Add new console service payments methods ApplyCoupon and
ApplyFreeTierCoupon. ApplyCoupon applies a coupon to an account based on
the coupon ID passed to it. ApplyFreeTierCoupon applies the satellite
configured free tier coupon to the account.
Change-Id: Ic221092278553a79207ac2a0c9229c374d76c881
Several tests using `(*ECRepairer).Get()` have begun to exhibit flaky
results. The tests are expecting to see failures in certain cases, but
the failures are not present. It appears that the cause of this is that,
sometimes, the fastest good nodes are able to satisfy the repairer
(providing RequiredCount pieces) before the repairer is able to identify
the problem scenario we have laid out.
In this commit, we add an argument to `(*ECRepairer).Get()` which
specifies how many failure results are expected. In normal/production
conditions, this parameter will be 0, meaning Get need not wait for
any errors and should only report those that arrived while waiting for
RequiredCount pieces (the existing behavior). But in these tests, we can
request that Get() wait for enough results to see the errors we are
expecting.
Refs: https://github.com/storj/storj/issues/5593
Change-Id: I2920edb6b5a344491786aab794d1be6372c07cf8
We are supposed to wait for some amount of time after a timed-out audit
before retrying the audit on the contained node. We are also supposed to
wait for some amount of time before subsequent retries, if they are
necessary. The test added here tries to assure that those delays happen,
as far as it is possible to assure that a delay will happen in computer
code.
The previous behavior of the system was, in fact, to carry out
Reverifies as soon as a worker could retrieve the job from the
reverification queue. That's not a very major problem, as subsequent
retries do have a delay and the node does get several retries. Still, it
was not ideal, and this test exposed that mismatch with expectations, so
this commit includes a minor change to effect that pause between verify
and the first reverify.
Refs: https://github.com/storj/storj/issues/5499
Change-Id: I83bb79c166a458ba59a2db2d17c85eca43ca90f0
While working on fixing listing for committed objects we didn't fix
the same case for pending objects. For case were we have many
pending objects under different locations we need to set cursor
version to highest value to avoid duplicates.
For case where we have many pending objects under the same location
we will need to make a separate fix.
https://github.com/storj/storj/issues/5570
Change-Id: Id5c8eb728868e8e1177fdbcf65a493142be4eaf0
Adds a feature flag for the new all projects dashboard. It defaults to false.
Issue: https://github.com/storj/storj/issues/5514
Change-Id: I160904eccae7d30e05b734e69600725702b16aca
Create an endpoint in the Admin Api to be able to update a user’s limits
for all existing and new projects. Also added a GET endpoint to return
user's limits.
Fixes: https://github.com/storj/storj/issues/5395
Change-Id: I2c093dc08ebf79a4318391e63a37da4d2b403547
We have an issue where object can appear in two different listing pages.
It's because protobuf listing cursor doesn't have version included and
now we can have internally versions higher than 1. On satellite side
version 1 was always used as a default cursor version.
As a workaround for existing implementation of libuplink library we will
use always maximum version for listing cursor on satellite side.
Fixing protobuf and libuplink implementation will happen later.
https://github.com/storj/storj/issues/5570
Change-Id: Ibd27b174556c9d8b8bd60fab8cff7862fd11e994
This change adds support for project public id to the bucket-names and
usage-report endpoints.
Issue: https://github.com/storj/storj/issues/5578
Change-Id: I2429ebebe52dfc8217fc40f4691e7bc473b805fb
Peer for generating bloom filters will be able to use ranged loop.
As an addition some cleanup were made:
* remove unused parts of GC BF peer (identity, version control)
* added missing Close method for ranged loop service
* some additional tests added
https://github.com/storj/storj/issues/5545
Change-Id: I9a3d85f5fffd2ebc7f2bf7ed024220117ab2be29
This modification introduce support of the new "desired node" field of download segment/object.
This can be used to request more nodes than the suggested minimum. It can be used to achieve better performance in exchange of using more bandwidth. (more parallel downloads).
