this change tries really hard to never have all of the storage node
rollups in memory at the same time, up until the rollups are actually
getting summed together.
Change-Id: If67f49e7d71106798d996a6850b3e48671bd9e18
Previously uplink register only accepted a fully serialized access grant.
This is kind of annoying, I changed it so that it could also use access names.
Change-Id: If6d4d1baa8d4fb3d87fdedb895d459fa12743f1a
Firstly, this changes the repair functionality to return Canceled errors
when a repair is canceled during the Get phase. Previously, because we
do not track individual errors per piece, this would just show up as a
failure to download enough pieces to repair the segment, which would
cause the segment to be added to the IrreparableDB, which is entirely
unhelpful.
Then, ignore Canceled errors in the return value of the repair worker.
Apparently, when the worker returns an error, that makes Cobra exit the
program with a nonzero exit code, which causes some piece of our
deployment automation to freak out and page people. And when we ask the
repair worker to shut down, "canceled" errors are what we _expect_, not
an error case.
Change-Id: Ia3eb1c60a8d6ec5d09e7cef55dea523be28e8435
For coordinating with other processes it can be useful to wait until
another process is accepting requests on an address.
Change-Id: Id623ed815149f14f9f0344e2f396ab70fc4dec6a
Previously, we created a new file to use for directory verification
every time the storage node starts. This is not helpful if the storage node
points to the wrong directory when restarting. Now we will only create the file
on setup. Now the file should be created only once and will be verified at
runtime.
Change-Id: Id529f681469138d368e5ea3c63159befe62b1a5b
Previously, we ran setup if no config file was found in the expected dir.
However, there may be situations where a previously set up node's files
may be unreachable. In this case, we would prefer to exit with an error
rather than assume this node needs to be initialized.
The solution here is to add a new env variable to call the setup command.
If SETUP == true, the node will setup, but not run. If SETUP != true,
the node will run and not setup.
If a previously set up node runs with SETUP, it will return an error.
If a node runs without an initial SETUP, it will return an error.
Change-Id: Id2c796ec3d43f2add5e5f34fb777a563eae59f2f
This change forward-proofs the satellite selection on uplink setup.
Currently we have hard-coded response values, so if we add satellites in
the future we have to remember to update the switch statement below. In
this change it should work for any number of future satellites.
Change-Id: I3250fe2154dbeb4820efadf49780b20c4b7a3408
This PR fixes below issues:
1. remove concurrent installation for various versions
We were doing this to decrease the amount of execution time the versions test.
However, it's returning incorrect exit code when there's an
installation failure.
Right now, we are only installing two versions of `storj-sim` and
the rest are only doing uplink cli installation. The performance of
this test should be hugely impacted by the setup step now.
2. only remove release settings instead of deleting the entire file
uplink CLI is referrencing `private/version` package. Therefore, we
cannot delete it
3. add back `GATEWAY_0_API_KEY` in storj-sim
In order to set up older version of uplink cli, we need access to
the gate way api key.
Change-Id: Ia3c37c197bd007b6e1f7c2bd71adde42181d46f0
As part of the Metainfo Refactoring, we need to make the Metainfo Loop
working with both the current PointerDB and the new Metabase. Thus, the
Metainfo Loop should pass to the Observer interface more specific Object
and Segment types instead of pb.Pointer.
After this change, there are still a couple of use cases that require
access to the pb.Pointer (hence we have it as a field in the
metainfo.Segment type):
1. Expired Deletion Service
2. Repair Service
It would require additional refactoring in these two services before we
are able to clean this.
Change-Id: Ib3eb6b7507ed89d5ba745ffbb6b37524ef10ed9f
Check binary version on self-update instead of current process
version to prevent updating already updated binary.
Add info logs to report current version of service beeing
updated.
Change-Id: Id22dee188a99d6d45db925104786f49f5d3a61ae
This makes it possible to remove of this obsolete flag from the
multi-tenant gateway.
As a consequence, displaying the GATEWAY_0_ACCESS env var will always
require a running storj-sim. Until now, it was required only the first
time. Then the value was stored in the 'access' config. But this is now
not possible anymore.
