Alex Guzman
9fec6dfa39
roon-server: add back state directory
2019-08-09 22:21:46 -07:00
Silvan Mosberger
ce82d0b61a
Couchdb: Don't chown /var/log to couchdb ( #65347 )
...
Couchdb: Don't chown /var/log to couchdb
2019-08-10 01:36:15 +02:00
Alex Guzman
d830ae9af3
[roon-server] Use non-deprecated string type
2019-08-09 13:02:46 -07:00
Edmund Wu
18d176dc20
nixos/postgresql: fix quoted queries
2019-08-09 15:11:24 -04:00
Matthew Bauer
ddf38a8241
Merge pull request #65002 from matthewbauer/binfmt-wasm
...
Add binfmt interpreter for wasm
2019-08-09 14:04:21 -04:00
Matthieu Coudron
2da1ad60a8
boot.kernelPackages: check for conflicts
...
It's currently possible to set conflicting `boot.kernelPackages` several times
which can prove confusing.
This is an attempt to warn for this.
2019-08-10 02:27:52 +09:00
worldofpeace
f12f2bb828
nixos/gnome-documents: move to programs
2019-08-09 12:56:11 -04:00
worldofpeace
6c525b1076
nixos/gnome-disks: move to programs
2019-08-09 12:56:11 -04:00
worldofpeace
ff0e3aae35
nixos/file-roller: move to programs
2019-08-09 12:56:11 -04:00
worldofpeace
db69d2dfe7
nixos/evince: move to programs
2019-08-09 12:56:11 -04:00
Silvan Mosberger
013d403f30
nixos/dwm-status: add module ( #51319 )
...
nixos/dwm-status: add module
2019-08-09 15:39:50 +02:00
Bas van Dijk
fae25242e9
Merge pull request #66327 from basvandijk/parameterizable-nixos-generate-config
...
nixos-generate-config: enable overriding configuration.nix
2019-08-09 14:39:34 +02:00
Frederik Rietdijk
9bd78cb048
Merge master into staging-next
2019-08-09 14:00:27 +02:00
Marek Mahut
f14628e576
Merge pull request #66341 from Ma27/bump-prometheus-wireguard-exporter
...
prometheus-wireguard-exporter: 3.0.0 -> 3.0.1
2019-08-09 13:12:06 +02:00
Periklis Tsirakidis
95dec03601
[throttled] Enable custom config
2019-08-09 09:22:38 +02:00
Silvan Mosberger
88bb9fa403
nixos/modules: Replace all nested types.either's with types.oneOf's
2019-08-08 23:35:52 +02:00
Maximilian Bosch
41b9c5f1da
nixos/prometheus-wireguard-exporter: add support for -r switch
...
With this switch activated, the exporter also exposes the remote IP of
each active WireGuard peer.
2019-08-08 21:54:49 +02:00
Bas van Dijk
810388afd2
nixos-generate-config: enable overriding configuration.nix
2019-08-08 17:00:10 +02:00
Alex Guzman
9f9b458ce3
[roon-server] don't create user if user changes defaults
...
If the user changes the user for roon, we can assume they handled the setup for it
2019-08-07 13:23:36 -07:00
Alex Guzman
6572b5e4a1
[roon-server] make roon user a system user
2019-08-07 13:12:57 -07:00
Alex Guzman
f160233793
roon-server: let nix assign ids
2019-08-07 12:34:52 -07:00
Alex Guzman
62d242d1cd
roon-server: Add actual user piping
...
Adds defined IDs
2019-08-07 12:27:52 -07:00
Alex Guzman
8becc897ea
roon-server: disable DynamicUser
...
DynamicUser currently breaks the backup functionality provided by roon,
as the roon server cannot write to non-canonical directories and the
recycled UIDs/GIDs would make managing permissions for the directory
impossible. On top of that, it would break the ability to manage the
local music library files (as it would not be able to delete them).
2019-08-07 11:57:42 -07:00
Thomas Tuegel
38f3c6afa1
Merge pull request #66226 from xvello/xvello/bluez-qt
...
Add bluez-qt as an explicit dependency of plasma5
2019-08-07 08:46:02 -05:00
Kai Wohlfahrt
28cf80acf8
nixos/hardware.deviceTree: Move things around
...
In response to comments, create a sub-folder for deviceTree packages
(starting with rpi), and a top-level package for helpers.
2019-08-07 13:51:22 +01:00
Kai Wohlfahrt
dd0a951279
nixos/hardware.deviceTree: new module
...
Add support for custom device-tree files, and applying overlays to them.
This is useful for supporting non-discoverable hardware, such as sensors
attached to GPIO pins on a Raspberry Pi.
2019-08-07 13:51:22 +01:00
vdot0x23
386f9739b5
nixos/stubby: Clearer wording for upstreamServers
...
Indicate that upstreamServers actually replaces defaults instead of adding to default.
2019-08-07 12:23:20 +00:00
Danylo Hlynskyi
0730e81785
postgresql: running initdb from command line now works ( #65309 )
...
The issue was only with NixOS service, `postgresql` installed through
`nix-env` was not affected.
