* put TestCreateV0 back in StoreForTest
* avoid direct handles to V0 pieceinfo db
* type mismatch fix
* use storage.Blobs interface in store_test.go
..instead of filestore.Store. this will allow filestore.Store to become
unexported.
* unexport filestore.Store
rename it to blobStore. things should use the storage.Blobs interface
instead. changes in this commit are purely mechanical (made through the
"refactor" tool in Gocode followed by search/replace on the word "Store"
within the storage/filestore/ directory).
* kill filestore.StoreForTest
now that filestore.blobStore is unexported, there isn't a need for a
specialized wrapper type. this (not coincidentally) also makes it
possible for the WriterForFormatVersion() method on
storagenode/pieces.StoreForTest to work, without requiring everything to
wrap the store.blobs attribute in a filestore.StoreForTest, which was
impractical.
* change satellite.Peer name to Core
* change to Core in testplanet
* missed a few places
* keep shared stuff in peer.go to stay consistent with storj/docs
* improve errors in satellite contact endpoints
* add changes per CR comments
* update pingback method so it still updates node table
* fix err and returns
* fix zap logging to be better
When the contact chore starts running before the monitor service has
provided any useful capacity data, the first outgoing contact has
not-very-helpful data for the satellite. This change causes the contact
chore to wait until capacity data is available. The wait should be quite
short in all reasonable cases: even when a node starts with a lot of
stored pieces and no cached spaceUsedDB data, new data will have been
calculated and cached by the call to
`peer.Storage2.CacheService.Init(ctx)` in `storagenode.cmdRun()` before
`peer.Run(ctx)`.
Change-Id: Ibc26d5c1fc10a23006c00bc3f13ff6cf71f8bf1d
* Make the exiting node check piece hashes, piece IDs, and piece hash signatures before relaying successful transfer data to the satellite.
* Enable immediate graceful exit failure for "successful" transfers that fail satellite-side validation.
* Move transfer piece logic in storagenode worker to separate function (to make the worker easier to understand)
* add overall failure percentage check and inactive time frame check before sending a response to sno
* update comment
* delete node from transfer queue if it has been inactive for too long
* fix linting error
* add test config value
* fix nil pointer
* add config value into testplanet
* add unit test for overall failure threshold
* move timeframe threshold to chore
* update protolock
* add chore test
* add per peiece failure count logic
* change config name from EndpointMaxFailures to MaxFailuresPerPiece
* address comments
* fix linting error
* add error handling for no row returned from progress table
* fix test for graceful exit chore on storagenode
* fix typo InActive -> Inactive
* improve readability for failure threshold calculation
* update config lock
* change error handling for GetProgress in graceful exit endpoint on the satellite side
* return proper rpc error in endpoint
* add check in chore test for checking finish timestamp and queue
libuplink was incorrectly setting timeouts to 10 seconds still, but
should have been at least 10 minutes. the order sender was setting them
to 1 hour. we don't want timeouts in uplink-side logic as it establishes
a minimum rate on tcp streams.
instead of all of this, just use tcp keep alive. tcp keep alive packets are
sent every 15 seconds and if the peer stops responding the connection
dies. this is enabled by default with go. this will kill tcp connections
when they stop working.
Change-Id: I3d7ad49f71950b3eb43044eedf4b17993116045b
The upload code currently updates the usage in a deferred call to saveOrder().
The consequence is that in the success case, the RPC is completed before
the usage has been updated.
This change repurposes the deferred call to update usage in the
failure case, while explicitly updating the usage before completing the
RPC.
This fixes some test flakiness when using dRPC. gRPC waits until the final status is written before a Recv call completes, and the final status is written by the server after the handler function has exited. In practice this means that the client is blocked until the defer call is also finished. So this change will not change performance at all.
It has two advantages:
(1) It fixes test flakiness
and, more importantly:
(2) reduces the chances that someone will accidentally write a flaky test in the future
* add exit-status command
* remove todo and fix format
* fix status display
* change startExit to exit progress
* fix linting error
* add successful column in exit progress
* fix test
* remove extra new line
* fix TYPOS
* format the percentage better
This change adds a trusted registry (via the source code) of node address to node id mappings (currently only for well known Satellites) to defeat MITM attacks to Satellites. It also extends the uplink UI such that when entering a satellite address by hand, a node id prefix can also be added to defeat MITM attacks with unknown satellites.
When running uplink setup, satellite addresses can now be of the form 12EayRS2V1k@us-central-1.tardigrade.io (not even using a full node id) to ensure that the peer contacted is the peer that was expected. When using a known satellite address, the known node ids are used if no override is provided.
the net package does not make it easy to know if DialContext
failed because the context was done. it's important for some
of our tests that canceled contexts are detected as such, so
we accept the small race that's arguably correct (the context
must be canceled asynchronously) to ensure we always return
the context error if available.
