The billing history currently shows the Total amount from the Stripe
invoice. In fact, this value is just the amount deducted from the Stripe
balance. It does not reflect any deduction from promotional coupon or
bonus credits.
This patch adds the deducted amount form the promotional coupons and
bonus credits to the displayed amount in billing history. This way
customers have better understading of the total amount deducted from
their account balance on the satellite.
Change-Id: Ibd7f611a6cea0143a3059f39dd1d9ef21c264d8c
GetNodes returned references to nodes in the immutable state, however
some parts of code expect them to be modified.
Change-Id: I5be1866f95e0dbe062a6b6be60e29f2365c35faa
Also distinguish the purpose for selecting nodes to avoid potential
confusion, what should allow caching and what shouldn't.
Change-Id: Iee2451c1f10d0f1c81feb1641507400d89918d61
Add a flag that allows us to easily switch disqualification from
suspension mode on or off. A node will only be disqualified from
suspension mode if it has been suspended for longer than the grace
period AND the SuspensionDQEnabled flag is true.
Change-Id: I9e67caa727183cd52ab2042b0a370a1bcaebe792
Currently uploads can cause a lot of IOPS, reduce this by introducing a
in-memory buffer on-top of the file.
Change-Id: I5f4e3e01c0a36258271d180b922107de447bcb59
TestVerifierSlowDownload would sometimes not have enough nodes finish in
the allotted deadline period. This increases the deadline and also does
not assert that exactly 3 have finished. Instead, in keeping with the
purpose of the test, it asserts that the slow download is never counted
as a success and is always counted as a pending audit in the final
report.
Change-Id: I180734fcc4a499420c75164bad6253ed155d87de
CreateTables hasn't been quite true for a while now, rename to
MigrateToLatest to be clearer in it's behavior.
Change-Id: Ida48e95122a5d9b7a814e922d3698e00024a2ba7
The UpdateAddress method use to be used when storage node's checked in with the Satellite, but once the contact service was created this method was no longer used. This PR finally removes it.
Change-Id: Ib3f83c8003269671d97d54f21ee69665fa663f24
time.Now() in a short amount of time can return the exact same value.
Ensure that the test uses times that are distinct.
Change-Id: Ia653ce0af4bfcf7b5da133a9cf98b823033d9592
Before the deleter would close its done channel once, so if additional
tests shared a storagenode, even if not in parallel, the later waits
would not work properly. This fixes that problem.
Change-Id: I7dcacf6699cef7c2c2948ba0f4369ef520601bf5
CustomerRepositoryList relied on created at time for the output sorting,
however the granularity of the timer may cause multiple customers
having the same "created at" time.
Add a sleep so that every customer does get a unique time.
Change-Id: If2923174f304fa5f41260d500f6139e3fa7c3ba5
Delay of 100ms could happen due to other things happening on the test
server. Increase the time to 1s.
Change-Id: I2c7c21f966101771633d73e84cf9850d28089e71
Sometimes nodes who have gracefully exited will still be holding pieces
according to the satellite. This has some unintended side effects
currently, such as nodes getting disqualified after having successfully
exited.
* When the audit reporter attempts to update node stats, do not update
stats (alpha, beta, suspension, disqualification) if the node has
finished graceful exit (audit/reporter_test.go TestGracefullyExitedNotUpdated)
* Treat gracefully exited nodes as "not reputable" so that the repairer
and checker do not count them as healthy (overlay/statdb_test.go
TestKnownUnreliableOrOffline, repair/repair_test.go
TestRepairGracefullyExited)
Change-Id: I1920d60dd35de5b2385a9b06989397628a2f1272
When running testplanet tests, mark storagenode peer PieceDeleter as in
testing mode so that you don't have to do it on each test.
Change-Id: I2592e02c63f8bcc9152ecf436bac4e798b08bccf
Currently Cockroach isn't performant for concurrent database setup and
tear-down. Instead of a single instance allow setting multiple potential
connection strings and let the tests pick one connection string
randomly.
This improves test duration by ~10 minutes.
While we are at significantly changing how pgtest works, introduce
helper PickPostgres and PickCockroach for selecting the database to
reduce code duplications in multiple places.
Change-Id: I8ad171d5c4c8a4fc081ec2ae9bdd0cc948a80619
In cases like the segment reaper script connecting to the metainfodb,
we don't want a db migration to happen automatically when we call
metainfo.NewStore. This adds MigrateToLatest method for postgreskv
and cockroackv, and calls MigrateToLatest in places where NewStore used
to create tables.