Fixes https://github.com/NixOS/nixpkgs/issues/23655
2019-08-07 14:17:36 +03:00
worldofpeace
a4c6a7b336
Merge pull request #63790 from chpatrick/gdm-autosuspend-option
...
nixos/gdm: add autoSuspend option
2019-08-06 18:09:20 -04:00
Patrick Chilton
7c854aa974
nixos/gdm: add autoSuspend option
2019-08-06 18:08:21 -04:00
Xavier Vello
e383d99244
Add bluez-qt as an explicit dependency of plasma5
...
When bluetooth is enabled, we install bluedevil, but
its applet cannot work without the qml components in
bluez-qt.
Superseedes #65440 that failed to address the issue.
2019-08-06 21:53:30 +02:00
Franz Pletz
666b291d19
Merge pull request #66073 from WilliButz/fix-unifi
...
nixos/unifi: create data directory with correct permissions
2019-08-06 16:34:30 +00:00
worldofpeace
7a53b1cbe7
Merge pull request #65860 from etu/surf-display-kiosk-session
...
Surf display kiosk session
2019-08-05 14:41:56 -04:00
Elis Hirwing
792da0c4d4
nixos/surf-display: Add kiosk display manager session
2019-08-05 17:50:06 +02:00
WilliButz
d6a4902662
nixos/unifi: create data directory with correct permissions
2019-08-05 15:09:16 +02:00
Danylo Hlynskyi
7585496eff
Merge branch 'master' into flip-map-foreach
2019-08-05 14:09:28 +03:00
danbst
0f8596ab3f
mass replace "flip map -> forEach"
...
See `forEach`-introduction commit.
```
rg 'flip map ' --files-with-matches | xargs sed -i 's/flip map /forEach /g'
```
2019-08-05 14:03:38 +03:00
danbst
91bb646e98
Revert "mass replace "flip map -> foreach""
...
This reverts commit 3b0534310c
2019-08-05 14:01:45 +03:00
worldofpeace
d745487c1e
nixos/pantheon: use filechooser module
...
Setting GTK_CSD=1 works around the issue
we were having with this [0]
[0]: https://github.com/elementary/files/issues/971
2019-08-05 05:43:48 -04:00
worldofpeace
399ff42d73
nixos/pantheon: set GTK_CSD
...
Causes various issues when not set
* https://github.com/elementary/files/issues/971
* https://github.com/elementary/default-settings/pull/103
* https://github.com/cassidyjames/ideogram/issues/26
However this can cause certain problems in gala
* https://github.com/elementary/gala/issues/244
2019-08-05 05:42:35 -04:00
David Anderson
089da1c14d
nixos/sshguard: create ipsets before starting, and clean up after stopping.
...
The fix for #62874 introduced a race condition on startup: the postStart
commands that configure the firewall run concurrently with sshguard's
creation of the ipsets that the rules depend on. Unfortunately iptables
fails hard when referencing an ipset that doesn't exist, so this causes
non-deterministic crashlooping until sshguard wins the race.
This change fixes that race condition by always creating the ipset and
reconfiguring the firewall before starting sshguard, so that the order
of operations is always deterministic.
This change also cleans up the ipsets on sshguard shutdown, so that
removing sshguard from a running system doesn't leave state behind.
Fixes #65985 .
2019-08-04 16:23:22 -07:00
bake
9e2a710117
nixos/gitolite: dataDir group-readable
2019-08-04 18:47:02 +09:00
Frederik Rietdijk
27e030a1cc
Merge pull request #62812 from Tomahna/bloop
...
bloop: 1.2.5 -> 1.3.2
2019-08-04 10:07:16 +02:00
Jörg Thalheim
d02ead41f8
Merge pull request #65407 from alunduil/add-zfs-replication
...
Add zfs replication
2019-08-03 09:14:08 +01:00
Frederik Rietdijk
7560e2d64f
Merge pull request #65376 from abbradar/mdadm-upstream
...
Use upstream units for mdadm
2019-08-03 08:06:07 +02:00
Frederik Rietdijk
d20a59d2e5
Merge master into staging-next
2019-08-02 23:27:18 +02:00
WilliButz
1ce989cce6
nixos/prometheus-exporters: update documentation
2019-08-02 18:50:01 +02:00
WilliButz
29d765e250
nixos/prometheus-wireguard-exporter: use ExecStart instead of script
2019-08-02 18:50:01 +02:00
WilliButz
afd0dc17d6
nixos/prometheus-exporters: use DynamicUser by default
...
Only define seperate users and groups when necessary.
2019-08-02 18:50:01 +02:00
WilliButz
495222a840
nixos/prometheus-exporter: use separate user for each exporter
...
Stop using nobody/nogroup by default and use seperate users for each
exporter instead.
2019-08-02 18:49:56 +02:00
WilliButz
c221f9fdf2
Merge pull request #65751 from mayflower/pkgs/prometheus-postgres-exporter
...
prometheus-postgres-exporter: init at 0.5.1
2019-08-02 18:45:32 +02:00
Alex Brandt
bdd7b5a3ab
nixos/zfs: add autoReplication functionality
...
