Query to list (with pages) stripe customers were doing full table scan
because Offset clause was used. This refactoring changed listing to
use cursor instead Offset.
Change-Id: I14688e6c533bc932ba0d209a061562f080b4cf54
Invoicing has been modified to account for an egress discount ratio,
which specifies the fraction of the amount of data stored that egress
usage should be discounted.
The egress discount ratio measures discounted egress units per storage
unit-months, so a ratio of 0.5 with 2 MB-months of storage would
discount 1 MB of egress.
Resolvesstorj/storj-private#224
Change-Id: I43d7d6719391c303712c082709aef77249c65f62
This change allows for specifying the ratio of free egress per unit
of storage within a price override configuration.
References storj/storj-private#215
References storj/storj-private#224
Change-Id: Ib1c79f77ec8bb11dd5b2f9dace13800b0b3ce942
No component has referenced this page since 9dab10e and we do not
anticipate this changing, so this page can be safely removed.
Resolves#5768
Change-Id: I57acb5e4d0977d74df46aaf67606a19ec0f10bcf
We automatically start a chore to check whether the blobstore is
writeable and readable, however, we don't want to fail the tests due to
that reason. Usually we want to test some other failure.
There probably should be some nicer way to achieve this, but this is an
easier fix.
Change-Id: I77ada75329f88d3ea52edd2022e811e337c5255a
- only applies to storjscan transactions
- applies a 10% bonus by default
- bonus transactions have a distinct source "type" to allow for
filtering on the frontend
Fixes: https://github.com/storj/storj/issues/5702
Change-Id: I32d65f776c58bcb41227ff5bc77a8e4cb62a9add
This another account endpoint; patch /auth/account/settings. to handle
changing a user's settings, including their session timeout config.
Issue: https://github.com/storj/storj/issues/5560
Change-Id: I747b4e919cf7cef7c867ac9d282837ef51bed67e
We avoid putting more than one piece of a segment on the same /24
network (or /64 for ipv6). However, it is possible for multiple pieces
of the same segment to move to the same network over time. Nodes can
change addresses, or segments could be uploaded with dev settings, etc.
We will call such pieces "clumped", as they are clumped into the same
net, and are much more likely to be lost or preserved together.
This change teaches the repair checker to recognize segments which have
clumped pieces, and put them in the repair queue. It also teaches the
repair worker to repair such segments (treating clumped pieces as
"retrievable but unhealthy"; i.e., they will be replaced on new nodes if
possible).
Refs: https://github.com/storj/storj/issues/5391
Change-Id: Iaa9e339fee8f80f4ad39895438e9f18606338908
We would like to have ability to limit burst uploads to the single
object (the same location). This change we are limiting such upload to
one per second.
Change-Id: Ib9351df1017cbc07d7fc2f846c2dbdbfcd3a360c
The blobstore implementation is entirely related to storagenode, so the
rightful place is together with the storagenode implementation.
Fixes https://github.com/storj/storj/issues/5754
Change-Id: Ie6637b0262cf37af6c3e558556c7604d9dc3613d
add ability to sort api keys on the access management page by ascending
or descending name or creation date. Additionally, edit api keys query
when ordering by name to order by lower(name) so names starting with
capital letters are not treated differently from lower case when
ordering.
Change-Id: I81dbb87587a24fb7097313f76bad116b1f20d306
With this change we are replacing parsing code with existing go-redis
util.
We also switch redis client to version 9.
Change-Id: Ie4a651e3ae6960e68958c690873925d319b70e10
The following tests should be made less flaky by this change:
- TestFailedDataRepair
- TestOfflineNodeDataRepair
- TestUnknownErrorDataRepair
- TestMissingPieceDataRepair_Succeed
- TestMissingPieceDataRepair
- TestCorruptDataRepair_Succeed
- TestCorruptDataRepair_Failed
This follows on to a change in commit 6bb64796. Nearly all tests in the
repair suite used to rely on events happening in a certain order. After
some of our performance work, those things no longer happen in that
expected order every time. This caused much flakiness.
The fix in 6bb64796 was sufficient for the tests operating directly on
an `*ECRepairer` instance, but not for the tests that make use of the
repairer by way of the repair queue and the repair worker. These tests
needed a different way to indicate the number of expected failures. This
change provides that different way.
Refs: https://github.com/storj/storj/issues/5736
Refs: https://github.com/storj/storj/issues/5718
Refs: https://github.com/storj/storj/issues/5715
Refs: https://github.com/storj/storj/issues/5609
Change-Id: Iddcf5be3a3ace7ad35fddb513ab53dd3f2f0eb0e
Components related to project usage costs have been updated to show
different estimations for each partner, and the satellite has been
updated to send the client the information it needs to do this.
Previously, project costs in the satellite frontend were estimated
using only the price model corresponding to the partner that the user
registered with. This caused users who had a project containing
differently-attributed buckets to see an incorrect price estimation.
Resolvesstorj/storj-private#186
Change-Id: I2531643bc49f24fcb2e5f87e528b552285b6ff20
This combines the ListStreamPositions and GetSegmentByPosition
calls with a ListSegments call that now knows how to return
only the segments within a Range, just like ListStreamPositions.
It would theoretically be possible to also include the
GetObjectLastCommitted call by having it do one of three
queries based on the incoming request range, but that would
mean duplicating the data for the object in every single
row that is returned for each segment in the range.
One gross thing that ListSegments has to do now is update the
first segment returned with the information from any ancestor
segment because GetSegmentByPosition used to do that. It only
updates the first segment so that it doesn't do O(N) database
queries. It seems difficult to have it do a single query to
update all of the segments at once. I'm not certain this change
should be merged on this basis alone.
This change has made me think a couple of things should happen:
1. Server side copy with ancestor segments strikes again
making the code less clear and potentially more buggy
or inefficient for a rare case (empirically <0.1%)
2. The download code requests individual segments from
the satellite lazily as part of its download which
requires the satellite telling it the locations of
all of the segments which requires the satellite
querying the locations of all of the segments. Instead
the download RPC could return the orders for all of
the segments for a range and the download code could
issue N download calls rather than 1 download call and
N get segment calls. I believe both sides of the code
paths would be simpler and more efficient this way.
3. In looking at the timing information for downloads when
testing this, we really need to focus on getting the
auth key and bandwidth limit verification times down.
Here's the timing I saw:
- 42ms: validate auth
- 52ms: bandwidth usage checking
- 14ms: get object info
- 26ms: get segment position info
- 26ms: getting the first segment full info
- 20ms: unaccounted for by spans
- 6ms: creating the orders
This change will remove 26ms, but there's a good 90ms
in just validation. With improved semantics hitting the
database only once and improved validation, a download
rpc taking ~30ms seems doable compared to our current
~200ms.
Change-Id: I4109dba082eaedb79e634c61dbf86efa93ab1222
Get bucket was returning a "bad request" HTTP status code when the
bucket doesn't exists.
We have to return HTTP "Not found" status code.
Change-Id: If717d99276b02a1e59a9b71ebc909bd6d8d9390b
Instead of granting a coupon when purchasing a package, grant credit.
This changes paymentsconfig.PackagePlan to use credit amount rather than
coupon ID. Add additional check to see if a paid invoice with the
description exists. If so, don't create and pay another invoice.
Change-Id: I81df24984c519c773db5fc8e9070bd7797070ec2
Add and implement interface to manage customer balances. Adds ability to
add credit to a user's balance, list balance transactions, and get the
balance.
Change-Id: I7fd65d07868bb2b7489d1141a5e9049514d6984e
Invoicing-related payment service methods have been modified to send
Stripe API requests in parallel.
Additionally, randomness has been added to the Stripe backend wrapper's
exponential backoff strategy in order to reduce the effects of the
thundering herd problem, which arises when executing many simultaneous
API calls.
Resolves#5156
Change-Id: I568f933284f4229ef41c155377ca0cc33f0eb5a4
Add columns package_plan and purchased_package_at to stripe_customers
table and add methods to update and select these values from console
service and payments accounts.
Change-Id: I1e89909055cc3054bfb7baa33c9dca3dfdc7336e
Implementing https://github.com/storj/storj/issues/5702 means adding a
bonus billing transaction for each storjscan transaction being recorded.
To do this idempotently, we need to the ability to for both the
storjscan and bonus transaction to be committed together.
This change updates the billing database to allow multiple billing
transactions to be inserted under the same database transaction.
Change-Id: I941864f47fc64d65aab076eec2e96fd04fcc7aac
A row in the new `user_settings` table does not always exist for a user,
even if they have been around for a while.
Since `user_settings` is now what defines the state of a user's
onboarding flow, prior to this fix, even old users would receive the
onboarding flow again.
This change appropriately updates `user_settings` for users who already
have projects, and thus have already gone through the onboarding flow. A
brand new user will still be navigated to the beginning of onboarding.
Change-Id: Ie745d280f6b8094ec60c200c2dca8d018d51f7d1
FileWalker implements methods to walk over pieces in
in a storage directory.
This is just a refactor to separate filewalker functions
from pieces.Store. This is needed to simplify the work
to create a separate filewalker subprocess and reduce the
number of config flags passed to the subprocess.
You might want to check https://review.dev.storj.io/c/storj/storj/+/9773
Change-Id: I4e9567024e54fc7c0bb21a7c27182ef745839fff
By accident query to get latest table stats was ordered by 'row_count'
column instead 'create'. We need latest stats so we need ordering by
creation time.
Change-Id: I9d0a0edda8bab59c3d96b7a15cd6502ed51633fc
This flag was in general one time switch to enable versions internally.
New we can remove it as it makes code more complex.
Change-Id: I740b6e8fae80d5fac51d9425793b02678357490e
We want to eliminate usages of LoopSegmentEntry.Pieces, because it is
costing a lot of cpu time to look up node IDs with every piece of every
segment we read.
In this change, we are eliminating use of LoopSegmentEntry.Pieces in the
node tally observer (both the ranged loop and segments loop variants).
It is not necessary to have a fully resolved nodeID until it is time to
store totals in the database. We can use NodeAliases as the map key
instead, and resolve NodeIDs just before storing totals.
Refs: https://github.com/storj/storj/issues/5622
Change-Id: Iec12aa393072436d7c22cc5a4ae1b63966cbcc18
The default price threshold has been changed to 10000 cents. The help
text has also been modified to clarify that this value is in cents.
Change-Id: I3b605056c860a3afef7202950180bc8b863fe16a
A debug log has been added to the autofreeze chore to show numbers of
invoices, users involved, users frozen, users warned and users bypassed
due to larger than config amount owed.
Issue: https://github.com/storj/storj/issues/5700
Change-Id: I4e628606fe234b6d239b76167a4781ca9e276308
This handles cases where a user is warned and triggers payment for their
account. Previously, only a frozen account will trigger this payment,
and will be unfrozen on successful payment. Now, accounts in warning
state trigger payments and are removed from that state on successful payment.
Issue: https://github.com/storj/storj/issues/5691
Change-Id: Icc2107f5d256657d176d8b0dd0a43a470eb01277
Previously, our code produced a Go panic when attempting to index an
empty slice of bucket user agent entries. A length check has been
added to ensure that the slice is not accessed beyond its bounds.
Change-Id: I904ca275b934be1b05393a45d99ff415dcafc926
This change adds an endpoint that gets a user's settings. It will
create a new settings entry if no settings exists. There's also a new
endpoint to change a user's onboarding status.
Issue: https://github.com/storj/storj/issues/5661
Change-Id: I9941bb9d61994af46244003f3ef4fcfe7d36918e
This change adds onboarding_start, onboarding_end and onboarding_step
columns to the user_settings table. the first two are used to determine
if a user should go through onboarding, the last will be used to as the
step a user got to before exiting onboarding without finishing.
