* Added batch update stats for recordAuditSuccessStatus
* Added batch update stats to recordAuditFailStatus
* added configurable batch size
* build individual update/delete statements so the statements can be batched into 1 call to the DB
* notified #config-changes channel and ran make update-satellite-config-lock
* updated tests to use batch update stats
* Added a gc package at satellite/gc, which contains the gc.Service, which runs garbage collection integrated with the metainfoloop, and the gc PieceTracker, which implements the metainfo loop Observer interface and stores all of the filters (about which pieces are good) for each node.
* Added a gc config located at satellite/gc/service.go (loop disabled by default in release)
* Creates bloom filters with pieces to be retained inside the metainfo loop
* Sends RetainRequests (or filters with good piece ids) to all storage nodes.
* pkg/datarepair: Add test to check num upload pieces
Add a new test for ensuring the number of pieces that the repair process
upload when a segment is injured.
* satellite/orders: Don't create "put order limits" over total
Repair must not create "put order limits" more than the total count.
* pkg/datarepair: Update upload repair pieces test
Update the test which checks the number of pieces which are uploaded
during a repair for using the same excess over the success threshold
value than the implementation.
* satellites/orders: Limit repair put order for not being total
Limit the number of put orders to be used by repair for only uploading
pieces to a % excess over the successful threshold.
* pkg/datarepair: Change DataRepair test to pass again
Make some changes in the DataRepair test to make pass again after the
repair upload repaired pieces only until a % excess over success
threshold.
Also update the steps description of the DataRepair test after it has been
changed, to match on what's now, besides to leave it more generic for
avoiding having to update it on minimal future refactorings.
* satellite: Make repair excess optimal threshold configurable
Add a new configuration parameter to the satellite for being able to
configure the percentage excess over the optimal threshold, used for
determining how many pieces should be repaired/uploaded, rather than
having the value hard coded.
* repairer: Add configurable param to segments/repairer
Add a new parameters to the segment/repairer to calculate the maximum
number of excess nodes, based on the optimal threshold, that repaired
pieces can be uploaded.
This new parameter has been added for not returning more nodes than the
number of upload orders for data repair satellite service calculate for
repairing pieces.
* pkg/storage/ec: Update log message in clien.Repair
* satellite: Update configuration lock file
* pkg/process/metrics: add an instance prefix
the distinction between which satellite is sending which
data should go in the instance field, not the suffix or application
fields. (un)fortunately, the instance id is deliberately not
configurable because we don't want it to be easy to accidentally
have multiple applications collide with the same instance id.
so we're currently stuffing the human readable instance in the
suffix. :(
perhaps a reasonable tradeoff would be an optional instance
prefix that allows operators to put their domain name in
the instance
Change-Id: I6fcc8498be908c5740439cc00f77474ad151febd
* linting
Change-Id: I9f9a44fa9a2634ef5e4f89548d42d57ce9e4450e
* move offer out of marketing package and remove marketing package
* fix imports
* fix rename errors
* remove offer service
* change package name from offers to rewards
* fix linting
* remove unused code and use appropriate comment
* scripts/tag-release.sh: libuplink release tagging
a couple of arch review meetings ago we discussed how to make sure
that it is much easier to get the release defaults for binaries,
libraries, and so on. we already imperfectly solved the binary
problem with the release.sh script, but (until now!) have not solved
the problem of getting release defaults for people building from
source.
the solution we seemed to all prefer was to make sure our tagged
version commits check the release state into the source code.
this script aides in tagging commits with version tags and
updating the source defaults. it still plays nicely with
release.sh and our other build processes.
after this is merged we should configure github/go modules to
prefer people use one of our tags instead of master (which will
keep dev defaults).