Change-Id: Ia167d6979e6d70a597c85070a4ccd1c3a573e406
Most of our (~integration) tests based on testplanet runner.
However running testplanet for each test make the testing process slow.
It seems to be better to use real unit tests (without db dependency) when it's possible.
This patch makes small modification to make it possible to test orders.Service with real unit test.
As the existing unit test of `service.go` is isolated with `_test` package name, it's moved to an `_integration_test.go` file to make place for the unit test.
Change-Id: Ia69f26a34e2c48d230d8d36c2040dd02a60455a6
This commit introduces tests that perform multiple concurrent audits
against the same storage node, to make sure that doing so does not
create incorrect outcomes.
Refs: https://github.com/storj/storj/issues/5495
Change-Id: Iaae49e042306bfa59bdf04c1a1540667488e51e5
TestLoopContinuesAfterObserverError was failing due to system
granularity measuring the duration as 0.
TestDialer_DialTimeout was failing due to connection failure came with a
delay and wasn't being handled.
Change-Id: I4638c86f5d021a86c3d3529fab13cf3608f35c40
ListUploads returns incorrect UploadID if Expires was set in
BeginUpload. DB is truncating expiration date to microseconds precision
so we need to do this also in code.
Change-Id: Iee0cf45cb705342f6bb9a2f745acca91cce6ff52
Orders from storage nodes are received by SettlementWithWindowFinal method. There is a stream which receives all orders and after getting
all orders we are inserting into DB storagenode and bucket bandwidth. Problem is with bucket bandwidth which is stored through cache which is often using context from SettlementWithWindowFinal stream to perform DB inserts and its doing this in separate goroutine. Because of that is possible that SettlementWithWindowFinal is finished before flushing was finished and context is canceled while doing insert into DB
Change-Id: I3a72c86390e9aedc060f6b082bb059f1406231ee
The banners on the web satellite previously hovered over the page
and overlapped other content as a result. This change moves them
into the page content so it overlaps nothing and is scrollable off-screen
This change also makes the upgrade banner only show on the dashboard and
only if the user joined more than seven days ago.
Issue: https://github.com/storj/storj/issues/5525
Change-Id: I7278c31201f09d3515d907b833622b04c6de8557
This change adds a database migration for a new table that stores
configurations for a user, the first of which is the session duration.
Database methods are implemented to interact with this table.
Resolves#5472
Change-Id: I01049265f385ea5de65907da1bc3bcf426d3c577
this change uses the new storj/common noise helpers, which:
* add a security fix (require an expected node id for validating
noise key attestations)
* stops doing an unnecessary order signature validation (it's
already been done inside of PutPiece)
* removes some duplicate code
Change-Id: I5e67a08ff216cd9c5b0b82e40b4d9de664b6b0fc
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds the actual chore.
Refs: https://github.com/storj/storj/issues/5431
Change-Id: Id78b40bf69fae1ac39010e3b553315db8a1472bd
Previously we were exposing the testing facilities via interface casting
the necessary parts, however, when things are not part of the main
satellite.DB interface they need to be manually propagated. Rather than
relying on using hidden methods lets expose things as long as they don't
create a direct dependency to the database driver.
Change-Id: I2eb7d8b60f4b64de1320c2d32581f7be267c0f57
This updates project related graphql mutations and queries to support
project publicId while maintaining support for project ID. The frontend
is updated to use only publicId when using these mutations/queries.
Issues:
https://github.com/storj/storj/issues/5409https://github.com/storj/storj/issues/5413
Change-Id: Ib6241db157de3b37c86a4a98c9f682bf4a047b62
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds a method to the overlay allowing the caller to set the
contained status of all nodes in the nodes table at once. This is valid
because our definition of "contained" now depends solely on whether a
node appears at least once in the reverification queue. Only rows whose
contained field does not match the expectation will be updated; the
contained timestamp will not be updated for a node which is supposed to
be contained and was already contained.