Issue: https://github.com/storj/storj/issues/5660
Change-Id: I8070c880d0d2fc22086f24087c962f57c695cc50
A Stripe backend implementation has been added that uses an exponential
backoff strategy to retry failed API calls. This behavior can be
configured in the satellite config.
References #5156
Change-Id: I16ff21a39775ea331c442457f976be0c95a7b695
We have a specific issue that a user uploaded a file to a bucket
geo-fenced to EU and one of the pieces appeared to be on a node in the
US. The country code of this node is set to SE (Sweden) in the satellite
DB. It turns out that some time ago MaxMind changed the country code of
this node's IP from Sweden to US, but this change hasn't been reflected
in the satellite's database.
So far the satellite updates the country code of a node only if its IP
changes. It was assumed that if the IP does not change, its country code
shouldn't change too. This turned to be a wrong assumption.
With this change, the satellite will look up the MaxMindDB on every
check-in to see if the country code of the node's IP has changed.
Change-Id: Icdf659b09be9fc6ad14601902032b35ba5ea78c4
Add a combined index on normalized_email,status to improve performance of
common "get user" query used for the satellite UI.
Change-Id: I24a20d7826e0a68a68c2f95b5847eb819921e7c0
This commit ensures that all invocations of Stripe library methods
include a context. This allows us to control the timeout and
cancellation of the underlying HTTP requests made by the Stripe
library.
References #5156
Change-Id: I8ddb317f3f2cbb06cfab869fbebdaf2ad78b7999
Metainfo needs to know rate and burst limit to be able to limit users
requests. We made cache for per project limiter but to make single
instance we need to know about limits. So far we were doing direct DB
call to get rate/burst limit for project but it's generating lots of
DB requests and can be easily cached as we even have project limit cache.
This change extends project limit cache with rate/burst limit and starts
using this change while creating project limiter instance for metainfo.
Because data size kept in project limit cache is quite small this change
also bumps a bit default capacity of the cache.
Fixes https://github.com/storj/storj/issues/5663
Change-Id: Icb42ec1632bfa0c9f74857b559083dcbd054d071
We just fixed case were project limit cache was not used properly. This
is test case to cover that fix.
Change-Id: Iee467f0a46836860a14ab6238a9842ffbf54ed4c
This might be pretty awful, but at least it is a complete and non-flaky
solution.
**Only when using the rollingupgrade test** (which implies a throwaway
satellite and also a PostgreSQL backend), create a trigger on the nodes
table which forces last_net to be equal to last_ip_port always.
Change-Id: I8448cf131e46576d96a414d06780270c7b2b1892
Currently, to get number of entries in segments table we are doing
heavy SELECT count(*) operation. For biggest satellite it's taking
25min now. We are using this method to get stat before and after
segments loop so it adds almost 1h to overall loop time.
With current version of crdb we are using this additional code won't be
used because global configuration for stats refresh rate is inaccurate
for such large table like `segments`. Soon we should be able to upgrade
crdb and be able to adjust refresh rate per table and configure it to
satisfy defined threshold.
https://github.com/storj/storj/issues/5544
Change-Id: I05cfd9154f08894d2bc56bf716b436d1b03b87f1
A field has been added to the coupon struct indicating whether it is
associated with a partner's pricing package. This is required to
alter the appearance of partner coupons in the satellite frontend.
References storj/storj-private#172
Change-Id: Ie48ae3902aaa108abf9a399242a0cd98cb53d1c3
This change sends an event to segment for when a user is unfrozen.
It also moves freeze and warning event triggers from the autofreeze
chore to the account freeze service.
Change-Id: I5c0522b921b7baf52d6db5eb7ef841c08644a461
This change reworks the allowedAuthorization function to check what
groups the user is a part of to determine if authorization should be
granted. By wrapping each handler with withAuth, we can specify the
allowed groups for each api method individually.
github issue: https://github.com/storj/storj/issues/5565
Change-Id: I1804dda04d5b16d19e93bd7199fb3fc89fca1294
Remove generate-missing-project-salt migration tool code and related
tests. This migration has already been run and this code is no longer
needed.
Issue https://github.com/storj/storj-private/issues/163
Change-Id: I4e36dcd95a07c5305c597113a7fd08148e100ccc
It looks that at some point we broke how project limits cache is used
and we were missing cache in most critical paths (upload/download).
This is fix for this issue.
I also adjusted cache methods naming.
Change-Id: Ic98372779a39365d0920fe3943f1f7a68b064173
This change adds a card to the billing overview page, which shows the
user's token balance from coinpayments.
Issue: https://github.com/storj/storj-private/issues/151
Change-Id: I11e295b48791b32b745cb7a11c5b4aad6b56618e
This test involves a satellite with dev defaults (DistinctIP=no) being
upgraded past commit 2522ff09b6, which
means we need to run the dev-defaults-satellite-upgrade migration SQL
to avoid getting DistinctIP=yes behavior (which breaks the tests).
Change-Id: I29fb596d1ffa568dad635d98cfe9abacd3aaa48f
Only API peer needs access to order DB (and rollups cache) because it's
only place where we are creating orders for PUT and GET operations. For
other peers like auditor and repairer we can set noop implementation to
reduce number of dependencies needed for them.
Change-Id: Ic32d1879f0b97ffc4516f401898e31e95ae892e4
It was surprising that `satellite auditor` complained about SMTP mail settings, even if it's not supposed to sending any mail.
Looks like we can remove the mail service dependency, as it's not a hard requirement for overlay.Service.
Change-Id: I29a52eeff3f967ddb2d74a09458dc0ee2f051bd7
I tried to configure a satellite service and got this error:
```
DEBUG process/exec_conf.go:408 Unrecoverable error {"error": "missing port in address"}
```
It took some time to realize that I forgot to set the SMTPServerAddress.
This patch makes it easier to detect similar problem (detailed error message), and makes SMTP parameters optional if no real mail sending is used (simulated or nomail)
Change-Id: I32535a7c8d6529e19e4d919806f42ba430d074a5
Up to now, we have been implementing the DistinctIP preference with code
in two places:
1. On check-in, the last_net is determined by taking the /24 or /64
(in ResolveIPAndNetwork()) and we store it with the node record.
2. On node selection, a preference parameter defines whether to return
results that are distinct on last_net.
It can be observed that we have never yet had the need to switch from
DistinctIP to !DistinctIP, or from !DistinctIP to DistinctIP, on the
same satellite, and we will probably never need to do so in an automated
way. It can also be observed that this arrangement makes tests more
complicated, because we often have to arrange for test nodes to have IP
addresses in different /24 networks (a particular pain on macOS).
Those two considerations, plus some pending work on the repair framework
that will make repair take last_net into consideration, motivate this
change.
With this change, in the #2 place, we will _always_ return results that
are distinct on last_net. We implement the DistinctIP preference, then,
by making the #1 place (ResolveIPAndNetwork()) more flexible. When
DistinctIP is enabled, last_net will be calculated as it was before. But
when DistinctIP is _off_, last_net can be the same as address (IP and
port). That will effectively implement !DistinctIP because every
record will have a distinct last_net already.
As a side effect, this flexibility will allow us to change the rules
about last_net construction arbitrarily. We can do tests where last_net
is set to the source IP, or to a /30 prefix, or a /16 prefix, etc., and
be able to exercise the production logic without requiring a virtual
network bridge.
This change should be safe to make without any migration code, because
all known production satellite deployments use DistinctIP, and the
associated last_net values will not change for them. They will only
change for satellites with !DistinctIP, which are mostly test
deployments that can be recreated trivially. For those satellites which
are both permanent and !DistinctIP, node selection will suddenly start
acting as though DistinctIP is enabled, until the operator runs a single
SQL update "UPDATE nodes SET last_net = last_ip_port". That can be done
either before or after deploying software with this change.
I also assert that this will not hurt performance for production
deployments. It's true that adding the distinct requirement to node
selection makes things a little slower, but the distinct requirement is
already present for all production deployments, and they will see no
change.
Refs: https://github.com/storj/storj/issues/5391
Change-Id: I0e7e92498c3da768df5b4d5fb213dcd2d4862924
Segments loop have build-in sanity check to verify if number of segments
processed by loop is roughly fine. We want to have the same verification
for ranged loop.
https://github.com/storj/storj/issues/5544
Change-Id: Ia19edc0fb4aa8dc45993498a8e6a4eb5928485e9
If the session_minutes column in user_settings is not null, use this
value to determine the expiration when creating or refreshing a session.
github issue: https://github.com/storj/storj/issues/5487
Change-Id: I1f777f7ffcd4018b0c40f0b26c8a50de85a31909
We should return public project id instead of regular one when quering project charges so that it is consistent on a client side.
This is a fix for an issue with displaying project name on a Billing screen.
Issue:
https://github.com/storj/storj/issues/5641
Change-Id: Ic0c544dbe7369aa88f3a7c97a2f5de5bc854e1fd
We changed primary key for bucket_bandwidth_rollups table. Now we
need to do some cleanup in places like structs, sorting methods or SQL
queries.
Change-Id: Ida4f874f161356df193379a53507602e04db1668
The tests were using global variables for keeping the mock state, which
was indexed by the satellite ID. However, the satellite ID-s are
deterministic and it's possible for two tests end up using the same
mocks.
Instead make the mock creation not depend on the satellite ID and
instead require it being configured via paymentsconfig.
This fixes TestAutoFreezeChore failure.
Change-Id: I531d3550a934fbb36cff2973be96fd43b7edc44a
In the past we set incorrect primary key for bucket_bandwidth_rollups
table and bucket name was first column of key instead of project id.
This change fixes this problem.
We will alter primary key manually for production satellites. That's
why migration code is checking if change was already applied.
https://github.com/storj/storj/issues/5332
Change-Id: I7dd555eb0c2f6fda1c90eaed08fa847b7f273bc7
An endpoint has been added that returns whether a pricing package is
available for a user to purchase. This will be used to conditionally
skip the pricing plan selection step of the onboarding tour.
Change-Id: I8c02a4e474e5f0f80778453b7daf674c8da64306
If a user changes password while a password recovery token exists,
delete the token so the reset password email doesn't work.
github issue: https://github.com/storj/storj-private/issues/149
Change-Id: Ibb0c13076e182c46501c1d7ac92d3fecc7d5ee58
Add passphrase_prompt column to user_settings table to store a boolean
whether a user would like to be prompted to enter a passphrase when
entering a new project.
Issue https://github.com/storj/storj/issues/5613
Change-Id: I5d086df277aff458453343c7c38a379e7b1b8bf9
Earlier we made a change to not cancel flushing orders when flushing
was triggered by orders endpoint method but we missed a case
where it can be also triggered (and canceled) by metainfo endpoints
method. This change moves ignoring context cancellation deeper.
Change-Id: Id43176f552efc3167345783f73aab885411ac247
This change adds a new chore that will check for failed invoices and
potentially freeze corresponding accounts.
It makes slight modifications to stripemock.go and invoices.go (adding
stripe CustomerID to the Invoice struct).
Issue: https://github.com/storj/storj-private/issues/140
Change-Id: I161f4037881222003bd231559c75f43360509894
A pricing plan selection step for users with a recognized partner has
been added to the beginning of the onboarding tour. Once visited, users
have the option of purchasing the pricing plan associated with their
partner or proceeding as a paid or free tier user.
Resolves storj-private#118
Resolves storj-private#126
Change-Id: I3b423194d96deaf87cf9807a766bf4d04fbcf86d
add new config to the satellite admin: --admin.groups.limit-update.
