Commit Graph

283 Commits

Author SHA1 Message Date
Kaloyan Raev
b8c6fb764c satellite/metainfo: add metabase to metainfo service
Change-Id: Ie3ff238b138d8a57d99e32b13f7a71aa624d53e3
2020-10-30 12:49:47 +02:00
Egon Elbre
e0dca4042d all: add pprof labels for debugger
By using pprof.Labels debugger is able to show service/peer names in
goroutine names.

Change-Id: I5f55253470f7cc7e556f8e8b87f746394e41675f
2020-10-29 15:10:07 +00:00
Egon Elbre
caefde6b32 private/{dbutil,tagsql}: pass ctx to database opening
Database opening usually dial and hence we should pass ctx to them.

Change-Id: Iaa2875981570d83e65be3710f841cf30349f807b
2020-10-29 10:51:29 +00:00
Egon Elbre
89ce1fe626 storagenode/storagenodedb: add ctx to OpenNew and OpenExisting
Database opening usually dial and hence we should pass ctx to them.

Change-Id: I9160ae95829f22f347bd525904898a47279a7427
2020-10-29 09:52:37 +02:00
Egon Elbre
d0beaa4a87 pkg/revocation: pass ctx into opening the database
Opening a databases requires ctx, this is first step to passing ctx
to the appropriate level.

Change-Id: I12700f39a320206d8a2a4e054452319f8585b44b
2020-10-29 07:15:36 +00:00
Jessica Grebenschikov
f5880f6833 satellite/orders: rollout phase3 of SettlementWithWindow endpoint
Change-Id: Id19fae4f444c83157ce58c933a18be1898430ad0
2020-10-26 14:56:28 +00:00
Yaroslav Vorobiov
139a7ee959 private/migrate: add ablity to create dbs during migration
Use tagsql.DB pointer as step database, to propagate changes
back and forth between actual database and migration.
Adds CreateDB operation to the migration step to be able to
create new dbs before executing migration action.
Adjusts storagenode database migration to use inner tagsql.DB
pointer of each database as step.DB.
Adjusts satellite dabase migration, adds proxy migrationDB field
to satellite db that wraps itself as tagsql.DB, pointer of which
is used as step.DB.

Change-Id: Ifed4de5b01a356cf7b37db64d2eaeb7b61982c5c
2020-10-15 15:28:04 +03:00
Egon Elbre
2268cc1df3 all: fix linter complaints
Change-Id: Ia01404dbb6bdd19a146fa10ff7302e08f87a8c95
2020-10-13 15:59:01 +03:00
Stefan Benten
14a2050b8d pkg/auth: move package to consoleauth
To avoid further name collisions, the very broad named package gets moved into
the consoleauth package where its also mainly being used.

Change-Id: Ie563c9700adbf0553baca2b7b8ba4a1d9c29d144
2020-10-06 14:15:07 +02:00
Egon Elbre
4e8d53c8fb private/dbutil/pgutil: ensure storagenode doesn't depend on pgx
pgx is a large dependency and there's no need to include it in
storagenode binary.

Change-Id: I49c304c6420733d5f095d7edb35d32811210e41a
2020-09-30 14:28:47 +00:00
Yaroslav Vorobiov
a840cb71e7 storagenode: check db version before run
Change-Id: I912f63fd62f2bff10341346c28dfb92fcd683806
2020-09-30 10:58:09 +00:00
Egon Elbre
c23a8e3b81 go.mod: update pgx to v4.9.0
Fix query to use TextArray instead of VarcharArray.
Fix queries to use the correct type.

Change-Id: Ibb7e55adba277d05778118d81ca697470e72c374
2020-09-29 19:03:08 +00:00
Egon Elbre
2d27bc8787 satellite/satellitedb: separate cockroach for migration tests
Currently Cockroach migration test is the most heavy with regards to
schema changes. This causes other tests to time out. This adds an
alternate cockroach instance that is used for migration tests.

Change-Id: I01fe9313527ff002f0bb0914dd52c3645b8eaf6d
2020-09-29 09:31:33 +00:00
Jessica Grebenschikov
4a2c66fa06 satellite/accounting: add cache for getting project storage and bw limits
This PR adds the following items:
1) an in-memory read-only cache thats stores project limit info for projectIDs

This cache is stored in-memory since this is expected to be a small amount of data. In this implementation we are only storing in the cache projects that have been accessed. Currently for the largest Satellite (eu-west) there is about 4500 total projects. So storing the storage limit (int64) and the bandwidth limit (int64), this would end up being about 200kb (including the 32 byte project ID) if all 4500 projectIDs were in the cache. So this all fits in memory for the time being. At some point it may not as usage grows, but that seems years out.

