In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop support for missing sched_ext_ops.dump*(). The
open helper macros now check the existence of the fields and abort if
missing.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop support for missing sched_ext_ops.tick(). The
open helper macros now check the existence of the field and abort if
missing.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop support for missing sched_ext_ops.exit_dump_len.
The open helper macros now check the existence of the field and abort if
missing.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop support for missing sched_ext_ops.hotplug_seq.
The open helper macros now check the existence of the field and abort if
missing.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_scx_bpf_cpuperf_*(). The open helper
macros now check the existence of scx_bpf_cpuperf_cap() and abort if not.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_HAS_CPUMASKS(). The open helper macros
now check the existence of scx_bpf_nr_cpu_ids() and abort if not.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_scx_bpf_dump(). The open helper macros
now check the existence of scx_bpf_dump_bstr() and abort if not.
While at it, reorder the min requirement checks so that newly added ones are
up top to make testing easier.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_scx_bpf_exit(). The open helper macros
now check the existence of scx_bpf_exit_bstr() and abort if not.
Fix a potential race condition that might lead to a task being
dispatched without kicking the target CPU, which could result in a
potential stall.
With this applied, scx_rustland has been running without any stall for
about 18 hours on a system where the issue was previously quite easy to
reproduce.
Moreover, clarify a couple of comments in the dispatch path.
This fixes issue #353.
Tested-by: SoulHarsh007 <harsh.peshwani@outlook.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_SCX_KICK_IDLE. The open helper macros
now check the existence of SCX_KICK_IDLE and abort if not.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_scx_bpf_switch_call(). The open helper
macros now check the existence of SCX_OPS_SWITCH_PARTIAL and abort if not.
scx_ops_open!() and scx_ops_attach!() could return the calling function
after an error, which can be surprising. Forutnately, as all the current
callers are either unwrapping or returning on error, the surprising behavior
is currently not very noticeable.
Fix it by breaking out of the macro block on errors.
The same change was previously applied with commit 8820af8d
("scx_rustland: enable user-space scheduler to preempt other tasks").
However, it was reverted in commit 732ba490 ("scx_rustland: avoid using
SCX_ENQ_PREEMPT") with the introduction of the global dynamic time
slice (inversely proportional to the number of running tasks), because
it already provided sufficient context switch opportunities, negating
any advantage of the preemption.
With the introduction of the virtual time slice in commit 6f4cd853
("scx_rustland: introduce virtual time slice"), re-introducing the
ability for the user-space scheduler to preempt other tasks now appears
beneficial again.
As confirmed by experimental results, this change helps prevent
potential audio cracking issues and enhances overall system
responsiveness, resulting in a 4-5% increase in fps performing the
usual benchmark of gaming while recompiling the kernel.
Tested-by: SoulHarsh007 <harsh.peshwani@outlook.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Tasks dispatched directly using SCX_DSQ_LOCAL may receive excessively
high priority compared to those dispatched by the user-space scheduler.
To avoid this priority disparity, dispatch tasks to the per-CPU DSQs
using direct dispatch and reserve SCX_DSQ_LOCAL for per-CPU kthreads
only.
Tested-by: Tested-by: SoulHarsh007 <harsh.peshwani@outlook.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
This change adds the CPU frequency transition latency from the
`cpuinfo_transition_latency` from sysfs. The value of this field is
described [cpufreq
docs](https://www.kernel.org/doc/Documentation/cpu-freq/user-guide.txt).
On supported systems it returns the CPU frequency transition latency in
nanoseconds. The goal of this change is so that in the future schedulers
can use this data to make better frequency scaling decisions.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
- scx_utils: Replace kfunc_exists() with ksym_exists() which doesn't care
about the type of the symbol.
- scx_layered: Fix load failure on kernels >= v6.10-rc due to
scheduler_tick() -> sched_tick rename. Attach the tick fentry function to
either scheduler_tick() or sched_tick().
Make restart handling with user_exit_info simpler and consistently use the
load and report macros consistently across the rust schedulers. This makes
all schedulers automatically handle auto restarts from CPU hotplug events.
Note that this is necessary even for scx_lavd which has CPU hotplug
operations as CPU hotplug operations which took place between skel open and
scheduler init can still trigger restart.
As reported in #319, we may get a build failure in presence of musl,
that requires additional parameters in sched_param.