This can be used as an alternate means of authentication if the request
is coming from the oauth proxy.
Change-Id: Ic2de13862e6414244b060c66a0f2bed72097cbad
Commit fb59974 disabled usage price overrides because of a failing
test. This change reenables it while resolving the issue that caused
the test to fail.
The previous version of the test passed Gerrit verification and was
merged, but it failed for the primary Jenkins pipeline after merge.
This is due to a difference in how the Jenkins build runs Cockroach
and Postgres for each pipeline.
This commit rewrites the test to be safe for concurrent execution by
ensuring any mutable variables are defined within each test so that
shared state across tests is reduced.
Change-Id: Ia4566c9cd2d698afdb2caa4b7e2808b17e18de4e
It was possible to get into a situation where successfulPieces =
es.RequiredCount(), errorCount < minFailures, and inProgress == 0 (when
the succeeding gets all completed before the failures), whereupon the
last goroutine in the limiter would sit and wait forever for another
goroutine to finish.
This change corrects the handling of that situation.
As an aside, this is really pretty confusing code and we should think
about redoing the whole function.
Change-Id: Ifa3d3ad92bc755e563fd06b2aa01ef6147075a69
Also, fix nodevents iota usage. Type is directly used in the database
hence we should avoid iota, because it's easy to mess-up the constant
values.
Change-Id: I32bf6d0502fbf3d18660dab5b1dd0b5627b444df
Add new purchase-package endpoint to Server. The endpoint can be enabled
or disabled by a new config, --console.pricing-packages-enabled.
The purchase-package endpoint applies a coupon and adds and charges a
credit card if user's useragent is a partner with a configured package
plan.
github issue: https://github.com/storj/storj-private/issues/125
Change-Id: I0d6ccccd6874ddba360c45f338fd1c44f95e135a
Project usage price overriding has been removed because it produces
incorrect results when tested. It should not be re-implemented until
the issues it causes are resolved.
Change-Id: Ic92eff374c9af4fea3bf32782a72303a7978b055
The update user API function was defining a parameter that the API
calling function doesn't receive, so all the values were shifted by
1 after this extra parameter and the calling function was sending these
values to the next one updating the fields that the user was not
expecting.
The API server doesn't allow to update this removed parameter, so it
was likely a bug caused by copy-pasta.
Change-Id: I52a2b66abc1f6e5cb0070dc6fd230c30d1133dcf
A new struct containing configuration values for the satellite frontend
is populated and served to the client. In the future, this struct will
be used to configure the frontend rather than using Go templates and
meta tags to do so.
References #5494
Change-Id: Ie2c8a140d53b20fab159d34f2e3767e5dbd43bdb
This code is essentially replacement for eestream.CalcPieceSize. To call
eestream.CalcPieceSize we need eestream.RedundancyStrategy which is not
trivial to get as it requires infectious.FEC. For example infectious.FEC
creation is visible on GE loop observer CPU profile because we were
doing this for each segment in DB.
New method was added to storj.Redundancy and here we are just wiring it
with metabase Segment.
BenchmarkSegmentPieceSize
BenchmarkSegmentPieceSize/eestream.CalcPieceSize
BenchmarkSegmentPieceSize/eestream.CalcPieceSize-8 5822 189189 ns/op 9776 B/op 8 allocs/op
BenchmarkSegmentPieceSize/segment.PieceSize
BenchmarkSegmentPieceSize/segment.PieceSize-8 94721329 11.49 ns/op 0 B/op 0 allocs/op
Change-Id: I5a8b4237aedd1424c54ed0af448061a236b00295
Purchase collects a payment from user using the specified price,
description, and payment method. This is implemented at the lower layers
using the payments.Invoices interface. There are also additions to
stripecoinpayments stripemock to simulate errors returned from stripe
invoices New and Pay. If an invoice exists with the same description, if
it is a draft, it is deleted and a new one is created and paid. If it is
open, pay it and don't create a new one.
Change-Id: Ic3147434bc44a0777ecbedb3a4ed4c768eb02ea3
This change removes the trailing slash from the account activation and
password recovery URLs, making them consistent with the rest. The URLs'
previous forms are still supported, however, in order to not invalidate
emails containing them.
Resolvesstorj/customer-issues#491
Change-Id: Ie774a87698d8e9edd1836611968fc3911c6cc56f
If a node is already disqualified or exited, don't bother going through
the audit reputation code. If there's an additional reputation update to
be made based on the automatic offline audit these nodes would get, the
overlay DB rejects it anyway.
Change-Id: I48ba151aa640b32f87e1285521be465d1f692a78
This is first attempt to use AliasPieces inastead Pieces with
segments/range loop. So far we were always using Pieces
which are always converted from AliasPieces for easy use.
Side effect is that using NodeID with loop observers is heavy
e.g. we are using maps which behaves slower with NodeIDs.
We are starting with audit observer because it's easy to change
it as in feact it doesn't need access to real NodeID at all. We just
need to reference node in some way and this way is NodeAlias.
Results of BenchmarkRemoteSegment:
name old time/op new time/op delta
RemoteSegment/Cockroach/multiple_segments-8 1.79µs ± 6% 0.03µs ± 4% -98.29% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/multiple_segments-8 0.00B 0.00B ~ (all equal)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/multiple_segments-8 0.00 0.00 ~ (all equal)
Change-Id: Ib7fc87e568a4d3a9af27b5e3b644ea68ab6db7aa
Additional elements added:
* monkit metric for observers methods like Start/Fork/Join/Finish to
be able to check how much time those methods are taking
* few more logs e.g. entries with processed range
* segmentsProcessed metric to be able to check loop progress
Change-Id: I65dd51f7f5c4bdbb4014fbf04e5b6b10bdb035ec
Add notifications for free account limits for segment usage
and update to follow the figma designs.
Issue: https://github.com/storj/storj/issues/5482
Change-Id: I8a2fe38d609d53e09bf5074484cedc343223bffd
stripecoinpayments.mockStripeClient implements the
stripecoinpayments.StripeClient interface which is used to interact with
stripe's APIs in production. We use it in tests to simulate API calls to
stripe. This change introduces new stripecoinpayments package level
constants: TestPaymentMethodsNewFailure and
TestPaymentMethodsAttachFailure. These can be passed as part of the
arguments their respective stripe mock methods to signal to the method
that it should return an error. This is useful so that we can test how
layers on top of the StripeClient interface handle errors.
Change-Id: Ib64c08ba1e91f31e755b66a1ad563c3b6e77f6f0
Add new console service payments methods ApplyCoupon and
ApplyFreeTierCoupon. ApplyCoupon applies a coupon to an account based on
the coupon ID passed to it. ApplyFreeTierCoupon applies the satellite
configured free tier coupon to the account.
Change-Id: Ic221092278553a79207ac2a0c9229c374d76c881
Several tests using `(*ECRepairer).Get()` have begun to exhibit flaky
results. The tests are expecting to see failures in certain cases, but
the failures are not present. It appears that the cause of this is that,
sometimes, the fastest good nodes are able to satisfy the repairer
(providing RequiredCount pieces) before the repairer is able to identify
the problem scenario we have laid out.
In this commit, we add an argument to `(*ECRepairer).Get()` which
specifies how many failure results are expected. In normal/production
conditions, this parameter will be 0, meaning Get need not wait for
any errors and should only report those that arrived while waiting for
RequiredCount pieces (the existing behavior). But in these tests, we can
request that Get() wait for enough results to see the errors we are
expecting.
Refs: https://github.com/storj/storj/issues/5593
Change-Id: I2920edb6b5a344491786aab794d1be6372c07cf8
We are supposed to wait for some amount of time after a timed-out audit
before retrying the audit on the contained node. We are also supposed to
wait for some amount of time before subsequent retries, if they are
necessary. The test added here tries to assure that those delays happen,
as far as it is possible to assure that a delay will happen in computer
code.
The previous behavior of the system was, in fact, to carry out
Reverifies as soon as a worker could retrieve the job from the
reverification queue. That's not a very major problem, as subsequent
retries do have a delay and the node does get several retries. Still, it
was not ideal, and this test exposed that mismatch with expectations, so
this commit includes a minor change to effect that pause between verify
and the first reverify.
Refs: https://github.com/storj/storj/issues/5499
Change-Id: I83bb79c166a458ba59a2db2d17c85eca43ca90f0
While working on fixing listing for committed objects we didn't fix
the same case for pending objects. For case were we have many
pending objects under different locations we need to set cursor
version to highest value to avoid duplicates.
For case where we have many pending objects under the same location
we will need to make a separate fix.
https://github.com/storj/storj/issues/5570
Change-Id: Id5c8eb728868e8e1177fdbcf65a493142be4eaf0
Adds a feature flag for the new all projects dashboard. It defaults to false.
Issue: https://github.com/storj/storj/issues/5514
Change-Id: I160904eccae7d30e05b734e69600725702b16aca
Create an endpoint in the Admin Api to be able to update a user’s limits
for all existing and new projects. Also added a GET endpoint to return
user's limits.
Fixes: https://github.com/storj/storj/issues/5395
Change-Id: I2c093dc08ebf79a4318391e63a37da4d2b403547
We have an issue where object can appear in two different listing pages.
It's because protobuf listing cursor doesn't have version included and
now we can have internally versions higher than 1. On satellite side
version 1 was always used as a default cursor version.
As a workaround for existing implementation of libuplink library we will
use always maximum version for listing cursor on satellite side.
Fixing protobuf and libuplink implementation will happen later.
https://github.com/storj/storj/issues/5570
Change-Id: Ibd27b174556c9d8b8bd60fab8cff7862fd11e994
This change adds support for project public id to the bucket-names and
usage-report endpoints.
Issue: https://github.com/storj/storj/issues/5578
Change-Id: I2429ebebe52dfc8217fc40f4691e7bc473b805fb
Peer for generating bloom filters will be able to use ranged loop.
As an addition some cleanup were made:
* remove unused parts of GC BF peer (identity, version control)
* added missing Close method for ranged loop service
* some additional tests added
https://github.com/storj/storj/issues/5545
Change-Id: I9a3d85f5fffd2ebc7f2bf7ed024220117ab2be29
This modification introduce support of the new "desired node" field of download segment/object.
This can be used to request more nodes than the suggested minimum. It can be used to achieve better performance in exchange of using more bandwidth. (more parallel downloads).
Change-Id: Ia167d6979e6d70a597c85070a4ccd1c3a573e406
Most of our (~integration) tests based on testplanet runner.
However running testplanet for each test make the testing process slow.
It seems to be better to use real unit tests (without db dependency) when it's possible.
This patch makes small modification to make it possible to test orders.Service with real unit test.
As the existing unit test of `service.go` is isolated with `_test` package name, it's moved to an `_integration_test.go` file to make place for the unit test.
Change-Id: Ia69f26a34e2c48d230d8d36c2040dd02a60455a6
This commit introduces tests that perform multiple concurrent audits
against the same storage node, to make sure that doing so does not
create incorrect outcomes.
Refs: https://github.com/storj/storj/issues/5495
Change-Id: Iaae49e042306bfa59bdf04c1a1540667488e51e5
TestLoopContinuesAfterObserverError was failing due to system
granularity measuring the duration as 0.
TestDialer_DialTimeout was failing due to connection failure came with a
delay and wasn't being handled.
Change-Id: I4638c86f5d021a86c3d3529fab13cf3608f35c40
ListUploads returns incorrect UploadID if Expires was set in
BeginUpload. DB is truncating expiration date to microseconds precision
so we need to do this also in code.
