As part of fixing the IO priority of filewalker related
processes such as the garbage collection and used-space
calculation, this change allows the initial used-space
calculation to run as a separate subprocess with lower
IO priority.
This can be enabled with the `--storage2.enable-lazy-filewalker`
config item. It falls back to the old behaviour when the
subprocess fails.
Updates https://github.com/storj/storj/issues/5349
Change-Id: Ia6ee98ce912de3e89fc5ca670cf4a30be73b36a6
the parallelism and parallelism-chunk-size flags
which used to control how many parts to split a
segment into and many to perform in parallel
are now deprecated and replaced by
maximum-concurrent-pieces and long-tail-margin.
now, for an individual transfer, the total number
of piece uploads that transfer will perform is
controlled by maximum-concurrent-pieces, and
segments within that transfer will automatically
be performed in parallel. so if you used to set
your parallelism to n, a good value for the pieces
might be something approximately like 130*n, and
the parallelism-chunk-size is unnecessary.
Change-Id: Ibe724ca70b07eba89dad551eb612a1db988b18b9
We avoid putting more than one piece of a segment on the same /24
network (or /64 for ipv6). However, it is possible for multiple pieces
of the same segment to move to the same network over time. Nodes can
change addresses, or segments could be uploaded with dev settings, etc.
We will call such pieces "clumped", as they are clumped into the same
net, and are much more likely to be lost or preserved together.
This change teaches the repair checker to recognize segments which have
clumped pieces, and put them in the repair queue. It also teaches the
repair worker to repair such segments (treating clumped pieces as
"retrievable but unhealthy"; i.e., they will be replaced on new nodes if
possible).
Refs: https://github.com/storj/storj/issues/5391
Change-Id: Iaa9e339fee8f80f4ad39895438e9f18606338908
The cmd/storagenode/main.go is a big mess right now with so many
unneeded config structures initialized and shared by several
subcommands.
There are many instances where the config structure of one subcommand
is mistakenly used for another subcommand.
This changes is an attempt to clean up the main.go by moving the
subcommands to a separate `cmd_*.go` files with separate config structures
for each subcommand.
Resolves https://github.com/storj/storj/issues/5756
Change-Id: I85adf2439acba271c023c269739f7fa3c6d49f9d
updates flag descriptions with correct punctuation, and fix errors
to not be capitalized.
Updates #5623
Change-Id: I9c6ef6d9888b2fb90b17db8775cc6abe803e102f
The assignemnt to `err = nil` is not used in the rest of the code,
however, this was a protective err = nil assignment.
Change-Id: Id70fb2a2e68b91e2481952d865334e603ca41188
adds an additional flag to return an additional TXT record that will
enable TLS on custom domains with Linksharing.
Closes#5623
Change-Id: I941616362d7dcd9aec20dfd10346e483021516a4
Option added to `uplink access setup` and `uplink access create`
commands to disable object key encryption.
Related to https://github.com/storj/storj/issues/5678
Change-Id: I4789a94143742ff4b232fd60decc029ad2883c2a
We have lots of direct DB requests to get API keys. It should be handled
by cache but default value is very low at the moment.
Fixes https://github.com/storj/storj/issues/5665
Change-Id: I214ebebd6e397cacff80b2f36dc4a2eea388f93d
We do regular testing with executing uplink. But sometimes the recorded execution time showed spikes.
Would be nice to know the reason of the spikes (just internet blip, or something what we should be worried about).
We can collect distributed traces, but it's not easy to find the right trace in Jaeger.
* We can provide a random trace-id, but it should be persisted / processed
* We can also save standard output and use `--trace-verbose` which prints out the used trace id, but it's also complicated to collect all of them in a DB
Would be nice to attach additional metadata to traces to make sure that we can filter all traces of one specific kind of test.
This patch provides this feature:
* It always adds hostname to the trace (if you opt-in to distributed tracing, which is turned off by default)
* Additional tags can be defined with CLI flag
Tags can be used to find the right trace in Jaeger (or in Elastic search backend of Jaeger).
