Populate the egress_dead column for taking into account allocated bandwidth that can be removed because orders have been sent by the storage nodes. The bandwidth not used in these orders can be allocated again.
Change-Id: I78c333a03945cd7330aec052edd3562ec671118e
In the situation where the flushes take longer than the incoming
rate of writes, the RollupsWriteCache will take every connection
in the database pool and use them forever. Instead of doing that
and taking down satellite availability, bound the number of flush
operations that it will perform and drop incoming writes earlier
to keep memory usage constant.
Adds monitoring events for if any flushes or updates are lost.
Change-Id: I81b169b73501ee9b999f4b03d1e79645fc56f167
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
In the past ExpirationDate was available inside CreatePutRepairOrderLimits
but this was removed since the metabase segment was missing the ExpiresAt field.
Now ExpiresAt field is available in the metabase segment
and can be set correctly while executing NewSignerRepairPut.
Change-Id: I068c07492ab27bde2c44477bbd32c5872edd024a
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
the very common case is that the node api version is
indeed at least the requested version, so query for
that first to avoid write traffic.
Change-Id: Ib047d93078205bc07fee75d1f635503b792307f0
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Previously the object range was not used for calculating order limit.
This meant that even if you were downloading only a small range it would
account bandwidth based on the full segment.
This doesn't fully address the accounting since the lazy segment
downloads do not send their requested range nor requested limit.
Change-Id: Ic811e570c889be87bac4293547d6537a255078da
project_bandwidth_daily_rollups table
We want to calculate used bandwidth better so we need to calculate it
from allocated and settled bandwidth. To do this we need first populate
this new table.
https://storjlabs.atlassian.net/browse/PG-56
Change-Id: I308b737bf08ee48ce4e46a3605697ab2095f7257
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
The previous default FlushBatchSize of 10000 was causing major
slow down in select and insert statements on bucket_bandwidth_rollups.
We saw on the saltlake satellite that a FlushBatchSize of 1000 helped
reduce contention and query latency.
Change-Id: Ib95e73482219bc5aedc11925b1849fa5999774ba
Remove the orders Settlement endpoint because it isn't used and it was
already always returning an error.
Change-Id: I81486fbe7044a1444182173bc0693698ee7cfe7e
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
CreateGetOrderLimits is not used anymore because we have CreateGetOrderLimits2. We need to remove old method and fix name of second.
Change-Id: I59148b8d28fc9dbab7d452c884319125a02745d1
SatelliteAddress in OrderLimit is not being used anymore and some
satellite addresses may consume too much bytes.
Change-Id: Ic7a0efe5b6211c2f3b91af67b293cde98b29d074
Avoid using project uuid string representation, because
it uses more bandwidth.
This reduces the encrypted metadata size from 118 -> 97 bytes.
Change-Id: Ic53a81b83acc065f24f28cd404f9c0b1fe592594
Since the Satellite now requires the order encryption functionality (since serial_number table is deprecated) to properly function, we can remove the config flag to turn on/off the feature.
Change-Id: Ie973f72a9a05a81cef9e53dc9c99d22c940c2488
This PR contains the minimum changes needed to stop inserting into the serial_numbers table. This is the first step in completely deprecating that table.
The next step is to create another PR to remove the expiredSerial chore, fix more tests, and remove any other methods on the serial_number table.
Change-Id: I5f12a56ebf3fa4d1a1976141d2911f25a98d2cc3
We want to stop using the serial_numbers table in satelliteDB. One of the last places using the serial_numbers table is when storagenodes settle orders, we look up the bucket name and project ID from the serial number from the serial_numbers table.
Now that we have support to add encrypted metadata into the OrderLimit, this PR makes use of that and now attempts to read the project ID and bucket name from the encrypted orderLimit metadata instead of from the serial_numbers table. For backwards compatibility and to ensure no errors, we will still fallback to the old way of getting that info from the serial_numbers table, but this will be removed in the next release as long as there are no errors.
All processes that create orderLimits must have an orders.encryption-keys set. The services that create orderLimits (and thus need to encrypt the order metadata) are the satellite apiProcess, the repair process, audit service (core process), and graceful exit (core process). Only the satellite api process decrypts the order metadata when storagenodes settle orders. This means that the same encryption key needs to be provided in the config for the satellite api process, repair process, and the core process like so:
orders.include-encrypted-metadata=true
orders.encryption-keys="<"encryptionKeyID>=<encryptionKey>"
Change-Id: Ie2c037971713d6fbf69d697bfad7f8b672eedd66
Currently flag parsing seems to call Set twice, which causes problems
with encryption keys. We can clear for every set for now.
Change-Id: Id5c695b4020194ac1c50a2da9c7d2a896cb9216f
CRDB doesn't like large deletes. While testing in the POC environment we found that deletes on the serial_numbers table could take hours. This change limits deletes to 1000 at a time (configurable) to avoid blocking other queries.
Change-Id: I08455e25db1574579dd4d7b7125a08e9c913dff1
With the new phase 3 order submission, orders can be added to the
storage and bandwidth rollup tables at timestamps before the most recent
rollup was run. This change shifts the start time of each new rollup
window to account for any unexpired orders that might have been added
since the previous rollup.
A satellitedb migration is necessary to allow upserts in the
accounting_rollups table when entries with identical node_ids and
start_times are inserted.
Change-Id: Ib3022081f4d6be60cfec8430b45867ad3c01da63
Before manipulating order information on storagenodes we need to wait
for the orders to propagate to the database. Some of that happens
async with uplink.
Change-Id: Iaacfd7db0909ab5d2831d06388e5fb27b6d4778f
It turns out we need to make 2 more changes in order for the new order submission phase 3 to get deployed.
This PR makes 2 changes:
1) when the rollup service deletes tallies, we now keep tallies around until orders expire (vs 1 day like before).
2) the reported rollup chore will now write the storagenode_bandwidth_rollups to a new table _phase2 as an intermediary step so it doesn't conflict with phase 3 order settlement.
These changes need to be deployed for 2 days before we can turn on phase 3 of the new orders settlement workflow.
Change-Id: Iafbff577ba7d55f8f17b7db857311b2ce799de60
This change is adjusting metainfo endpoint to use metabase for uploading
and downloading remote objects. Inline segments will be added later.
Change-Id: I109d45bf644cd48096c47361043ebd8dfeaea0f3
