When a task is running on more performant core, the scheduler will give
a longer time slice. On the other hand, on a less performant core, a
shorter time slice will be assigned. The longer time slice helps
boosting clock frequency on a performant core. Also, the shorter time
slice gives more chance the performant core being utilized.
Regarding the CPU capacity, we first check if kernel-provided capacitiy values
are trustworthy or not. If not (i.e., all the same values), we rely on
the user-provided value, based on each CPU's maximum clock frequency.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
With the --prefer-smt-core option is on, the core compaction prefers to
utilizae hyper-twin first before utilizing the other physical CPUs. By
default, the option is off.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Previously, the core compaction assumed that each core's capacity was
the same. Now, we additionally consider each core's max clock frequency.
So, it always tries to use the higher-frequency cores first.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Remove unused constants and rename outdated constants to proper names
(LAVD_TC_* to LAVC_CC_* and LAVD_ELIGIBLE_DSQ to LAVD_GLOBAL_DSQ).
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Using negative values with --slice-us-lag can be useful to make
performance more consistent and prioritize newly created tasks over the
running tasks.
Therefore, allow to specify negative values from the command line and
also update the documentation of this option.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
In some scenarios, a CPU-intensive task may be on the critical path for
interactive workloads. For example, you may have a game with CPU-intensive
tasks that are crunching the logic for the game, and that's required for the
game to proceed without being choppy.
To support such workflows, this change adds logic to allow a non-interactive
task to inherit the lower (i.e. stronger) latency priority of another task if
it wakes or is woken by that task.
Signed-off-by: David Vernet <void@manifault.com>
Currently, a task's deadline is computed as its vtime + a scaled function of
its average runtime (with its deadline being scaled down if it's more
interactive). This makes sense intuitively, as we do want an interactive task
to have an earlier deadline, but it also has some flaws.
For one thing, we're currently ignoring duty cycle when determining a task's
deadline. This has a few implications. Firstly, because we reward tasks with
higher waker and blocked frequencies due to considering them to be part of a
work chain, we implicitly penalize tasks that rarely ever use the CPU because
those frequencies are low. While those tasks are likely not part of a work
chain, they also should get an interactivity boost just by pure virtue of not
using the CPU very often. This should in theory be addressed by vruntime, but
because we cap the amount of vtime that a task can accumulate to one slice, it
may not be adequately reflected after a task runs for the first time.
Another problem is that we're minimizing a task's deadline if it's interactive,
but we're also not really penalizing a task that's a super CPU hog by
increasing its deadline. We sort of do a bit by applying a higher niceness
which gives it a higher deadline for a lower weight, but its somewhat minimal
considering that we're using niceness, and that the best an interactive task
can do is minimize its deadline to near zero relative to its vtime.
What we really want to do is "negatively" scale an interactive task's deadline
with the same magnitude as we "positively" scale a CPU-hogging task's deadline.
To do this, we make two major changes to how we compute deadline:
1. Instead of using niceness, we now instead use our own straightforward
scaling factor. This was chosen arbitrarily to be a scaling by 1000, but we
can and should improve this in the future.
2. We now create a _signed_ linear latency priority factor as a sum of the
three following inputs:
- Work-chain factor (log_2 of product of blocked freq and waker freq)
- Inverse duty cycle factor (log_2 of the inverse of a task's duty cycle --
higher duty cycle means lower factor)
- Average runtime factor (Higher avg runtime means higher average runtime
factor)
We then compute the latency priority as:
lat_prio := Average runtime factor - (work-chain factor + duty cycle factor)
This gives us a signed value that can be negative. With this, we can compute a
non-negative weight value by calculating a weight from the absolute value of
lat_prio, and use this to scale slice_ns. If lat_prio is negative we calculate
a task's deadline as its vtime MINUS its scaled slice_ns, and if it's positive,
it's the task's vtime PLUS scaled slice_ns.
This ends up working well because you get a higher weight both for highly
interactive tasks, and highly CPU-hogging / non-interactive tasks, which lets
you scale a task's deadline "more negatively" for interactive tasks, and "more
positively" for the CPU hogs.
With this change, we get a significant improvement in FPS. On a 7950X, if I run
the following workload:
$ stress-ng -c $((8 * $(nproc)))
1. I get 60 FPS when playing Stellaris (while time is progressing at max
speed), whereas EEVDF gets 6-7 FPS.
2. I get ~15-40 FPS while playing Civ6, whereas EEVDF seems to get < 1 FPS. The
Civ6 benchmark doesn't even start after over 4 minutes in the initial frame
with EEVDF, but gets us 13s / turn with rusty.
3. It seems that EEVDF has improved with Terraria in v6.9. It was able to
maintain ~30-55 FPS, as opposed to the ~5-10FPS we've seen in the past.
rusty is still able to maintain a solid 60-62FPS consistently with no
problem, however.