Change-Id: I08f10023bbebd783f812cfca95ac6237360ac2b0
Remove generate-missing-project-salt migration tool code and related
tests. This migration has already been run and this code is no longer
needed.
Issue https://github.com/storj/storj-private/issues/163
Change-Id: I4e36dcd95a07c5305c597113a7fd08148e100ccc
This test involves a satellite with dev defaults (DistinctIP=no) being
upgraded past commit 2522ff09b6, which
means we need to run the dev-defaults-satellite-upgrade migration SQL
to avoid getting DistinctIP=yes behavior (which breaks the tests).
Change-Id: I29fb596d1ffa568dad635d98cfe9abacd3aaa48f
Only API peer needs access to order DB (and rollups cache) because it's
only place where we are creating orders for PUT and GET operations. For
other peers like auditor and repairer we can set noop implementation to
reduce number of dependencies needed for them.
Change-Id: Ic32d1879f0b97ffc4516f401898e31e95ae892e4
It was surprising that `satellite auditor` complained about SMTP mail settings, even if it's not supposed to sending any mail.
Looks like we can remove the mail service dependency, as it's not a hard requirement for overlay.Service.
Change-Id: I29a52eeff3f967ddb2d74a09458dc0ee2f051bd7
quic is still configurable based on the quic rollout
environment variables in storj.io/common. this stops
using a method removed in:
https://review.dev.storj.io/c/storj/uplink/+/9815
Change-Id: Ibfe28cfb19e5672630970b9e2c8c6ac0c98d4822
I use `uplink share` command but I always fail to set the --not-before parameter.
* Usually I try +2d when I see in the help that +2h is possible --> fail
* When it fails, I try to set explicit date, like 2012-12-23 --> fail
This patch makes it possible to use:
* day duration (like +3d)
* shorter date definition (like `2023-12-12` or `2023-12-12T12:40`)
Change-Id: I2243b36f59c8929eb0473c4bb4fed19220890c71
The tests were using global variables for keeping the mock state, which
was indexed by the satellite ID. However, the satellite ID-s are
deterministic and it's possible for two tests end up using the same
mocks.
Instead make the mock creation not depend on the satellite ID and
instead require it being configured via paymentsconfig.
This fixes TestAutoFreezeChore failure.
Change-Id: I531d3550a934fbb36cff2973be96fd43b7edc44a
This code is essentially replacement for eestream.CalcPieceSize. To call
eestream.CalcPieceSize we need eestream.RedundancyStrategy which is not
trivial to get as it requires infectious.FEC. For example infectious.FEC
creation is visible on GE loop observer CPU profile because we were
doing this for each segment in DB.
New method was added to storj.Redundancy and here we are just wiring it
with metabase Segment.
BenchmarkSegmentPieceSize
BenchmarkSegmentPieceSize/eestream.CalcPieceSize
BenchmarkSegmentPieceSize/eestream.CalcPieceSize-8 5822 189189 ns/op 9776 B/op 8 allocs/op
BenchmarkSegmentPieceSize/segment.PieceSize
BenchmarkSegmentPieceSize/segment.PieceSize-8 94721329 11.49 ns/op 0 B/op 0 allocs/op
Change-Id: I5a8b4237aedd1424c54ed0af448061a236b00295
This change removes the trailing slash from the account activation and
password recovery URLs, making them consistent with the rest. The URLs'
previous forms are still supported, however, in order to not invalidate
emails containing them.
Resolvesstorj/customer-issues#491
Change-Id: Ie774a87698d8e9edd1836611968fc3911c6cc56f
Peer for generating bloom filters will be able to use ranged loop.
As an addition some cleanup were made:
* remove unused parts of GC BF peer (identity, version control)
* added missing Close method for ranged loop service
* some additional tests added
https://github.com/storj/storj/issues/5545
Change-Id: I9a3d85f5fffd2ebc7f2bf7ed024220117ab2be29
Previously we were exposing the testing facilities via interface casting
the necessary parts, however, when things are not part of the main
satellite.DB interface they need to be manually propagated. Rather than
relying on using hidden methods lets expose things as long as they don't
create a direct dependency to the database driver.
