On BSD, the storagenode-updater falls back to renaming the storagenode without
doing anything to restart the service.
Like the approach we have for linux, this change finds the process ID of the
storagenode using pgrep and sends an interrupt signal to the process.
Closes https://github.com/storj/storj/issues/5333
Change-Id: Icced90ea3e831528804784c2170a3b8b14952e8c
We have to wait until the slowest node is done being tested before we
can move on to the next of segments. Since the slowest node can be
arbitrarily slow, we'll set a timeout and treat too-slow nodes as
temporarily offline.
Change-Id: I80fe865dd4e8f826700430fb0140c2d3aefca381
When we are verifying pieces by downloading the first byte, if we
encounter a timeout, treat the node as if we failed to connect to it,
and log the error once instead of twice.
Change-Id: I70602d554183c98f1213f3ffb1bfec41100ea0e7
This csv file was being closed as soon as the service was created.
All subsequent writes to the closed file handle produced errors,
which were logged but otherwise ignored.
Instead, we would like the file to remain open and writable, until
the service is destroyed.
Change-Id: Ib29944d25b2f5b2d0f90fdbdcde44fea8d769321
The copyFile method has some safeguards to ensure that the multipart
write is aborted. This is accomplished by always calling abort on the
MultiWriteHandle when the copy is finished, whether or not there was a
failure or it was successfully committed. If the copy was committed,
then this RPC is a no-op on the metainfo server.
Regardless, the calls to abort to constitute an additional RPC to the
satellite for no benefit. This is exacerbated by the fact that the code
currently ends up calling abort twice.
This change updates the libuplink-backed MultiWriteHandle implementation
to not call abort if the write is committed and vice-versa. This
eliminates the two wasteful RPC calls.
Change-Id: I13679234f6f473e9a93179e6791fb57eac512f25
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
Previously, if any pieces are still on disqualified nodes, this tool
would treat those pieces as fine (if the disqualified node is still
online) or temporarily unavailable (if the disqualified node is
offline). Instead, we should treat such pieces as lost.
This also fixes a slight problem with the code that handles a broken
alias. This is not likely to happen, but if we do see an alias that is
not in the alias map, we return an error instead of nil.
Change-Id: Ib4e2e729ef0535dd7bd9ce2f621680d9f959891c
Because it was originally intended to work on only a few pieces from
each segment at a time, and would frequently have reset its list of
online nodes, segment-verify has been taking nodes out of its
onlineNodes set and never putting them back. This means that over a long
run in Check=0 mode, we end up treating more and more nodes as offline,
permanently. This trend obfuscates the number of missing pieces that
each segment really has, because we don't check pieces on offline nodes.
This commit changes the onlineNodes set to an "offlineNodes" set, with
an expiration time on the offline-ness quality. So nodes are added to
the offlineNodes set when we see they are offline, and then we only
treat them as offline for the next 30 minutes (configurable). After that
point, we will try connecting to them again.
Change-Id: I14f0332de25cdc6ef655f923739bcb4df71e079e
The WithExists methods previously were not writing problematic pieces to
problem-pieces.csv. With this change, they will.
Change-Id: I51eadd3d8f4299e1efa787c9266a7aacfa525eb3
When this branch is followed, `audit.OutcomeFailure` is returned, and
`MarkNotFound()` is immediately called again (in
`(*NodeVerifier).Verify()`). Calling `MarkNotFound()` twice for the same
piece is not correct.
Change-Id: I1a2764bc32ed015628fcd9353ac3307f269b4bbd
It may help to know how much faster these methods are than the
alternative (asking nodes for each piece in turn).
Change-Id: Ieb7c963f62b662f72c84a49de8a09c065c14f782
It was ok as it was, but since we want to keep a close eye on progress
while the tool is running, it will help to have results written to the
output file immediately instead of after the buffer is full or the
program exits.
Change-Id: Ie027f05771a637afb06969ec775cd32b142b7635
This change is similar to
https://review.dev.storj.io/c/storj/storj/+/7687 but applied when
uploading from stdin with parallelism > 1.