Add a layer match based on either the effective user id or the effective
group id. This allows for creating layers for individual users or
groups.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Add NUMA node topology awareness for scx_layared. This borrows some of
the NUMA handling from scx_rusty and allows layers to set a node mask.
Different layer kinds will use the node mask differently.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Simplify LoadBalancer::populate_tasks_by_load() by cutting out the
heap allocation bits, by moving mutable accesses in front of immutable
ones. Because multiple immutable accesses (between bss and rodata) do
not conflict, we don't need the intermediate PID storage.
Signed-off-by: Daniel Müller <deso@posteo.net>
Periodically report to stdout samples of the effective time slice
applied to tasks.
While one could determine this metric by examining the max slice_ns and
nr_waiting metrics, directly reporting it to stdout allows users to
quickly identify what is happening and it provides a clearer overview of
the scheduling behavior.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Dispatching per-CPU kthreads directly is disabled by default, reporting
this metric can generate some confusion (since it is always 0), and even
if local kthread dispatches are enabled, they should be still considered
as regular direct dispatches (there is no difference in practice).
Therefore, merge direct kthread dispatches into direct dispatches and
drop the separate nr_kthread_dispatches metric.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Scale the task's time slice based on the average amount of tasks that
are currently waiting to be dispatched.
Use a moving average for the amount of waiting tasks to smooth out
potential spikes caused by temporary bursts of tasks piling in the wait
queues.
This was initially modeled in scx_rustland and it seems to work pretty
well also in scx_bpfland now.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
With all the other optimizations and tunings, it turns out that maintaining
two runqueues has more harm than good.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Further depenalize above-average latency-critical tasks and penalize
further below-avergage latency-critical tasks in ineligibility duration.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
LAVD_VDL_LOOSENESS_FT represents how loose the deadline is. The smaller
value means the deadline is tighter. While it is unlikely to be tuned,
let's keep it as a tunable for now.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Non-kthreads with custom affinities in non-open layers are dispatched into a
LO_FALLBACK_DSQ, with the idea being that they're penalized for their custom
affinities. When a host is fully utilized, these tasks can end up being starved
due to LO_FALLBACK_DSQ being consumed only when there are no other layers to
consume from. In internal workloads at Meta, we've observed that this can
happen in practice.
Longer term, we can probably address this by implementing layer weights and
applying that to fallback DSQs to avoid starvation. For now, let's just
dispatch them to HI_FALLBACK_DSQ to avoid this starvation issue.
Signed-off-by: David Vernet <void@manifault.com>
Refactor the main module for scx_layered to move metrics into a separate
module. This change does no functional differences, only code structure.
This will make it a little easier to navigate the logic in the main
scheduler code.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
That is okay since the runtime is considered in calculating a virtual
deadline. A shorter runtime will result in a tighter deadline linearly.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
If inheriting the parent's properties, a new fork task tends to be too
prioritized. That is, many parent processes, such as `make,` are a bit
more latency-critical than average.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Instead of using a static value to classify tasks based on their average
amount of voluntary context switches, try to periodically evaluate an
optimal threshold, based on a global average of voluntary context
switches among of all the running tasks.
Tasks with an average amount of voluntary context switches greater than
the global average will be classified as interactive.
The global average is evaluated as an exponentially weighted moving
average (EWMA), as:
avg(t) = avg(t - 1) * 0.75 - task_avg(t) * 0.25
This approach is more efficient than iterating through all tasks and it
helps to prevent rapid fluctuations that may be caused by bursts of
voluntary context switch events.
The dynamic nvcsw threshold enables a more precise adjustment of
the classification criteria to swiftly respond to global system changes:
tasks can be quickly classified as interactive, but if the system
experiences too many interactive events, the criteria for maintaining
interactive status become stricter. This creates a natural selection
process where only the most deserving tasks remain interactive.
Additionally, introduce the new option `--nvcsw-max-thresh N`, which
allows to extend or restrict the fluctuation range of the global average
threshold for voluntary context switches.
Tested-by: Piotr Gorski <piotrgorski@cachyos.org>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Advancing the clock slower when overloaded gives more opportunities for
latency-critical tasks to cut in the run queue. Controlling the clock
better reflects the actual load than the prior approach of stretching
the time-space when overloaded.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
We now maintain two run queues—an eligible run queue (DSQ) and an
ineligible run queue (rbtree)—sorted by the task's virtual deadline.
When the eligible run queue is empty, or the ineligible run queue has
not been consumed for too long (e.g., 15 msec), a task in the ineligible
run queue is moved to the eligible run queue for execution. With these
two queues, we have a better admission control.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Followed commit 1c3b563, move the checking of task.migrated.get() into
the vector filter. In this way, we can remove the skip_while() call in
find_first_candidate().