This adds a simple configuration for sending snapshots to a remote
system using zfs-replicate that ties into the autoSnapshot settings
already present in services.zfs.autoSnapshot.
2019-08-02 08:04:21 -07:00
Franz Pletz
e4c60a1e42
prometheus-postgres-exporter: init at 0.5.1
2019-08-02 15:59:29 +02:00
Frederik Rietdijk
6f723b9bad
Merge master into staging-next
2019-08-02 09:18:37 +02:00
Peter Hoeg
f2639566b5
Merge pull request #30712 from peterhoeg/f/service
...
systemd user services shouldn't run as root and other "non-interactive" users
2019-08-02 11:58:27 +08:00
Robin Gloster
443b0f6332
Merge pull request #65566 from rasendubi/syncthing-group-fix
...
syncthing: create default group if not overridden
2019-08-01 23:17:37 +00:00
Robin Gloster
41dac4bf9f
Merge pull request #65582 from WilliButz/add-mailexporter
...
prometheus-mail-exporter: init at 2019-07-14, add module and test
2019-08-01 23:14:21 +00:00
Robin Gloster
19c737fd79
Merge pull request #65699 from jslight90/patch-5
...
nixos/gitlab: fix config initializer permissions
2019-08-01 23:08:39 +00:00
worldofpeace
64b4a24047
nixos/xdg/portal: set GTK_USE_PORTAL with lib.mkIf
...
If lib.optional is given a false value it will return an empty list.
Thusly the set-environment script can have
```
export GTK_USE_PORTAL=
```
This can rub certain bugs the wrong way #65679
so lets make sure this isn't set in the environment
at all.
2019-08-01 17:51:51 -04:00
Frederik Rietdijk
55e4555b77
Merge master into staging-next
2019-08-01 09:42:54 +02:00
Colin L Rice
d7aa6df31f
nix-daemon: Fix builduser count to work when maxJobs is auto
2019-08-01 01:54:28 -04:00
Aaron Andersen
a1f738ba87
Merge pull request #62748 from aanderse/mediawiki
...
nixos/mediawiki: init service to replace httpd subservice
2019-07-31 22:12:23 -04:00
Artemis Tosini
42c3eefd77
nixos/xonsh: Use the package specified in the package option
2019-07-31 23:28:13 +00:00
Nikolay Amiantov
717b8b3219
systemd service: remove generator-packages option
...
Use systemd.packages instead, it's less error prone and more in line with
what's expected.
2019-08-01 00:55:35 +03:00
Nikolay Amiantov
ca780f4a18
swraid service: use upstream units
...
This fixes a serious bug on NixOS with swraid where mdadm arrays weren't
properly stopped on shutdown. Rather than fixing the unit by adding
`Before=final.target` we completely move to upstream units, which uses
systemd shutdown hooks instead. This also drives down maintenance costs
for us.
2019-08-01 00:55:35 +03:00
Nikolay Amiantov
b458121105
stage-1 initrd: replace absolute paths for mdadm
...
We don't patch basename and readlink now too as they were added for
mdadm in 8ecd3a5e1d
2019-08-01 00:55:35 +03:00
Nikolay Amiantov
a304fc5d75
systemd service: add support for shutdown packages
...
Shutdown hooks are executed right before the shutdown, which is useful
for some applications. Among other things this is needed for mdadm hook
to run.
2019-08-01 00:55:35 +03:00
Nikolay Amiantov
fd405dab3e
systemd service: rename generator-packages
2019-08-01 00:55:35 +03:00
Jeff Slight
7efcbead2c
nixos/gitlab: fix config initializer permissions
2019-07-31 14:55:08 -07:00
edef
4bcc6e11d3
Merge pull request #65227 from NixOS/openssh-known-hosts-ca
...
nixos/programs/ssh: allow specifying known host CAs
2019-07-31 12:08:58 +00:00
worldofpeace
bb4f61f73d
Merge pull request #64121 from tadeokondrak/nixos/programs/shell.nix/remove-gnu-specific-option
...
nixos/programs/shell.nix: don't use unnecessary GNU-specific option
2019-07-31 02:19:59 -04:00
worldofpeace
ea8fc75160
Merge pull request #64948 from ambrop72/videodrivers-radeon-alias
...
nixos/xserver: Make radeon in videoDrivers an alias for ati.
2019-07-31 02:13:24 -04:00
WilliButz
5818c73d95
nixos/prometheus-exporters: add mail exporter module
2019-07-30 19:24:26 +02:00
Joachim F
a7d71da84d
Merge pull request #65585 from delroth/hardened-pti
...
nixos/hardened: make pti=on overridable
2019-07-30 10:35:31 +00:00
Janne Heß
ae608faa85
nixos/xfs: Add xfs_repair to the initrd
...
Closes #8820
2019-07-30 09:28:34 +02:00
worldofpeace
7f2f31a812
Merge pull request #65449 from worldofpeace/disable-portals
...
nixos/xdg: disable portals (again, again)
2019-07-29 21:47:51 -04:00
worldofpeace
1b21c9db91
nixos/xdg: add gtkUsePortal option to portals
...