Change-Id: I682d0f26d609af0601dfdb32a24866cdf5d32a7e
There was a race in the test code for piece deleter, which made it
possible to broadcast on the condition variable before anyone was
waiting. This change fixes that and has Wait take a context so it times
out with the context.
Change-Id: Ia4f77a7b7d2287d5ab1d7ba541caeb1ba036dba3
A/B indicates that B is a subtest of A, however in this case they
represent a configuration of the test, not a subtest.
Change-Id: I64eed5d5bcb12759e54fe4b5373f8e88488e50f7
Added a per IP rate limiter to the console web.
Cleaned up password check to leak less bcyrpt info.
Change-Id: I3c882978bd8de3ee9428cb6434a41ab2fc405fb2
To improve delete performance, we want to process deletes asynchronously
once the message has been received from the satellite. This change makes
it so that storagenodes will send the delete request to a piece Deleter,
which will process a "best-effort" delete asynchronously and return a
success message to the satellite.
There is a configurable number of max delete workers and a max delete
queue size.
Change-Id: I016b68031f9065a9b09224f161b6783e18cf21e5
Update unknown_audit_reputation_alpha and unknown_audit_reputation_beta.
Add test to verify that BatchUpdateStats properly modifies unknown audit
alpha/beta
Change-Id: I0d5f9cac96a99f64905cf575b772402db0756a9d
If a node is suspended and receives an unknown or failing audit,
disqualify them if the grace period (default 1w in production) has
passed.
Migrate the nodes table so any node that is currently suspended gets
unsuspended when the satellite starts up.
Change-Id: I7b81c68026f823417faa0bf5e5cb5e67c7156b82
Currently it was possible that PopAll returns 1010 items, then
makes one RPC call with 1000 items, then RPC call 10 items. Meanwhile,
there have been added 500 new items added to the queue.
This change ensures that we pull items from the queue early and
try to make rpc batches as large as possible.
Change-Id: I1a30dde9164c2ff7b90c906a9544593c4f1cf0e9
This reverts commit 105dc7acc6.
Reason for revert: Recent changes to the Postgres query plan seems to want to use this index now. Reverting until we have time to analyze what's happening.
Change-Id: I74b4b5a8f15c3850d8a958a29f51dbc80e7c282c
* Delete expired segments in expired segments service using metainfo
loop
* Add test to verify expired segments service deletes expired segments
* Ignore expired segments in checker observer
* Modify checker tests to verify that expired segments are ignored
* Ignore expired segments in segment repairer and drop from repair queue
* Add repair test to verify that a segment that expires after being
added to the repair queue is ignored and dropped from the repair queue
Change-Id: Ib2b0934db525fef58325583d2a7ca859b88ea60d
Replace most of old libuplink usages in testplanet. 100% migration will
be possible when we will be able to implement UploadWithClientConfig
with new libuplink.
Change-Id: I432d7d4917c7b67d46a058abd0a2a6a13f565ac4
Automatically attach attribution information to bucket during
BeginObject or CreateBucket when the UserAgent is set.
Change-Id: I405cb26c5a2f7394b30e3f2cf5d2214c8781eb8b
We want to avoid net/http dependency in errs2 package, hence we removed
http.ErrServerClosed from IgnoreCanceled and IsCanceled check. Now we
need to add that check explicitly to every http endpoint.
Change-Id: I62b1cc0a0a2d3b43301d713a7951e5022145f88f
This adds support for observers to join the loop together. This allows
to ensure that when multiple observers join, they will be part of the
same loop iteration.
Change-Id: Ie887d4cedfb074b65c782690a2c09c1704f56dfe
During testing it's possible to get into a scenario where all nodes are
offline and list of requests is empty.
Change-Id: I271c0ca2c72009244df13e8bc1441fcd5f3da9e0
* satellite: update log levels
Change-Id: I86bc32e042d742af6dbc469a294291a2e667e81f
* log version on start up for every service
Change-Id: Ic128bb9c5ac52d4dc6d6c4cb3059fbad73f5d3de
* Use monkit for tracking failed ip resolutions
Change-Id: Ia5aa71d315515e0c5f62c98d9d115ef984cd50c2
* fix compile errors
Change-Id: Ia33c8b6e34e780bd1115120dc347a439d99e83bf
* add request limit value to storage node rpc err
Change-Id: I1ad6706a60237928e29da300d96a1bafa94156e5
* we cant track storage node ids in monkit metrics so lets use logging to track that for expired orders
Change-Id: I1cc1d240b29019ae2f8c774792765df3cbeac887
* fix build errs
Change-Id: I6d0ffe058e9a38b7ed031c85a29440f3d68e8d47
Currently storj-sim relies on the log lines to be exactly the same,
when they change it cannot find the necessary information from log.