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Update libbpf-rs & libbpf-cargo to 0.24. Among other things, generated
skeletons now contain directly accessible map and program objects, no
longer necessitating the use of accessor methods. As a result, the risk
for mutability conflicts is reduced greatly.
Signed-off-by: Daniel Müller <deso@posteo.net>
This change refactors some of the helper methods for getting the
preferred node for tasks using mempolicy. The load balancing logic in
try_find_move_task is updated to allow for a filter, which is used to
filter for tasks with a preferred mempolicy.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
This change makes scx_rusty mempolicy aware. When a process uses
set_mempolicy it can change NUMA memory preferences and cause
performance issues when tasks are scheduled on remote NUMA nodes. This
change modifies task_pick_domain to use the new helper method that
returns the preferred node id.
Signed-off-by: Daniel Hodges <hodges.daniel.scott@gmail.com>
Estimating the service time from run time and frequency is not
incorrect. However, it reacts slowly to sudden changes since it relies
on the moving average. Hence, we directly measure the service time to
enforce fairness.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Instead of performing domain mask checking inside
"find_first_candidate()" every time, check whether the tasks within push
domain are abled to run on pull domain by performing the mask check at
vector generation stage.
This way can also avoid repeated computation generated by the same
(task, pull_dom) pair as they'll try to check whether the pull domain is
in the task domain mask.
Also since whether a task is a kworker won't change in time, we can
perform the check earlier and put it in the filter, too.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
We always use nr_cpu_ids to represent the maximum CPU id returned by
scx_bpf_nr_cpu_ids().
Replace cpu_max with nr_cpu_ids to be more consistent with the rest of
the code.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
We can rely on scx_bpf_nr_cpu_ids() to create all the possible per-CPU
DSQs, eliminating the need for the hard-coded limit MAX_CPUS.
In this way scx_bpfland can support the same amount of CPUs that the
kernel can handle.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Instead of constantly checking the need to drain tasks from the DSQs of
the offline CPUs, provide an atomic flag to notify when there are tasks
to be drained from the offline CPUs.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Refine the safeguard mechanism to avoid generating too many interactive
tasks in the system, which could nullify the effect of the
interactive/regular task classification.
The safeguard mechanism operates by pausing the promotion of new tasks
to interactive status during the task wake-up process, whenever the
number of interactive tasks in the priority queue exceeds a specific
limit (set to 4x the number of online CPUs).
Halting the promotion of additional interactive tasks allows to
prioritize those already classified as interactive, thereby preventing
potential "bursts" of excessive interactive tasks in the system.
This refines the mitigation already provided by commit 640bd562
("scx_bpfland: prevent tasks from abusing interactive priority boost").
Fixes: 640bd562 ("scx_bpfland: prevent tasks from abusing interactive priority boost")
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Always assign the maximum time slice if there are idle CPUs in the
system.
Otherwise, double the task's unused time slice to reward tasks that use
less CPU time and at the same time refill the time slice of the tasks
every time they're dispatched.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
sched_ext is about to be merged upstream. There are some compatibility
breaking changes and we're making the current sched_ext/for-6.11
1edab907b57d ("sched_ext/scx_qmap: Pick idle CPU for direct dispatch on
!wakeup enqueues") the baseline.
Tag everything except scx_mitosis as 1.0.0. As scx_mitosis is still in early
development and is currently temporarily disabled, only the patchlevel is
bumped.
Sync from sched_ext/for-6.11 1edab907b57d ("sched_ext/scx_qmap: Pick idle
CPU for direct dispatch on !wakeup enqueues")
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext.git for-6.11
- cgroup support hasn't landed in the upstream kernel yet. This most likely
will happen in a few weeks. For the time being, disable scx_flatcg,
scx_pair and scx_mitosis.
- Compat macro for DSQ task iterator dropped. This is now a part of
the baseline.
- scx_bpf_consume() isn't upstream yet. BPF interfacing side is still being
discussed. Dropped example usage from tools/sched_ext. None of the
practical schedulers use it, so this should be fine for now.
- scx_bpf_cpu_rq() added.
- AUTOATTACH workaround for newer libbpf versions added.
A task can become a runnable on any task's context not only its waker
task. Thus, we should not count wake-up on unrelated task's context.
With this commit, the scheduler can (much more) accurately detect
waker-wakee relationsships.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
The prior approach using the sum of weights gives too much penalty to
nice tasks with large nice values. With this commit, the time slice is
determined by the number of runnable tasks regardless of nice priority.
Note that the fairness will still be enforced based on tasks' nice
priorities (weights).
Signed-off-by: Changwoo Min <changwoo@igalia.com>
To easily distinguish, let's initialize the current logical clock to
zero (not the current physical time). Also, avoid the deadline
calculation being zero by adding +1 here and there.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
The priority boost for interactive tasks can be exploited to render the
system nearly unresponsive by creating numerous tasks that constantly
switch between wait/wakeup states.