Currently, the paralellism from stdin scales up to 3 or 4, but not
greater than that. If we buffer the content from stdin more aggressively
the parallelism scales to higher levels and reaches the performance of
reading directly from a file.
Change-Id: I1f447686a88074882709992ee6d52dd262e220fb
When Check == 0 (check all pieces), there is nearly always a piece left
in the retry count, so most segments get logged in segments-retry.csv.
This change makes it so we require retry>5 before adding to
segments-retry.csv (only in the check==0 case).
Change-Id: Iaea523c27eb777e3c248c27c7ef5effe77ae54cf
This new advanced flag configures libuplink to store in-memory the
erasure-coded pieces that are temporarily created during upload.
By default, libuplink writes the erasure-coded pieces as temp files on
the disk, but this results in additional IOPS that affect the
performance in hot-rodded scenarios.
If the erasure-coded pieces are kept in-memory and the system has enough
RAM, the upload speed may be boosted with 20-30%.
The flag is added as "advanced" as we don't recommend it by default.
Co-authored-by: Stefan Benten <mail@stefan-benten.de>
Change-Id: Icc54f03b6c0bc27c97126f6f1d22748d21a15959
* better error handling when Exists method is not avaialble on SN
* more optimal processing of response from Exists method
Change-Id: I6d61c09473e9f5ab76a4601720e8bd520767f4c2
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
Now that we are doing scalable piecewise reverifications, the code for
handling the old way of doing things (containment, pending audits,
reporting, testing) can now be removed.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ief1a75f423eff682e8f3d57804e343b3409a6631
This adds the capability to the segment-verify tool of checking all
pieces of every indicated segment.
Pieces which could not be accessed (i.e. we couldn't get a single
byte from them) are recorded in a csv file.
I haven't been able to test this in any very meaningful way, yet, but I
am comforted by the fact that the worst things it could possibly do are
(a) download pieces too many times, and (b) miss downloading some
pieces.
Change-Id: I3aba30921572c974993363eb36d0fd5b3ae97907
Provides the `segment-verify run buckets` command for verifying segments within a list of buckets.
Bucket list is a csv file with `project_id,bucket_name` to be checked.
https://github.com/storj/storj-private/issues/101
Change-Id: I3d25c27b56fcab4a6a1aebb6f87514d6c97de3ff
Because --readonly is default true, passing something like
--disallow-deletes=false would not actually update that
value because the readonly flag would override. this makes it
so that the --disallow-* flags override the --readonly and
--writeonly flags.
Also fixes some minor formatting issues with share like an
extra space after the "Public Access:" entry.
Simplifies the handling of the explicit "none" by making the
flags for the dates optional and using nil to signify that
the value was left unset.
Bump the go.mod to go1.18 to enable the use of generics and
add a small generic function. This can easily be backed out
if it causes problems.
Change-Id: I1c5f1321ad17b8ace778ce55561cbbfc24321a68
NewContainment will replace Containment later in this commit chain, but
for now it is not yet being used.
NewContainment will allow a node to be contained for multiple pending
reverify jobs at a time. It is implemented by way of the reverify queue.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I126eda0b3dfc4710a88fe4a5f41780618ec19101
The default 'info' level for the storagenode will dump dozens of
lines every second. This change adds the ability to configure
the log.level argument at run time using LOG_LEVEL env variable.
Co-authored-by: Clement Sam <clementsam75@gmail.com>
Uplink doesn't have a `save` command, however, it's referred on an error
message that's returned when the `access register` command is executed
without having any default access configured.
The correct command to mention is `import`.
Change-Id: Ia2092d02965737f421683fc98c52a51c9529b86e
Reputation updates during repair currently consumes a lot of database
resources. Sometimes increasing the rate of repair is more important
than auditing a node based on whether they have or don't have the
correct piece during repair. This is the job of the audit service.
This commit is to implement an intermediate solution from this issue: https://github.com/storj/storj/issues/5089
This commit does not address the more in-depth fix discussed here: https://github.com/storj/storj/issues/4939
Change-Id: I4163b18d78a96fadf5265789fd73c8aa8def0e9f
If we are processing list of segments (csv) we should not stop if one of
segments is not found in DB.