Prior to this change GTK_USE_PORTAL was unconditionally
set to "1". For this to not break things you have to have some
sort of portal implementation in extraPortals.
Setting GTK_USE_PORTAL in this manner is actually only useful
when using portals for applications outside flatpak. For example
people using non-flatpak Firefox who want native filechoosers.
It's also WIP for electron applications to support this.
2019-07-29 21:47:09 -04:00
Pierre Bourdon
67b7e70865
nixos/hardened: make pti=on overridable
...
Introduces a new security.forcePageTableIsolation option (default false
on !hardened, true on hardened) that forces pti=on.
2019-07-30 02:24:56 +02:00
Alexey Shmalko
e50539f7b5
syncthing: create default group if not overridden
...
The following configuration generates a systemd unit that doesn't
start.
```nix
{
services.syncthing = {
enable = true;
user = "my-user";
};
}
```
It fails with
```
systemd[1]: Started Syncthing service.
systemd[6745]: syncthing.service: Failed to determine group credentials: No such process
systemd[6745]: syncthing.service: Failed at step GROUP spawning /nix/store/n1ydz3i08nqp1ajc50ycy1zribmphqc9-syncthing-1.1.4-bin/bin/syncthing: No such process
systemd[1]: syncthing.service: Main process exited, code=exited, status=216/GROUP
systemd[1]: syncthing.service: Failed with result 'exit-code'.
```
This is due to the fact that `syncthing` group (default) is not
created if the user is overridden.
Add a separate check for setting up the default group, so that
user/group are created independently.
2019-07-29 21:56:12 +03:00
Jörg Thalheim
3b0f0741ea
Merge pull request #65335 from Baughn/wifi-crda
...
wifi: Include CRDA regulatory database
2019-07-29 07:02:22 +01:00
Svein Ove Aas
d28a8cc4af
nixos/pantheon: Include CRDA regulatory database
2019-07-28 22:17:19 +01:00
Svein Ove Aas
186dd1ce58
nixos/gnome3: Include CRDA regulatory database
2019-07-28 22:17:10 +01:00
Svein Ove Aas
7ee6226bdd
nixos/networkmanager: Include CRDA regulatory database
2019-07-28 22:10:28 +01:00
Svein Ove Aas
ac50d8e709
nixos/wpa_supplicant: Include CRDA regulatory database
2019-07-28 22:10:28 +01:00
Bas van Dijk
9ff408a2a4
Merge pull request #60500 from basvandijk/thanos-init
...
thanos: init at 0.6.0 & NixOS module
2019-07-28 19:14:55 +02:00
edef
9897956d36
Merge pull request #65485 from arcnmx/pr-taskserver-nixos
...
nixos/taskserver: crl file is optional
2019-07-28 13:02:05 +00:00
Bas van Dijk
0a59be7136
thanos: 0.5.0 -> 0.6.0
2019-07-28 13:28:27 +02:00
Bas van Dijk
dc69b3e6ad
nixos/thanos: code style: don't use a space before a colon
2019-07-28 13:28:27 +02:00
Bas van Dijk
e32e0e6e02
nixos/thanos: assert that prometheus2 is running and has labels set
2019-07-28 13:28:27 +02:00
Bas van Dijk
13da811853
nixos/thanos: allow overriding arguments to the thanos subcommands
2019-07-28 13:28:27 +02:00
Bas van Dijk
2d0243c187
thanos: 0.4.0 -> 0.5.0-rc.0
2019-07-28 13:28:27 +02:00
Bas van Dijk
ebc65a5f21
nixos/thanos: add module for the thanos service
2019-07-28 13:28:27 +02:00
Frederik Rietdijk
cb3ce5d26d
Merge master into staging-next
2019-07-28 12:11:37 +02:00
Frederik Rietdijk
cca5ee9c07
Merge staging-next into staging
2019-07-28 09:10:03 +02:00
arcnmx
c604b38791
nixos/taskserver: crl file is optional
2019-07-27 15:49:46 -07:00
Ashish SHUKLA
d3c2b992d4
sshguard: do not create ipset in post-start
...
Upstream switched to a different type of ipset table, whereas we
create ipset in post-start which overrides upstream, and renders
sshguard ineffective.
