It turned out that /dev/snd/* always exists even if there are no sound
drivers loaded at all. Loading `snd` and `snd_timer` fixes that
situation. It is probably fair to assume someone that wants to use sound
also enables that in the NixOS configuration.
Add support for storing secrets in files outside the nix store, since
files in the nix store are world-readable and secrets therefore can't
be stored safely there.
The old string options are kept, since they can potentially be handy
for testing purposes, but their descriptions now state that they
shouldn't be used in production. The manual section is updated to use
the file options rather than the string options and the tests now test
both.
Always enable the UART because the VirtualBug bug that required running without the UART was fixed in 6.0.10. Stop using an old kernel version because the tests work with the default kernel.
(cherry picked from commit ae93571e8d04cebd69491a789d902d6481e05d3f)
In c814d72b51, a bunch of packages were
changed to use the pname attribute, among them were the quake3-demodata
and quake3-pointrelease which we use for the quake3 test.
Fortunately, having pname available means that we no longer need to
match using a prefix, so fixing this eval error also simplifies our
matching.
I directly pushed this to master because the change is non-controversial
and we can't break things that are already broken :-)
Signed-off-by: aszlig <aszlig@nix.build>
* remove kinetic
* release note
* add johanot as maintainer
nixos/ceph: create option for mgr_module_path
- since the upstream default is no longer correct in v14
* fix module, default location for libexec has changed
* ceph: fix test
* maintain only one version
* ceph-client: init
* include ceph-volume python tool in output
nixos/ceph: extraConfig, fix test, wait for ceph-mgr to become active
* run ceph with disk group permission
* add extraConfig option for the global section
needed per cluster
* clear up how ceph.conf is generated
* fix ceph testcase
Since https://github.com/NixOS/nixpkgs/pull/61321, local-fs.target is
part of sysinit.target again, meaning units without
DefaultDependencies=no will automatically depend on it, and the manual
set dependencies can be dropped.
It turns out that checking for the last mount time of an ext4 file
system isn't a very reliable way to check whether the file system was
properly unmounted.
When creating that test in the first place (88530e02b6),
I was reluctant to inspect the file system when the VM is down and was
searching for a way to check for a clean unmount *after* the file system
was mounted again to make sure we don't need to create a 512 MB raw
image on the host.
Fortunately however, when converting from qcow2, qemu-img actually
writes a sparse file, so for most file systems (that is, file systems
supporting sparse files) this shouldn't waste a lot of disk space.
So when investigating the flakiness, I found that whenever the test is
failing, the unmount of /test-x-initrd-mount was done *before* the final
step during which systemd remounts+unmounts all the remaining file
systems.
I haven't investigated why this is the case, but the test is a
regression test for https://github.com/NixOS/nixpkgs/issues/35268, which
actually didn't unmount the file system *at* *all*, so really all we
need to take care here is whether the unmount has happened and not
*how*.
To make sure that checking the filesystem state is enough for this, I
temporarily replaced the $machine->shutdown call with $machine->crash
and verified that the file system state is "not clean".
Signed-off-by: aszlig <aszlig@nix.build>
Fixes: https://github.com/NixOS/nixpkgs/issues/67555
* nixos/acme: Fix ordering of cert requests
When subsequent certificates would be added, they would
not wake up nginx correctly due to target units only being triggered
once. We now added more fine-grained systemd dependencies to make sure
nginx always is aware of new certificates and doesn't restart too early
resulting in a crash.
Furthermore, the acme module has been refactored. Mostly to get
rid of the deprecated PermissionStartOnly systemd options which were
deprecated. Below is a summary of changes made.
* Use SERVICE_RESULT to determine status
This was added in systemd v232. we don't have to keep track
of the EXITCODE ourselves anymore.
* Add regression test for requesting mutliple domains
* Deprecate 'directory' option
We now use systemd's StateDirectory option to manage
create and permissions of the acme state directory.
* The webroot is created using a systemd.tmpfiles.rules rule
instead of the preStart script.
* Depend on certs directly
By getting rid of the target units, we make sure ordering
is correct in the case that you add new certs after already
having deployed some.
Reason it broke before: acme-certificates.target would
be in active state, and if you then add a new cert, it
would still be active and hence nginx would restart
without even requesting a new cert. Not good! We
make the dependencies more fine-grained now. this should fix that
* Remove activationDelay option
It complicated the code a lot, and is rather arbitrary. What if
your activation script takes more than activationDelay seconds?
Instead, one should use systemd dependencies to make sure some
action happens before setting the certificate live.
e.g. If you want to wait until your cert is published in DNS DANE /
TLSA, you could create a unit that blocks until it appears in DNS:
```
RequiredBy=acme-${cert}.service
After=acme-${cert}.service
ExecStart=publish-wait-for-dns-script
```
There ver very many conflicts, basically all due to
name -> pname+version. Fortunately, almost everything was auto-resolved
by kdiff3, and for now I just fixed up a couple evaluation problems,
as verified by the tarball job. There might be some fallback to these
conflicts, but I believe it should be minimal.