Fix by adding a proper conditional to support both gnu libc and musl
libc.
This fixes#319.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The setting of ops->dispatch_max_batch leads to a too large allocated
size for percpu allocator, and it will be unhappy if we want a size
larger than PCPU_MIN_UNIT_SIZE. Reduce MAX_ENQUEUED_TASKS for fix.
Implement a second-chance migration in select_cpu(): after a task has
been dispatched directly do not try to migrate it immediately on a
different CPU, but force it to stay on prev_cpu for another round.
This seems quite effective on certain architectures (such as on a system
with 11th Gen Intel(R) Core(TM) i7-1195G7 @ 2.90GHz), and it can provide
noticeable benefits with gaming or WebGL applications (such as
https://webglsamples.org/aquarium/aquarium.html) under regular workload
conditions (around +5% fps).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The shared DSQ is typically used to prioritize tasks and dispatch them
on the first CPU available, so consume from the shared DSQ before the
local CPU DSQ.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Provide a knob in scx_rustland_core to automatically turn the scheduler
into a simple FIFO when the system is underutilized.
This choice is based on the assumption that, in the case of system
underutilization (less tasks running than the amount of available CPUs),
the best scheduling policy is FIFO.
With this option enabled the scheduler starts in FIFO mode. If most of
the CPUs are busy (nr_running >= num_cpus - 1), the scheduler
immediately exits from FIFO mode and starts to apply the logic
implemented by the user-space component. Then the scheduler can switch
back to FIFO if there are no tasks waiting to be scheduled (evaluated
using a moving average).
This option can be enabled/disabled by the user-space scheduler using
the fifo_sched parameter in BpfScheduler: if set, the BPF component will
periodically check for system utilization and switch back and forth to
FIFO mode based on that.
This allows to improve performance of workloads that are using a small
amount of the available CPUs in the system, while still maintaining the
same good level of performance for interactive tasks when the system is
over commissioned.
In certain video games, such as Baldur's Gate 3 or Counter-Strike 2,
running in "normal" system conditions, we can experience a boost in fps
of approximately 4-8% with this change applied.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Simplify the CPU idle selection logic relying on the built-in logic.
If something can be improved in this logic it should be done in the
backend, changing the default idle selection logic, rustland doesn't
need to do anything special here for now.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
This merge included additional commits that were supposed to be included
in a separate pull request and have nothing to do with the fifo-mode
changes.
Therefore, revert the whole pull request and create a separate one with
the correct list of commits required to implement this feature.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The shared DSQ is typically used to prioritize tasks and dispatch them
on the first CPU available, so consume from the shared DSQ before the
local CPU DSQ.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Provide a knob in scx_rustland_core to automatically turn the scheduler
into a simple FIFO when the system is underutilized.
This choice is based on the assumption that, in the case of system
underutilization (less tasks running than the amount of available CPUs),
the best scheduling policy is FIFO.
With this option enabled the scheduler starts in FIFO mode. If most of
the CPUs are busy (nr_running >= num_cpus - 1), the scheduler
immediately exits from FIFO mode and starts to apply the logic
implemented by the user-space component. Then the scheduler can switch
back to FIFO if there are no tasks waiting to be scheduled (evaluated
using a moving average).
This option can be enabled/disabled by the user-space scheduler using
the fifo_sched parameter in BpfScheduler: if set, the BPF component will
periodically check for system utilization and switch back and forth to
FIFO mode based on that.
This allows to improve performance of workloads that are using a small
amount of the available CPUs in the system, while still maintaining the
same good level of performance for interactive tasks when the system is
over commissioned.
In certain video games, such as Baldur's Gate 3 or Counter-Strike 2,
running in "normal" system conditions, we can experience a boost in fps
of approximately 4-8% with this change applied.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Simplify the CPU idle selection logic relying on the built-in logic.
If something can be improved in this logic it should be done in the
backend, changing the default idle selection logic, rustland doesn't
need to do anything special here for now.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
scx_rustland has a function called get_cpu_owner() in BPF which
currently has no callers. There's nothing wrong with the function, but
it causes a warning due to an unused function. Let's just annotate it
with __maybe_unused to tell the compiler that it's not a problem.