Change-Id: I8cabe56ad897b6027e11aa5b17175295391aa3ac
This change modifies "reputation change trigger" logic for dq and
suspension in order to:
* count only nil -> not-nil and not-nil -> nil as "reputation changes"
* do not count the timestamp updating (not-nil -> not-nil) as a
reputation change
Change-Id: Ie57c97e80e5f3b368e2f2dc004e680a2f9416d1c
Users with a partner package plan should be unable to replace their
plan's coupon. This change enforces this behavior by rejecting coupon
application attempts from users that meet this criteria.
Change-Id: I6383d19f2c7fbd9e1a2826473b2f867ea8a8ea3e
This bumps common, such that things build with Go 1.20.
Also, adds `go vet` checks for testsuite/storjscan and testsuite/ui.
The latest golang.org/x/bcrypt has a check that the new password is less
than 72 bytes, because bcrypt silently discarded them. This means our
own password validation has the same limitation. Old passwords should
still work fine.
Change-Id: Ibb8735b15eeb91460145906b81ae4e365e9ac418
Testplanet tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because
currently we have multiple queries which are doing full table scan and it's not trivial to change.
https://github.com/storj/storj/issues/5471
Change-Id: Ia2fcbfb9102424d58f95e00071329454a8c1066e
While splitting GC into two parts, bloom filter generation and bloom
filter sending, we missed to remove segments loop dependency from boom
filter sending part.
Change-Id: I48f213b0c0f8583e24fbb2bdcbfced518abe74cb
To improve deletion of old entries in project_bandwidth_daily_rollup
we need index on `interval_day` column which is used to find those old
entries.
As an addition we are changing interval how often deletion is executed
from 7 to 1 day. We would like to have smaller portion of data to
delete.
Fixes https://github.com/storj/storj/issues/5465
Change-Id: Ie18ebe859887b93d6e4e6065a61fb9214c7ad27a
we have two more fields in the database (noise_proto and
noise_public_key) that now need to go into pb.NodeAddress when
returning AddressedOrderLimits.
the only real complication is making sure type conversions between
database types and NodeURLs and so on don't lose this new
pb.NodeAddress field (NoiseInfo). otherwise this is a relatively
straightforward commit
Change-Id: I45b59d7b2d3ae21c2e6eb95497f07cd388d454b3
add descriptions for freeze and unfreeze user endpoints and regenerate
table of contents. This additionally added the oauth endpoints and one project limits POST parameter to the ToC
Change-Id: I05025f1f3a11c3775a4f59b01569ccb419d72858
Satellite DB tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because currently
we have multiple queries which are doing full table scan and it's not
trivial to change.
We may change that behavior when we will figure out how to skip
specific query from detection or we will fix all problematic queries.
https://github.com/storj/storj/issues/5471
Change-Id: Icafe782257a0d353e8bcdf6fa8a19c20b1091a0b
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds a method to the class representing the reverify queue
in the database, allowing us to get the list of every node that has at
least one record in the reverification queue.
Refs: https://github.com/storj/storj/issues/5431
Change-Id: Idce2633b3d63f2645170365e5cdeb2ea749fa9cb
This change causes the bucket's partner info to be used rather than the
user's when calculating project usage prices. This ensures that users
who own differently-partnered buckets will be charged correctly for
usage based on the specific bucket they are utilizing.
according to the bucket's partner.
Related to storj/storj-private#90
Change-Id: Ieeedfcc5451e254216918dcc9f096758be6a8961
The CASE expression used to determine which value to set
last_software_update_email to did not have an ELSE clause. Therefore,
when the node is both below the minimum version and did not receive a
version update email (no condition is true), the value would be set to
NULL.
Additionally, replace `time.Now()` with `timestamp` in the check to
determine if the email cooldown has passed.