Remove ipset creation from post-start, and let it get automatically
by upstream script (sshg-fw-ipset) as part of startup
2019-07-27 10:59:50 +05:30
worldofpeace
1e4d9e08cd
nixos/plasma5: enable xdg.portal
2019-07-26 22:36:32 -04:00
worldofpeace
16c6f169a2
nixos/gnome3: enable xdg.portal
2019-07-26 22:36:14 -04:00
worldofpeace
785158fd64
nixos/flatpak: require xdg.portal to be enabled
2019-07-26 22:35:50 -04:00
worldofpeace
c4d06eff3f
nixos/xdg: disable portal (again)
2019-07-26 22:33:49 -04:00
Aaron Andersen
1ab91bee65
Merge pull request #65418 from mmahut/proxy_server
...
nixos/zabbixProxy: server is a mandatory parameter
2019-07-26 18:46:21 -04:00
Aaron Andersen
5596b69771
nixos/httpd: remove duplicate module entries from httpd.conf
2019-07-26 17:51:06 -04:00
Silvan Mosberger
d3dfe06c38
nixos/xserver: add option to install custom xkb layouts ( #47764 )
...
nixos/xserver: add option to install custom xkb layouts
2019-07-26 20:43:37 +02:00
rnhmjoj
171d5c9200
nixos/xserver: add option to install custom xkb layouts
2019-07-26 18:08:04 +02:00
Marek Mahut
6e762653de
module zabbixProxy: server is a mandatory parameter
2019-07-26 16:22:47 +02:00
Jörg Thalheim
741046a4d6
Merge pull request #65331 from Mic92/zfs-trim
...
nixos/zfs: add trim service
2019-07-26 07:53:33 +01:00
Jörg Thalheim
1d86714a2b
nixos/zfs: add trim service
...
Introduces a trim timer similar to the fstrim service.
According to zpool(8) for consumer hardware periodic manual TRIM
is preferred over automatic TRIM that ZFS implements.
The period of one week is based on recommendations of fstrim.
2019-07-25 12:47:43 +01:00
Orivej Desh
32fbbc6f9b
Merge master into staging
2019-07-25 09:23:21 +00:00
Kevin Rauscher
17c2f79e39
bloop: allow specifying extra cli options
2019-07-25 09:28:13 +02:00
Thomas Tuegel
294e75e832
Merge pull request #65339 from ttuegel/wrap-pinentry_qt5
...
pinentry: Use qt5.wrapQtApps as needed
2019-07-24 16:07:40 -05:00
Thomas Tuegel
9235a8eaef
nixos/config/no-x-libs: Fix pinentry arguments
2019-07-24 15:22:07 -05:00
Kevin Rauscher
d6b6015d34
bloop: get closer to standard bloop packaging
2019-07-24 21:42:40 +02:00
Robin Gloster
5806e71834
Merge pull request #65299 from Ma27/fix-nextcloud-test
...
nixos/nextcloud: fix inclusion of trusted_domains in override config
2019-07-24 19:28:06 +00:00
Silvan Mosberger
5e974362be
nixos/couchdb: Prevent it from chowning /var/log to couchdb:couchdb
...
The default for logFile is /var/log/couchdb.log, and the tmpfile rules chown
${dirOf cfg.logFile}, which is just /var/log, to couchdb:couchdb.
This was found by Edes' report on IRC, which looked like
Detected unsafe path transition /var/log → /var/log/journal during canonicalization of /var/log/journal
While this bug has been present since the initial couchdb module in
62438c09f7062efe018d#59389 ),
this chown is suddenly running unconditionally at every system
activation, therefore triggering the above error.
2019-07-24 20:52:53 +02:00
Thomas Tuegel
3d76d810ed
Merge pull request #65090 from eadwu/compton/7
...
compton: 6.2 -> 7
2019-07-24 06:41:09 -05:00
Peter Hoeg
bede9851a1
Merge pull request #65078 from peterhoeg/f/st
...
nixos/syncthing: do not use nogroup
2019-07-24 13:22:08 +08:00
Aaron Andersen
455d33f514
nixos/mediawiki: init service to replace httpd subservice
2019-07-23 22:02:33 -04:00
Aaron Andersen
72ef4786e1
Merge pull request #64151 from aanderse/httpd-extraSubservices
...
nixos/httpd: module cleanup
2019-07-23 21:58:40 -04:00
Florian Klink
101a4be5a7
Add spotifyd package and service ( #65092 )
...
Add spotifyd package and service
2019-07-24 00:54:24 +02:00
Silvan Mosberger
8403187566
thelounge: init at 3.0.1 ( #51947 )
...
thelounge: init at 3.0.1
2019-07-23 13:45:43 +02:00
Maximilian Bosch
c5e515f5c7
nixos/nextcloud: fix inclusion of trusted_domains in override config
...
Regression I caused with 3944aa051c
2019-07-23 13:29:43 +02:00
Mrmaxmeier
37a2f058ed
nixos/thelounge: init
...
The Lounge is the official and community-managed fork of Shout.
This intends to replace the `shout` service.
2019-07-23 13:18:01 +02:00
Danylo Hlynskyi
d54e52276b
postgresql: update docs
...
https://github.com/NixOS/nixpkgs/issues/32156
2019-07-23 14:17:14 +03:00
Domen Kožar
cfd507d581
system-boot: configurationLimit should be null as default
2019-07-23 10:20:09 +02:00
WilliButz
5dc50eab68
Merge pull request #65102 from d-goldin/patch-1
...
docs prometheus.exporters: typo fix.
2019-07-23 10:06:20 +02:00
worldofpeace
356d9ad758
nixos/pantheon: don't add extraPortals
...
Pantheon's XDG Portal is still WIP and we
it's probably not proper to use gtk's one.