Change-Id: Iee0cf45cb705342f6bb9a2f745acca91cce6ff52
Orders from storage nodes are received by SettlementWithWindowFinal method. There is a stream which receives all orders and after getting
all orders we are inserting into DB storagenode and bucket bandwidth. Problem is with bucket bandwidth which is stored through cache which is often using context from SettlementWithWindowFinal stream to perform DB inserts and its doing this in separate goroutine. Because of that is possible that SettlementWithWindowFinal is finished before flushing was finished and context is canceled while doing insert into DB
Change-Id: I3a72c86390e9aedc060f6b082bb059f1406231ee
The banners on the web satellite previously hovered over the page
and overlapped other content as a result. This change moves them
into the page content so it overlaps nothing and is scrollable off-screen
This change also makes the upgrade banner only show on the dashboard and
only if the user joined more than seven days ago.
Issue: https://github.com/storj/storj/issues/5525
Change-Id: I7278c31201f09d3515d907b833622b04c6de8557
This change adds a database migration for a new table that stores
configurations for a user, the first of which is the session duration.
Database methods are implemented to interact with this table.
Resolves#5472
Change-Id: I01049265f385ea5de65907da1bc3bcf426d3c577
this change uses the new storj/common noise helpers, which:
* add a security fix (require an expected node id for validating
noise key attestations)
* stops doing an unnecessary order signature validation (it's
already been done inside of PutPiece)
* removes some duplicate code
Change-Id: I5e67a08ff216cd9c5b0b82e40b4d9de664b6b0fc
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds the actual chore.
Refs: https://github.com/storj/storj/issues/5431
Change-Id: Id78b40bf69fae1ac39010e3b553315db8a1472bd
Previously we were exposing the testing facilities via interface casting
the necessary parts, however, when things are not part of the main
satellite.DB interface they need to be manually propagated. Rather than
relying on using hidden methods lets expose things as long as they don't
create a direct dependency to the database driver.
Change-Id: I2eb7d8b60f4b64de1320c2d32581f7be267c0f57
This updates project related graphql mutations and queries to support
project publicId while maintaining support for project ID. The frontend
is updated to use only publicId when using these mutations/queries.
Issues:
https://github.com/storj/storj/issues/5409https://github.com/storj/storj/issues/5413
Change-Id: Ib6241db157de3b37c86a4a98c9f682bf4a047b62
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds a method to the overlay allowing the caller to set the
contained status of all nodes in the nodes table at once. This is valid
because our definition of "contained" now depends solely on whether a
node appears at least once in the reverification queue. Only rows whose
contained field does not match the expectation will be updated; the
contained timestamp will not be updated for a node which is supposed to
be contained and was already contained.
Change-Id: I8cabe56ad897b6027e11aa5b17175295391aa3ac
This change modifies "reputation change trigger" logic for dq and
suspension in order to:
* count only nil -> not-nil and not-nil -> nil as "reputation changes"
* do not count the timestamp updating (not-nil -> not-nil) as a
reputation change
Change-Id: Ie57c97e80e5f3b368e2f2dc004e680a2f9416d1c
Users with a partner package plan should be unable to replace their
plan's coupon. This change enforces this behavior by rejecting coupon
application attempts from users that meet this criteria.
Change-Id: I6383d19f2c7fbd9e1a2826473b2f867ea8a8ea3e
This bumps common, such that things build with Go 1.20.
Also, adds `go vet` checks for testsuite/storjscan and testsuite/ui.
The latest golang.org/x/bcrypt has a check that the new password is less
than 72 bytes, because bcrypt silently discarded them. This means our
own password validation has the same limitation. Old passwords should
still work fine.
Change-Id: Ibb8735b15eeb91460145906b81ae4e365e9ac418
Testplanet tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because
currently we have multiple queries which are doing full table scan and it's not trivial to change.
https://github.com/storj/storj/issues/5471
Change-Id: Ia2fcbfb9102424d58f95e00071329454a8c1066e
While splitting GC into two parts, bloom filter generation and bloom
filter sending, we missed to remove segments loop dependency from boom
filter sending part.
Change-Id: I48f213b0c0f8583e24fbb2bdcbfced518abe74cb
To improve deletion of old entries in project_bandwidth_daily_rollup
we need index on `interval_day` column which is used to find those old
entries.
As an addition we are changing interval how often deletion is executed
from 7 to 1 day. We would like to have smaller portion of data to
delete.
Fixes https://github.com/storj/storj/issues/5465
Change-Id: Ie18ebe859887b93d6e4e6065a61fb9214c7ad27a
we have two more fields in the database (noise_proto and
noise_public_key) that now need to go into pb.NodeAddress when
returning AddressedOrderLimits.
the only real complication is making sure type conversions between
database types and NodeURLs and so on don't lose this new
pb.NodeAddress field (NoiseInfo). otherwise this is a relatively
straightforward commit
Change-Id: I45b59d7b2d3ae21c2e6eb95497f07cd388d454b3
add descriptions for freeze and unfreeze user endpoints and regenerate
table of contents. This additionally added the oauth endpoints and one project limits POST parameter to the ToC
Change-Id: I05025f1f3a11c3775a4f59b01569ccb419d72858
Satellite DB tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because currently
we have multiple queries which are doing full table scan and it's not
trivial to change.
We may change that behavior when we will figure out how to skip
specific query from detection or we will fix all problematic queries.
https://github.com/storj/storj/issues/5471
Change-Id: Icafe782257a0d353e8bcdf6fa8a19c20b1091a0b
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds a method to the class representing the reverify queue
in the database, allowing us to get the list of every node that has at
least one record in the reverification queue.
Refs: https://github.com/storj/storj/issues/5431
Change-Id: Idce2633b3d63f2645170365e5cdeb2ea749fa9cb
This change causes the bucket's partner info to be used rather than the
user's when calculating project usage prices. This ensures that users
who own differently-partnered buckets will be charged correctly for
usage based on the specific bucket they are utilizing.
according to the bucket's partner.
Related to storj/storj-private#90
Change-Id: Ieeedfcc5451e254216918dcc9f096758be6a8961
The CASE expression used to determine which value to set
last_software_update_email to did not have an ELSE clause. Therefore,
when the node is both below the minimum version and did not receive a
version update email (no condition is true), the value would be set to
NULL.
Additionally, replace `time.Now()` with `timestamp` in the check to
determine if the email cooldown has passed.
Change-Id: I2e2e93f1a865e123ed8b665be9621cebfb72236f
Emails should not contain user input that could be used by malicious
agents to deliver a message. Usernames have been removed from
account activation emails, and project names have been removed from
project invitation emails.
References storj-private#133
Change-Id: Ic05921149b409145df109c0966ea5dfd86d86eb1
For bucket_bandwidth_rollups we are trying to insert lots of entries
with empty bucket name and project id. Those are inserts from orders
created by repair, audit and GE. High load on the same primary key
(the same range) is causing many retries and that's affect all inserts
as we are putting 1000 entries into DB a once.
This change solves this problem by not storing into
bucket_bandwidth_rollups other actions then GET and PUT. Those actions
are only important from bucket bandwidth usage perspective because
those are actions performed by users. Other actions (repair, audit or
GE) are also stored in storagenode_bandwdith_rollups so we will still
have access to them e.g. for statistic purposes.
https://github.com/storj/storj/issues/5332
Change-Id: Ibb5bf0a4c869b0439dc65da1c9342a38ca2890ba
Sorting by primary key before inserting data into DB is fixed.
Earlier we were sorting input slice of BucketBandwidthRollup but then
we were putting all entries into map to rollup input data. Iteration
over map with a range loop doesn't guarantee any specific order so we
were loosing sorted order when we were creating with this map slices to
use with DB insert.
New code is also using map but when map is full its sorting map keys
separately and iterates over them to get data from map.
https://github.com/storj/storj/issues/5332
Change-Id: I5bf09489b0eecb6858bf854ab387b660124bf53f
`overlay.(*Service).UpdateReputation()` takes a "reputationChanges"
parameter, a slice of node events indicating whether we think the node's
disqualification or suspension status is changing. This is necessary so
that the overlay service can notify the nodeevents DB about these
changes.
In several cases, however, this list of events is not constructed
correctly, because of missing information about the previous state.
In most cases, this is because the node was offline, and the order limit
creation functions (which usually obtain and return the prior reputation
status) ignored that node.
This change makes it so that all callers to
`overlay.(*Service).UpdateReputation()` can be expected to provide a
correct list of change events (as correct as feasible, given that we
can't lock the node's information in the database during the entire
operation).
It ended up that there was only one caller we needed to worry about, and
that was reputation.(*Service).ApplyAudit(). So the bulk of this change
is teaching that function how to recognize when the prior reputation
status was not filled in, and fill it in.
Refs: https://github.com/storj/storj/issues/5464
Change-Id: I52ce385fc9c0ce3b283b998d517998e7f4ec8792
Affected packages admin,attribution,console,metainfo,satellitedb,web,payments
This change removes the satellite/rewards package and its related usages.
It removes references to APIKeyInfo/PartnerID, Project/PartnerID
and User/PartnerID.
Issue: https://github.com/storj/storj/issues/5432
Change-Id: Ieaa352ee848db45e94f85556febdbcf1444d8c3e
Add migration tool (and test) to update salt column in projects table
with the SHA-256 hash of the project ID when null
Issue https://github.com/storj/storj-private/issues/66
Change-Id: Ib8d484ac8d6ee25859064d803e2ac8fb46b45921
Our DB support in storj/private was updated to enable basic context
support for executing SQL queries. This change requires some small
adjustments as not all parts were working correctly.
storj/private commit with change:
4bc77107b7acfcc2f7ad65796d5dd3d7c64801e4
Change-Id: I64d7ed92788ea0920d12cecd1aa0e414720e9b9c
When running pay invoices command skip invoices that has due date set, so
customers can still pay it themselves until due date.
https://github.com/storj/storj/issues/5453
Change-Id: I8e557062491ab0c8246b28bc5ca57e845eb32e29
This is automated test around metabase tests. It's detecting queries
which were performing full table scan during test execution.
After merging this and checking that this is not problematic in any way
we will enable this also for testplanet tests.
One query was adjusted to avoid full table scan and pass new check.
https://github.com/storj/storj/issues/5471
Change-Id: I2d176f0c25deda801e8a731b75954f83d18cc1ce
When there is no wallet in the database for a particular customer
return 404 http response status code instread of internal server error.
Change web/satellite payments API to return empty wallet on 404 response
code instead of throwing an error.
Change-Id: Ib44914f9ed002382258968fb81846f2b97dee0fe
implemented observer and partial, created new structures to keep mon
metrics remain in same way as in segment loop
Change-Id: I209c126096c84b94d4717332e56238266f6cd004
When we have problem with inserting bandwidth amounts into cache
or DB we are logging information about it but log entries are not
very detailed. This change adds bandwidth amounts to the log entry.
https://github.com/storj/storj/issues/5470
Change-Id: I55ccad837d17b141501d3def1dec7ad5f3acdb0b
Create a config to specify one-time prices and corresponding coupon
ids for partners.
github issue: https://github.com/storj/storj-private/issues/118
Change-Id: I67b26e7208b12ba8f0e6dc1b164dd9545b09cac0
This change allows users who register with a partner that has
different project usage prices to see the correct prices in the
satellite UI.
Resolvesstorj/storj-private#90
Change-Id: I06bde50db474b25396671a27e282ef5637efe85b
This change allows for overriding project usage prices for a specific
partner so that users who sign up with that partner do not need their
invoices to be manually adjusted.