Signed-off-by: David Vernet <void@manifault.com>
C SCX_OPS_ATTACH() and rust scx_ops_attach() macros were not calling
.attach() and were only attaching the struct_ops. This meant that all
non-struct_ops BPF programs contained in the skels were never attached which
breaks e.g. scx_layered.
Let's fix it by adding .attach() invocation the the attach macros.
In order to make it easy for schedulers to use the hotplug_seq feature that's
available in recent kernels, we'll need to provide a macro wrapper so that we
can support the feature with backwards compatibility. This adds scx_ops_open!()
to abstract that. Any scheduler that uses scx_ops_open()! will be exited if a
hotplug event happens between opening the skeleton, and loading it.
Signed-off-by: David Vernet <void@manifault.com>
Now that the kernel exports the SCX_ECODE_ACT_RESTART exit code, we can
remove the custom hotplug logic from scx_rusty, and instead rely on the
built-in logic from the kernel. There's still a corner case that we're not
honoring: when a hotplug event happens on the init path. A future change will
address this as well.
Signed-off-by: David Vernet <void@manifault.com>
Introduce a low-power mode to force the scheduler to operate in a very
non-work conserving way, causing a significant saving in terms of power
consumption, while still providing a good level of responsiveness in the
system.
This option can be enabled in scx_rustland via the --low_power / -l
option.
The idea is to not immediately re-kick a CPU when it enters an idle
state, but do that only if there are no other tasks running in the
system.
In this way, latency-critical tasks can be still dispatched immediately
on the other active CPUs, while CPU-bound tasks will be forced to spend
more time waiting to be scheduled, basically enforcing a special CPU
throttling mechanism that affects only the tasks that are not latency
critical.
The consequence is a reduction in the overall system throughput, but
also a significant reduction of power consumption, that can be useful
for mobile / battery-powered devices.
Test case (using `scx_rustland -l`):
- play a video game (Terraria) while recompiling the kernel
- measure game performance (fps) and core power consumption (W)
- compare the result of normal mode vs low-power mode
Result:
Game performance | Power consumption |
------------+-----------------+-------------------+
normal mode | 60 fps | 6W |
low-power mode | 60 fps | 3W |
As we can see from the result the reduction of power consumption is
quite significant (50%), while the responsiveness of the game (fps)
remains the same, that means battery life can be potentially doubled
without significantly affecting system responsiveness.
The overall throughput of the system is, of course, affected in a
negative way (kernel build is approximately 50% slower during this
test), but the goal here is to save power while still maintaining a good
level of responsiveness in the system.
For this reason the low-power mode should be considered only in
emergency conditions, for example when the system is close to completely
run out of power or simply to extend the battery life of a mobile device
without compromising its responsiveness.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Schedulers and the kernel can include an exit code when exiting a scheduler.
There are some built-in codes that can be specified: SCX_ECODE_RSN_HOTPLUG,
and SCX_ECODE_ACT_RESTART. Some schedulers may want to check the exit
code against these values, so let's export them from user_exit_info.rs.
We use lazy_static so that we can read the values for the enum for the
currently-running kernel.
Signed-off-by: David Vernet <void@manifault.com>
The comment that describes rustland_update_idle() is still incorrectly
reporting an old implemention detail. Update its description for better
clarity.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Change the BPF CPU selection logic as following:
- if the previously used CPU is idle, keep using it
- if the task is not coming from a wait state, try to stick as much as
possible to the same CPU (for better cache usage)
- if the task is waking up from a wait state rely on the sched_ext
built-int idle selection logic
This logic can be completely disabled when the full user-space mode is
enabled. In this case tasks will always be assigned to the previously
used CPU and the user-space scheduler should take care of distributing
them among the available CPUs.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Some users are running with NUMA disabled, which makes sense given that it's
useless in a lot of contexts. Let's make the Topology crate assume a default
node with ID 0 in such cases.
Signed-off-by: David Vernet <void@manifault.com>
Add a method to TopologyMap to get the amount of online CPUs.
Considering that most of the schedulers are not handling CPU hotplugging
it can be useful to expose also this metric in addition to the amount of
available CPUs in the system.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Drop the global effective time-slice and use the more fine-grained
per-task time-slice to implement the dynamic time-slice capability.
This allows to reduce the scheduler's overhead (dropping the global time
slice volatile variable shared between user-space and BPF) and it
provides a more fine-grained control on the per-task time slice.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
