
cmd/uplink and cmd/gateway don't accept this flag over other commands,
hence the test for the uplink had to be updated for no passing the
flag on the multiples calls that the test do to cmd/uplink.
* uplink: Remove func which aren't useful anymore
Remove the function which allows to user or load an encryption key
because it isn't needed anymore since the `--enc.encryption-key` flag is
only available for the setup command.
Consequently remove its usage from cmd/uplink and cmd/gateway, because
such flag will always be empty because in case that's passed Cobra will
return an error due to a "unknown flag".
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
* added scopelint and correcte issues found
* corrected scopelint issue
* made updates based on Ivan's suggestions
Most were around naming conventions
Some were false positives, but I kept them since the test.Run could eventually be changed to run in parallel, which could cause a bug
Others were false positives. Added // nolint: scopelint
* first round cleanup based on go-critic
* more issues resolved for ifelsechain and unlambda checks
* updated from master and gocritic found a new ifElseChain issue
* disable appendAssign. i reports false positives
* re-enabled go-critic appendAssign and disabled lint check at code line level
* fixed go-critic lint error
* fixed // nolint add gocritic specifically
* add aws s3 benchmark script
* add s3 benchmark tests
* rearrange so smaller diff, fix spelling
* add configurable uplink config for s3-benchmark
* make new bucket w/unique name for each s3 test
* changes per CR
* update uplink cmd args
* add uplod/download benchmark, add script to run benchmarks
* fix lint err
* changes per CR comments
* export env var for linux
* fix lint
* add byte count to bench test
Uplink CLI was returning an error when the `--config-dir` flag was
used with interactive `setup` command because the directory used for
storing the encryption key file was the default configuration directory
rather than the value set in the flag.
This changes make the setup process to use the same directory, than the
one informed by the `--config-dir` flag value, for storing encryption
key file.
On the other hand, the default value for the encryption key file path
which was set with the purpose of showing it in the help message has
been removed because the cfgstruct doesn't show it unless that the flag
is set to the Cobra root CMD, so it was useless.
Also show the absolute path where the encryption key file has been saved when
the interactive setup command ends satisfactorily as it's equally done
with the configuration file.
What: allow packetfilter to work on packet destinations instead of only on metric destinations. this will allow us to filter what applications get sent to rothko.
Why: currently rothko is drowning in storj-sim data and it'd be nice to filter out.
* uplink: Add a new flag to set the filepath of the file which is used for
saving the encryption key and rename the one that hold the encryption key and
establish that it has priority over the key stored in the file to make the
configuration usable without having a huge refactoring in test-sim.
* cmd/uplink: Adapt the setup subcommand for storing the user input key to a file
and adapt the rest of the subcommands for reading the key from the key-file when
the key isn't explicitly set with a command line flag.
* cmd/gateway: Adapt it to read the encryption key from the key-file or use the
one passed by a command line flag.
* pkg/process: Export the default configuration filename so other packages which
use the same value can reference to it rather than having it hardcoded.
* Adapt several integrations (scripts, etc.) to consider the changes applied in uplink and cmd packages.
* cmd/uplink: add share command to restrict an api key
This commit is an early bit of work to just implement restricting
macaroon api keys from the command line. It does not convert
api keys to be macaroons in general.
It also does not apply the path restriction caveats appropriately
yet because it does not encrypt them.
* cmd/uplink: fix path encryption for shares
It should now properly encrypt the path prefixes when adding
caveats to a macaroon.
* fix up linting problems
* print summary of caveat and require iso8601
* make clone part more clear
* add flags to sotrj-sim for SA dbs
* add schema to postgres
* add createschema with parse to sa
* add metainfo db postgres support
* add kv default as bolt
* add debug log to see db source
* add env var for postgres to test-sim.sh
* fix lint errs
* dynamically add postgres to args
* add postgres to integration tests
* add sqlite and postgres integration jenkins
* fix db name
* merge integration tests into one step
* test integration tests w/psql
* try using different schema
* debug failure
* use correct host for running storj-sim
* rm sqlite integration
* add back integration
* tie defaults to releases
this change makes it so that by default, the flag defaults are
chosen based on whether the build was built as a release build or
an ordinary build. release builds by default get release defaults,
whereas ordinary builds by default get dev defaults.
any binary can have its defaults changed by specifying
--defaults=dev
or
--defaults=release
Change-Id: I6d216aa345d211c69ad913159d492fac77b12c64
* make release defaults more clear
this change extends cfgstruct structs to support either
a 'default' tag, or a pair of 'devDefault' and 'releaseDefault'
tags, but not both, for added clarity
Change-Id: Ia098be1fa84b932fdfe90a4a4d027ffb95e249c6
* clarify cfgstruct.DefaultsFlag
Change-Id: I55f2ff9080ebbc0ce83abf956e085242a92f883e
* hardcode debug ports for storj-sim
* add function to create port
* add 200 limit to sn
* remove iota and mv instance count
* remove singleIndex var
* remove err checking from port fx
* mv unneeded conversion
What: This change moves project-level bucket metadata encryption information to the volatile section, because it is unlikely to remain in future releases
Why: Ultimately, the web user interface will allow bucket management (creation, removal, etc), but not object management as that requires an encryption key for sure and we don't want to have users give the satellite their encryption keys.
At a high level, a (*Project) type should map to all of the things you can do inside the web user interface within a project, which by necessity cannot have an encryption key. So, we really don't want an encryption key in the non-volatile section of this library.
* releases: update alpha dockerfiles to embed release tags
Change-Id: I2978d3ed77d1b768be24ec9194bc404cd92e4700
* release script use plain shell
Change-Id: Ie4ca6633014e3bf00ac0c82e28905174a6ade95b
* removed /scripts from .dockerignore
Change-Id: Ib555236d62fb3dc354689284ac4a032d5b4b3aa8
* switch back to bash
Change-Id: Ie0958cde71cd396f44ac28c177f48df0bea7ba22
* fix go1.12 modules
Change-Id: If4c8364e7271f09febd1a6c8bfc731d723d344d9
* make sure the work tree is clean
Change-Id: Ie6e52af28e2bc52880d92a3b574d1f859fc8e88e
