Minimal ISO:
1m21 -> 2m25
625M -> 617M
Plasma5 ISO:
2m45 -> 5m18
1.4G -> 1.3G
Decompression speed stays about the same. It's just a few seconds for the whole
image anyways and, with that kind of speed, you're going to be bottlenecked by
IO long before the CPU.
It's been 8.5 years since NixOS used mingetty, but the option was
never renamed (despite the file definining the module being renamed in
9f5051b76c ("Rename mingetty module to agetty")).
I've chosen to rename it to services.getty here, rather than
services.agetty, because getty is implemantation-neutral and also the
name of the unit that is generated.
As per the in-line comment, this is where distros should configure it.
Not via kernel command line parameters.
As found by looking at the implementation, while exploring the cause of
a bug on the Raspberry Pi 4, it was found that `cma=` on the command
line parameters will overwrite the values a device tree will have
configured for a given platform.
With this, the more recent 5.4 vendor kernel boots just fine on the
Raspberry Pi 4 using our common configuration.
This includes setting up everything for the mainline Raspberry Pi 4
image.
In fact, the only difference left in the Raspberry Pi 4-specific image
is the kernel from the vendor.
Prior to this commit, installation over serial console would requiring
manually having to modify the kernel modeline, as described in
https://github.com/NixOS/nixpkgs/issues/58198 .
This is unnecessarily fiddly, so this commit adds a syslinux boot
entry that has serial enabled.
GRUB already has a serial console entry:
2c07a0800a/nixos/modules/installer/cd-dvd/iso-image.nix (L311-L317)
Why 115200 bps? This is already used in other places, e.g. https://github.com/NixOS/nixpkgs/pull/58196
I tested this change by building the image, booting the image, and
observing the boot process over serial:
$ cd nixos/
$ nix-build -A config.system.build.isoImage -I nixos-config=modules/installer/cd-dvd/installation-cd-minimal.nix default.nix
$ sudo cp /nix/store/arcl702c3z8xlndlvnfplq9yhixjvs9k-nixos-20.09pre-git-x86_64-linux.iso/iso/nixos-20.09pre-git-x86_64-linux.iso /dev/sdb
$ picocom -b 115200 /dev/ttyUSB0
This allows to perform `dd if= of=$img` after the image is built
which is handy to add e.g. uBoot SPL to the built image.
Instructions for some ARM boards sometimes contain this step
that needs to be performed manually, with this patch it can be
part of the nix file used to built the image.
This should have been done initially, as otherwise it gets awfully
awkward to boot into new generations by default.
This system-specific image wasn't expected to be long-lived, thus why it
didn't end up being polished much.
Reality shows us we may be stuck with it for a bit longer, so let's make
it easier to use for new users.
we use stdenv.hostPlatform.uname.processor, which I believe is just like
`uname -p`.
Example values:
```
(import <nixpkgs> { system = "x86_64-linux"; }).stdenv.hostPlatform.uname.processor
"x86_64"
(import <nixpkgs> { system = "aarch64-linux"; }).stdenv.hostPlatform.uname.processor
aarch64
(import <nixpkgs> { system = "armv7l-linux"; }).stdenv.hostPlatform.uname.processor
"armv7l"
```
The volumeID will now be in the format of:
nixos-$EDITON-$RELEASE-$ARCH
an example for the minimal image would look like:
nixos-minimal-20.09-x86-64-linux
Note we're not using wayland default in the graphical media because it
could cause headaches for Nvidia users. But the session is still available
if someone logs out.
In 87a19e9048 I merged staging-next into master using the GitHub gui as intended.
In ac241fb7a5 I merged master into staging-next for the next staging cycle, however, I accidentally pushed it to master.
Thinking this may cause trouble, I reverted it in 0be87c7979. This was however wrong, as it "removed" master.
This reverts commit 0be87c7979.
I merged master into staging-next but accidentally pushed it to master.
This should get us back to 87a19e9048.
This reverts commit ac241fb7a5, reversing
changes made to 76a439239e.
When 'grafting' '/nix/store/<hash>-loopback.cfg' from disk onto
'/boot/grub/loopback.cfg' on the iso, the parent 'grub' directory does not
exist yet. In this case it is automatically created and inherits its
attributes, including timestamp, from /nix/store.
This is correct/expected/intentional behavior of xorriso, but has the
undesired result of leaking the timestamps of /nix/store into the iso. For
this reason we put the loopback.cfg in a
'/nix/store/<hash>-loopback.cfg/grub/loopback.cfg' instead, so it will inherit
the attributes from the correctly-timestamped
'/nix/store/<hash>-loopback.cfg/grub' directory.
For the same reason we move '/EFI/boot/efi-background.png' down in the list
so it is grafted after its parent '/EFI/boot' directory is created with
the correct timestamp.
fixes#74944
Slim is abandoned and won't work with wayland.
It's in our best interest to use the display-manager
that makes most sense for Plasma5, sddm.
We've already moved on from it being default in #30890
and the graphical.nix profile, which the virtualbox profile uses,
has sddm anyway.