2019-07-23 03:43:41 -04:00
steve-chavez
dfd3a0269c
Shorten mkEnableOption description
2019-07-23 12:19:28 +09:00
steve-chavez
5ccfa0c816
nixos/modules: add greenclip user service
2019-07-23 12:19:28 +09:00
worldofpeace
b1bc0645ea
gdk-pixbuf: rename from gdk_pixbuf
2019-07-22 18:50:57 -04:00
Robin Gloster
da2eda65e3
Merge pull request #65179 from delroth/bind-extraconfig
...
nixos/bind: allow manual additions to zone config fragments
2019-07-22 17:53:49 +00:00
Robin Gloster
e891178dde
Merge pull request #63900 from Ma27/nextcloud-declarative-dbconfig
...
nixos/nextcloud: write config to additional config file
2019-07-22 16:50:02 +00:00
Johan Thomsen
bbd4a0c100
nixos/gitlab: gitlab-workhorse requires exiftool on path to process uploaded images
2019-07-22 16:41:16 +00:00
Maximilian Bosch
3944aa051c
nixos/nextcloud: write config to additional config file
...
One of the main problems of the Nextcloud module is that it's currently
not possible to alter e.g. database configuration after the initial
setup as it's written by their imperative installer to a file.
After some research[1] it turned out that it's possible to override all values
with an additional config file. The documentation has been
slightly updated to remain up-to-date, but the warnings should
remain there as the imperative configuration is still used and may cause
unwanted side-effects.
Also simplified the postgresql test which uses `ensure{Databases,Users}` to
configure the database.
Fixes #49783
[1] https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-483063922
2019-07-22 18:29:52 +02:00
WilliButz
c64f621bfd
nixos/prometheus-nginx-exporter: update module
...
Update exporter submodule to match the new exporter version.
2019-07-22 16:41:10 +02:00
WilliButz
fb6f0a48bb
nixos/prometheus-exporters: add option renaming for submodules
...
Adds the functionality to create option renamings and removals
for exporter submodules as in nixos/modules/rename.nix.
2019-07-22 16:41:10 +02:00
WilliButz
774221191d
nixos/prometheus-exporters: refactor imports, replace 'with lib;'
...
Pass through 'options' to exporter definitions and replace 'with lib;'
by explicit function imports.
2019-07-22 16:41:09 +02:00
WilliButz
01ee2ee2ba
nixos/test: fix prometheus-{bind,varnish}-exporter tests
2019-07-22 16:41:09 +02:00
Nikolay Amiantov
a0ba42e3f4
Merge pull request #64268 from jameysharp/nscd-dynamicuser
...
nixos/nscd: DynamicUser and other cleanups
2019-07-22 16:23:07 +03:00
Franz Pletz
376b5fd000
Merge pull request #64463 from Ma27/graylog-test
...
nixos/graylog: minor fixes, add test
2019-07-21 20:53:39 +00:00
Aaron Andersen
44565adda5
Merge pull request #60436 from nbardiuk/master
...
nixos/tiddlywiki: init
2019-07-21 16:39:42 -04:00
Franz Pletz
bc418837d5
Merge pull request #65225 from Ma27/bump-prometheus-wireguard-exporter
...
prometheus-wireguard-exporter: 2.0.1 -> 3.0.0
2019-07-21 20:19:22 +00:00
Maximilian Bosch
7095bdf988
nixos/prometheus-exporters/wireguard: add support for -s switch
...
Since version 3.0 all allowed IPs and subnets are exposed by the
exporter. With `-s` set on the CLI, instead of a comma-separated list,
each allowed IP and subnet will be in a single field with the schema
`allowed_ip_<index>`.
2019-07-21 21:39:49 +02:00
Danylo Hlynskyi
caa0f82bf8
docs: update docs for postgresql plugins ( #64899 )
...
docs: update docs for postgresql plugins
Co-Authored-By: Mario Rodas <marsam@users.noreply.github.com>
2019-07-21 22:05:41 +03:00
edef
1c9a2d4d7f
nixos/programs/ssh: allow specifying known host CAs
2019-07-21 14:23:41 +00:00
Anders Lundstedt
53841fcea9
nixos/spotifyd: init
2019-07-21 00:58:20 +02:00
Aaron Andersen
9b970d07f3
nixos/httpd: drop postgresql reference
2019-07-20 18:36:24 -04:00
Aaron Andersen
0fd69629c7
nixos/httpd: mark extraSubservices option as deprecated
2019-07-20 18:36:19 -04:00
Aaron Andersen
505df09d50
nixos/httpd: drop the port option
2019-07-20 18:29:46 -04:00
Xavier Vello
df748aeefe
nixos/plasma5: allow to configure the default phonon backend
...
Introduce a new .plasma5.phononBackend option. Default value
"gstreamer" installs the same packages as before. "vlc" installs
only the vlc phonon backend.