Change-Id: I058064d5c666e5353b74fb5bd300bf7abe537ff5
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
* storagenode/storagenodedb: Migrate to separate dbs
* storagenode/storagenodedb: Add migration to drop versions tables
* Put drop table statements into a transaction.
* Fix CI errors.
* Fix CI errors.
* Changes requested from PR feedback.
* storagenode/storagenodedb: fix tx commit
* test that all nodes can check in with all satellites
* keep kademlia config
* add untrusted satellite test
* use getversion
* remove kademlia config changes in test-sim-backwards.sh
* add kademlia flags back to storj-sim storagenode
* reset kademlia flags in storagenode entrypoint
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
* Split the info.db database into multiple DBs using Backup API.
* Remove location. Prev refactor assumed we would need this but don't.
* Added VACUUM to reclaim space after splitting storage node databases.
* Added unique names to SQLite3 connection hooks to fix testplanet.
* Moving DB closing to the migration step.
* Removing the closing of the versions DB. It's already getting closed.
* Swapping the database connection references on reconnect.
* Moved sqlite closing logic away from the boltdb closing logic.
* Moved sqlite closing logic away from the boltdb closing logic.
* Remove certificate and vouchers from DB split migration.
* Removed vouchers and bumped up the migration version.
* Use same constructor in tests for storage node databases.
* Use same constructor in tests for storage node databases.
* Adding method to access underlining SQL database connections and cleanup
* Adding logging for migration diagnostics.
* Moved migration closing database logic to minimize disk usage.
* Cleaning up error handling.
* Fix missing copyright.
* Fix linting error.
* Add test for migration 21 (#3012)
* Refactoring migration code into a nicer to use object.
* Refactoring migration code into a nicer to use object.
* Fixing broken migration test.
* Removed unnecessary code that is no longer needed now that we close DBs.
* Removed unnecessary code that is no longer needed now that we close DBs.
* Fixed bug where an invalid database path was being opened.
* Fixed linting errors.
* Renamed VersionsDB to LegacyInfoDB and refactored DB lookup keys.
* Renamed VersionsDB to LegacyInfoDB and refactored DB lookup keys.
* Fix migration test. NOTE: This change does not address new tables satellites and satellite_exit_progress
* Removing v22 migration to move into it's own PR.
* Removing v22 migration to move into it's own PR.
* Refactored schema, rebind and configure functions to be re-useable.
* Renamed LegacyInfoDB to DeprecatedInfoDB.
* Cleaned up closeDatabase function.
* Renamed storageNodeSQLDB to migratableDB.
* Switched from using errs.Combine() to errs.Group in closeDatabases func.
* Removed constructors from storage node data access objects.
* Reformatted usage of const.
* Fixed broken test snapshots.
* Fixed linting error.
this is a trivial operation for storagenode/console, as it doesn't
really need or use kademlia in the first place.
What:
Removes kademlia from storagenode/console
Why:
We are in the process of getting rid of kademlia, and this is one place where it's particularly easy.
Please describe the tests:
Existing tests exercise storagenode/console behavior; if they continue to work, everything here should be tested satisfactorily.
Please describe the performance impact:
None
* implement contact.checkin method
* add batching to update uptime checks
* rm batching
* rm other unneeded things
* fix lint
* fix unit test
* changes per CR comments
* couple more CR changes
* add identity check into grpcOpt
* fix lint
* why do you fix the test
* revert test change
* stop contact chore for repair test
* put node in cache
* comment out contact chore. See what happens
* Revert "comment out contact chore. See what happens"
This reverts commit 2e45008e36a50e0a842ae455ac83de77093d4daa.
* try stopping contact earlier
* stop contact chore in uplink_test
* replace self on chore with *RoutingTable for access to latest node info
* Revert "stop contact chore in uplink_test"
This reverts commit 302db70f4071112d1b9f7ee0279225ea12757723.
* Revert "try stopping contact earlier"
This reverts commit 806cc3b82f9d598899dafd83da9315a1cb0cb43c.
* Revert "stop contact chore for repair test"
This reverts commit dd34de1cfdfc09b972186c9ab9a4f1e822446b79.
Don't return error when archiving errors which aren't found in the DB
because it causes Storage Node send orders cycle to stop.
This was applied in the commit e47b8ed131
but the last call to orders.Archive function was missed so the errors
weren't returned when not found orders in the first call but they were
returned in the second call.
This commit address the second call for making handleBatches function
never returns error on not found orders.
