Add a parameter to disable topology awareness. This is useful when
trying to compare the scheduling performance of topology aware
scheduling compared to the previous scheduling strategy.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
When the previous CPU for a task is not known do not fall back to
dispatching to CPU 0, use the current CPU.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Add a per cpu counter offset to round robin when iterating on layers.
This is to make selection from different layers more fair.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Add a layer match based on either the effective user id or the effective
group id. This allows for creating layers for individual users or
groups.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Add NUMA node topology awareness for scx_layared. This borrows some of
the NUMA handling from scx_rusty and allows layers to set a node mask.
Different layer kinds will use the node mask differently.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Non-kthreads with custom affinities in non-open layers are dispatched into a
LO_FALLBACK_DSQ, with the idea being that they're penalized for their custom
affinities. When a host is fully utilized, these tasks can end up being starved
due to LO_FALLBACK_DSQ being consumed only when there are no other layers to
consume from. In internal workloads at Meta, we've observed that this can
happen in practice.
Longer term, we can probably address this by implementing layer weights and
applying that to fallback DSQs to avoid starvation. For now, let's just
dispatch them to HI_FALLBACK_DSQ to avoid this starvation issue.
Signed-off-by: David Vernet <void@manifault.com>
Refactor the main module for scx_layered to move metrics into a separate
module. This change does no functional differences, only code structure.
This will make it a little easier to navigate the logic in the main
scheduler code.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Update libbpf-rs & libbpf-cargo to 0.24. Among other things, generated
skeletons now contain directly accessible map and program objects, no
longer necessitating the use of accessor methods. As a result, the risk
for mutability conflicts is reduced greatly.
Signed-off-by: Daniel Müller <deso@posteo.net>
sched_ext is about to be merged upstream. There are some compatibility
breaking changes and we're making the current sched_ext/for-6.11
1edab907b57d ("sched_ext/scx_qmap: Pick idle CPU for direct dispatch on
!wakeup enqueues") the baseline.
Tag everything except scx_mitosis as 1.0.0. As scx_mitosis is still in early
development and is currently temporarily disabled, only the patchlevel is
bumped.
Sync from sched_ext/for-6.11 1edab907b57d ("sched_ext/scx_qmap: Pick idle
CPU for direct dispatch on !wakeup enqueues")
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext.git for-6.11
- cgroup support hasn't landed in the upstream kernel yet. This most likely
will happen in a few weeks. For the time being, disable scx_flatcg,
scx_pair and scx_mitosis.
- Compat macro for DSQ task iterator dropped. This is now a part of
the baseline.
- scx_bpf_consume() isn't upstream yet. BPF interfacing side is still being
discussed. Dropped example usage from tools/sched_ext. None of the
practical schedulers use it, so this should be fine for now.
- scx_bpf_cpu_rq() added.
- AUTOATTACH workaround for newer libbpf versions added.
With commit 5d20f89a ("scheds-rust: build rust schedulers in sequence"),
schedulers are now built serially one after the other to prevent meson
and cargo from forking NxN parallel tasks.
However, this change has made building a single scheduler much more
cumbersome, due to the chain of dependencies.
For example, building scx_rusty using the specific meson target would
still result in all schedulers being built, because they all depend on
each other.
To address this issue, introduce the new meson build option
`serialize=true|false` (default is false).
This option allows to disable the schedulers' build chain, restoring the
old behavior.
With this option enabled, it is now possible to build just a single
scheduler, parallelizing the cargo build properly, without triggering
the build of the others. Example:
$ meson setup build -Dbuildtype=release -Dserialize=false
$ meson compile -C build scx_rusty
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_scx_bpf_cpuperf_*(). The open helper
macros now check the existence of scx_bpf_cpuperf_cap() and abort if not.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_HAS_CPUMASKS(). The open helper macros
now check the existence of scx_bpf_nr_cpu_ids() and abort if not.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_SCX_KICK_IDLE. The open helper macros
now check the existence of SCX_KICK_IDLE and abort if not.
In preparation of upstreaming, let's set the min version requirement at the
released v6.9 kernels. Drop __COMPAT_scx_bpf_switch_call(). The open helper
macros now check the existence of SCX_OPS_SWITCH_PARTIAL and abort if not.
- pick_idle_cpu() was putting idle_smtmask that it didn't acquire.
- layered_enqueue() was unnecessarily entering preemption path after finding
an idle CPU.
- No need to test whether scx_bpf_get_idle_cpu/smtmask() return NULL. They
never do.
- Relocate cctx->yielding test into keep_runinng() from its caller.
Currently, when preempting, searching for the candidate CPU always starts
from the RR preemption cursor. Let's first try the previous CPU the
preempting task was on as that may have some locality benefits.
When a task is being enqueued outside wakeup path, ops.select_cpu() isn't
called, so we can end up in a situation where a newly enqueued task keeps
waiting in one of the DSQs while there are idle CPUs. Factor out idle CPU
selection path into pick_idle_cpu() and call it from the enqueue path in
such cases. This problem is shared across schedulers and likely needs a more
generic solution in the future.
yield(2) currently gives up the entire slice. Add "yield_ignore" layer
parameter which can modulate the magnitude of yiedling. When 1.0, yields are
completely ignored. 0.5, only half worth of the full slice is given up and
so on.