Hydra nixpkgs: ?compare=1538299
* nginx: expose generated config and allow nginx reloads
Fixes: https://github.com/NixOS/nixpkgs/issues/15906
Another try was done, but not yet merged in https://github.com/NixOS/nixpkgs/pull/24476
This add 2 new features: ability to review generated Nginx config
(and NixOS has sophisticated generation!) and reloading
of nginx on config changes. This preserves nginx restart on package
updates.
I've modified nginx test to use this new feature and check reload/restart
behavior.
* rename to enableReload
* add sleep(1) in ETag test (race condition) and rewrite rebuild-switch using `nesting.clone`
The actual only difference from the gnome3-xorg
test is that this tests the wayland session.
It's also more accurate to call it just "gnome3"
since wayland is default here.
This is to fix the following error in the test on aarch64-linux:
store# [ 126.911144] thanos[739]: level=error ts=2019-06-16T14:00:26.59870538Z caller=main.go:182 msg="running command failed" err="error executing compaction: first pass of downsampling failed: create dir: mkdir /var/lib/thanos-compact/downsample: no space left on device"
store# [ 126.942655] systemd[1]: thanos-compact.service: Main process exited, code=exited, status=1/FAILURE
One of the main problems of the Nextcloud module is that it's currently
not possible to alter e.g. database configuration after the initial
setup as it's written by their imperative installer to a file.
After some research[1] it turned out that it's possible to override all values
with an additional config file. The documentation has been
slightly updated to remain up-to-date, but the warnings should
remain there as the imperative configuration is still used and may cause
unwanted side-effects.
Also simplified the postgresql test which uses `ensure{Databases,Users}` to
configure the database.
Fixes#49783
[1] https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-483063922
When IPXE tests were added, an option was added for configuring only
the frontend, and the backend configuration was dropped entirely. This
caused most installer tests to fail.
- Create a child configuration named "Work" with an extra config file.
- Name the default configuration as "Home" :-)
- Once the VM is setup, reboot and verify that it has booted into
default configuration.
- Reboot into the "Work" configuration via grub.
- Verify that we have booted into the "Work" configuration and that
the extra config file is present.
This test works for the simple grub configuration and simple UEFI
Grub configuration. UEFI Systemd is not included in the test.
Basic test which confirms new inputs can be created and that messages
can be sent to a UDP-GELF input using `netcat`.
This test requires 4GB of RAM to avoid issues due insufficient
memory (please refer to `nixos/tests/elk.nix` for a detailed explanation of
the issue) for elasticsearch.
Also it's ensured that elasticsearch has an open HTTP port for communication
when starting `graylog`. This is a workaround to ensure that all services
are started in proper order, even in test environments with less power.
However this shouldn't be implemented in the `nixos/graylog` module as
this might be harmful when using elasticsearch clusters that require e.g.
authentication and/or run on different servers.
This commit adds new options to the Deluge service:
- Allow configuration of the user/group which runs the deluged daemon.
- Allow configuration of the user/group which runs the deluge web
daemon.
- Allow opening firewall for the deluge web daemon.
Below that it works but only when supplying a custom password file with
restricted permissions (i.e. outside the nix-store). We can't do that
using an absolute path in the tests.
Seems like you can't have a node as its own seed when it's listening on
an interface instead of an IP. At least the way it was done in the
test doesn't work and I can't figure out any other way than to just
listen on the IP address instead.
This is a simple exporter which exports the information
provided by `wg show all dump` to prometheus.
Co-authored-by: Franz Pletz <fpletz@fnordicwalking.de>
Somewhen between systemd v239 and v242 upstream decided to no longer run
a few system services with `DyanmicUser=1` but failed to provide a
migration path for all the state those services left behind.
For the case of systemd-timesync the state has to be moved from
/var/lib/private/systemd/timesync to /var/lib/systemd/timesync if
/var/lib/systemd/timesync is currently a symlink.
We only do this if the stateVersion is still below 19.09 to avoid
starting to have an ever growing activation script for (then) ancient
systemd migrations that are no longer required.
See https://github.com/systemd/systemd/issues/12131 for details about
the missing migration path and related discussion.
With the systemd update to v242 five lines are not longer sufficient to
verify that the storage was verified. In order to reduce future test
failures increasing it to 10 lines sounds like a sane amount.
We differentiate between modules and baseModules in the
VM builder for NixOS tests. This way, nesting.children, eventhough
it doesn't inherit from parent, still has enough config to
actually complete the test. Otherwise, the qemu modules
would not be loaded, for example, and a nesting.children
statement would not evaluate.
This is actually very useful. Allows you to test switch-to-configuration
nesting.children is still currently still broken as it will throw
away 'too much' of the config, including the modules that make
nixos tests work in the first place. But that's something for
another time.
nixos/nextcloud: Add documentation for nextcloud app installation and updates
nixos/nextcloud: Enable autoUpdateApps in nextcloud test
nixos/nextcloud: Fix typo in nixos/modules/services/web-apps/nextcloud.xml
Co-Authored-By: Florian Klink <flokli@flokli.de>
nixos/nextcloud: Escape html in option description
nixos/nextcloud: Fix autoUpdateApps URL in documentation.
Co-Authored-By: Florian Klink <flokli@flokli.de>