* nicer flags
* fix concurrency
* add concurrent workers
* initialize things
* fix tests
* close retain service
* ensure we don't have workers working on the same satellite
* ensure things compile
* fix other compilation issues:
* concurrency changes
ran this with `go test -count=1000` and it passed all of them.
- we add a closed channel so that we can select on it with
context cancellation.
- we put a once in so we only close the channel once.
- every time the queue/running state changes, we have to broadcast
because we may want to wake up N pending Wait calls or other
concurrent workers.
- because we broadcast, we don't need to do the polling in Wait
anymore.
- ensure Run doesn't start multiple times so that we don't have
to worry about concurrent Close with multiple Runs.
- hold the lock while we start workers so that a concurrent Close
with Run can't decide that there's nothing started and exit
and then have Run start things.
- make sure to poll the closed/context channels through loops
or at the start of Run calls in case Close happens first.
- these polls should be under a mutex because they have a default
case which makes it possible to schedule such that Close hasn't
executed the channel close so it starts more work.
- cancel a local Run context when it's going to exit to make sure
that any retainPieces calls have a canceled context.
- hopefully enough comments to both check my work and help readers
digest what's going on.
Change-Id: Ida0e226a7e01e8ae64fa2c59dd5a84b04bccfbd7
* use the retain error class
Change-Id: I1511eaef135f98afd57b878e997e4c8a0d11cafc
* concurrency fixes again
- forgot to update the gc test to use the old Wait api.
- we need to drop the lock while we wait for the workers
to exit, because they may be blocked on the condition
variable
- additionally, we need to broadcast when we close the
signal channel because the state changed: they want
to wake up and exit.
Change-Id: I4204699792275260cd912f29aa73720f7d9b14b5
* undo my misguided rename
Change-Id: I6baffe1eb0434e260212c485bbcc01bed3250881
* remove pollInterval
* format paragraph more nicely
* move skew calculation into retain pieces
This PR introduces functionality for routine deletion of archived orders.
The user may specify an interval at which to run archive cleanup and a TTL for archived items. During each cleanup, all items that have reached the TTL are deleted
This archive cleanup job is combined with the order sender into a new combined orders service
* storagenode/nodestats: fix issue on 32 bit platforms
time.Duration is an int64, so casting it down to an int
can cause it to become negative, causing a panic.
Change-Id: I33da7c29ddd59be60d8deec944a25f4a025902c7
* storagenode/nodestats: fix lint issue in test
Change-Id: Ie68598d724d2cae0dc959d4877098a08f4eb9af7
* Rebasing changes against master.
* Added back withTx().
* Fix using new error type.
* Moving back database initialization back into the struct.
* Fix failing migration tests.
* Fix linting errors.
* Renamed database object names to be consistent.
* Fixing linting error in imports.
* Rebasing changes against master.
* Added back withTx().
* Fix using new error type.
* Moving back database initialization back into the struct.
* Fix failing migration tests.
* Fix linting errors.
* Renamed database object names to be consistent.
* Fixing linting error in imports.
* Adding missing change from merge.
* Fix error name.
Add retain service on storagenode. This service runs retain jobs that have been queued by the storagenodes. Rather than running retain jobs during the grpc Retain() call, the grpc call queues a retain job to the retain service and returns immediately afterwards, removing a significant bottleneck in garbage collection.
When an unsent order stored in the DB cannot be unmarshalled due to an
unmarshal error the rest unsent orders must be processed as usual.
This changes will avoid that a Storage Node with unsent orders with
invalid protobuf serialized values get blocked without sending orders
until those invalid ones get removed from the DB.
* pkg/process: Fatal show complete error information
Change the general process execution function to not using the sugared
logger for outputting the full error information.
Delete some unreachable code because Zap logger Fatal method calls exit
1 internally.
* storagenode/storagenodedb: Add info to error
Add more information to an error returned due to some data
inconsistency.
* storagenode/orders: Don't use sugared logger
Don't use sugar logger and provide better contextualized error messages
in settle method.
* storagenode/orders: Add some log fields to error msgs
Add some relevant log fields to some logged errors of the sender settle
method.
* satellite/orders: Remove always nil error from debug
Remove an error which as logged in debug level which was always nil and
makes the logic that used this variable clear.
* storagenode/orders: Don't return error Archiving unsent
Don't stop the process which archive unsent orders if some of them
aren't found the DB because it cause the Storage Node to stop with a
fatal error.
PR https://github.com/storj/storj/pull/2596 applied a refactoring which
moved tests in of the storagenodb package and it lost a test having
replacing the one lost by another one which belonged to another package.