Change-Id: I720f85dc7601c2ca77032e20c1577de55092bd9b
Current option is to put stream id and position as an input but
it's not very efficient when we have long list of segments to repair.
This change adds option to read whole csv file and process each entry
one by one.
If command will have single argument then it will treat it as csv file
location and if will have two arguments then it will parse it just as
stream id and position.
Change-Id: I1e91cf57a794d81d74af0091c24a2e7d00d1fab9
Implements logic for satellite command to repair a single segment.
Segment will be repaired even if it's healthy. This is not checked
during this process. As a part of repair command will download whole
segment into memory and will try to reupload segment to number of new
nodes that equal to existing number of pieces. After successful
upload new pieces will completely replace existing pieces.
Command:
satellite repair-segment <streamid> <position>
https://github.com/storj/storj/issues/5254
Change-Id: I8e329718ecf8e457dbee3434e1c68951699007d9
This patch makes it possible to use `uplink share` in test environment (like storj-up) where authservice doesn't have full secure endpoint.
This supposed to be an undocumented feature (no flag, just a custom prefix) to avoid any confusion for regular users.
Change-Id: I256aefc944066e52c72224e7b6f1a593b5bc57f7
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
New flag 'MultipleVersions' was not correctly passed from metainfo
configuration to metabase configuration. Because configuration was
set correctly for unit tests we didn't catch it and issue was found
while testing on QA satellite.
This change reduce number of places where new metabase flags needs
to be propagated from metainfo configuration to avoid problems with
setting new flags in the future.
Fixes https://github.com/storj/storj/issues/5274
Change-Id: I74bc122649febefd87f665be2fba628f6bfd9044
The current deployment strategy requires that the GC bloomfilter generation process executes only once and exits.
Change-Id: I952991f126596aa165d1f2e9fce6f8548c21bdba
It's quite likely to hit some timelimit, rather than giving up
immediately, let's retry after the throttle amount.
Change-Id: I20944b058d771f5d4bfa0eea7a2c26cefcd74739
We want to send emails to SNOs. Node status changes go through the
overlay service, so it's a good place to add the mail service.
Add the mailservice.Service, satellite address, and satellite name to
overlay service. Also add feature flag --overlay.send-node-emails
Change-Id: I3bd2cb3bf22f9724954ce2374f8b651b902b3a24
Add getSalt to projects api. Add action, GET_SALT, on Store
Projects module to make the api request and return the salt
string everywhere in the web app that generates an access grant.
The Wasm code which is used to create the access grant has been
changed to decode the salt as a base64 encoded string. The names
of the function calls in the changed Wasm code have also been
changed to ensure that access grant creation fails if JS access
grant worker code and Wasm code are not the same version.
https://github.com/storj/storj-private/issues/64
Change-Id: Ia2bc4cbadad84b066ca1882b042a3f0bb13c783a
there's not really anything better to send. uplinks have
rotating node ids on each startup, so that's not right
here. i don't think anyone will use instance id for
uplinks so let's just fold and send nothing.
Change-Id: I2511605e95eba1816d662d385b28d5feab8c4eb0
The flags weren't properly loading from config.
The code assumed that every node that's online for downloading also have
data uploaded to them -- which is not true.
Change-Id: Ifd65a47b9eca5b4841231928244fab17acbde6fb
This patch addresses the following issues:
1. Running full migration in cockroachdb is quite slow. We already have an approach for unit tests to start from the latest snapshot. This patch makes it possible to use it for integrations tests.
2. Migration requires executing a separated command which makes it hard to run application in containerized test environments (like storj-up) or from IDE. This patch introduces a hidden flag to run migration.
3. Test user creation is painful. We do it with calling GraphQL + admin API. Providing an option with testuser makes the integration tests significant more simple (especially as the projectID -> access grant can be predictable)
Change-Id: I61010728727b490ea6aac32620f2da0484966727
Add an extra parameter to the pay-invoices command that can be used to restrict which invoices will have a payment attempted in stripe. The parameter should be of the form MM/DD/YYY and any invoices created on or after the date will have token balances applied and be processed for payment according to stripe subscriptions settings.