2019-07-20 21:53:46 +02:00
Pierre Bourdon
6332bc25cd
nixos/bind: allow manual additions to zone config fragments
2019-07-20 17:50:37 +02:00
Aaron Andersen
30920fbf69
Merge pull request #64741 from dasJ/gitea-smtp-pw
...
nixos/gitea: Support SMTP without pw in the store
2019-07-20 08:32:51 -04:00
Aaron Andersen
faf884ca9b
Merge pull request #64365 from aanderse/tt-rss
...
nixos/tt-rss: remove deprecated usage of PermissionsStartOnly, specify a group to run service as, and fix local pgsql database creation
2019-07-20 08:23:48 -04:00
worldofpeace
d734750608
nixos/xdg: default portal from xserver.enable
...
same affect as f84a4ef892
2019-07-19 19:47:02 -04:00
Samuel Dionne-Riel
f84a4ef892
nixos/xdg: Disables portal by default...
...
Left to do: re-enable as needed in the usual situations.
This added ~286MiB to the base system closure, which is enough to bring
the sd images over the limit allowed on Hydra.
2019-07-19 19:28:51 -04:00
Graham Christensen
a463582040
Merge pull request #65079 from mmahut/typo
...
Renaming security.virtualization.flushL1DataCache to virtualisation
2019-07-19 16:12:52 -04:00
Graham Christensen
d51b522a6e
Merge pull request #64052 from aanderse/tomcat-connector
...
nixos/httpd: drop tomcat-connector httpd subservice
2019-07-19 15:25:44 -04:00
Dima
186222ce7b
Fixing minor typo in prometheus exporters doc
2019-07-19 21:13:57 +02:00
Edmund Wu
23ae47a2d0
compton: 6.2 -> 7
2019-07-19 13:07:21 -04:00
Marek Mahut
e72f25673d
Renaming security.virtualization.flushL1DataCache to virtualisation
...
Fixes #65044
2019-07-19 15:49:37 +02:00
worldofpeace
00eef848b2
nixos/doc: fix build
...
Adjusts to options renamed in 90b1197301
2019-07-18 20:40:24 -04:00
worldofpeace
3531a229d1
nixos/pantheon: add gtk xdg desktop portal
2019-07-18 20:03:12 -04:00
worldofpeace
69f2836c1b
Merge pull request #64575 from pasqui23/portal
...
nixos/xdg: add portal option
2019-07-18 20:00:09 -04:00
Pasquale
90b1197301
nixos/xdg: add portal option
...
This factors the configuration out of the flatpak module.
2019-07-18 19:59:07 -04:00
Peter Simons
c768e1ff48
Merge pull request #64794 from peti/t/postfix-module
...
nixos: add 'localRecipients' config option for Postfix
2019-07-18 19:14:36 +02:00
fuwa
562b5061a7
nixos/tor: fix obfs4 package
2019-07-19 04:11:17 +08:00
Florian Klink
9d339e3b45
Merge pull request #61312 from Yarny0/tsm-client
...
TSM client
2019-07-18 02:46:31 +02:00
Matthew Bauer
857f7fb4af
nixos/binfmt: update release notes and provide examples
2019-07-17 17:09:20 -04:00
Matthew Bauer
1acc701fdb
nixos/binfmt: handle wasm binaries
...
This adds handling for WASM binaries to binfmt’s emulatedSystems. To
enable, add this to your configuration:
boot.binfmt.emulatedSystems = [ "wasm32-wasi" ];
After rebuilding with nixos-rebuild switch, you can run wasm binaries
directly.
2019-07-17 17:00:46 -04:00
Robin Gloster
0972409c95
Merge pull request #64550 from bgamari/gitlab-12.0
...
gitlab: 11.10.8 -> 12.0.3
2019-07-17 16:01:03 +00:00
Jamey Sharp
d4e5748c1b
nixos/openldap: fix assertion
...
In commit d43dc68db3
2019-07-17 11:08:10 +03:00
Nikolay Amiantov
294751a4fc
Merge pull request #62955 from abbradar/resolvconf
...
resolvconf service: init
2019-07-17 11:07:12 +03:00
Peter Hoeg
db858b4d30
Merge pull request #64806 from peterhoeg/f/exec
...
nixos/systemd: 242 supports Type = exec
2019-07-17 14:09:20 +07:00
Nazarii Bardiuk
976928daa2
nixos/tiddlywiki: init
...
Service that runs TiddlyWiki nodejs server
2019-07-16 23:12:16 +01:00
Ambroz Bizjak
4f309207c7
nixos/xserver: Make radeon in videoDrivers an alias for ati.
...
The old open-source driver for AMD/ATI GPUs is commonly known as "radeon"
despite the historical package name xf86-video-ati. For example it presents
itself as RADEON in the Xorg log. So adding "radeon" to videoDrivers should
work.
Also changed the docs for the videoDrivers option to use "radeon" in the
default value instead of "ati".
Fixes #37917
2019-07-16 23:02:09 +02:00
Vladimír Čunát
2b28e4c96f
Merge #64892 : 'staging-next' (another iteration)
...
It's not completely without regressions, but I believe we can deal with
the rest directly on master. This is required for Firefox security fixes.