This commit removes the duplicated test and restores the lost one.
* add cache, update cache w/piece create/delete
* add service w/loop to cache to recalculate space used cache
* add piecestore cache to other sn svcs to use
* add table to persist the total space used
* rm cache where not needed
* rm stuff from sn svcs
* start fixing tests, changes per comments
* update commits
* add unit tests
* fix commiting before we write header bytes
* fix cache create test
* copy cache map, add started back to recalc
* fix test
* add test, update comments
Deprecate the pieceinfo database, and start storing piece info as a header to
piece files. Institute a "storage format version" concept allowing us to handle
pieces stored under multiple different types of storage. Add a piece_expirations
table which will still be used to track expiration times, so we can query it, but
which should be much smaller than the pieceinfo database would be for the
same number of pieces. (Only pieces with expiration times need to be stored in piece_expirations, and we don't need to store large byte blobs like the serialized
order limit, etc.) Use specialized names for accessing any functionality related
only to dealing with V0 pieces (e.g., `store.V0PieceInfo()`). Move SpaceUsed-
type functionality under the purview of the piece store. Add some generic
interfaces for traversing all blobs or all pieces. Add lots of tests.
* storagenode/piecestore: track live requests together
Change-Id: I9ed44e4484b97bcbe076c222450c3449fe8b1075
* show grpc status codes in monkit failures
Change-Id: I68bc3a8d24a372e8147ef2a74636fc3e40fa799a
* small nit
Change-Id: I722b09345377b079e41c5a3dc86d7fd6232c9d24
* pkg/server: don't use global logger
* satellite/overlay: use correct logger
* pkg/kademlia: use correct logger
* linksharing: use conventional way to pass in logger
* use zaptest in tests
* storagenode/piecestore: Unexport endpoint method
Make an exported endpoint method to be unexported because it's only used
by the same package and makes easy to change without thinking in
breaking changes.
* uplink/ecclient: Use structured logger
Swap sugared logger by the normal structured logger for having the full
stack traces of the error in the debug message.
* storagenode/piecestore: Send gRPC error codes upload
Refactoring in the storagenode/piecestore to send gRPC status error codes
when some of the methods involved by upload return an error.
The uplink related to uploads has also been modified to retrieve the
gRPC status code when an error is returned by the server.
* re-organizing into bandwidth service. re-enable rollup loop
* Prevent uniqueness failure in bandwidth rollup
* Add test to make sure the rollup select date range works correctly
* add bandwidth config for rollup interval
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
* Added a gc package at satellite/gc, which contains the gc.Service, which runs garbage collection integrated with the metainfoloop, and the gc PieceTracker, which implements the metainfo loop Observer interface and stores all of the filters (about which pieces are good) for each node.
* Added a gc config located at satellite/gc/service.go (loop disabled by default in release)
* Creates bloom filters with pieces to be retained inside the metainfo loop
* Sends RetainRequests (or filters with good piece ids) to all storage nodes.
* storagenode: remove datetime calls in favor of UTC
datetime only has second level granularity whereas string
comparisons don't. Since we're wiping everything anyway, it's
easier to just use UTC everywhere rather than migrate to
datetime calls.
* add utcdb to check that arguments are utc
* storagenodedb: add trivial tests to ensure calls work
This at least tests that all of the timestamps passed in are
in the UTC timezone.
* fix truncated comment and change migrations to be UTC
If we verify that the size matches reality, we can then expect to use
the filesystem to store the piece size as used in the signed PieceHash
from the uplink. Otherwise, the uplink might send a garbage size value,
leaving the storagenode with no good way to verify the uplink signature
on the piece at a later date.
Also fix the code in uplink/piecestore/ so that it sends a valid size,
because it was being rude and sending 0.
- Drops some unused indexes
- Applies a computed index to timestamp columns
- Applies a partial index for expired pieces
- Uses BETWEEN to avoid some datetime calls
- Filters expired piece search by those that aren't NULL
* Add in-memory cache for bandwidth and space usage monitoring
* moved some structs around and added error handling for get piece size query
* added to existing bandwidth test. fixed typo
* added test, updates from PR review, added monkit for new methods
* PR review updates. renamed space used methods
* changed bw cache so that only Add updates the cache and it only overwrites when the date moves forward
* moved bandwidth usage to bw and space usage to pieceinfodb
* fixed interface comment
* removed pointer from sync.Once
* remove infodb locks and give a unique name for each in memory created.
* changed max idle and open to 1 for memory DBs. fixes table locking errors
* fixed race condition
* added file based infodb test
* added busy timeout parameter to the file based infodb for testing
* fixed imports
* removed db.locked() after merge from master