Currently, a task which yields is treated the same as a task which has run
out its slice. As the budget charged to a task is calculated from wall clock
time, a repeatedly yielding task can stay at the top of the queue for quite
a while hogging the CPU and spiking the number of scheduling events.
Let's add explicit yield support. An yielding task is now always charged the
full slice and not allowed to keep running on the same CPU.
The keep_running path relies on the implicit last task enqueue which makes
the statistics a bit difficult to track. Let's make the enqueue path
comprehensive:
- Set SCX_OPS_ENQ_LAST and handle the last runnable task enqueue explicitly.
- Implement layered_cpu_release() to re-enqueue tasks from a CPU preempted
by a higher pri sched class and handle the re-enqueued tasks explicitly in
layered_enqueue().
- Add more statistics to track all enqueue operations.
When a task exhausts its slice, layered currently doesn't make any effort to
keep it on the same CPU. It dispatches the next task to run and then
enqueues the running one. This leads to suboptimal behaviors. e.g. When this
happens to a task in a preempting layer, the task will most likely find an
idle CPU or a task to preempt and then migrate there causing a completely
unnecessary migration.
This patch layered_dispatch() test whether the current task should keep
running on the CPU and then skip dispatching to keep the task running. This
behavior depends on the implicit local DSQ enqueue mechanism which triggers
when there are no other tasks to run.
- scx_utils: Replace kfunc_exists() with ksym_exists() which doesn't care
about the type of the symbol.
- scx_layered: Fix load failure on kernels >= v6.10-rc due to
scheduler_tick() -> sched_tick rename. Attach the tick fentry function to
either scheduler_tick() or sched_tick().
Make restart handling with user_exit_info simpler and consistently use the
load and report macros consistently across the rust schedulers. This makes
all schedulers automatically handle auto restarts from CPU hotplug events.
Note that this is necessary even for scx_lavd which has CPU hotplug
operations as CPU hotplug operations which took place between skel open and
scheduler init can still trigger restart.
layered_dispatch() was incorrectly continuing down to the lower priority
DSQs after successfully consuming from HI_FALLBACK_DSQ which can lead to
latency issues. Fix it.
The main reason why custom affinities are tricky for scx_layered is because
if we put a task which doesn't allow all CPUs into a layer's DSQ, it may not
get consumed for an indefinite amount of time. However, this is only true
for confined layers. Both open and grouped layers always consumed from all
CPUs and thus don't have this risk.
Let's allow tasks with custom affinities in open and grouped layers.
- In select_cpu(), don't consider direct dispatching to a local DSQ as
affinity violation even if the target CPU is outside the layer's cpumask
if the layer is open.
- In enqueue(), separate out per-cpu kthread special case into its own
block. Note that this is only applied if the layer is not preempting as a
preempting layer has a higher priority than HI_FALLBACK_DSQ anyway.
- Trigger the LO_FALLBACK_DSQ path for other threads only if the layer is
confined.
- The preemption path now also runs for tasks with a custom affinity in open
and grouped layers. Update it so that it only considers the CPUs in the
preempting task's allowed cpumask.
(cherry picked from commit 82d2f887a4608de61ddf5e15643c10e504a88f7b)
- AFFN_VIOL for per-cpu tasks could be double counted. Once in select_cpu()
and again in enqueue(). Count in select_cpu() only when direct
dispatching.
- Violating tasks were prioritized over non-violating ones because they were
queued on SCX_DSQ_GLOBAL which has priority over all user DSQs. This
doesn't make sense. Let's introduce two fallback DSQs - HI_FALLBACK_DSQ
and LO_FALLBACK_DSQ. HI is used for violating kthreads and LO for
violating user threads. HI is dispatched after preempting layers and LO
after all other layers. This shouldn't change the behavior too much for
kthreads while punshing, rather than rewarding, violating user threads.
(cherry picked from commit 67f69645667ba8a155cae9a9b7e90c055d39e23c)
C SCX_OPS_ATTACH() and rust scx_ops_attach() macros were not calling
.attach() and were only attaching the struct_ops. This meant that all
non-struct_ops BPF programs contained in the skels were never attached which
breaks e.g. scx_layered.
Let's fix it by adding .attach() invocation the the attach macros.
Only the very newest kernels support scx_bpf_cpuperf_set(). Let's update
scx_layered to accommodate older kernels as well.
Signed-off-by: David Vernet <void@manifault.com>
This change adds `scx_bpf_cpuperf_cap`, `scx_bpf_cpuperf_cur` and
`scx_bpf_cpuperf_set` definitions that were recently introduced into
[`sched_ext`](https://github.com/sched-ext/sched_ext/pull/180). It adds
a `perf` field to `scx_layered` to allow for controlling performance per
layer.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
If a library creates threads, those threads will often have the same
name. If two different processes of different priority both use a
library, it may be that we want the library's threads in each process to
be put into different layers.
To support this, let's add the ability to filter not only by task name,
but also by process name via the task thread group leader's comm.
Tested by creating two executables named "foo" and "bar", which both
spawn a bunch of tasks named "exp_worker" that spin until being
interrupted. With this config: https://pastebin.com/Uz2phzxQ, the tasks
were correctly matched to the expected layers.
Signed-off-by: David Vernet <void@manifault.com>
Some people have expressed confusion at this behavior. Let's be a bit
more explicit in the documentation.
Signed-off-by: David Vernet <void@manifault.com>