The changes in StripeMock are required to fix failures in integration
tests. StripeMock is in-memory and its data does not survive restarts of
storj-sim. The second and following starts of storj-sim had invalid
state of StripeMock, which failed requests that were required to
populate the GATEWAY_0_ACCESS env var. The changes in StripeMock makes
it repopulate the Stripe customers from the database.
Change-Id: I981a208172b76577f12ecdaae485f5ae4ea269bc
log.Fatal immediately terminates the program without running any defers.
We should properly close all the services and databases.
Change-Id: I5e959cef3eafedeacb3a2062e3da47e8d04e8e75
Sadly the build process with this command is very, very flaky and often fails pulling down curl via apk.
As we currently do not need it anyway, it is safe to remove.
Change-Id: I8a396c560d61a7fe6324560152a68c07c6b31638
The VerifyPieceHashes method has a sanity check for the number pieces to
be removed from the pointer after the audit for verifying the piece
hashes.
This sanity check failed when we executed the command on the production
satellites because the Verify command removes Fails and PendingAudits
nodes from the audit report if piece_hashes_verified = false.
A new temporary UsedToVerifyPieceHashes flag is added to
audits.Verifier. It is set to true only by the verify-piece-hashes
command. If the flag is true then the Verify method will always include
Fails and PendingAudits nodes in the report.
Test case is added to cover this use case.
Change-Id: I2c7cb6b12029d52b2fc565365eee0826c3de6ee8
Remove usage of --non-interactive flag. It is not provided (and
necessary) by the multitenant S3 gateway anymore.
ACCESS_KEY and SECRET_KEY env vars are not provided anymore as they are
not generated by the multitenant S3 gateway.
Change-Id: I3ecfb92110e31ae13977de3899dad273daae6c1e
Jira: https://storjlabs.atlassian.net/browse/PG-69
There are a number of segments with piece_hashes_verified = false in
their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. Most probably, this happened due to a bug we had in the
past. We want to verify them before executing the main migration to
metabase. This would simplify the main migration to metabase with one
less issue to think about.
Change-Id: I8831af1a254c560d45bb87d7104e49abd8242236
Jira: https://storjlabs.atlassian.net/browse/PG-67
There are a number of old-style objects (without the number of segments
in their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. We want to migrate their metadata to contain the number of
segments before executing the main migration to metabase. This would
simplify the main migration to metabase with one less issue to think
about.
Change-Id: I42497ae0375b5eb972aab08c700048b9a93bb18f
Fix case where line is larger than maxline and writer ended up in an
infinite loop trying to buffer more data.
Change-Id: I243da738b331279d6bf27255778b5798e7f37f95
This PR updates `uplink rb --force` command to use the new libuplink API
`DeleteBucketWithObjects`.
It also updates `DeleteBucket` endpoint to return a specific error
message when a given bucket has concurrent writes while being deleted.
Change-Id: Ic9593d55b0c27b26cd8966dd1bc8cd1e02a6666e
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.
Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
Jira: https://storjlabs.atlassian.net/browse/USR-822
This the last step of dropping these 2 db tables. It also deletes all
code associate with them.
Change-Id: I8be840dc2a7be255cf6308c9434b729fe4d9391e
Add a config so that some percent of users require credit cards /
account balances
in order to create a project or have a promotional coupon applied
UI was updated to match needed paywall status
At this point we decided not to use a field to store if a user is in an
A/B
test, and instead just use math to see if they're in a test. We decided
to use MD5 (because its in Postgres too) and User UUID for that math.
Change-Id: I0fcd80707dc29afc668632d078e1b5a7a24f3bb3
To prevent storagenode from implicitly recreating missing dbs and storage,
as such behaviour leads to audit failures. Do not allow storagenode to
start if any of dbs or storage is missing, corrupted, or dedicated storage disk is
unmounted, to get downtime instead.
Change-Id: Ic64e1f0ff4d8ef5b2fddbe7a7e53df4f4bd8652e
We passed in revocationDB and metainfoDB for no reason.
Lets remove it from the dependency list to further reduce the footprint.
Change-Id: Ic0317bb92670fbd305d4a8b0ed1cb82858e2f6d3
Jira: https://storjlabs.atlassian.net/browse/USR-821
The `migrate-credits` billing command checks the available credits
balance for all users and moves it to the Stripe balance by creating a
new credit balance transaction.