Relates to storj/storj-private#90
Change-Id: Ia54a9cc7c2f8064922bbb15861f974e5dea82d5a
Add node tally ranged loop observer and partial.
Add node tally randed observer to range loop peer.
Add config flag to select which loop to use for node tally.
Update satellite core to use segement/ranged loop based on a flag.
Duplicate existing node tally test but using ranged loop.
Change-Id: I6786f1a16933463fab5f79601bf438203a7a5f9e
Small cleanups of the observer stats init code:
1. Use sync.Once for race free addition to the monitoring chain
(purely defensive)
2. Set the observer durations before adding to the monitoring chain on
first use.
3. observerDurations slice does not need to be initialized to non-nil
Change-Id: I9ae8ec96debc7d52c4ee5d22762a89f21bb2e38c
* use the same DB application name for satellite and metabase
* use noop orders DB implementation to avoid storing allocated bandwidth
in DB
Change-Id: I20e88c694d38240fe1a20c45719e210cfb76402c
bucket_bandwidth_rollups table
We have performance problems with updating bucket_bandwidth_rollups. To
improve situation we can stop storing allocated bandwidth in this table.
This should reduce large number of updates which are comming from
metainfo endpoints, repair workers and audit.
Next step will be to drop `allocated` column completely from
bucket_bandwidth_rollups.
Allocated GET bandwidth is all we need and we are keeping it in
bucket_bandwidth_rollups table.
Change-Id: Ifdd26a89ba8262acbca6d794a6c02883ad0c0c9b
On generated console api endpoints allow either the project ID or the
public ID to be used as the ID parameter.
github issue: https://github.com/storj/storj/issues/5412
Change-Id: Ic9901ed273931a50ae12f20142a3c4938dfcc8c0
When an observer errors we still want to finish the other observers.
This changes store the error and continues the loop, skipping
the observer which errored out and setting the duration metric to -1.
When the error occurs in the process stage, it does continue the other
ranges of the same observer. It removes the observer entirely after the process
stage. To improve this would make it more complex due to race
conditions.
Closes https://github.com/storj/storj/issues/5389
Change-Id: I528432c491d4340817d6950f1200ee2b9e703309
Move the IsAuthenticated check until after initial parameter
parsing/validation. IsAuthenticated will be more expensive than
parsing/validation, so we should fail before auth if possible.
Change-Id: I96a020892eabcb750e8ec9ecc1d8b7d9bf8bf573
Add option AsOfSystemTime to segment provider to make it equivalent to
the old segment loop.
There's no comment on what it does because it's pretty complex and
makes no sense, but we can improve it later.
closes https://github.com/storj/storj/issues/5434
Change-Id: I8f09b03803e681e2fd41008c5dba67804b0f37a1
The `coupons`, `offers`, `coupon_usages`, `coupon_codes`, and
`user_credits` tables are not used anymore. They exist due to
legacy billing code which has already been removed.
Change-Id: Ie93af90a06e5247a74015af2a78a223d69249565
The shell script has different behavior on different operating systems,
and now has enough logic that it makes sense to put it into a go script.
This change replaces dbx/gen.sh with dbx/gen/main.go, which accomplishes
the same thing.
Change-Id: Ibb53ebf9c2475377aae1165cfe245140d7162026
The current satellitedb.dbx has grown quite big over time.
Split the single file into multiple smaller ones.
Change-Id: I8d6ca851b834ac60820aff565906f04aab661875
Update get usage-limits, daily-usage and salt endpoints to support
both project-ID and project-PublicID.
Issue: https://github.com/storj/storj/issues/5411
Change-Id: Iff0114a295d1a479b141bfffbfb31599844d1fc0
Update the delete API key by name and projectID to support project-ID
and project-publicID.
Issue: https://github.com/storj/storj/issues/5410
Change-Id: I3bd11b9c3ae1ad6ce662dfc18b42779d2e4edf9b
Add an observer to monitor ranged segment loop progress.
Tested by running the segment loop in storj-up and navigating to
http://<container>:11111/mon/stats and there is the entry:
rangedloop-live,scope=storj.io/storj/satellite/metabase/rangedloop numSegments=364523630000.000000
part of https://github.com/storj/storj/issues/5223
Change-Id: If3d2774d2f17f51eac86f47c6dda1fb8ad696dfe
Removing all references to column last_verification_reminder which is to be removed, due to new column verification_reminders
Issue: https://github.com/storj/storj/issues/4560
Change-Id: I7c9a426e946c7aed58e62c1eef80629daf6b1272
Support interruption of the ranged segment loop through context.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
Add public ID field to graphql Project so it can be used on the front
end. Additionally public_id needed to be added to the ListByOwnerID sql
query which is called by graphql OwnedProjectsQuery.
github issue: https://github.com/storj/storj/issues/5408
Change-Id: I2ec04363c20493dc0f9c70b6d1610f724f18ec2f
Wire up duration measurement of observers with monkit.
Tested by attaching a SleepObserver, starting the rangedloop in storj-up
and navigating to http://<container>:11111/mon/stats. It reports the
following statistic:
completed-observer-duration,observer=*rangedlooptest.SleepObserver,scope=storj.io/storj/satellite/metabase/rangedloop duration=10.000117
Change-Id: Ief131d34001dd5d3ba1d7be6f161986e1f66440d
Before we introduced objects versions internally move operation was
always failing when under target location object exists. But then we
had only single version 1 all the time. With versions different than 1
we need to check all existing objects under target location.
To be backward compatible with our API new logic looks like this:
* if there is no object under target location use source object version
as target version
* if there are only pending objects find first free (highest) version
which could be used to move object there
* if there is committed object under target location reject move
operation
Fixes https://github.com/storj/storj/issues/5403
Change-Id: I717f3e7c42470b406287d6ec335f6f057d3fc3b5
This change implements the ranged loop observer to replace the audit
chore that builds the audit queue.
The strategy employed by this change is to use a collector for each
segment range to build separate per-node segment reservoirs that are
then merge them during the join step.
In previous observer migrations, there were only a handful of tests so
the strategy was to duplicate them. In this package, there are dozens
of tests that utilize the chore. To reduce code churn and maintenance
burden until the chore is removed, this change introduces a helper that
runs tests under both the chore and observer, providing a pair of
functions that can be used to pause or run the queueing function.
https://github.com/storj/storj/issues/5232
Change-Id: I8bb4b4e55cf98b1aac9f26307e3a9a355cb3f506
add triggerAttemptPaymentIfFrozen to check if the account is frozen
and if frozen, will trigger an attempt to pay outstanding invoices
Issue: https://github.com/storj/storj/issues/5398
Change-Id: I0da6a982e2da4204dee219d98ce2d503cbbb6f8e
The tests are forked from the chore tests with slight adaptations for
being run against the ranged loop. I also moved a benchmark for the
database from chore_test.go to db_test.go.
The pathcollector is reused as a rangedloop.Partial.
https://github.com/storj/storj/issues/5234
Change-Id: I56182031d133812a9f4d4a433c01b9150af39f31
Track duration of all segment loop observers. Factor out functions to
reduce size.
Still need to send the measurements out via monkit.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
This modifies the userinfo endpoint to return appropriate errors;
PermissionDenied for untrusted peers and Unimplemented because
the endpoint isn't implemented
Change-Id: I5109bb204b5e1ce2e21fe16b003991b6c900a8ce
Implemented interception for http requests.
We redirect user to login page on every 401 response.
Issue:
https://github.com/storj/storj/issues/5339
Change-Id: Icba4fc0031cb2b4e682a1be078cdcf95b7fa6bfe
This change stubs userinfo endpoint from storj/common/pb/userinfo.proto.
It also adds config for allowed peers, and a method for verifying peers.
Issue: https://github.com/storj/storj/issues/5358
Change-Id: I057a0e873a9e9b3b9ad0bba69305f0d708bd9b9e
This change adds an account freeze service with methods for checking
if a user is frozen, freezing a user, and unfreezing a user.
Furthermore, methods for altering the usage limits of a user or project
have been implemented for use by the account freeze service.
Change-Id: I77fecfac5c152f134bec90165acfe4f1dea957e7
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
This change updates the stripecoinpayments service to optionally skip
generating line items for payments records that have no egress, storage,
or segments for the billing period.
This results in a reduction from 4 to 1 Stripe API calls for customers
who have no usage. The final API call is the attempt to generate an
invoice on stripe, which expectedly fails because there are no unapplied line
items. Removing that final API call would require some additional
queries and is out of scope for this change.
This functionality is behind the
`payments.stripe-coin-payments.skip-empty-invoices` feature flag.
https://github.com/storj/storj/issues/5381
Change-Id: Id184969a4c79047c40502336d69c51388ab03bf8
Now that we are doing scalable piecewise reverifications, the code for
handling the old way of doing things (containment, pending audits,
reporting, testing) can now be removed.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ief1a75f423eff682e8f3d57804e343b3409a6631
This commit pulls the big switch! We have been setting up piecewise
reverifications (the workers for which can be scaled independently of
the core) for several commits now, and this commit actually begins
making use of them.
The core of this commit is fairly small, but it requires changing the
semantics in all the tests that relate to reverifications, so it ends up
being a large change. The changes to the tests are mostly mechanical and
repetitive, though, so reviewers needn't worry much.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ibb421cc021664fd6e0096ffdf5b402a69b2d6f18
This change implements DB methods for interacting with the
account_freeze_event table and introduces structures related to
account freeze events.
Change-Id: Ib125b31dfb754b2428212c39b780e14cfc7f97bf
This change fixes the access of unset segments and keys on the reservoir
when the reservoir size is less than the max OR the number of sampled
segments is smaller than the reservoir size. It does so by tucking away
the segments and keys behind methods that return properly sized slices
into the segments/keys arrays.
It also fixes a bug in the housekeeping for the internal index variable
that holds onto how many items in the array have been populated. As part
of this fix, it changes the type of index to int8, which reduces the
size of the reservoir struct by 8 bytes.
The tests have been updated to provide better coverage for this case.
Change-Id: I3ceb17b692fe456fc4c1ca5d67d35c96aeb0a169
Adding this entry means that the database accessed as "reverifyqueue"
(`(*satelliteDBCollection).ReverifyQueue()`) can be located on a
different database host from the other databases, and things should
still work. There aren't any queries that do a JOIN on tables from
reverifyQueue and other things in satellitedb, for example.
This should really have been put here earlier, when reverifyqueue was
first added, but it's ok. This won't have any bearing on things until we
need to deploy to prod.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I76f68de79cd645c869f3dbfbe3b2c9c4f9359e8f
This method on the Verifier allows the caller to find, out of the nodes
holding pieces in a given segment, which ones are contained.
This method is not yet being used. It will be in a future commit.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I242cd999913ca4dabbe8a62767ed4869b31fca04
Implemented UI error tracking.
We use satellite analytics service to track the fact that UI error occurred and send minimal info to Segment (not Hubspot).
We send only the fact that UI error occurred and the place where this error occurred.
Extended notificator plugin error function to include the place where error occurred.
I made the place argument nullable to be always explicitly provided (build fails if place is not provided).
If place is not null then error event is triggered in the background.
Issue:
https://github.com/storj/storj-private/issues/107
Change-Id: I7d129fb29629979f5be6ff5dea37ad19b1a2397e
update the updateProject function to set user specified bandwidth and storage limits
fixes https://github.com/storj/storj/issues/5185
Change-Id: Ib4132487f6b7ea0afa7c57acfc358857b3e852d1
We missed proper handling of object copies for method
GetStreamPieceCountByNodeID which is used by metabase.GetObjectIPs.