The cache is a read only cache. When requests come in to upload/download a file, we will read from the cache what the current limits are for that project. If the cache does not contain the projectID, it will get the info from the database (satellitedb project table), then add it to the cache.

The only time the values in the cache are modified is when either a) the project ID is not in the cache, or b) the item in the cache has expired (default 10mins), then the data gets refreshed out of the database. This occurs by default every 10 mins. This means that if we update the usage limits in the database, that change might not show up in the cache for 10 mins which mean it will not be reflected to limit end users uploading/downloading files for that time period..

Change-Id: I3fd7056cf963676009834fcbcf9c4a0922ca4a8f
2020-09-25 16:28:49 +00:00
Stefan Benten
8b4b44d42b private/web: fix ratelimter IP handling
Change-Id: Idab43f15fb5b90d9d831193d0e7119e64513f271
2020-09-05 18:39:49 +02:00
Jennifer Johnson
4e2413a99d satellite/satellitedb: uses vetted_at field to select for reputable nodes
Additionally, this PR changes NewNodeFraction devDefault and testplanet config from 0.05 to 1.
This is because many tests relied on selecting nodes that were reputable based on audit and uptime
counts of 0, in effect, selecting new nodes as reputable ones.
However, since reputation is now indicated by a vetted_at db field that is explicitly set
rather than implied by audit and uptime counts, it would be more complicated to try to
update all of the nodes' reputations before selecting nodes for tests.
Now we just allow all test nodes to be new if needed.

Change-Id: Ib9531be77408662315b948fd029cee925ed2ca1d
2020-09-04 16:45:32 +00:00
Michal Niewrzal
aa47e70f03 satellite/metainfo: use metabase.SegmentKey with metainfo.Service
Instead of using string or []byte we will be using dedicated type
SegmentKey.

Change-Id: I6ca8039f0741f6f9837c69a6d070228ed10f2220
2020-09-03 15:11:32 +00:00
Egon Elbre
77b53bd21c private/lifecycle: log fatal ending to a runner
Change-Id: If07b62dad7f4ac235dd51a3a217c2c56d30978ad
2020-09-03 16:54:40 +03:00
Cameron Ayer
ca0c1a5f0c storagenode/{monitor,pieces}, storage/filestore: add loop to check storage directory writability
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.

Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
2020-08-31 21:20:49 +00:00
Moby von Briesen
5d21e85529 satellite/audit/queue: Separate audit queue into two separate structs.
* The audit worker wants to get items from the queue and process them.
* The audit chore wants to create new queues and swap them in when the
old queue has been processed.

This change adds a "Queues" struct which handles the concurrency
issues around the worker fetching a queue and the chore swapping a new
queue in. It simplifies the logic of the "Queue" struct to its bare
bones, so that it behaves like a normal queue with no need to understand
the details of swapping and worker/chore interactions.

Change-Id: Ic3689ede97a528e7590e98338cedddfa51794e1b
2020-08-31 20:51:25 +00:00
stefanbenten
4645805b18 private/dbutil: set connMaxLifetime to 30 minutes
To prevent longlived unused connections, set the maximum time to 30 minutes to
prevent proxies and loadbalancers forcefully cutting the connection.
This helps in scenarios with low load/requests to a DB.

Change-Id: I7dba15ef97f6f6541e872a6fb1d3a9bbbfe5bb50
2020-08-28 18:00:41 +00:00
Bill Thorp
dbb53151f0 private/testplanet: Decrease metainfo MaxBuckets test value to speed testing.
TestMaxOutBuckets is one of our slower tests (50-90s).
This change seems to make it 2-12s.

It reduces the number of buckets that need to be created.
It also removes unnecessary storage nodes.

Change-Id: I1012fc6e9258b2f7674b16da4e8b418741c93eea
2020-08-26 17:31:31 +00:00
Jeff Wendling
91698207cf storagenode: live tracking of order window usage
This change accomplishes multiple things:

1. Instead of having a max in flight time, which means
   we effectively have a minimum bandwidth for uploads
   and downloads, we keep track of what windows have
   active requests happening in them.

2. We don't double check when we save the order to see if it
   is too old: by then, it's too late. A malicious uplink
   could just submit orders outside of the grace window and
   receive all the data, but the node would just not commit
   it, so the uplink gets free traffic. Because the endpoints
   also check for the order being too old, this would be a
   very tight race that depends on knowledge of the node system
   clock, but best to not have the race exist. Instead, we piggy
   back off of the in flight tracking and do the check when
   we start to handle the order, and commit at the end.

3. Change the functions that send orders and list unsent
   orders to accept a time at which that operation is
   happening. This way, in tests, we can pretend we're
   listing or sending far into the future after the windows
   are available to send, rather than exposing test functions
   to modify internal state about the grace period to get
   the desired effect. This brings tests closer to actual
   usage in production.

