WHAT:
info bars for accounts with no paywall implemented, USR-976
WHY:
we should notify users with no paywall that available coupon value is running low or coupon is used
Change-Id: I1a84afce890515b3aaedf1f0b8d359499af05471
Add a function to the overlay cache called UpdateAuditHistory, which
allows us to add online or offline audits to a particular node's audit
history, and get that node's "online score" for the configured tracking
period.
The next step will be to use UpdateAuditHistory from inside
BatchUpdateStats/UpdateStats, so that audit history is actually updated
when nodes get audited, and we can suspend nodes based on their online
score.
Change-Id: I2289105e6961e68e829a987ff756b0e576fab120
This change accomplishes multiple things:
1. Instead of having a max in flight time, which means
we effectively have a minimum bandwidth for uploads
and downloads, we keep track of what windows have
active requests happening in them.
2. We don't double check when we save the order to see if it
is too old: by then, it's too late. A malicious uplink
could just submit orders outside of the grace window and
receive all the data, but the node would just not commit
it, so the uplink gets free traffic. Because the endpoints
also check for the order being too old, this would be a
very tight race that depends on knowledge of the node system
clock, but best to not have the race exist. Instead, we piggy
back off of the in flight tracking and do the check when
we start to handle the order, and commit at the end.
3. Change the functions that send orders and list unsent
orders to accept a time at which that operation is
happening. This way, in tests, we can pretend we're
listing or sending far into the future after the windows
are available to send, rather than exposing test functions
to modify internal state about the grace period to get
the desired effect. This brings tests closer to actual
usage in production.
4. Change the calculation for if an order is allowed to be
enqueued due to the grace period to just look at the
order creation time, rather than some computation involving
the window it will be in. In this way, you can easily
answer the question of "will this order be accepted?" by
asking "is it older than X?" where X is the grace period.
5. Increases the frequency we check to send up orders to once
every 5 minutes instead of once every hour because we already
have hour-long buffering due to the windows. This decreases
the maximum latency that an order will be reported back to
the satellite by 55 minutes.
Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
On run, write the storage directory verification file.
Every time the node runs it will write the file even if it already exists.
The reason we do this is because if the verification file is missing, the SN
doesn't know whether it is an incorrect directory, or it simply hasn't written
the file yet, and we want to keep nodes running without needing operator intervention.
Once this change has been a part of the minimum version for several releases,
we will move the file creation from the run command to the setup
command. Run will only verify its existence.
Change-Id: Ib7d20e78e711c63817db0ab3036a50af0e8f49cb
Sometimes SNOs fail to properly configure or lose connection to their storage directory
which can result in DQ. This causes unnecessary repair and is unfortunate for all parties.
This change introduces the creation of a special file in the storage directory at runtime
containing the node ID. While the storage node runs, it periodically verifies that it can
find said file with the correct contents in the correct location. If not, the node will
shut down with an error message.
This change will solve the issue of nodes losing access to the storage directory, but it will not
solve the issue of nodes pointing to the wrong directory, as the identifying file is created each
time the node starts up. After this change has been the minimum version for a few releases, we will
remove the creation of the directory-identifying file from the storage node run command and add it
to the setup command.
Change-Id: Ib7b10e96ac07373219835e39239e93957e7667a4
services
This PR adds a limiter on the amount of concurrent objects deletion can be handled so
we don't run out of memory.
Change-Id: Id2ce368af6f86845fcdfd34cb2f5e460efe9b272
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.
The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.
Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
A failed test showed the same piece being deleted twice. This happens if the graceful exit completes before a previous piece deletion finishes. This change adds a "wait" on the limiter before executing the delete all step when GE is done.
Change-Id: I1c8c49d1e501c2728c80d4224a4854e742be27da
In testplanet Run function we create a new configuration variable on
each t.Run for setting the value to the config name field when it's
empty, however the new copy of the configuration was not used.
Change-Id: I9da34e743f9648850c96556eab0349e742db3aac
WHAT:
yellow low balance banner removed from billing page for no paywall users
WHY:
better user experience for no paywall users
Change-Id: I1c254d7696e166073c66a6fbb82c134903cbc920
This change will require less work for the user of peiecedeletion
service by moving overlay database call into the package.
Change-Id: I14a150ab71fe885780e7a7a74db006a779507ae5
This adds the unimplemented GetObjectIPs method to metainfo endpoint so
we can import new common protobuf definitions.
Change-Id: I154f26baccb6bb3c66de3eb25611930545c9754b
WHAT:
modal with saving API key confirmation implemented for onboarding tour
WHY:
ensure user saved API key
Change-Id: I9bc000cf5a19a9d6fc9eb3a4bfb9156d6b4bc78f
When investigating a gap in storage usage data in the SN dashboard, I noticed that there were 2 entries in the accounting_rollups table on the date of the gap.
This change accounts for multiple entries in the accounting_rollups table for a given day.
Change-Id: Ibf2b5d0455117cb0417163e8fcfb7e509d594171
It's an obsolete table from earlier state of Stripe invoices
implementation. No code is currently using it. It is confirmed that this
table is currently empty across all satellites.
Change-Id: I12d2756578faf8418ea8f3b09088e885694b8925
Small extension to test case where another partner is upload/downloading
to/from the same bucket as partner which creates this bucket.
Change-Id: Ib674fe5f95f868b71341e30aba5e2440847738f4
Use new objectdeletion package for deleting pointers.
In the best case scenario, it will make on database call to fetch
information about the number of segments. And another request to delete
and fetch information about other segments.
This PR also changes our object deletion API to return no error when an
object is not found but instead consider such operation as success. This
behavior is asligned with S3 API and makes the code less complex.
Change-Id: I280c56e8b5d815a8c4dafe8227689467e899775a
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.
Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
This change removes the overlay function FindStorageNodesForRepair,
which skips using the node selection cache and hits the database
directly. Otherwise, it is functionally identical to
FindStorageNodesForUpload, which checks the node selection cache first.
When selecting nodes for PUT_REPAIRs, we now call
FindStorageNodesForUpload instead of FindStorageNodesForRepair to reduce
database load.
Change-Id: If34e109695b2ed2b8fb6759115bf769a3459684e
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.
In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).
In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.
In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.
The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.
Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.
Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