Change-Id: I2e2e93f1a865e123ed8b665be9621cebfb72236f
Emails should not contain user input that could be used by malicious
agents to deliver a message. Usernames have been removed from
account activation emails, and project names have been removed from
project invitation emails.
References storj-private#133
Change-Id: Ic05921149b409145df109c0966ea5dfd86d86eb1
For bucket_bandwidth_rollups we are trying to insert lots of entries
with empty bucket name and project id. Those are inserts from orders
created by repair, audit and GE. High load on the same primary key
(the same range) is causing many retries and that's affect all inserts
as we are putting 1000 entries into DB a once.
This change solves this problem by not storing into
bucket_bandwidth_rollups other actions then GET and PUT. Those actions
are only important from bucket bandwidth usage perspective because
those are actions performed by users. Other actions (repair, audit or
GE) are also stored in storagenode_bandwdith_rollups so we will still
have access to them e.g. for statistic purposes.
https://github.com/storj/storj/issues/5332
Change-Id: Ibb5bf0a4c869b0439dc65da1c9342a38ca2890ba
Sorting by primary key before inserting data into DB is fixed.
Earlier we were sorting input slice of BucketBandwidthRollup but then
we were putting all entries into map to rollup input data. Iteration
over map with a range loop doesn't guarantee any specific order so we
were loosing sorted order when we were creating with this map slices to
use with DB insert.
New code is also using map but when map is full its sorting map keys
separately and iterates over them to get data from map.
https://github.com/storj/storj/issues/5332
Change-Id: I5bf09489b0eecb6858bf854ab387b660124bf53f
`overlay.(*Service).UpdateReputation()` takes a "reputationChanges"
parameter, a slice of node events indicating whether we think the node's
disqualification or suspension status is changing. This is necessary so
that the overlay service can notify the nodeevents DB about these
changes.
In several cases, however, this list of events is not constructed
correctly, because of missing information about the previous state.
In most cases, this is because the node was offline, and the order limit
creation functions (which usually obtain and return the prior reputation
status) ignored that node.
This change makes it so that all callers to
`overlay.(*Service).UpdateReputation()` can be expected to provide a
correct list of change events (as correct as feasible, given that we
can't lock the node's information in the database during the entire
operation).
It ended up that there was only one caller we needed to worry about, and
that was reputation.(*Service).ApplyAudit(). So the bulk of this change
is teaching that function how to recognize when the prior reputation
status was not filled in, and fill it in.
Refs: https://github.com/storj/storj/issues/5464
Change-Id: I52ce385fc9c0ce3b283b998d517998e7f4ec8792
Affected packages admin,attribution,console,metainfo,satellitedb,web,payments
This change removes the satellite/rewards package and its related usages.
It removes references to APIKeyInfo/PartnerID, Project/PartnerID
and User/PartnerID.
Issue: https://github.com/storj/storj/issues/5432
Change-Id: Ieaa352ee848db45e94f85556febdbcf1444d8c3e
Add migration tool (and test) to update salt column in projects table
with the SHA-256 hash of the project ID when null
Issue https://github.com/storj/storj-private/issues/66
Change-Id: Ib8d484ac8d6ee25859064d803e2ac8fb46b45921
Our DB support in storj/private was updated to enable basic context
support for executing SQL queries. This change requires some small
adjustments as not all parts were working correctly.
storj/private commit with change:
4bc77107b7acfcc2f7ad65796d5dd3d7c64801e4
Change-Id: I64d7ed92788ea0920d12cecd1aa0e414720e9b9c
When running pay invoices command skip invoices that has due date set, so
customers can still pay it themselves until due date.
https://github.com/storj/storj/issues/5453
Change-Id: I8e557062491ab0c8246b28bc5ca57e845eb32e29
This is automated test around metabase tests. It's detecting queries
which were performing full table scan during test execution.
After merging this and checking that this is not problematic in any way
we will enable this also for testplanet tests.
