All JARs in $pkg/share/java (for each $pkg in the build inputs) are
added to $CLASSPATH. Thus, you can say
buildInputs = [ setJavaClassPath someJavaDependency ];
and the JARs in someJavaDependency will be found automatically by
tools like javac or ant.
Note that the manual used to say that JARs should be installed in
lib/java; this is now share/java, following the Debian policy:
http://www.debian.org/doc/packaging-manuals/java-policy/x110.html
The directory share/java makes more sense because JARs are
architecture-independent. (Also, a quick grep shows that we were not
exactly consistent about this in Nixpkgs.)
This is a second attempt at unifying the generic and manual-config
kernel builds (see #412 for the last time).
The set of working kernel packages is a superset of those that work on
master, and as the only objection last time was the size of the $dev
closure and now both $out and $dev combined are 20M smaller than $out on
master (see message for ac2035287f), this
should be unobjectionable.
Signed-off-by: Shea Levy <shea@shealevy.com>
Based on access analysis with strace, I determined an essentially
minimal required set of files from the kernel source that was needed to
build all current kernel packages on 3.10, which ultimately resulted in
keeping 30M of source. Generalizing from that minimal set, which
required ad-hoc specifications of which headers outside of include/ and
arch/*/include and which files in the scripts/ directory should be kept,
to a policy of keeping all non-arch-specific headers that aren't part of
the drivers/ directory and the entire scripts/ directory added an
additional 17M, but there was nothing in the analysis that indicated
that that ad-hoc specification was at all complete so I think the extra
hit is worth the likely greater compatibility.
For reference, we now keep:
* All headers that are NOT in arch/${notTargetArch}/include or drivers/
* The scripts/ directory
* Makefile
* arch/${targetArch}/Makefile
IMO the most likely cause of future problems are the headers in
drivers/, but hopefully they won't actually be needed as they add 50M
Ideally kernel packages would only use include and
arch/${targetArch}/include, but alas this is observably not the case.
master:
* $out
* size: 234M
* references-closure: linux-headers, glibc, attr, acl, zlib, gcc,
coreutils, perl, bash
merge-kernel-builds:
* $out
* size: 152M
* references-closure: none
* $dev
* size: 57M
* references-closure: linux-headers, glibc, zlib, gcc
So even with the non-minimal set we still beat out master. Keeping the
drivers headers would make us only slightly bigger.
Signed-off-by: Shea Levy <shea@shealevy.com>
In most cases, this just meant changing kernelDev (now removed from
linuxPackagesFor) to kernel.dev. Some packages needed more work (though
whether that was because of my changes or because they were already
broken, I'm not sure). Specifics:
* psmouse-alps builds on 3.4 but not 3.10, as noted in the comments that
were already there
* blcr builds on 3.4 but not 3.10, as noted in comments that were
already there
* open-iscsi, ati-drivers, wis-go7007, and openafsClient don't build on
3.4 or 3.10 on this branch or on master, so they're marked broken
* A version-specific kernelHeaders package was added
The following packages were removed:
* atheros/madwifi is superceded by official ath*k modules
* aufs is no longer used by any of our kernels
* broadcom-sta v6 (which was already packaged) replaces broadcom-sta
* exmap has not been updated since 2011 and doesn't build
* iscis-target has not been updated since 2010 and doesn't build
* iwlwifi is part of mainline now and doesn't build
* nivida-x11-legacy-96 hasn't been updated since 2008 and doesn't build
Everything not specifically mentioned above builds successfully on 3.10.
I haven't yet tested on 3.4, but will before opening a pull request.
Signed-off-by: Shea Levy <shea@shealevy.com>
Also, Ant no longer has a build-time dependency on a particular JDK.
It finds the JDK via $JAVA_HOME or $PATH (by looking up javac). This
way, we don't need to have separate packages like apacheAntOpenJDK and
apacheAntOracleJDK. It also seems reasonable: after all, installing
GNU Make doesn't give you a C compiler either. It does mean that
instead of
buildInputs = [ ant ];
you now need to write something like
buildInputs = [ ant jdk ];
This unifies the "openjdk" and "openjre" packages. The JDK is placed
in the "out" output, the JRE in "jre".
Also, everything is now stored in $prefix/lib/openjdk, so the JDK/JRE
no longer pollute user environments with files like
"ASSEMBLY_EXCEPTION" at top-level.