2019-07-16 19:32:17 +02:00
Frederik Rietdijk
a28a9ac156
Merge master into staging-next
2019-07-16 11:15:46 +02:00
Danylo Hlynskyi
475f1ebd98
Merge branch 'master' into postgresql-plugins-bin
2019-07-16 11:32:52 +03:00
Robin Gloster
52fd300b8c
gitlab module: fix permissions
2019-07-16 03:51:17 +02:00
Robin Gloster
3469c206f2
gitlab-shell: better gitlab_shell_secret location
...
So this won't be cleaned up by removing config/*
2019-07-16 03:51:11 +02:00
Aaron Andersen
ee1231890d
Merge pull request #64810 from WilliButz/grafana-extend-test
...
nixos/tests: extend grafana test, nixos/grafana: use group grafana instead of nogroup
2019-07-15 20:43:36 -04:00
Robin Gloster
783c2f6106
gitlab module: clean up permission handling
...
This is WIP to get rid of PermissionsStartOnly=true
2019-07-16 01:19:07 +02:00
Nikolay Amiantov
b392c5ab4d
Merge pull request #64815 from abbradar/ipxe-efi
...
IPXE EFI netboot fix
2019-07-15 21:21:29 +03:00
Nikolay Amiantov
01b90dce78
resolvconf service: init
...
This is a refactor of how resolvconf is managed on NixOS. We split it
into a separate service which is enabled internally depending on whether
we want /etc/resolv.conf to be managed by it. Various services now take
advantage of those configuration options.
We also now use systemd instead of activation scripts to update
resolv.conf.
NetworkManager now uses the right option for rc-manager DNS
automatically, so the configuration option shouldn't be exposed.
2019-07-15 20:25:39 +03:00
Nikolay Amiantov
e4837acf21
nixos netboot: explicitly specify initrd
...
Needed for iPXE on UEFI, see http://forum.ipxe.org/archive/index.php/thread-7589.html
2019-07-15 19:33:21 +03:00
WilliButz
a9ce5f6c59
nixos/grafana: add grafana user to group 'grafana'
2019-07-15 18:33:19 +02:00
Peter Simons
59bacaca3d
nixos: add 'localRecipients' config option for Postfix
...
The new option services.postfix.localRecipients allows
configuring the postfix option 'local_recipient_maps'. When
set to a list of user names (or patterns), that map
effectively replaces the lookup in the system's user
database that's used by default to determine which local
users are valid.
This option is useful to explicitly set local users that are
allowed to receive e-mail from the outside world. For local
injection i.e. via the 'sendmail' command this option has no
effect.
2019-07-15 17:36:20 +02:00
Peter Hoeg
eb55dd5e6b
nixos/systemd: 242 supports Type = exec
2019-07-15 20:28:26 +08:00
Yarny0
d99462ff5a
nixos/backup/tsm: init module
...
Based on the programs/tsm-client module,
this commit introduces a systemd service that uses the
tsm-client to create regular backups of the machine.
2019-07-15 09:41:37 +02:00
Yarny0
f5b873f43c
nixos/tsm-client: init module
...
This commit brings a module that installs the
IBM Spectrum Protect (Tivoli Storage Manager)
command-line client together with its
system-wide client system-options file `dsm.sys`.
2019-07-15 09:41:37 +02:00
Vladimír Čunát
3686036e02
Merge branch 'master' into staging-next
...
Hydra nixpkgs: ?compare=1530372
2019-07-15 09:39:03 +02:00
Janne Heß
1e23007dcd
nixos/gitea: Support SMTP without pw in the store
2019-07-14 22:48:10 +02:00
Linus Heckemann
a935eff7fa
Merge pull request #62835 from lheckemann/ipv6-privacy-extensions
...
Ipv6 privacy extensions
2019-07-14 19:27:54 +02:00
Silvan Mosberger
5eac339829
nixos/redmine: add database.createLocally option ( #63932 )
...
nixos/redmine: add database.createLocally option
2019-07-14 16:22:37 +02:00
danbst
3b0534310c
mass replace "flip map -> foreach"
...
See `foreach`-introduction commit.
```
rg 'flip map ' --files-with-matches | xargs sed -i 's/flip map /foreach /g'
```
2019-07-14 13:46:10 +03:00
Nikolay Amiantov
8951505dc9
Merge pull request #62956 from abbradar/nm-fixes
...
NetworkManager fixes
2019-07-13 22:31:13 +03:00
José Romildo Malaquias
c3282487dd
xfce4-13: rename to xfce4-14
2019-07-13 08:42:05 -03:00
caadar
6fea6dbc00
manual: mention jmacs as emacs imitation
2019-07-13 11:01:17 +02:00
Frederik Rietdijk
54065ae20d
Merge master into staging-next
2019-07-13 09:45:40 +02:00
Silvan Mosberger
2d7bce29d1
nixos/install-grub: include child configs in grub menu ( #45345 )
...
nixos/install-grub: include child configs in grub menu
2019-07-13 03:07:02 +02:00
Jamey Sharp
d79584c902
nixos/nscd: document why it is configured this way
2019-07-12 12:07:45 -07:00