Change-Id: Iafc7b95a4edad47f7c145a22e210f8c821ac183d
Add a long description to the graceful exit command to clearly mention
that the command is interactive asking which satellite the SNO wants to
exit.
Change-Id: Icd4056a470e707322f600133e63d9dc56eb877b7
When a request comes in on the satellite api and we validate the
macaroon, we now also check if any of the macaroon's tails have been
revoked.
Change-Id: I80ce4312602baf431cfa1b1285f79bed88bb4497
when a user runs `uplink share`, they get a bunch of results back,
given their configuration and existing access. one of the results
is a URL for in-browser sharing and hosting of the file.
first off, we want to make sure this URL is read only. we want to
avoid a situation where someone post this URL to some public
location, not realizing the access allows writes or deletes. if
a user really wants a URL with write/delete access, they can
construct it themselves.
secondly, we want to make sure the url is sharing a single path or
path prefix. having a url for multiple paths/path prefixes
indepedently again can be constructed of course, but should not
be the default behavior
Change-Id: I2ca2ebeea9f1c7d4bfbd7a437a32dc7a3b2a32cc
Reverts https://review.dev.storj.io/c/storj/storj/+/2074
That change broke all billing commands with `sql: database is closed`.
Fixing the issue does not make sense as the whole setup of billing
commands is now error-prone. It's better to revert it.
Change-Id: Id13f817b73c7313ba60181f740b0712e4bdce077
setup
We don't have default ports as a part of configuration anymore because
satellite-addr flag was removed.
Change-Id: Ibf9fc4b399beaf51ebb9461de2d8994a322f9686
This changeset allows a user agent string to be set during uplink setup, which
is thereafter used for partner value attribution. EG
uplink setup --client.user-agent ”MyCompany”
Change-Id: Iefa8755fccc06acb8a303a342b943cece44a81f7
Remove unneeded observer's tests cases after the changes that enhanced
the segment-reaper not to be limited to objects up to 65 segments.
Also remove some tests cases that were already covered by the
TestObserver_processSegment_from_to test function.
Change-Id: I2385b406b50f7810ed22d3297b903a993f83fcfe
Viper has a feature/bug where all YAML config keys are cast
to lowercase (see https://github.com/spf13/viper/issues/260
and https://github.com/spf13/viper/issues/411).
Since we use Viper to load our config values, it doesn't seem
like there's an easy way to preserve case sensitivity for the
access names chosen by users right now. Adding this prompt
should help user experience by clarifying that all access
names must be lowercase.
Change-Id: I47e8344bb0ca7e78458405496f20e78e3c9f9a88
Rename a test function to indicate the function that it actually tests
rather than indicating the function that calls the function under test.
Change-Id: I2c1fe165e3acf952993a9a65dfbfbdcda0d1cccc
After the segment-reaper was enhanced to support objects with any number
of segments, the test helper function to generate test data doesn't have
to support to generate objects with a number of segments up to or over
the previous limit.
The commit remove that unnecessary test logic.
Change-Id: I2897c5a96fb133f61de2cdb0ef7d13ee5e0151e8
This allows to seeing logs in the output of the invoice commands.
Existing ensure-stripe-customer commands is moved from the 'reports' to
the new 'billing' root command.
Change-Id: I752c7ab6ca59bfac8e0f174a45d2ab45fc18e467
able to cover more testing scenarios
Currently, its hard to implement test suite for payments because
mockpayments is on to high level and we cannot emulate many things e.g.
adding credit card. This change is first to be able to add mock for
Stripe client and do more granular tests.
Change-Id: Ied85d4bd0642debdffe1161657c1e475202e9d23
To avoid including multiple months in a single invoice, we need all
inspector's invoice commands to run in for specific period.
See https://storjlabs.atlassian.net/browse/USR-725
Change-Id: I3637dc189234f02350daca8d897c21765762ea55
See https://storjlabs.atlassian.net/browse/SM-752
These changes allow us to change the log level at runtime through a handler off of the debug endpoint.