That caused some lack of IPs returned when queriyng IPs of copy and
broke things like pices map on linksharing.
Fixes https://github.com/storj/storj/issues/5406
Change-Id: I9574776f34880788c2dc9ff78a6ae20d44fe628f
Here we add a worker class comparable to audit.Worker, which will be
responsible for pulling items off of the reverification queue and
calling reverifier.ReverifyPiece on them.
Note that piecewise reverification audits (which this will control) are
not yet being done. That is, nothing is being added to the
reverification queue at this point.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I94e28830e27caa49f2c8bd4a2336533e187ab69c
The Reporter is responsible for processing results from auditing
operations, logging the results, disqualifying nodes that reached
the maximum reverification count, and passing the results on to
the reputation system.
In this commit, we extend the Reporter so that it knows how to process
the results of piecewise reverification audits.
We also change most reporter-related tests so that reverifications
happen as piecewise reverification audits, exercising the new code.
Note that piecewise reverification audits are not yet being done outside
of tests. In a later commit, we will switch from doing segmentwise
reverifications to piecewise reverifications, as part of the
audit-scaling effort.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I9438164ce1ea4d9a1790d18d0e1046a8eb04d8e9
While researching logs from a large set of audits, I noticed that nearly
all of them had streamIDs starting with 0 or 1. This seemed very odd,
because streamIDs are supposed to be pretty much entirely random, and
every hex digit from 0-f should have been represented with roughly equal
frequency.
It turned out that our A-Chao implementation of reservoir sampling is
flawed. As far as we can tell, so is the Wikipedia implementation. No
one has yet reviewed the original 1982 paper by Dr. Chao in enough
detail to know where the error originated, but we do know that we have
been auditing segments near the beginning of the segment loop (low
streamIDs) far more often than segments near the end of the segment loop
(high streamIDs).
This change uses an algorithm Wikipedia calls "A-Res" instead, and adds
a test to check for that sort of bias creeping back in somehow. A-Res
will be slightly slower than A-Chao, because of a few extra steps that
need to be done, but it does appear to be selecting items uniformly.
Change-Id: I45eba4c522bafc729cebe2aab6f3fe65cd6336be
Some observers assume that they will observe all the segments for a
given stream, and that they will observe those segments in a sequential
stream over one or more iterations.
This change updates the range provider from rangedlooptest to provide
these guarantees.
The change also removes the Mock suffix from the provider/splitter types
since the package name (rangedlooptest) implies that the type is a test
double.
Change-Id: I927c409807e305787abcde57427baac22f663eaa
We have a bug in our behavior while doing API pods deployment. At this
time its possible to have pods with multiple versions flag set true only
partially for some of pods. Because of that it's possible to start new
object without removing existing/older version on BeginObject
(new behavior) and also don't remove that existing/older object on
CommitObject. That can cause to have two committed objects with
different versions and that's a state we want to avoid.
To fix it we are removing multiple versions flag from CommitObject to
always try delete existing objects. This way even if we don't remove
existing object on BeginObject it will be always removed while
committing.
Fixes https://github.com/storj/storj/issues/5373
Change-Id: Idc334bf5cc785d2f559af96e92c3de6d82ca58ba
Add an abstraction rangedloop.SegmentProvider to fetch chunks of
segments from the metainfo database in parallel.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Ife26467ea0c3be550bde0b05464ef1db62dd4d2a
Adds DeleteAllSessionsByUserIDExcept which removes all sessions except the specified session from the database and applies this function to enableMFA and disableMFA
addresses https://github.com/storj/storj-private/issues/15
Change-Id: I5d8c620dadbbda4a1b430ccf8a6121e167dd0761
Minimal implementation of the ranged (=threaded) segment loop
service, to improve performance over the existing loop.
Has tests with a an inmemory segment database
and example observer.
Does not have yet: database link, observer duration tracking,
suspicious processed ratio guard, rate limiting, minimum execution
interval per observer, etc.
Part of https://github.com/storj/storj/issues/5223
Change-Id: I08ffb392c3539e380f4e7b4f1afd56c4c394668d
This change shows STORJ token balance on the billing overview page instead of the Stripe balance it shows currently.
It changes the text on the "Available balance" card to reflect the new balance being displayed. Finally, it adds shortcuts to navigate straight to token history or add tokens modal when call to action on "Balance card"
Issue: https://github.com/storj/storj/issues/5204
Change-Id: Ic88e43c602e4949b6c6be4c7644c04f3c7d38585
To be able to verify segments in a list of buckets, this change:
- adds method ListBucketsStreamIDs to list all stream ids belonging to a list of buckets provided using a ListVerifyBucketList on which Add(projectID, bucketName) is defined.
- allows to specify a list of streamIDs to check in ListVerifySegments
Fixes https://github.com/storj/storj-private/issues/101
Change-Id: I72a48a0873a3056ac54ad56c0e9242364b2ae918
First, adding a logger argument allows the caller to have a logger
already set up with whatever extra fields they want here.
Secondly, we need to return the Outcome instead of a simple boolean so
that it can be passed on to the Reporter later (need to make the right
decision on increasing reputation vs decreasing it).
Thirdly, we collect the cached reputation information from the overlay
when creating the Orders, and return it from ReverifyPiece. This will
allow the Reporter to determine what reputation-status fields need to be
updated, similarly to how we include a map of ReputationStatus objects
in an audit.Report.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I5700b9ce543d18b857b81e684323b2d21c498cd8
NewContainment will replace Containment later in this commit chain, but
for now it is not yet being used.
NewContainment will allow a node to be contained for multiple pending
reverify jobs at a time. It is implemented by way of the reverify queue.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I126eda0b3dfc4710a88fe4a5f41780618ec19101
We have a bug where if number of buckets in the system will be
multiplication of batch size (2500) then loop that is going over
all buckets can run indefinitely.
Fixes https://github.com/storj/storj/issues/5374
Change-Id: Idd4d97c638db83e46528acb9abf223c98ad46223
Simple email validation before attempting to send notifications. If the
email is not valid, skip sending notifications and go to update
email_sent so we don't try it again. Also, move ValidateEmail function
into new package so it can be used in nodeevents without import cycle.
Change-Id: I63ce0fc84f7b1d964f7cc6da61206f54baaf1a21
It helps for the (*reverifyQueue).Insert() method to be idempotent (it
does not make sense for the same node to be under containment for the
same piece multiple times). This change allows for that, by adding an
`ON CONFLICT DO NOTHING` clause to the database query.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: Id2839ee185d5396c0bc2f84ffad610df9786f6c7
Adding a new worker comparable to Verifier, called Reverifier; as the
name suggests, it will be used for reverifications, whereas Verifier
will be used for verifications.
This allows distinct logging from the two classes, plus we can add some
configuration that is specific to the Reverifier.
There is a slight modification to GetNextJob that goes along with this.
This should have no impact on operational concerns.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: Ie60d2d833bc5db8660bb463dd93c764bb40fc49c
Previously, the node events chore would select based on the earliest
created_at. However, if for some reason this batch fails, it would still
be the next item to select. If there is a consistent error, the chore
would be stuck retrying the same batch over and over. Now instead
GetNextBatch orders by `last_attempted NULLS FIRST ASC, created_at ASC`.
If a batch fails during Notify, last_attempted is updated so we can move
on to a new batch if one exists.
Change-Id: Ia8458e05ac358d85b2f2c6d690f3d607d631be61
audit.Queues was the previous method of passing stacks of segments for
audit to the verifier. As of commit 68f9ce4a, this is now happening
by way of the auditor queue (database-backed, so that communication can
happen between multiple peers). audit.Queues is no longer needed.
Refs: https://github.com/storj/storj/issues/5228
Change-Id: I46f2d48d655fb66366c92146cdb6b85aef200552
SetNodeContained() will change the contained flag in the nodes table,
which will affect whether nodes are selected for new uploads. This flag
_should_ correlate with whether or not a given node has any entries in
the reverification queue. However, the reverification queue is intended
to be 'safely partitionable' from the nodes table, so we can't enforce
that characteristic transactionally. But this is ok; there are no dire
consequences if they are out of sync.
We will be adding a chore that updates the contained flag based on the
contents of the reverification queue periodically, if something fails
to set it directly when appropriate.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I26460d8718dee63fd55d00a44568b2065fc8fe30
GetByNodeID will allow querying the reverification queue to see if there
are any pending jobs for a given node ID. And thus, to see if that node
ID should be contained or not.
Some parameters on the other methods of the ReverifyQueue interface have
been changed to accept pointers; this was done ahead of the rest of the
changes for the reverification queue to better match the signatures of
the methods that these will replace once ReverifyQueue is actually being
used (meaning fewer changes to tests).
Refs: https://github.com/storj/storj/issues/5251
Change-Id: Ic38ce6d2c650702b69f1c7244a224f00a34893a1
This change removes the error type that is returned when a token
request contains an incorrect password. Instead, the generic error
type for invalid login credentials is used.
Change-Id: Ia7dbc38f4a08aeaeeac7ff5b5a801233e349b8b3
This change reduces the token links expiry time from 24h to 30m and improves the UI to promt users of the expiration.
see: https://github.com/storj/storj-private/issues/17
Change-Id: Iac00f5740fa84069937fdf9bd30a739b6db2a9e0
The audit chore will be pushing a large number of segments to be
audited, and the db might choke on that large insert when under load.
This change divides the insert up into batches, which can be sized
however is optimal for the backing database. It also arranges for
segments to be inserted in the order of the primary key, which helps
performance on some systems.
Refs: https://github.com/storj/storj/issues/5228
Change-Id: I941f580f690d681b80c86faf4abca2995e37135d
* storj/common
* storj/private
Latests common version requires small refactoring for names and types
used by metainfo code.
Change-Id: I224fe93b4751c996ba6e846be0e5677252cf830f
Reputation updates during repair currently consumes a lot of database
resources. Sometimes increasing the rate of repair is more important
than auditing a node based on whether they have or don't have the
correct piece during repair. This is the job of the audit service.
This commit is to implement an intermediate solution from this issue: https://github.com/storj/storj/issues/5089
This commit does not address the more in-depth fix discussed here: https://github.com/storj/storj/issues/4939
Change-Id: I4163b18d78a96fadf5265789fd73c8aa8def0e9f
This change causes rate limiting errors to be returned to the client
as JSON objects rather than plain text to prevent the satellite UI from
encountering issues when trying to parse them.
Resolvesstorj/customer-issues#88
Change-Id: I11abd19068927a22f1c28d18fc99e7dad8461834
We tested new upload flow (with multiple versions) to fix inconsistency
while uploading object on QA/EUN1/SLC. Now we would like to enable it
for all satellites by default. Tests required small adjustments.
Fixes https://github.com/storj/storj/issues/5283
Change-Id: I0d53c041abebc0d182ba5a88bb1dac906c29caf0
As part of the effort of splitting out the auditor workers to their own
process, we are transitioning the communication between the auditor
chore and the verification workers to a queue implemented in the
database, rather than the sequence of in-memory queues we used to use.
This logical database is safely partitionable from the rest of
satelliteDB.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I6cd31ac5265423271fbafe6127a86172c5cb53dc
We added alternative way to calculate bucket tallies for accounting and
now it's tested and we will enable it by default.
CollectBucketTallies was extended to support overriding current time
to be able to test handling expired objects.
Change-Id: I738b99a33fd2e086245f92d874c1cbb806e834c0
Add a new chore to periodically insert nodes who are offline and
have not gotten an offline email in a certain amount of time into node
events
Change-Id: I658b385bb777b0240c98092946a93d65bee94abc
Create NodeEvents Chore on satellite core to read nodeevents DB and
notify node operators on node events. The chore sends notifications
grouped by email and event type: it selects the oldest entry in
nodeevents.DB and also any other event with the same email and event
type no matter how old it is. The oldest entry of a group must exist for
a minimum amount of time before that group can be selected, however.