Change-Id: I2eb7d8b60f4b64de1320c2d32581f7be267c0f57
Users with a partner package plan should be unable to replace their
plan's coupon. This change enforces this behavior by rejecting coupon
application attempts from users that meet this criteria.
Change-Id: I6383d19f2c7fbd9e1a2826473b2f867ea8a8ea3e
listing "/" on windows was not returning files from
the root because it was adding an extra separator
unconditionally. the docs for filepath.Clean say
The returned path ends in a slash only if it represents
a root directory, such as "/" on Unix or `C:\` on Windows.
so we need to add the slash only if it doesn't already have
one to avoid the double slash problem while still ensuring
the path ends with a slash.
Change-Id: I98afc1f1a06bb06035c7647ecb0da3214080162d
Move global variables to be local for each test to reduce the likelihood
of unexpected bugs. Also parallelize the different db tests and clean up
unnecessary lines/checks.
Change-Id: I9dc3894d0945430908b10af5aeeba2f9246caf2a
Satellite DB tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because currently
we have multiple queries which are doing full table scan and it's not
trivial to change.
We may change that behavior when we will figure out how to skip
specific query from detection or we will fix all problematic queries.
https://github.com/storj/storj/issues/5471
Change-Id: Icafe782257a0d353e8bcdf6fa8a19c20b1091a0b
This change causes the bucket's partner info to be used rather than the
user's when calculating project usage prices. This ensures that users
who own differently-partnered buckets will be charged correctly for
usage based on the specific bucket they are utilizing.
according to the bucket's partner.
Related to storj/storj-private#90
Change-Id: Ieeedfcc5451e254216918dcc9f096758be6a8961
`storage.KeyValueStore` requires ordered iteration, which redis
doesn't support natively. This would require loading all the keys
into memory and then processing them, rather than iterating over them
one-by-one.
This adds a temporary `IterateUnordered` to handle the migrations
more gracefully.
Change-Id: I55b763500523077c7ab8fdfad175c32cc7788e47
This tool is being removed because it has served its purpose and was blocking another removal from being verified.
Change-Id: Ie888aa7ae1b153a34210af3a5d5a3682b381ba82
Add migration tool (and test) to update salt column in projects table
with the SHA-256 hash of the project ID when null
Issue https://github.com/storj/storj-private/issues/66
Change-Id: Ib8d484ac8d6ee25859064d803e2ac8fb46b45921
Add a flag to enable/disable analytics so uplink can be run
non-interactively. Also when run non-interactively for the first time
it will not error any more but instead default to disable analytics.
Part of https://github.com/storj/storj/issues/5126
Change-Id: I07ac8a040664334efcb4e2536f26c330c1751a6f
Add a docker image for uplink-cli and push it to docker hub.
We used to have this before the change to uplinkng. I'm not
sure if the pushing works, we'll see after merge.
To test, build an image with `make uplink-image`, read the tag from the
output and run normal uplink-cli commands using
`docker run -it storjlabs/uplink:df9bbceca-uplink-docker-go1.18.8-amd64 [command]`
Part of https://github.com/storj/uplink/issues/109
Change-Id: I8a10aab2b778951ff42a22ba2f252c581eb66b65
We were reading in a segment's stream ID and position, and assuming that
was enough for the downloader. But of course, the downloader needs
AliasPieces filled in. So now we request each segment record from the
metabase and fill in the VerifySegment records entirely.
Change-Id: If85236388eb99a65e2cb739aa976bd49ee2b2c89
This will allow us to retry some specific segments from
segments-retry.csv with particularly high counts of "retry" pieces.
Change-Id: I48fd419cc0350a3be4c9e77ce8d28871565b7f97
This change allows for overriding project usage prices for a specific
partner so that users who sign up with that partner do not need their
invoices to be manually adjusted.
Relates to storj/storj-private#90
Change-Id: Ia54a9cc7c2f8064922bbb15861f974e5dea82d5a
* use the same DB application name for satellite and metabase
* use noop orders DB implementation to avoid storing allocated bandwidth
in DB
Change-Id: I20e88c694d38240fe1a20c45719e210cfb76402c