Change-Id: I36c5c33a1bc90ec1685f59b05dde779090e252b6
* gofmt release.go
Change-Id: I6e968eff86230496e9cbddecd767ca8d8ff36ba4
* regex for version tag
Change-Id: Icaa6d753ffc962115d961bcabe9daed89b16430c
* added some docs
Change-Id: Ide624fab794ce849e3a3e7254fb038251bba0c71
* add voucher service on storage node
* config field tag syntax, go routines for requests
* hook up voucher service in storagenode/peer.go
* add voucher config to testplanet
* add voucher config to testplanet
* add voucher response status INVALID, ACCEPTED, REJECTED
* add a test for vouchers service
* handle no row from GetValid, test it
* add trust pool to voucher service
* use trusted list to get satellites
* verify vouchers upon receipt
* test VerifyVoucher
* set to only listen on 127.0.0.1, move static files to same location, better template handling
* handle error
* fix path in storj-sim
* revert template handling changes
* code shouldn't panic on invalid tempalte
* do not rewrite once writing has started
* write correct error code
* use filepath for path handling
* revert change
* fix
* fix mod tidy
* use correct error code for not found, avoid infinite loop on failure
* Set up new port 8090 for in offers
Clean up commented code
Rename offers to offersweb
Remove unused code
Add todos for adding front-end templates
Add middleware for only allow local access
Add comment
Fix linting error
Remove commented code
Update storj-sim
Check request IP against Host IP
Use net pakcage to retrieve IP address
Rename service to marketing
* Add wrapper for all errors
* fix conflicts
* update the config file
* fix linting error
* remove unused packages
* remove global runtime var and add flag to storj-sim for mar static dir
* remove debugging lines
* add new config for test data and check if static dir flag is set before passing to mux
* change 'console' to 'marketing' for test data config
* fix linting errors
* update config flag
* Trigger Jenkins
* Trigger CLA
* reputation: Add configuration parameters
Add the configuration parameters which will be used by the algorithm
which will calculate the storage node reputation.
Because the reputation calculation is based on audit and uptime check
results some configuration parameters are in pkg/audit, others in
pkg/discovery and other in the satellite which will combine the both
reputation results to obtain the storage node reputation for repair and
uplink.
* satellite-config: Refresh lock file with new params
Refresh the Satellite configuration yaml lock file with the new
parameters added in this branch.
* uplink: Mark encryption key config field for setup
Set the "setup" property to the `EncryptionConfig.EncrptionKey` for
avoiding to save it in the configuration file.
This field is only meant for using in the command line parameters which
need to use a different encryption key than the one present in the key
file or use it when there is not set any encryption key file path.
* cmd/uplink: Setup non-interactive accept enc key
Change the uplink CLI setup command non-interactive to save the
encryption key into a file when it's passed through the flag
--enc.encryption-key
Previous to this change it wasn't possible to create an key file despite
of that the flag was provided, so it was useless on the setup command.
* cmd/uplink: Reuse logic to read pwd from terminal
Reuse the logic which is already implemented in the pkg/cfgstruct for
reading a password from the terminal on interactive mode, rather than
duplicating it in the setup command.
* cmd/gateway: Use encryption key file flags
The cmd/gateway was still using the `enc.key` configuration field which
doesn't exist anymore and its setup command wasn't using the
`enc.key-filepath` with combination of the `enc.encryption-key` for
generating a file with the encryption key.
This commit update the cmd/gateway appropriately and move to the uplink
package the function used by cmd/uplink to save the encryption key for
allowing to also be used by the cmd/gateway without duplicating the
logic.
* cmd/storj-sim: Adapt gateway config cmd changes
Adapt the cmd/storj-sim to correctly pass the parameters to the
cmd/gateway setup and run command.
* scripts: Don't pass the --enc.encryption-key flag
uplink configuration has changed to only support the
`--enc.encryption-key` flag for setup commands and consequently the
cmd/uplink and cmd/gateway don't accept this flag over other commands,
hence the test for the uplink had to be updated for no passing the
flag on the multiples calls that the test do to cmd/uplink.
* uplink: Remove func which aren't useful anymore
Remove the function which allows to user or load an encryption key
because it isn't needed anymore since the `--enc.encryption-key` flag is
only available for the setup command.
Consequently remove its usage from cmd/uplink and cmd/gateway, because
such flag will always be empty because in case that's passed Cobra will
return an error due to a "unknown flag".
* init marketing service
Fix linting error
Create offerdb implementation
Create offers service
Add update method
Create offer table and migration
Fix linting error
fix conflicts
Insert new data
Change duration to have clear indication to be based on days
add error wrapper
Change from using uuid to int for id field
* Create Marketing service
* make error virable name more readable
* add condition in update service method to check offer status
* generate lock file
Change get to listAllOffers
* Add method for getting current offer
wip
* add check for expires_at in update method
* Fix conflicts
* add copyright header
* Fix linting error
* only allow update to active offers
* add isDefault argument to GetCurrent
* Update lock file
* add migration file
* finish migrate for adding credit_in_cents for both award and invitee
* save 100 years as expiration date for default offers
* create crud test for offers
* add GetCurrent test
* modify doc
* Fix GetCurrent to work with default offer
* fix linting issue
* add more tests and address feedbacks
* fix migration file
* add type column back to match with mockup design
* add type column back to match with mockup design
* move doc changes to new pr
* add comments
* change GetCurrent to GetCurrentByType
* fix typo