One query was adjusted to avoid full table scan and pass new check.
https://github.com/storj/storj/issues/5471
Change-Id: I2d176f0c25deda801e8a731b75954f83d18cc1ce
When there is no wallet in the database for a particular customer
return 404 http response status code instread of internal server error.
Change web/satellite payments API to return empty wallet on 404 response
code instead of throwing an error.
Change-Id: Ib44914f9ed002382258968fb81846f2b97dee0fe
implemented observer and partial, created new structures to keep mon
metrics remain in same way as in segment loop
Change-Id: I209c126096c84b94d4717332e56238266f6cd004
When we have problem with inserting bandwidth amounts into cache
or DB we are logging information about it but log entries are not
very detailed. This change adds bandwidth amounts to the log entry.
https://github.com/storj/storj/issues/5470
Change-Id: I55ccad837d17b141501d3def1dec7ad5f3acdb0b
Create a config to specify one-time prices and corresponding coupon
ids for partners.
github issue: https://github.com/storj/storj-private/issues/118
Change-Id: I67b26e7208b12ba8f0e6dc1b164dd9545b09cac0
This change allows users who register with a partner that has
different project usage prices to see the correct prices in the
satellite UI.
Resolvesstorj/storj-private#90
Change-Id: I06bde50db474b25396671a27e282ef5637efe85b
This change allows for overriding project usage prices for a specific
partner so that users who sign up with that partner do not need their
invoices to be manually adjusted.
Relates to storj/storj-private#90
Change-Id: Ia54a9cc7c2f8064922bbb15861f974e5dea82d5a
Add node tally ranged loop observer and partial.
Add node tally randed observer to range loop peer.
Add config flag to select which loop to use for node tally.
Update satellite core to use segement/ranged loop based on a flag.
Duplicate existing node tally test but using ranged loop.
Change-Id: I6786f1a16933463fab5f79601bf438203a7a5f9e
Small cleanups of the observer stats init code:
1. Use sync.Once for race free addition to the monitoring chain
(purely defensive)
2. Set the observer durations before adding to the monitoring chain on
first use.
3. observerDurations slice does not need to be initialized to non-nil
Change-Id: I9ae8ec96debc7d52c4ee5d22762a89f21bb2e38c
* use the same DB application name for satellite and metabase
* use noop orders DB implementation to avoid storing allocated bandwidth
in DB
Change-Id: I20e88c694d38240fe1a20c45719e210cfb76402c
bucket_bandwidth_rollups table
We have performance problems with updating bucket_bandwidth_rollups. To
improve situation we can stop storing allocated bandwidth in this table.
This should reduce large number of updates which are comming from
metainfo endpoints, repair workers and audit.
Next step will be to drop `allocated` column completely from
bucket_bandwidth_rollups.
Allocated GET bandwidth is all we need and we are keeping it in
bucket_bandwidth_rollups table.
Change-Id: Ifdd26a89ba8262acbca6d794a6c02883ad0c0c9b
On generated console api endpoints allow either the project ID or the
public ID to be used as the ID parameter.
github issue: https://github.com/storj/storj/issues/5412
Change-Id: Ic9901ed273931a50ae12f20142a3c4938dfcc8c0
When an observer errors we still want to finish the other observers.
This changes store the error and continues the loop, skipping
the observer which errored out and setting the duration metric to -1.
When the error occurs in the process stage, it does continue the other
ranges of the same observer. It removes the observer entirely after the process
stage. To improve this would make it more complex due to race
conditions.
Closes https://github.com/storj/storj/issues/5389
Change-Id: I528432c491d4340817d6950f1200ee2b9e703309
Move the IsAuthenticated check until after initial parameter
parsing/validation. IsAuthenticated will be more expensive than
parsing/validation, so we should fail before auth if possible.
Change-Id: I96a020892eabcb750e8ec9ecc1d8b7d9bf8bf573
Add option AsOfSystemTime to segment provider to make it equivalent to
the old segment loop.