4. Change the calculation for if an order is allowed to be
   enqueued due to the grace period to just look at the
   order creation time, rather than some computation involving
   the window it will be in. In this way, you can easily
   answer the question of "will this order be accepted?" by
   asking "is it older than X?" where X is the grace period.

5. Increases the frequency we check to send up orders to once
   every 5 minutes instead of once every hour because we already
   have hour-long buffering due to the windows. This decreases
   the maximum latency that an order will be reported back to
   the satellite by 55 minutes.

Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
2020-08-19 19:42:33 +00:00
Cameron Ayer
0155c21b44 private/testplanet, storagenode/{monitor,pieces}: write storage dir verification file on run and verify on loop
On run, write the storage directory verification file.

Every time the node runs it will write the file even if it already exists.
The reason we do this is because if the verification file is missing, the SN
doesn't know whether it is an incorrect directory, or it simply hasn't written
the file yet, and we want to keep nodes running without needing operator intervention.

Once this change has been a part of the minimum version for several releases,
we will move the file creation from the run command to the setup
command. Run will only verify its existence.

Change-Id: Ib7d20e78e711c63817db0ab3036a50af0e8f49cb
2020-08-19 19:12:21 +00:00
Cameron Ayer
586e6f2f13 private/testblobs, storage, storage/filestore: add storage dir verification to filestore
Sometimes SNOs fail to properly configure or lose connection to their storage directory
which can result in DQ. This causes unnecessary repair and is unfortunate for all parties.

This change introduces the creation of a special file in the storage directory at runtime
containing the node ID. While the storage node runs, it periodically verifies that it can
find said file with the correct contents in the correct location. If not, the node will
shut down with an error message.

This change will solve the issue of nodes losing access to the storage directory, but it will not
solve the issue of nodes pointing to the wrong directory, as the identifying file is created each
time the node starts up. After this change has been the minimum version for a few releases, we will
remove the creation of the directory-identifying file from the storage node run command and add it
to the setup command.

Change-Id: Ib7b10e96ac07373219835e39239e93957e7667a4
2020-08-19 17:18:14 +00:00
Yingrong Zhao
14ad7a4f1c satellite/metainfo: add limiter for objectdeletion and piecedeletion
services

This PR adds a limiter on the amount of concurrent objects deletion can be handled so
we don't run out of memory.

Change-Id: Id2ce368af6f86845fcdfd34cb2f5e460efe9b272
2020-08-19 16:08:29 +00:00
Moby von Briesen
708cb48aa6 storagenode/orders: implement orders filestore on storagenode
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.

The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.

Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
2020-08-19 15:00:35 +00:00
Ivan Fraixedes
7f8df74070
private/testplanet: Use config with name set when empty
In testplanet Run function we create a new configuration variable on
each t.Run for setting the value to the config name field when it's
empty, however the new copy of the configuration was not used.

Change-Id: I9da34e743f9648850c96556eab0349e742db3aac
2020-08-19 13:12:10 +02:00
Egon Elbre
94a09ce20b all: add missing dots
Change-Id: I93b86c9fb3398c5d3c9121b8859dad1c615fa23a
2020-08-11 17:50:01 +03:00
Michal Niewrzal
88dcc93f3c satellite/metainfo: use user PartnerID for bucket attribution
Change-Id: I20f1bd432333f9b37ca8fb457c349eff94ffb392
2020-08-06 13:14:07 +00:00
Moby von Briesen
e02adfe5e9 satellite/overlay/config.go: Add AuditHistoryConfig to overlay
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.

Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
2020-08-04 18:18:56 +00:00
Jeff Wendling
85a74b47e7 satellite/orders: 3-phase rollout
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.

In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).

In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.

In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.

The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.

Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.

Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
2020-08-03 17:01:42 +00:00
Rafael Gomes
935f44ddb7 satellite/metainfo: Add Delete Service config
Change-Id: I0a6e3ce1adfe1488eb23da9dda92877af1834599
2020-08-03 14:28:02 +00:00
Michal Niewrzal
20184d3604 satellite/metainfo: move TestAttributionReport to attribution tests
Additionally test was simplified by adding ability to set user agent for
testplanet uplink.

Change-Id: I82942c2280562b5118a42aa8e1e0f53092f8dbe1
2020-07-30 19:18:15 +00:00
Bill Thorp
b265b7f555 satellite/console: make paywall optional
Add a config so that some percent of users require credit cards /
account balances
in order to create a project or have a promotional coupon applied

UI was updated to match needed paywall status

At this point we decided not to use a field to store if a user is in an
A/B
test, and instead just use math to see if they're in a test.  We decided
to use MD5 (because its in Postgres too) and User UUID for that math.