Change-Id: Ia039915ef3375a7cf60f107b2c05c958de15b6d5
Currently ListV2 loaded the whole data into memory, even when all the
data wasn't being used, using up more memory than needed.
Change-Id: I5846d979344729b447c108a6cc9f4227229ec981
Alpha=1 and beta=0 are the expected first values for any alpha/beta
reputation system we are using in the codebase. So we are removing the
configurability of these values.
Change-Id: Ic61861b8ea5047fa1438ea6609b1d0048bf0abc3
We want to increase our throughput for downtime estimation. This commit
adds the ability to reach out to multiple nodes concurrently for downtime
estimation. The number of concurrent routines is determined by a new config
flag, EstimationConcurrencyLimit. It also increases the default
EstimationBatchSize to 1000.
Change-Id: I800ce7ec1035885afa194c3c3f64eedd4f6f61eb
until we do a good job of cleaning them up, we should at least
not charge or pay people for them. nodes already locally delete
expired segments.
subsumes the tests in 1112.
Change-Id: I5961185764e02f6136b3231b44ecc75a9a8832c9
Whenever the node's reputation is updated, if its unknown audit
reputation is below the suspension threshold, its suspension field
is set to the current time. This could overwrite the previous
"suspendedAt" value resulting a node that never reaches the end of
its suspension.
Also log whenever a node is disqualified or its suspension status
changes
Change-Id: I5e8c8f1c46f66d79cb279b5b16a84fe03f533deb
Reduce the number of non-methods to reduce funcs in the namespace also
combine a func to slightly condense the code more.
Change-Id: Ifbe728eb8c8ca4c981df648decd259c2097b6b40
* Add migration to storagenode reputation table to add suspended
timestamp
* Send suspended info to storagenode from satellite nodestats endpoint
* Add suspended status to storagenode api
* Add an indicator on the storagenode dashboard informing operator of
the satellites the node is suspended on
Change-Id: Ie3669f6069cc0258ba76ec99d17006e1b5fd9c8a
potential encryption overhead.
This is the same approach we have for validating remote segment size.
https://storjlabs.atlassian.net/browse/USR-619
Change-Id: I2597ee734313a3068fd986001680bbedbf1bed2a
Adds a test to make sure that the correct amount of total nodes,
reputable nodes, and new nodes are returned by SelectStorageNodes
in different cases.
Change-Id: I0939159600afde8a46c35735f1edf0576fcdb4cd
This adds new endpoint /api/user/{user-email} which allows to get the
projects where the user is a member.
It also moves existing endpoint:
/project/{projectid}/limit -> /api/project/{projectid}/limit
To avoid future conflicts for displaying pages.
Change-Id: I5efe3e1c8f79894c136f92ed815f635a34ba6f98
size with BeginObject
Such solution will add one round trip to satellite during upload so for
now we are reverting this until we will have solution for this.
Change-Id: Ic2d826448ab7b0318cd6922df05deee9167cf2f0
We have been using the SQL expression `name='(*Verifier).Verify' AND
error_name='not enough shares for successful audit'` thus far to detect
cases of this problem and alert on them. Unfortunately, since this
rarely (hopefully never) happens, influxdb has no data for most of the
auditor instances, and when it has no data for a time series, it returns
no columns either. This makes Redash upset when it tries to perform a
query for an alert and can't find the column whose value it expects to
check.
This change should make it so zero values are reported when the problem
has not happened, and higher values when it has.
Change-Id: I79e5e000f879678b661dac88caae1e2915b39ab1
there are a subset of storagenodes hammering the satellite with
expired orders. if we check for expiration first, we don't have
to do a bunch of pointless signature verification. since a && b
is equal to b && a, we can order these checks in any way we want
and have it still be correct.
Change-Id: I6ffc8025c8b0d54949a1daf5f5ea1fed9e213372
BeginObject response
We want to control inline segment size and segment size on satellite
side. We need to return such information to uplink like with redundancy
scheme.
Change-Id: If04b0a45a2757a01c0cc046432c115f475e9323c
all permissions
Without read and list permissions BeginObjectDelete won't return error
if occurs. This was breaking Batch processing because there was
assumption that without error response will be always not nil.
https://storjlabs.atlassian.net/browse/SM-590
Change-Id: I0fc9539e429110a660eb28725b266d5e4771d198
uuid.UUID implements driver.Value so it can be directly used as a
scannable result.
Replace uses of dbutil.BytesToUUID with uuid.FromBytes.
Change-Id: I51a670185ceb3cc2199d5aa2b76bc3fc191ca8fe