This minimum amount of time is a configurable value:
--node-events.selection-wait-period. This wait period allows us to
combine events of the same time and same email address into a singular
email.
Change-Id: I8b444aa324d2dae265cc27d9e9e85faef79195d8
read one is the wrong method when trying to select one row when there
are multiple. It returns TooManyRows error. Read first is the correct
method.
Change-Id: Ic6c92795486892ac041befd118b6945314bffeaa
Add LastOfflineEmail to overlay.NodeDossier. This is the last time a
node got an offline email. Add two new overlay db methods,
GetOfflineNodesForEmail and UpdateLastOfflineEmail. Edit db method
UpdateCheckIn to nullify last_offline_email if node is up.
Change-Id: I1ee60e7d98dd1b68348a57f9a4fb77c6c9895d6d
We have code that is used only by old uplinks and can fail at some point
but we don't interrupt anything and only log message about failure.
Until now it was logged as error but it's nothing critial so we can
reduce it to warning.
As an addition log entry was extended with more information about client
that is using this backward compatibility code.
Change-Id: Ie21c673ee59eb10de065cc371132f8f9505e2220
This change causes the session inactivity timer to be enabled unless
expressly specified otherwise.
Change-Id: I85b4014394afac2feb21f383cac414cddb09ca8f
Added new feature flag.
Reworked vuex logic to work properly with project level passphrase.
Implemented new simple set project level passphrase modal.
Issue:
https://github.com/storj/storj/issues/5280
Change-Id: I6a15e90ee9fa7aa8a09c67022466787090120f9c
Currently the primary key of the underlying rollup table has the
primary key being the bucket name, but we used to sort by projectID.
This caused dead locks due to the contention during updates/inserts.
We should reevalute if bucket name being the primary key is the right
way for this table, this should stop the long running and failing attempts tho.
Change-Id: Ie7d0f86944da48ad9cbd92eb162226882a2fb954
This change modifies the method responsible for returning project
usage summaries such that the end date of the given time period
is excluded to prevent overlap.
Change-Id: If06155efff5c6fce3865f5f6e4344873abe3e432
When a node checks in and its version is below the minimum, insert
BelowMinVersion event into node events
Change-Id: I0e437ac34496778369515cbc40c15676da8b27ae
Multipart upload requires to have the same UploadID returned from
different requests (BeginUpload, ListUploads). Otherwise client won't
be able to find existing uploads. Main issue was that data needed to
construct UploadID is in System metadata which can be filtered out
by listing option.
This change is fixing how we are setting Status for listed objects and
it's forcing reading System metadata if we are reading pending objects.
Fixes https://github.com/storj/storj/issues/5298
Change-Id: I8dd5fbab4421a64dc3ed95556408ead4c829f276
Upon adding members to a project using the Add Team Member modal,
users are now notified that only email addresses belonging to an
account will receive a project invitation. This notification appears
regardless of whether every submitted email corresponds to an account.
Previously, users received an error message if any email address not
attached to an account was submitted.
Change-Id: Ia014c8311c1347e001b1c6c33de73ea61f20b0cb
We want to be able to exclude contained nodes from nodes selection. For this, we add a 'contained' column to the nodes table to track the containment status.
Fixes https://github.com/storj/storj/issues/5231
Change-Id: Id78e645f172145adcb8664646e8ebf14e218b57b
Since the auditor will be moving to a different process from the
metainfo loop, we need a way of communicating which segments have
been chosen for audit. This queue will be that communication, for now.
Contrast this with the queue for _re_verifications in commit 9c67f62f.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I9a269c7ef21e6c5e9c6e5e1f3db298fe159a8a79
Hubspot is migrating from using API keys for authentication to OAuth.
This change migrates our Hubspot integration to use OAuth tokens.
It modifies the EnqueueCreateUser code to not send empty HubspotUTK to hubspot, and to return error for failed requests.
see: https://developers.hubspot.com/changelog/upcoming-api-key-sunset
Change-Id: I422f00e3e3caeff3ff3d08ddec059502b9addaee
* Mark node events table as "safely partitionable", meaning that it
is/will not be queried relationally along with other tables. This way,
we can safely use this table in Postgres rather than CockroachDB,
where most of our other satellite tables are running.
* Add a dbx-generated delete function to the node events table, to allow
us to easily delete entries created before a provided time. This
allows us to keep the table clean, since there is no need to persist
entries after emails have been sent.
Change-Id: I25e8a5c4092fe49dcfa6c8bb73f2043646bb611f
Libuplink is using some aliases to storj package which we will
move directly to libuplink and remove from common/storj.
To make code compilable we need to fix places where we
are using aliased types directly to be able to update libuplink.
Change-Id: I7222a927af3b41e214d1c9204917f3ebce4727ce
GetObject and GetObjectIPs are invoked by the Linksharing service to
display the shared object and its map. These two endpoint currently
require read permission.
There is a use case where an object can be shared with an access grant
that has only list permission. In such a case, the expectation is that
the linksharing service would still display the metadata of the shared
object (name, size, map), but the content would be still inaccessible.
See https://github.com/storj/gateway-mt/issues/209 for details.
This change allows GetObject and GetObjectIPs to require either read or
list permission to support the described use case.
Change-Id: I3477edc7bf8990e9848482890da047094c875d09
When a customer has no pending line items, an invoice will not be
generated for them and the Stripe client method responsible for
creating new invoices returns nil. This change adds a nil check to
account for this possibility to ensure that no panics are caused
by attempted processing of the invoice.
Change-Id: Id184d027d7447f0ef876db58601ab6cf63927fc5
Some changes to make code cleaner and easier to adopt to new ranged
loop.
* removed unneeded mutex
* reorganize constructor args
* avoid creating the same redundancy scheme for each segment piece
Change-Id: I81f3f6597147fc515516949db3ce796a60b1c8a0
Pair uuid's to create ranges. Will be used to parallelize the segment
loop.
Part of https://github.com/storj/storj/issues/5223
Change-Id: I73e2fb8a2cd379b840864449b6251b48feeb7b66
Instead of sending emails at the time the node is seen to be back
online, we have decided to send the event to the node events table,
which will initiate the email sending process at some point.
Change-Id: Id756209498112579de8e78ee20ad2df54571a617
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
New flag 'MultipleVersions' was not correctly passed from metainfo
configuration to metabase configuration. Because configuration was
set correctly for unit tests we didn't catch it and issue was found
while testing on QA satellite.
This change reduce number of places where new metabase flags needs
to be propagated from metainfo configuration to avoid problems with
setting new flags in the future.
Fixes https://github.com/storj/storj/issues/5274
Change-Id: I74bc122649febefd87f665be2fba628f6bfd9044
since amount of objects is growing and looping through all of them
starts taking lot of time, we are switching for SQL query to do it
in chunks of tallies per bucket. 2nd part of issue fix.
Closes https://github.com/storj/team-metainfo/issues/125
Change-Id: Ia26bcac0a7e2c6503df9ebbf4817a636841d3284
Change he bloomfilter generation process to prefix the objects with a date and update the LATEST object with the prefix. The sender will read the LATEST file to get the prefix to process.
Change-Id: Iae0d3c49015d57f391d87789fb799a7d774066bf
The current deployment strategy requires that the GC bloomfilter generation process executes only once and exits.
Change-Id: I952991f126596aa165d1f2e9fce6f8548c21bdba
Implement node events DB with Insert and GetLatestByEmailAndEvent. Get
was changed to GetLatestByEmailAndEvent so we can verify items are being
inserted into the table without needing the ID, which is not available
to us in the tests.
Change-Id: I4abe63631c44774cd7e795fbab0cbab4d801db4c
Change node_events schema to use an id column as primary key rather than
node id because there can be multiple events per node id.
Change-Id: I518d8ef9ea658764876483e282a4058d3c4910f4
Add new table for node events. We can use this to notify node
operators of certain node events. Further, we can squash events for
multiple nodes with the same email into a single notification.
Change-Id: Icea6dd939df8fe4a98806bd79c014e21d239c43e
ReverifyPiece() is not currently hooked up to anything, but is planned
to take the place of audit.(*Verifier).Reverify().
ReverifyPiece() works by downloading one piece in its entirety, rather
than pulling an entire stripe across many nodes.
Change-Id: Ie2c680f4d3c3b65273a72466a3f9f55c115b0311
This table will be used as a queue for pieces that need to be reverified
(a regular audit timed out on the owning node, so now that node is
contained and we need to validate the piece before un-containing it).
Refs: https://github.com/storj/storj/issues/5228
Change-Id: I5dcd26b6adced8674cbd81884c1543a61ea9d4c8
BeginCopyObject checks twice for write permission in the destination
bucket. One check should be enough.
Change-Id: I3d5935d34f69cd48eaaf00d0117683edfdcefc05
The procedure responsible for node reputation status comparison could
return an invalid result due to comparing a status timestamp against
itself rather than comparing it against another. This results in
unnecessary database updates that could be avoided otherwise.
This change modifies the procedure to resolve this issue.
Change-Id: Id147e1942e994e8bca4ced2a9358f2474927d6ec
We had multiple experiment so far to collect high cardinality data (mainly in aggregated form).
1. we have a `/top` endpoint which aggregates events with upper bound
2. we use same api (eventstat) to publish S3 gateway-mt agents to influxdb
This patch starts to replace theses api with jtolio/eventkit. Instead of aggregation all events can be sent to a collector host where we can do aggregation and/or persisting data.
Change-Id: Id6df4882b51d2dbd2be9401ee4199d14f3ff7186
The threshold of piece deletions from the nodes during CommitObject
when overriding an existing object seemed to cause a race condition in
tests.
This change makes the threshold configurable so we can set it to maximum
so CommitObject waits until all pieces are removed from the nodes in the
test.
Change-Id: Idf6b52e71d0082a1cd87ad99a2edded6892d02a8
We removed monkit call from "object" method because it was using
too much cpu and was visible on cpu profile but we should first try
optimized version of this call.
Change-Id: Ib76d8a2968a704ce47235c6dac6edad4e40bde48
One of two parts to stop using objects loop for bucket accounting,
this method collects bucket tallies from list of bucket locations
part1 of: https://github.com/storj/team-metainfo/issues/125
Change-Id: Id2d492582453e28463cddf1245622fb7f191050c
We want to send emails to SNOs. Node status changes go through the
overlay service, so it's a good place to add the mail service.
Add the mailservice.Service, satellite address, and satellite name to
overlay service. Also add feature flag --overlay.send-node-emails
Change-Id: I3bd2cb3bf22f9724954ce2374f8b651b902b3a24
Add getSalt to projects api. Add action, GET_SALT, on Store
Projects module to make the api request and return the salt
string everywhere in the web app that generates an access grant.
The Wasm code which is used to create the access grant has been
changed to decode the salt as a base64 encoded string. The names
of the function calls in the changed Wasm code have also been
changed to ensure that access grant creation fails if JS access
grant worker code and Wasm code are not the same version.
https://github.com/storj/storj-private/issues/64
Change-Id: Ia2bc4cbadad84b066ca1882b042a3f0bb13c783a
We have new flow where existing object is deleted not on begin
object but on commit object. Deletion on commit object is still
missing deletion from storage nodes. This change adds this part
to the code.
