We have some types that are only valid for satellite usage. Such types
are SatStreamID and SatSegmentID. This change moves those types to
storj/storj and adds basic infrastructure for generating code.
Change-Id: I1e643844f947ce06b13e51ff16b7e671267cea64
Some of metainfo endpoint methods are not used but we still have
implementation there. This change removes unused code and returns
unimplemented error for those methods.
Change-Id: I74e75e0caff76a4f5d119ee989b687b4e9d6e6f9
This change removed unused 'createRequests' struct. As far I remember it
was used to help validating old metainfo beginObject/commitObject flow.
Change-Id: I0f139b9934196d73f26eafa347ba5605722f3a55
As part of the Metainfo Refactoring, we need to make the Metainfo Loop
working with both the current PointerDB and the new Metabase. Thus, the
Metainfo Loop should pass to the Observer interface more specific Object
and Segment types instead of pb.Pointer.
After this change, there are still a couple of use cases that require
access to the pb.Pointer (hence we have it as a field in the
metainfo.Segment type):
1. Expired Deletion Service
2. Repair Service
It would require additional refactoring in these two services before we
are able to clean this.
Change-Id: Ib3eb6b7507ed89d5ba745ffbb6b37524ef10ed9f
- Remove flag for switching off offline audit reporting.
- Change the overlay method used from UpdateUptime to BatchUpdateStats, as this
is where the new online scoring is done.
- Add a new overlay.AuditOutcome type: AuditOffline. Since we now use the same
method to record offline audits as success, failure, and unknown, we need to
distinguish offline audits from the rest.
Change-Id: Iadcfe10cf13466fa1a1c2dc542db8994a6423355
Missed one case of Unmarshal in the previous commit for V0 files (0f4e4969b7)
In V1, unmarshalling was being attempted before the checksum was
verified, so this commit moves those calls to the end of the V1 ReadOne
function.
Change-Id: Ic0b49f0bbc91fb61fb28af6003060994d0af22ed
In V0 orders files, unexpected EOF is correctly treated as a file
corruption, but pb.Unmarshal can also fail, and this is not treated as a
file corruption. This commit fixes that.
Change-Id: I6b446a10f4b1a5a44e832cbcc9bf8b2548cfcfeb
This fixes a slow query that was taking up to 4 seconds in production
SELECT node_id, path, piece_num, root_piece_id, durability_ratio, queued_at, requested_at, last_failed_at, last_failed_code, failed_count, finished_at, order_limit_send_count
FROM graceful_exit_transfer_queue
WHERE node_id = '[redacted]'
AND finished_at is NULL
AND last_failed_at is NULL
ORDER BY durability_ratio asc, queued_at asc LIMIT 300 OFFSET 0;
Change-Id: Ib89743ca35f1d8d0a1456b20fa08c683ebdc1549
Fix the DeleteAccount handler to return 501 HTTP status code because
it's what corresponds for a "Not Implemented" status.
Add a black box test for the DeleteAccount to ensure that always return
an error response because, at this time, we don't allow to delete
accounts through the API.
This test was not added to the corresponding commit
https://review.dev.storj.io/c/storj/storj/+/2712 due to the rush to
fix it.
Change-Id: Ibcf09e2ec52f182a8a580d606c457328d94c8b60
branch
Currently, we are testing previous release version upgrading to latest
master on each master build
However, this behavior is only desired when the test is running on a
release branch.
Change-Id: Iaeb66f44951c9e4934ca3c8316d1e490d7958239
A year ago we made the audit service deleting expired segments.
Meanwhile, we introduced an expired deletetion sub-service in the
metainfo service which sole purpose is deleting expired segments.
Therefore, now we are removing this responsibility from the audit
service. It will continue to avoid reporting failures on expired
segments, but it would not delete them anymore.
We do this to cleanup responsibilities in advance of the metainfo
refactoring.
Change-Id: Id7aab2126f9289dbb5b0bdf7331ba7a3328730e4
In production we are seeing ~115 storage nodes (out of ~6,500) are not using the new SettlementWithWindow endpoint (but they are upgraded to > v1.12).
We analyzed data being reported by monkit for the nodes who were above version 1.11 but were not successfully submitting orders to the new endpoint.
The nodes fell into a few categories:
1. Always fail to list orders from the db; never get to try sending orders from the filestore
2. Successfully list/send orders from the db; never get to calling satellite endpoint for submitting filestore orders
3. Successfully list/send orders from the db; successfully list filestore orders, but satellite endpoint fails (with "unauthenticated" drpc error)
The code change here add the following to address these issues:
- modify the query for ordersDB.listUnsentBySatellite so that we no longer select expired orders from the unsent_orders table
- always process any orders that are in the ordersDB and also any orders stored in the filestore
- add monkit monitoring to filestore.ListUnsentBySatellite so that we can see the failures/successes
Change-Id: I0b473e5d75252e7ab5fa6b5c204ed260ab5094ec
This preserves the last_ip_and_port field from node lookups through
CreateAuditOrderLimits() and CreateAuditOrderLimit(), so that later
calls to (*Verifier).GetShare() can try to use that IP and port. If a
connection to the given IP and port cannot be made, or the connection
cannot be verified and secured with the target node identity, an
attempt is made to connect to the original node address instead.
A similar change is not necessary to the other Create*OrderLimits
functions, because they already replace node addresses with the cached
IP and port as appropriate. We might want to consider making a similar
change to CreateGetRepairOrderLimits(), though.
The audit situation is unique because the ramifications are especially
powerful when we get the address wrong. Failing a single audit can have
a heavy cost to a storage node. We need to make extra effort in order
to avoid imposing that cost unfairly.
Situation 1: If an audit fails because the repair worker failed to make
a DNS query (which might well be the fault on the satellite side), and
we have last_ip_and_port information available for the target node, it
would be unfair not to try connecting to that last_ip_and_port address.
Situation 2: If a node has changed addresses recently and the operator
correctly changed its DNS entry, but we don't bother querying DNS, it
would be unfair to penalize the node for our failure to connect to it.
So the audit worker must try both last_ip_and_port _and_ the node
address as supplied by the SNO.
We elect here to try last_ip_and_port first, on the grounds that (a) it
is expected to work in the large majority of cases, and (b) there
should not be any security concerns with connecting to an out-or-date
address, and (c) avoiding DNS queries on the satellite side helps
alleviate satellite operational load.
Change-Id: I9bf6c6c79866d879adecac6144a6c346f4f61200
Check binary version on self-update instead of current process
version to prevent updating already updated binary.
Add info logs to report current version of service beeing
updated.
Change-Id: Id22dee188a99d6d45db925104786f49f5d3a61ae
This change allows the creation and deletion of api keys via the admin API.
It adds two methods for deletion, one via the name and projectID and the
second one via the serialized apikey directly.
Change-Id: Ida8aa729e716db58c671a901e5f7e39253e89a0d
* docs: update graceful exit refactoring doc
Co-authored-by: paul cannon <thepaul@storj.io>
Co-authored-by: Jennifer Li Johnson <jennifer@storj.io>
Co-authored-by: Maximillian von Briesen <mobyvb@gmail.com>
WHAT:
changed estimation table row order.
WHY:
to show gross total for selected period to avoid misunderstanding
when held amount is bigger than paid multiple times.
Change-Id: I03881c8af682372139a378030acf04f199d3260b
We are moving an error into rejectErr since its preventing storage nodes from being able to settle other orders.
Change-Id: I3ac97c340e491b127f5e0024c5e8bd9f4df8d5c3