There's no comment on what it does because it's pretty complex and
makes no sense, but we can improve it later.
closes https://github.com/storj/storj/issues/5434
Change-Id: I8f09b03803e681e2fd41008c5dba67804b0f37a1
The `coupons`, `offers`, `coupon_usages`, `coupon_codes`, and
`user_credits` tables are not used anymore. They exist due to
legacy billing code which has already been removed.
Change-Id: Ie93af90a06e5247a74015af2a78a223d69249565
The shell script has different behavior on different operating systems,
and now has enough logic that it makes sense to put it into a go script.
This change replaces dbx/gen.sh with dbx/gen/main.go, which accomplishes
the same thing.
Change-Id: Ibb53ebf9c2475377aae1165cfe245140d7162026
The current satellitedb.dbx has grown quite big over time.
Split the single file into multiple smaller ones.
Change-Id: I8d6ca851b834ac60820aff565906f04aab661875
Update get usage-limits, daily-usage and salt endpoints to support
both project-ID and project-PublicID.
Issue: https://github.com/storj/storj/issues/5411
Change-Id: Iff0114a295d1a479b141bfffbfb31599844d1fc0
Update the delete API key by name and projectID to support project-ID
and project-publicID.
Issue: https://github.com/storj/storj/issues/5410
Change-Id: I3bd11b9c3ae1ad6ce662dfc18b42779d2e4edf9b
Add an observer to monitor ranged segment loop progress.
Tested by running the segment loop in storj-up and navigating to
http://<container>:11111/mon/stats and there is the entry:
rangedloop-live,scope=storj.io/storj/satellite/metabase/rangedloop numSegments=364523630000.000000
part of https://github.com/storj/storj/issues/5223
Change-Id: If3d2774d2f17f51eac86f47c6dda1fb8ad696dfe
Removing all references to column last_verification_reminder which is to be removed, due to new column verification_reminders
Issue: https://github.com/storj/storj/issues/4560
Change-Id: I7c9a426e946c7aed58e62c1eef80629daf6b1272
Support interruption of the ranged segment loop through context.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
Add public ID field to graphql Project so it can be used on the front
end. Additionally public_id needed to be added to the ListByOwnerID sql
query which is called by graphql OwnedProjectsQuery.
github issue: https://github.com/storj/storj/issues/5408
Change-Id: I2ec04363c20493dc0f9c70b6d1610f724f18ec2f
Wire up duration measurement of observers with monkit.
Tested by attaching a SleepObserver, starting the rangedloop in storj-up
and navigating to http://<container>:11111/mon/stats. It reports the
following statistic:
completed-observer-duration,observer=*rangedlooptest.SleepObserver,scope=storj.io/storj/satellite/metabase/rangedloop duration=10.000117
Change-Id: Ief131d34001dd5d3ba1d7be6f161986e1f66440d
Before we introduced objects versions internally move operation was
always failing when under target location object exists. But then we
had only single version 1 all the time. With versions different than 1
we need to check all existing objects under target location.
To be backward compatible with our API new logic looks like this:
* if there is no object under target location use source object version
as target version
* if there are only pending objects find first free (highest) version
which could be used to move object there
* if there is committed object under target location reject move
operation
Fixes https://github.com/storj/storj/issues/5403
Change-Id: I717f3e7c42470b406287d6ec335f6f057d3fc3b5
This change implements the ranged loop observer to replace the audit
chore that builds the audit queue.
The strategy employed by this change is to use a collector for each
segment range to build separate per-node segment reservoirs that are
then merge them during the join step.
In previous observer migrations, there were only a handful of tests so
the strategy was to duplicate them. In this package, there are dozens
of tests that utilize the chore. To reduce code churn and maintenance
burden until the chore is removed, this change introduces a helper that
runs tests under both the chore and observer, providing a pair of
functions that can be used to pause or run the queueing function.
https://github.com/storj/storj/issues/5232
Change-Id: I8bb4b4e55cf98b1aac9f26307e3a9a355cb3f506
