Query nodes table using AS OF SYSTEM TIME '-10s' (by default) when on CRDB to alleviate contention on the nodes table and minimize CRDB retries. Queries for standard uploads are already cached, and node lookups for graceful exit uploads has retry logic so it isn't necessary for the nodes returned to be current.
With the new overlay.AuditOutcome type for offline audits, the
IsUp field is redundant. If AuditOutcome != AuditOffline, then
the node is online.
In addition to removing the field itself, other changes needed
to be made regarding the relationship between 'uptime' and 'audits'.
Previously, uptime and audit outcome were completely separated. For
example, it was possible to update a node's stats to give it a
successful/failed/unknown audit while simultaneously indicating that
the node was offline by setting IsUp to false. This is no longer possible
under this changeset. Some test which did this have been changed slightly
in order to pass.
Also add new benchmarks for UpdateStats and BatchUpdateStats with different
audit outcomes.
Change-Id: I998892d615850b1f138dc62f9b050f720ea0926b
- Remove flag for switching off offline audit reporting.
- Change the overlay method used from UpdateUptime to BatchUpdateStats, as this
is where the new online scoring is done.
- Add a new overlay.AuditOutcome type: AuditOffline. Since we now use the same
method to record offline audits as success, failure, and unknown, we need to
distinguish offline audits from the rest.
Change-Id: Iadcfe10cf13466fa1a1c2dc542db8994a6423355
Previously if a node did not have audit history data for each of the
windows over the tracking period, we would give them the benefit of
the doubt and set their score to 1. This was to prevent nodes from
being suspended right out the gate. We need a minimum amount of data
to evaluate them.
However, a node who is actually failing at being online will have no
idea until they have received enough audits and we suspend them.
Instead, we will always use their real score, but use a flag to determine
whether they are eligible for suspension/dq.
Change-Id: I382218f12e8770f95d4bcddcf101ef348940cadf
Additionally, this PR changes NewNodeFraction devDefault and testplanet config from 0.05 to 1.
This is because many tests relied on selecting nodes that were reputable based on audit and uptime
counts of 0, in effect, selecting new nodes as reputable ones.
However, since reputation is now indicated by a vetted_at db field that is explicitly set
rather than implied by audit and uptime counts, it would be more complicated to try to
update all of the nodes' reputations before selecting nodes for tests.
Now we just allow all test nodes to be new if needed.
Change-Id: Ib9531be77408662315b948fd029cee925ed2ca1d
Add online score used for the new audit history offline tracking system
to the nodes table. This allows us easy access to the node's online
score for the storagenode dashboard as well as for data analysis.
Change-Id: Ie99be1192e5236862a5b3dbed2e5ef03b9169410
When a node's audit history "online score" passes below a configured
threshold, the node goes into "offline suspension" mode and begins a
review period, where the operator is given an opportunity to bring their
node back online.
After the review period passes, offline suspension is turned off for the
node.
In the future, if a node still has a bad online score at the end of the
review period, it will be disqualified. This is disabled right now.
In the future, if a node is in offline suspension, it will be treated as
"unhealthy". Right now, there are no consequences for being in offline
suspension.
Minor changes:
* Moves AuditHistoryConfig out of UpdateStats/BatchUpdateStats args and
into UpdateRequest.
* Adds "now" argument to UpdateStats/BatchUpdateStats args for easy
testing.
* Changes formatting strings inside buildUpdateStatement to use specific
types.
Change-Id: I032b60298840fc16e6ef831da750f2d57619a397
Add a function to the overlay cache called UpdateAuditHistory, which
allows us to add online or offline audits to a particular node's audit
history, and get that node's "online score" for the configured tracking
period.
The next step will be to use UpdateAuditHistory from inside
BatchUpdateStats/UpdateStats, so that audit history is actually updated
when nodes get audited, and we can suspend nodes based on their online
score.