This makes the disk usage footprint of building the kernel smaller in 3
ways:
1) There is no separate kernel source derivation
2) Rather than using the entire build tree, only the output of make
modules_prepare is kept in the $dev output (plus the module symbol
versioning file generated during the build)
3) Only the subset of the source tree known to be needed for external
builds is kept in $dev
Note that while 2) is supported by official kernel documentation, I
couldn't find any source describing what we need to keep for 3). I've
started with the bare minimum (the main Makefile is called by the
Makefile generated by make modules_prepare) and we can/should add more
as needed for kernelPackages.
Signed-off-by: Shea Levy <shea@shealevy.com>
This has three major benefits:
1. We no longer have two kernel build processes to maintain
2. The build process is (IMO) cleaner and cleaves more closely to
upstream. In partuclar, we use make install to install the kernel and
development source/build trees, eliminating the guesswork about which
files to copy.
3. The derivation has multiple outputs: the kernel and modules are in
the default `out' output, while the build and source trees are in a
`dev' output. This makes it possible for the full source and build tree
to be kept (which is expected by out-of-tree modules) without bloating
the closure of the system derivation.
In addition, if a solution for how to handle queries in the presence of
imports from derivations ever makes it into nix, a framework for
querying the full configuration of the kernel in nix expressions is
already in place.
Signed-off-by: Shea Levy <shea@shealevy.com>
- Unify the "single" and "float" variants, which are the same thing.
- Enable threads and openmp wrapper by default (they are very small).
- Don't use sse on i686, as I'm quite sure we have no warrant for that.
Cf. http://en.wikipedia.org/wiki/Pentium_Pro
- Disable static libs (big, no indication we need them).
- I tested most builds using fftw (they build OK).
In the most general case, the cross and native kernel may differ in
patches and configuration file as well as architecture, kernel target,
etc. It's probably overkill to support that case, but since it was
doable without much duplication and it will make integrating with the
existing cross-compilation support in the generic kernel I decided to
implement it anyway.
Signed-off-by: Shea Levy <shea@shealevy.com>
nix's version parsing treats the previous name as a package named
`linux' with version `${version}-source', when we really want a package
named `linux-source' with version `${version}'
Signed-off-by: Shea Levy <shea@shealevy.com>
This only affects the `oldaskconfig' make target, so it shouldn't really
affect current manual-config users, but it does make it more
straightforward to implement the generic kernel build on top of
manual-config.
Signed-off-by: Shea Levy <shea@shealevy.com>
If the config attrset is manually specified, we still want isYes,
isModule, etc. to work. But we let the passed in config attrset take
precedence, if for some reason the caller wants to provide their own
implementation of one or more of these functions.
Signed-off-by: Shea Levy <shea@shealevy.com>
With this, I was able to successfully compile a defconfig kernel for the
sheevaplug, though I didn't actually try to run it (not having a
sheevaplug myself).
For native compiles, the most significant difference is that the
platform's kernel target is built directly rather than hoping the
default make target will pull it in.
Also some stylistic improvements along the way.
Signed-off-by: Shea Levy <shea@shealevy.com>
In addition to replacing use of a feature with IMO confusing semantics,
this will also let us cleanly separate out all-packages.nix into
category-specific files without changing the structure of the pkgs
attrset.
Signed-off-by: Shea Levy <shea@shealevy.com>
fixes#1355. partial revert of f4d4e12c (introduced by #1313).
meta.priority is set to 6 (lower priority than standard) to resolve the
conflict of an exported gschemas.compiled for evince as for nm-applet.
this linked file is NOT consulted, as both binaries are wrapped to look
for their schemas in their nix store path first.
a better fix would avoid already avoid linking those gschemas.compiled
files into the environment.
Matplotlib is currently using hacked together build / install phases
which mimick this functionality of buildPythonPackage. This patch
changes the expression to remove the duplicated build scripting.
This patch also bumps up the HPN version of openssh so that it compiles
on top of 6.4. Along with the bump, a package was added for the high
performance networking version.
The gcmrekey patch was removed as this vulnerability is fixed in
version 6.4 onward. http://www.openssh.org/txt/gcmrekey.adv
Instead of applying all of the patches, this build pulls an archive from
the source code repo with all of the patches already applied. This is the
preferred way from http://www.vim.org/sources.php
Currently, btrfsprogs is misdetected by nix such that it requires
specifying btrfs-progs-v3.12 for install instead of just btrfs-progs.
This patch removes the v so that it now reads btrfs-progs-3.12 and is
properly detected by nix.