For example, stress tests like `hackbench -l 10000` can significantly
degrade system responsiveness.
To mitigate this, limit the number of interactive tasks added to the
priority queue to 4x the number of online CPUs.
This simple approach appears to be a quite effective at identifying
potential spam of "fake" interactive tasks, while still prioritizing
legitimate interactive tasks.
Additionally, periodically refresh the interactive status of the tasks
based on their most recent average of voluntary context switches,
preventing the interactive status from being too "sticky".
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Avoid dispatching per-CPU kthreads directly, since this may cause
interactivity problems or unfairness, for example if there are too many
softirqs being scheduled (e.g., in presence of high RX network traffic
or when running certain stress tests, like hackbench).
Moreover, in order to help with testing and benchmarks, introduce the
option --local-kthread, that allows to restore the old behavior if
enabled.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
When updating the task vruntime, ensure the time slice delta is always a
positive value. Failing to do so may cause the global vruntime to
increase excessively due to overflows.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Periodically report the amount of online CPUs to stdout.
The online CPUs are initially evaluated looking at the online cpumask,
then the value is updated in the .cpu_offline() / .cpu_online()
callbacks.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Keep track of the CPUs that are running interactive tasks and report
their amount to stdout.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
The correct default value of slice_ns 5ms, not 5s.
This change doesn't really make any difference in practice, since these
values are changed by the Rust part when the scheduler is started, but
it's good to keep this aligned to the proper values for consistency.
Tested-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
This commit changes the use of a physical clock to a virtual, logical
clock in calculating deadlines.
- The virtual current clock advances upon a task's running to its
virtual deadline.
- When enqueuing a task, its virtual deadline from the virtual current
clock is calculated.
With the above two changes, this guarantees that there is no such task
whose virtual deadline is smaller than the virtual current clock. This
means any enqueuing task can compete with any other already enqueued
tasks. This allows a latency-critical task to be immediately scheduled
if needed.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Every time we need to dispatch a task re-evalate its time slice as:
(unused_time_slice + min_time_slice) / 2
This allows to refill the time slice for tasks that haven't used much of
their previously assigned time, improving fairness.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Make sure to always classify interactive tasks, even when the system is
not fully utilized. This ensures that if the system suddenly becomes
overloaded, we already know which tasks need to be dispatched to the
priority DSQ.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Tasks are consumed from various DSQs in the following order:
per-CPU DSQs => priority DSQ => shared DSQ
Tasks in the shared DSQ may be starved by those in the priority DSQ,
which in turn may be starved by tasks dispatched to any per-CPU DSQ.
To mitigate this, record the timestamp of the last task scheduling event
both from the priority DSQ and the shared DSQ.
If the starvation threshold is exceeded without consuming a task, the
scheduler will be forced to consume a task from the corresponding DSQ.
The starvation threshold can be adjusted using the --starvation-thresh
command line parameter (default is 5ms).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
There is no need to RCU protect the cpumask for the offline CPUs: it is
created once when the scheduler is initialized and it's never
deallocated.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reduce the default time slice down to 5ms for a faster reaction and
system responsiveness when the system is overcomissioned.
This also helps to provide a more predictable level of performance.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Always use direct CPU dispatch for kthreads, there is no need to treat
kthreads in a special way, simply reuse direct CPU dispatch to
prioritize them.
Moreover, change direct CPU dispatches to use scx_bpf_dispatch_vtime(),
since we may dispatch multiple tasks to the same per-CPU DSQ now.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Small refactoring of the idle CPU selection logic:
- optimize idle CPU selection for tasks that can run on a single CPU
- drop the built-in idle selection policy and completely rely on the
custom one
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
We are incorrectly using the SMT idle cpumask to find any idle CPU, fix
by using the generic idle cpumask.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Implement CPU hotplugging in scx_bpfland without restarting the
scheduler.
The idle selection logic has been updated to consider online CPUs.
Additionally, a cpumask for offline CPUs has been introduced. Tasks
that have been dispatched to the DSQs associated with offline CPUs are
consumed by the other CPUs that are still online.
Moreover, the dependency on the Topology crate is temporarily dropped
and instead, /sys/devices/system/cpu/smt/active is used to determine if
SMT should be taken into account during idle selection. The Topology
crate will be re-introduced later when scx_bpfland will gain more
topology-aware capabilities.
This fixes#406.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The stats map in scx_rusty is a BPF_MAP_TYPE_PERCPU_ARRAY, with its size
determined by num_possible_cpus(). Initializing it with nr_cpu_ids() can
result in errors such as:
Error: Failed to zero stat
Caused by:
number of values 6 != number of cpus 8
Fix by using num_possible_cpus() to initialize it.
Fixes: 263e02f6 ("rusty: Use nr_cpu_ids instead of nr_cpus_possible")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