Change-Id: I2289105e6961e68e829a987ff756b0e576fab120
This change removes the overlay function FindStorageNodesForRepair,
which skips using the node selection cache and hits the database
directly. Otherwise, it is functionally identical to
FindStorageNodesForUpload, which checks the node selection cache first.
When selecting nodes for PUT_REPAIRs, we now call
FindStorageNodesForUpload instead of FindStorageNodesForRepair to reduce
database load.
Change-Id: If34e109695b2ed2b8fb6759115bf769a3459684e
What: As soon as a node passes the vetting criteria (total_audit_count and total_uptime_count
are greater than the configured thresholds), we set vetted_at to the current timestamp.
Why: We may want to use this timestamp in future development to select new vs vetted nodes.
It also allows flexibility in node vetting experiments and allows for better metrics around
vetting times.
Please describe the tests: satellitedb_test: TestUpdateStats and TestBatchUpdateStats make sure vetted_at is set appropriately
Please describe the performance impact: This change does add extra logic to BatchUpdateStats and UpdateStats and
commits another variable to the db (vetted_at), but this should be negligible.
Change-Id: I3de804549b5f1bc359da4935bc859758ceac261d
GetNodes returned references to nodes in the immutable state, however
some parts of code expect them to be modified.
Change-Id: I5be1866f95e0dbe062a6b6be60e29f2365c35faa
Also distinguish the purpose for selecting nodes to avoid potential
confusion, what should allow caching and what shouldn't.
Change-Id: Iee2451c1f10d0f1c81feb1641507400d89918d61
Add a flag that allows us to easily switch disqualification from
suspension mode on or off. A node will only be disqualified from
suspension mode if it has been suspended for longer than the grace
period AND the SuspensionDQEnabled flag is true.
Change-Id: I9e67caa727183cd52ab2042b0a370a1bcaebe792
The UpdateAddress method use to be used when storage node's checked in with the Satellite, but once the contact service was created this method was no longer used. This PR finally removes it.
Change-Id: Ib3f83c8003269671d97d54f21ee69665fa663f24
If a node is suspended and receives an unknown or failing audit,
disqualify them if the grace period (default 1w in production) has
passed.
Migrate the nodes table so any node that is currently suspended gets
unsuspended when the satellite starts up.
Change-Id: I7b81c68026f823417faa0bf5e5cb5e67c7156b82
Make sure that suspended nodes are treated appropriately by the overlay
cache. This means we should expect the following behavior:
* suspended nodes (vetted or not) should not be selected for uploading
new segments
* suspended nodes should be treated by the checker and repairer as
"unhealthy", and should be removed upon successful repair
This commit also removes unused overlay functionality.
Fixes a bug with commit 8b72181a1f where
the audit reporter was automatically suspending nodes regardless of
audit outcome (see test added).
Tests:
* updates repair tests to ensure that a suspended node is treated as
unhealthy and will be removed from the pointer on successful repair
* updates overlay tests for KnownUnreliableOrOffline and KnownReliable
to expect suspended nodes to be considered "unreliable"
* adds satellitedb test that ensures overlay.SelectStorageNodes and
overlay.SelectNewStorageNodes do not include suspended nodes
* adds audit reporter test to ensure that different audit outcomes
result in the correct suspended/disqualified states
Change-Id: I40dba67278c8e8d2ce0bcec5e0a5cb6e4ce2f561
* change overlay.UpdateStats to allow a third audit outcome. Now it can
handle successful, failed, and unknown audits.
* when "unknown audit reputation"
(unknownAuditAlpha/(unknownAuditAlpha+unknownAuditBeta)) falls below the
DQ threshold, put node into suspension.
* when unknown audit reputation goes above the DQ threshold, remove node
from suspension.
* record unknown audits from audit reporter.
* add basic tests around unknown audits and suspension.
