There's many reason why it is and is going to
continue to be difficult to do this:
1. All display-managers (excluding slim) default PAM rules
disallow root auto login.
2. We can't use wayland
3. We have to use system-wide pulseaudio
4. It could break applications in the session.
This happened to dolphin in plasma5
in the past.
This is a growing technical debt, let's just use
passwordless sudo.
This will keep configuration configuring the size of the /boot partition
still build, while showing the deprecation warning.
In 99.9% of cases I assume ignoring the configuration is better, as the
sd-image builder already is pretty opinionated in that matter.
The slack, seemingly, accounted for more than the minimum required for
slack plus the two partitions.
This change makes the gap a somewhat abstracted amount, but is not
configurable within the derivation.
The current FAT32 partition is kept as it is required for the Raspberry
Pi family of hardware. It is where the firmware is kept.
The partition is kept bootable, and the boot files kept in there until
the following commits, to keep all commits of this series individually
bootable.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the board is
hung, while in reality it's likely resizing partitions.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the Raspberry Pi is
hung, while in reality it's likely resizing partitions.
Prior to this commit an installation over serial via syslinux would
involve:
1. setting bitrate to BIOS's bitrate (typically 115200)
2. setting bitrate to syslinux's bitrate (38400)
3. setting bitrate to stty's bitrate (115200)
By changing syslinux's bitrate to 115200, an installation over serial
is a smoother experience, and consistent with the GRUB2 installation
which is also 115200 bps.
[root@nixos:~]# stty
speed 115200 baud; line = 0;
-brkint ixoff iutf8
-iexten
In a future commit I will add default serial terminals to the syslinux
kernel lines.
cleanSource does not appear to work correctly in this case. The path
does not get coerced to a string, resulting in a dangling symlink
produced in channel.nix. Not sure why, but this
seems to fix it.
Fixes#51025.
/cc @elvishjericco
This, paired with the previous commit, ensures the channel won't be held
back from a kernel upgrade and a non-building sd image, while still
having a new-kernel variant available.
```
b Batch mode. Optimized for huge recursive copies, but less secure if a crash happens during the copy.
```
It seems the "less secure if a crash happens" does not need a crash to
happen.
With batch mode:
```
/[...]/.
Start (0) does not point to parent (___)
```
For pretty much everything copied in.
Without batch mode, everything passes `fsck`.
See #51150
```
b Batch mode. Optimized for huge recursive copies, but less secure if a crash happens during the copy.
```
It seems the "less secure if a crash happens" does not need a crash to
happen.
With batch mode:
```
/[...]/.
Start (0) does not point to parent (___)
```
For pretty much everything copied in.
Without batch mode, everything passes `fsck`.
See #51150
Because when I see "config.system.build.manual.manual" after I forgot
what it means I ask "Why do I need that second `.manual` there again?".
Doesn't happen with `config.system.build.manual.manualHTML`.
This is a 277K (as of right now) addition that can greatly help in some
last recourse scenarios. The specific rEFInd setup will not be able to
boot the installer image, but this is not why it has been added. It has
been added to make use of its volumes scanning capabilities to boot
existing EFI images on the target computer, which is sometimes necessary
with buggy EFI. While is isn't NixOS's job to fix buggy EFI, shipping
this small bit with the installer will help the unlucky few.
Example scenario: two wildly different EFI implementation I have
encountered have fatal flaws in which they sometimes will lose all the
settings, this includes boot configuration. This is compounded by the
fact that the two specific and distinct implementation do not allow
manually adding ESP paths from their interface. The only recourse is to
let the EFI boot the default paths, EFI/boot/boot{platform}.efi, which
is not a default location used by the NixOS bootloaders. rEFInd is able
to scan the volumes and detect the existing efi bootloaders, and boot
them successfully.
Following up https://github.com/NixOS/nixpkgs/pull/23665
Bootable USB-drives are not limited to ISO-images, there can be "normal" MBR/GPT-partitioned disk connected via USB-rack.
Also, "uas" implies "usb-storage", so there is no need to mention both.
This reverts commit 095fe5b43d.
Pointless renames considered harmful. All they do is force people to
spend extra work updating their configs for no benefit, and hindering
the ability to switch between unstable and stable versions of NixOS.
Like, what was the value of having the "nixos." there? I mean, by
definition anything in a NixOS module has something to do with NixOS...
Nothing probably uses this, but let's be pedantic and have the
pre-included channel on the install media be as close as possible to
what 'nix-channel --update' will give them.
The only remaining difference is that the channel adds programs.sqlite,
which is fundamentally unfixable.
- Add `imageName` and `imageBaseName` options similar to the `isoName`
and `isoBaseName` options
- Make the filename of the iso match what iso-image.nix does
- Generate a nix-support/hydra-build-products like iso-image.nix does
Add another option for debugging instead. Lots of users have been
complaining about this default behaviour.
This patch also cleans up the EFI bootloader entries in the ISO.