Change-Id: I5da5070d3ac97f45c05c02f2849254bdc44413c3
This change introduces the generate-invoices satellite billing
command whose functionality is equivalent to running
apply-free-coupons, prepare-invoice-records,
create-project-invoice-items, and create-invoices in order.
Invoice finalization must still be performed separately.
Change-Id: Ia3d80b95eef1f2776c38bd730ed731e42ec4c35e
allow multiple source paths and a single destination path.
this makes commands like `uplink cp foo* sj://bucket` work
as expected.
require at least one remote path when copying. this ensures
that users don't accidentally overwrite their local files
with other local files, which is almost never what they wanted
because they would just use cp.
Change-Id: I28948f4ff735d29db06de81fc8c2a15b9f4ee3f5
Due to a programming error it was possible to "share" without an expiry
implicitly. This pollutes the auth service database.
fixes https://github.com/storj/storj/issues/5188
Change-Id: I04a345662c26948c6be6c1ae6bee3b5a583bebc4
* Disallow too large listing limit, which would cause a lot of memory to
be consumed.
* Fix throttling logic and add a test.
* Fix read error handling; depending on the concurrency it can return
the NotFound status either in the Read or Close.
Change-Id: I778f04a5961988b2480df5c7faaa22393fc5d760
Rather than using Invoice Items to account for storjscan token payments, credit notes will be used and applied to the users finalized invoice. This credit note will reduce the amount due of the users invoice based on the amount of storj token balance the user has on the satellite. Applying credit notes to a finalized invoice also requires that the invoice not be automatically paid when finalized. Therefore, a new command (pay-invoices) was added to initiate payment for users invoices.
Change-Id: Ie539375a10e842e3cb64bf0140834bbab0774f54
They are needed for segment-verify tool.
Also rename some of the conversion methods to make clear,
which of them have side-effects.
Change-Id: Ie9a0952548e9ed5068c7a30c2fd2134b07139bca
This adds parts for:
1. iterating over the segments
2. using an interface for writing the segments
3. stubs for handling deleted segments
Change-Id: I76a17cac6deb0b6c042a8ab7c4155a890db9da84
This patch fix the beavior of the distributed tracing reporter.
1. For developer build we don't append the date
* We don't need to separate service instances in jaeger (search by trace ID)
* It's usually 0000-00-000 anyway as release.sh is not used for dev builds
2. Tracing ID MUST be unique
* Instead of trusting the user to set a unique value (how can they do it?), we generate a random number
3. To make it possible to find the trace, there is a new flag to print out the generated tracing ID
4. Monkit `remoteTrace` call is replaced with normal monkit Task.
* remoteTrace call assumes that we have a parent span in an other service (which is already sent to the server)
* Here we must send out the parent span, as this is the beginning of the trace
5. We properly close the Jaeger UDP collector, and we wait until remaining messages are sent out
Change-Id: Iabf5abf25f4f20881188f88edcbadca95ac74927
Implements creating roughly load-balanced set of batched
that can be used to make multiple requests.
Change-Id: I349b276176dcb8ba9163e7e06a94509d73fa5ddc
This is to update all projects to have a public_id if they do not have
one.
github issue: https://github.com/storj/storj/issues/4861
Change-Id: Icfa42b62e15ca75d3c04a0aab48a3c3b0f3a9d6e
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket. This change is extending satellite binary
with appropriete command.
New GC service for collecting bloom filter will be a subsequent
change.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: Ibc03e119c340919cf468fc1f5a4f3d187bb3a5a1
As a reminder: latest clingy removed the requirement of having custom context (which made the usage of context.WithValue harder) and uses simple context instead.
Clingy saves the stdin/stdout/stderr to the context (earlier to separated context type) to make it available for unit testing.
Change-Id: I8896574f4670721de43a577cd4b35952e3b5d00e