Change-Id: I125f06f3af52e8a29ba48dc19361821a9ff1daa1
My understanding is that the nodes table has the following fields:
- `address` field which can be a hostname or an IP
- `last_net` field that is the /24 subnet of the IP resolved from the address
This PR does the following:
1) add back the `last_ip` field to the nodes table
2) for uplink operations remove the calls that the satellite makes to `lookupNodeAddress` (which makes the DNS calls to resolve the IP from the hostname) and instead use the data stored in the nodes table `last_ip` field. This means that the IP that the satellite sends to the uplink for the storage nodes could be approx 1 hr stale. In the short term this is fine, next we will be adding changes so that the storage node pushes any IP changes to the satellite in real time.
3) use the address field for repair and audit since we want them to still make DNS calls to confirm the IP is up to date
4) try to reduce confusion about hostname, ip, subnet, and address in the code base
Change-Id: I96ce0d8bb78303f82483d0701bc79544b74057ac
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
Adds ExcludedIPs to the NodeCriteria for selecting new storage
nodes. Previously, ExcludedIPs was only added to the NodeCriteria
for selecting reputable storage nodes. Now that both are included
in the FindStorageNodesWithPreferences call, it should no longer
be possible to repair pieces to nodes that are on the same IP as
nodes already storing pieces from that segment.
Adds TestSelectNewStorageNodesExcludedIPs to make sure that
SelectNewStorageNodes returns nodes with different IP addresses.
https://storjlabs.atlassian.net/browse/V3-3011
Change-Id: Ic2d5e607cadeba6e8d5c40f9717149cb30880335
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb
Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
Disqualifies a node when the node fails to complete a graceful
exit.
Adds a new DisqualifyNode method to the overlay cache, since there
wasn't an existing method to disqualify a node but do nothing else
to its stats.
Adds checks to existing tests to make sure that a storage node that
fails a graceful exit is marked as disqualified in the overlay
cache.
https: //storjlabs.atlassian.net/browse/V3-3342
Change-Id: I4d554a519ab59db31ad3b8e28764c8683a6e3888
overlay.GetOfflineNodesLimited
We only care about node ID, address, and last contact success/failure
from the downtime service, so the overlay should only return these
values for the downtime-specific queries.
Change-Id: I08a6ecfdd2a12b82cae62e87d6adeab53975bfce
Adds the KnownReliable method to Overlay Service that filters all nodes
from the given list to be only reliable nodes (online and qualified).
The method return []*pb.Node of reliable nodes. The pb.Node values are
ready for dialing.
The first use case is when deleting an object to efficiently dial all
reliable nodes holding a piece of that object and send them a delete
request.
Change-Id: I13e0a8666f3807c5c31ef1a1087476018a5d3acb
* satellite/nodeselection: dont select nodes that havent checked in for a while
* change testplanet online window to one minute
* remove satellite reconfigure online window = 0 in repair tests
* pass timestamp into UpdateCheckIn
* change timestamp to timestamptz
* edit tests to set last_contact_success to 4 hours ago
* fix syntax error
* remove check for last_contact_success > last_contact_failure in IsOnline
* add overall failure percentage check and inactive time frame check before sending a response to sno
* update comment
* delete node from transfer queue if it has been inactive for too long
* fix linting error
* add test config value
* fix nil pointer
* add config value into testplanet
* add unit test for overall failure threshold
* move timeframe threshold to chore
* update protolock
* add chore test
* add per peiece failure count logic
* change config name from EndpointMaxFailures to MaxFailuresPerPiece
* address comments
* fix linting error
* add error handling for no row returned from progress table
* fix test for graceful exit chore on storagenode
* fix typo InActive -> Inactive
* improve readability for failure threshold calculation
* update config lock
* change error handling for GetProgress in graceful exit endpoint on the satellite side
* return proper rpc error in endpoint
* add check in chore test for checking finish timestamp and queue
* update lock file and add comment
* add created at and bytes transferred
* cleanup
* rename db func to GetGracefulExitNodesByTimeFrame
* fix flag
* split into two overlay functions
* := to =
* fix test
* add node not found error class
* fix overlay test
* suggested test changes
* review suggestions
* get exit status from overlay.Get()
* check rows.Err
* fix panic when ExitFinishedAt is nil
* fix comments in cmdGracefulExit
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