Fixes https://github.com/storj/storj/issues/5222
Change-Id: Ibfd34665b2a055ec6c0d6e260c1a57e8a4c62b0e
We have a code to limit segments loop in case it will hit DB to hard
but so far we didn't use this loop feature in production. This is a
simple change to avoid logic responsible for rate limiting and its
monitoring if limiting is disabled (RateLimit = 0)
Change-Id: I43e07b407c6e65cf252303159d052eef250d1bea
Until this change we were stripping prefix from object key on satellite side. Because of that we were transferring over network unnecessary data
from DB. This change adjusts iterator SQL queries to use SUBSTRING to
remove prefix on DB side and avoid sending it to satellite.
Benchmark against 'main':
unfortunately "time/op" is very unstable while doing local bench in this
case and sometimes there is no difference in time and sometimes its up to 18%. I never saw results when old solution is faster then new one. Results for "alloc/op" and "allocs/op" are rather consistent.
name old time/op new time/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 1.98ms ± 6% 2.05ms ±23% ~ (p=1.000 n=9+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 3.97ms ± 8% 3.42ms ±20% -13.86% (p=0.005 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 8.42ms ±16% 7.58ms ± 5% -9.91% (p=0.002 n=10+10)
name old alloc/op new alloc/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 16.7kB ± 0% 16.9kB ± 0% +1.16% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 27.3kB ± 0% 28.2kB ± 0% +3.31% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 60.0kB ± 0% 62.4kB ± 0% +3.93% (p=0.000 n=10+8)
name old allocs/op new allocs/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 312 ± 0% 315 ± 0% +0.96% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 526 ± 0% 541 ± 0% +2.85% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 1.16k ± 0% 1.23k ± 0% +5.24% (p=0.000 n=10+10)
Change-Id: I23e501494ededafb2dd5ea903e8e4e313b42e956
This change increments users' failed_login_count in the database layer to avoid potential data race.
It also updates the login_lockout_expiration as well in one operation.
see: https://github.com/storj/storj/issues/4986
Change-Id: I74624f1bee31667b269cb205d74d16e79daabcb6
With this change we are switching methods to begin object, from
BeginObjectExactVersion to BeginObjectNextVersion. Main implication
is that from now it will be possible to have object with version
different than 1. New object will always get first available version.
Main reason to do this it to avoid deleting existing object during
reuploading object. Now we can create multiple pending objects but
only last committed will be available to the user. Any previous
committed object will be deleted.Because of that we moved logic to
delete existing object from BeginObject to CommitoObject request.
New logic is behind feature flat to be able to test it well first
before enablng on production.
Fixes https://github.com/storj/storj/issues/4871
Change-Id: I2dd9c7364fd93796a05ef607bda9c39a741e6a89
The flags weren't properly loading from config.
The code assumed that every node that's online for downloading also have
data uploaded to them -- which is not true.
Change-Id: Ifd65a47b9eca5b4841231928244fab17acbde6fb
This is another change to remove monkit calls from fast methods. Those
calls are visible in CPU profiles.
Change-Id: Ib3beba0dca6a6d93c3342b0994c580f78bbdd50b
After you create a brand new cluster (with storj-up, for example) the project usage fails during the first 5 minutes.
The problem is the usage of `AS OF SYSTEM TIME` which points to a time where the master database didn't exist.
In this specific case the database not found error can be ignored to avoid such messages. (if the database is really missing, we will have problems way more earlier, eg. at the login)
Change-Id: I51ee78994d91fc2a14b56646402faaaa8154c934
This patch addresses the following issues:
1. Running full migration in cockroachdb is quite slow. We already have an approach for unit tests to start from the latest snapshot. This patch makes it possible to use it for integrations tests.
2. Migration requires executing a separated command which makes it hard to run application in containerized test environments (like storj-up) or from IDE. This patch introduces a hidden flag to run migration.
3. Test user creation is painful. We do it with calling GraphQL + admin API. Providing an option with testuser makes the integration tests significant more simple (especially as the projectID -> access grant can be predictable)
Change-Id: I61010728727b490ea6aac32620f2da0484966727
Add an extra parameter to the pay-invoices command that can be used to restrict which invoices will have a payment attempted in stripe. The parameter should be of the form MM/DD/YYY and any invoices created on or after the date will have token balances applied and be processed for payment according to stripe subscriptions settings.
Change-Id: I5da5070d3ac97f45c05c02f2849254bdc44413c3
This change causes new invoices to be scheduled for automatic
advancement through Stripe if their amount due is zero. Invoices
marked for automatic advancement are exempt from the manual invoice
finalization procedure.
Change-Id: Ic583db4c86ec5243d7506d380ca3faee5e9a58d3
This change introduces the generate-invoices satellite billing
command whose functionality is equivalent to running
apply-free-coupons, prepare-invoice-records,
create-project-invoice-items, and create-invoices in order.
Invoice finalization must still be performed separately.
Change-Id: Ia3d80b95eef1f2776c38bd730ed731e42ec4c35e
Monkit calls for fast methods which are executed very frequently can
slowdown whole process. This change removes monkit calls which are not
used.
See https://review.dev.storj.io/c/storj/storj/+/8498 as an example of
speed improvement after removing monkit calls.
Change-Id: If6567d80e05b748e6393b58a5142e43013107c61
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/multiple_segments-8 5.56µs ± 5% 0.69µs ±12% -87.57% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/multiple_segments-8 2.72kB ± 0% 0.00kB ~ (p=0.079 n=4+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/multiple_segments-8 50.0 ± 0% 0.0 -100.00% (p=0.008 n=5+5)
Change-Id: I20527fb576cd81db667a81929fa95b810ee11b14
It looks that monikt monitoring can give high CPU overhead for
segments loop observer. With this code we are changing how monitoring
is initialized for observer methods. This optimization affects mainly
path where segment is healthy and doesn't require repair. Benchmark
is also added to show difference between old and new approach.
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/healthy_segment-8 8.55µs ± 4% 1.37µs ± 6% -84.03% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/healthy_segment-8 2.63kB ± 0% 0.17kB ± 0% -93.62% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/healthy_segment-8 54.0 ± 0% 8.0 ± 0% -85.19% (p=0.008 n=5+5)
Change-Id: Ie138eab0d59e436395b13f57bdfb11f9871d4c18
Two things were done to optimize audit observer:
* monik call was removed as we have different way to track it
* no new allocation for audit.Segment struct inside observer
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/multiple_segments-8 5.85µs ± 1% 0.74µs ± 4% -87.28% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/multiple_segments-8 2.72kB ± 0% 0.00kB ~ (p=0.079 n=4+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/multiple_segments-8 50.0 ± 0% 0.0 -100.00% (p=0.008 n=5+5)
Change-Id: Ib973e48782bad4346eee1cd5aee77f0a50f69258
If we need to restore the satelliteDB from a backup, we must preserve the user - storj token wallet address association. This commit adds a log statement of this information after a user successfully claims a wallet. We can perform a SQL update to reassign the wallet address to the user if needed.
Change-Id: Ia5c25d7ac57e59b35865d74068196e42bc4ffe87
We have an alert on `not_enough_shares_for_audit` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the audit framework to act in that way.
Instead, in this change, we add three new metrics,
`audit_not_enough_nodes_online`, `audit_not_enough_shares_acquired`, and
`audit_suspected_network_problem`. When an audit fails, and emits
`not_enough_shares_for_audit`, we will now determine whether it looks
like we are having network problems (most errors are connection
failures, possibly also some successful connections which subsequently
time out) or whether something else has happened.
After this is deployed, we can remove the alert on
`not_enough_shares_for_audit` and add new alerts on
`audit_not_enough_nodes_online` and `audit_not_enough_shares_acquired`.
`audit_suspected_network_problem` does not need an alert.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: Ibb256bc19d2578904f71f5229111ac98e5212fcb
While investigating high memory consumption on a Redis instance, it was found that much of the memory consumed was from cached redis scripts.
Redis caches scripts based on the hash of the script itself. This change uses ARGV to reduce the number of cached scripts.
Change-Id: Ia878fe81552a3067f09e60c44bb4ace25c6b5f9a
When doing server-side copy, deletes the committed version of the target location if it already exists. It does not touch pending versions. The version of the copy is set to the highest already existing version + 1.
Fixes: https://github.com/storj/storj/issues/5071
Change-Id: I1d91ac17054834b1f4f0970a9fa5d58198c58a37
Change the default loop interval for querying for new payments and adding them into the billing table from 1 minute to 15 seconds.
Change-Id: I26cf4a764cbe1de4c9b839ad60352374d8231522
Introduces a new endpoint on the satellite web server to get the
project's salt. The endpoint utilizes a new console service method
GetSalt which in turn calls the project DB GetSalt method if the
user is authorized. It returns the project salt bytes as a base64
encoded string in the response.
Change-Id: Ia13b5a4b8580e7bdad0dbb98014a276b1c74b46d
Restore functionality where retain filters can be sent out to multiple
storage nodes simultaneously.
Fixes https://github.com/storj/team-metainfo/issues/121
Change-Id: I2bf86a166b09c6a277c1cb455cdca0165ce6b8af
Add new project db method, GetSalt, to get project salt. If salt
column is empty, return the sha-256 hash of the project ID. This
new method is used in metainfo endpoint ProjectInfo to return the
project salt to the client. This is backwards compatible because
the salt column is not populated yet. The updated endpoint will
do the same thing as the current endpoint.
Change-Id: I7eba376c865e10995a5a916302feca7cd7c7efa2
Assert that listing works with our new object consistency approach.
Half of https://github.com/storj/storj/issues/4868
Change-Id: I5e92f86122b50103cec7bf6d3b2c8ed103caceec
Restore previously existing end-to-end garbage collection test using
the new separate services for bloom filter generation and storage node
communication.
Original tests can be found under:
https://github.com/storj/storj/blob/v1.63.1/satellite/gc/gc_test.go
Change-Id: I42d1ab0f9981dfe183140da4d08087f4a6cd9296
Return the balance as currency object with a value and currency. The values are returned in USDollarsMicro (6 digits after the decimal).
Change-Id: I88c87faf3311b72dedd293d4e754c2fd5c03c128
Change the default number of required block confirmations for a payment to be confirmed from 12 to 15.
Change-Id: I44c258134c293e7691623bc00c504130aa69a96a
We have an alert on `repair_too_many_nodes_failed` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the repair framework to act in that way.
Instead, in this change, we change the way that
`repair_too_many_nodes_failed` works. When a repair fails, we collect
piece fetch errors by type and determine from them whether it looks like
we are having network problems (most errors are connection failures,
possibly also some successful connections which subsequently time out)
or whether something else has happened.
We will now only emit `repair_too_many_nodes_failed` when the outcome
does not look like a network failure. In the network failure case, we
will instead emit `repair_suspected_network_problem`.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: I49df98da5df9c606b95ad08a2bdfec8092fba926
This structure is entirely unused within the audit module, and is only
used by repair code. Accordingly, this change moves the structure from
audit code to repair code.
Also, we take the opportunity here to rename the structure to something
less generic.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: If85b37e08620cda1fde2afe98206293e02b5c36e
Before and after segments loop we are collecting stats about number of entries in segments and objects table. We are using number of segments
to validate loop execution but currently we are not using number of
objects anywhere. This change drops SQL query to count objects count as
it's not use anywhere at the moment.
Change-Id: I25ce77758870beb0daa5c0e21084a4c633a26f15
This change adds the option of requiring users to pass a captcha
verification before password recovery emails can be sent to them.
The captcha for the Forgot Password form shares a configuration with
the one for the login form.
Change-Id: I27fdb4ed42cd9da1b4b8b1e80357892dc4091765