Examples of changing the log level on storj-sim
To get the current level for the satellite api process:
curl -XGET 'http://127.0.0.1:10009/logging' --header 'Content-Type: text/plain'
To change the log level:
curl -XPUT 'http://127.0.0.1:10009/logging' --header 'Content-Type: text/plain' --data-raw '{"level":"error"}'
Change-Id: I05d164b290929fa06b6d78c01075ee41f8238044
Reorganize some operations in the observer.processSegment method:
* to minimal reduce the memory usage removing the segments of the
objects marked as skipped. Skipped objects aren't discarded of the
analysis stage so the segments aren't needed.
* returns earlier when an object is skipped because isn't needed a
further processing.
Change-Id: I210a26c394477ee411ff7f640507dcc07733a47f
Rename a test name and an error class because the bitmask was renamed to
bitArray in a previous commit, however, they weren't updated.
Change-Id: I92afcf747dec9e0a15d4c59b896e07b942f3518b
The bitArray.IsSequence method had a bug that caused that sometimes the
test "Bitmask/IsSequence/sequence starts at other index than 0" to fail
due to it uses random values.
The test mostly found a corner case, I've added new tests to catch the
bug and then apply the fix.
Change-Id: If01dc07006d261ba40bbd99d36ef776e09ed3efc
Change the bitmask used by segment reaper to use []byte rather than uint64
This passes tests but I have literally no clue how to integration test this.
Change-Id: I393f4598b27cae6e427da2190dd3109bca721c34
Currently uploads can cause a lot of IOPS, reduce this by introducing a
in-memory buffer on-top of the file.
Change-Id: I5f4e3e01c0a36258271d180b922107de447bcb59
CreateTables hasn't been quite true for a while now, rename to
MigrateToLatest to be clearer in it's behavior.
Change-Id: Ida48e95122a5d9b7a814e922d3698e00024a2ba7
when tracing is enabled, we should also set sampling rate to
a non-zero value. For now, we will set it to 1.
Uplink CLI users should be able to override it with the sample
flag.
Change-Id: I8bcf514fb14c2a1c4349b7957dd24ec23e4a85e5
In cases like the segment reaper script connecting to the metainfodb,
we don't want a db migration to happen automatically when we call
metainfo.NewStore. This adds MigrateToLatest method for postgreskv
and cockroackv, and calls MigrateToLatest in places where NewStore used
to create tables.
Change-Id: I682d0f26d609af0601dfdb32a24866cdf5d32a7e
Previously we are using tracing.sampled to be the switch for turning on/off tracing.
However we would like to separate sampling rate from being the switch,
so we can set sampling rate to be 0 but still intialize tracing for
satellite and storagenodes
Change-Id: I27e6ba25ea6f6b612b4e1a57cf1301889ded41ec
We want to make tracing to be opt-in.
For now, we will use `tracing.sample` as the toggle config to enable or
disable tracing and default to sample every traces from uplink cli.
If user wants to change the default sampling rate, they can do so by
using the `--tracing.sample` flag to override the default value
Change-Id: I6f25dac0f43024c50a8aaf6c549e6a514211f834
currently production uses a different application suffix for gc
services, so chronograf can distinguish between gc processes and core
processes, but it'd be nice to be a bit more consistent with repairers
and api servers
Change-Id: Icb96fed006c59d7afd730317d35636a6e4573b58
Currently storj-sim relies on the log lines to be exactly the same,
when they change it cannot find the necessary information from log.
Change-Id: Ia039915ef3375a7cf60f107b2c05c958de15b6d5
uuid.UUID implements driver.Value so it can be directly used as a
scannable result.
Replace uses of dbutil.BytesToUUID with uuid.FromBytes.
Change-Id: I51a670185ceb3cc2199d5aa2b76bc3fc191ca8fe
Previous split to a storj.io/private repository broke tag-release.sh
script. This is the minimal temporary fix to make things work.
This links the build information to specified variables and sets them
inline. This approach, of course, is very fragile.
Change-Id: I73db2305e6c304146e5a14b13f1d917881a7455c
* debug
* traces
* cfgstruct
* process
Package `storj/private/version` will be removed as a separate change.
Change-Id: Iadc40faa782e6225513b28218952f02d9c240a9f