Change-Id: I0fcd80707dc29afc668632d078e1b5a7a24f3bb3
2020-07-28 10:57:49 +00:00
Qweder93
92efffb48a storagenode/version: notification flow now based on cursor, chore_test added, versioncontrol added to reconfigure.
Change-Id: I70713def8d585228270ec5a8c586ecc5b4d510c4
2020-07-23 14:13:24 +00:00
Ethan
cfca021839 satellite/accounting: Add chore to cleanup old project bandwidth rollups data
Removes old project_bandwidth_rollups records that are no longer used.

Uses a retain months configuration to determine how many months to save.  Current month cannot be removed.
Tests retainMonths=-1, 0, 2

Change-Id: Ia4be2546cdb28802427acf41ecd85ad66df3e62c
2020-07-22 18:56:49 +00:00
paul cannon
fd7bfc94fe private/dbutil: don't sort column names in an index
The order in which column names appear in an index should be
deterministic (for both our sqlite and postgresql code). Also, the order
is very relevant as to whether a given schema is correct.

Change-Id: I227ea057fcd9c3e967dd241a7e1c787d1bc4baa1
2020-07-17 10:07:01 +00:00
Egon Elbre
b84923558b satellite: fix scoping, formatting
Change-Id: I21ef9edc2d449d75ad74891df7f966fb150d80fd
2020-07-16 19:13:14 +03:00
Egon Elbre
e70da5cd4e all: fix comments
Change-Id: I2d2307e3fab87de47a72b3595d051e2c95ff4f8a
2020-07-16 19:13:14 +03:00
Egon Elbre
080ba47a06 all: fix dots
Change-Id: I6a419c62700c568254ff67ae5b73efed2fc98aa2
2020-07-16 14:58:28 +00:00
stefanbenten
9ace375ee0 satellite/{console,satellitedb}: change project limiting based on new users field
This change switches the backend logic to use the new DB column on the users table to restrict project creation.
Furthermore it back fills the existing limits from registration tokens to the new column to ensure no users are reset to the new default.

UI is updated to reflect ability to create several projects

Change-Id: Ie29157430ae6b065411ca4c4557c9f1be69cdc4f
2020-07-16 10:57:47 +00:00
Jennifer Johnson
784a156eea satellite: prevents uplink from creating a bucket once it exceeds the max bucket allocation.
Change-Id: I4b3822ed723c03dbbc0df136b2201027e19ba0cd
2020-07-15 17:27:05 +00:00
stefanbenten
257855b5de all: replace == comparison with errors.Is
Change-Id: I05d9a369c7c6f144b94a4c524e8aea18eb9cb714
2020-07-14 15:50:25 +00:00
stefanbenten
1149417615 satellite/admin: cleanup parameter handling
We passed in revocationDB and metainfoDB for no reason.
Lets remove it from the dependency list to further reduce the footprint.

Change-Id: Ic0317bb92670fbd305d4a8b0ed1cb82858e2f6d3
2020-07-14 13:53:09 +02:00
Jessica Grebenschikov
8abb907010 satellite/orders: add settle orders with window
Why: We need a way to cut down on database traffic due to bandwidth
measurement and tracking.

What: This changeset is the Satellite side of settling orders in 1 hr windows.
See design doc for more details: https://review.dev.storj.io/c/storj/storj/+/1732

Change-Id: I2e1c151e2e65516ebe1b7f47b7c5f83a3a220b31
2020-07-13 15:41:29 -07:00
paul cannon
bbdb351e5e all: use jackc/pgx in place of lib/pq
What:

Use the github.com/jackc/pgx postgresql driver in place of
github.com/lib/pq.

Why:

github.com/lib/pq has some problems with error handling and context
cancellations (i.e. it might even issue queries or DML statements more
than once! see https://github.com/lib/pq/issues/939). The
github.com/jackx/pgx library appears not to have these problems, and
also appears to be better engineered and implemented (in particular, it
doesn't use "exceptions by panic"). It should also give us some
performance improvements in some cases, and even more so if we can use
it directly instead of going through the database/sql layer.

Change-Id: Ia696d220f340a097dee9550a312d37de14ed2044
2020-07-13 15:54:41 +00:00
Egon Elbre
9dc9cd8a17 tests: allow STORJ_TEST_POSTGRES
STORJ_POSTGRES_TEST naming was not consistent with STORJ_SIM_POSTGRES.

This allows to use STORJ_TEST_POSTGRES for clarity, it still has a
fallback to STORJ_POSTGRES_TEST.

Change-Id: I6f294c66c80fcfd6750fea2a89795f3b7f5dd691
2020-07-10 16:43:49 +03:00
Egon Elbre
4869cfc9a4 satellite/vouchers: remove deprecated endpoint
Change-Id: I0a754217d9424253e448126face6594bc143f412
2020-07-10 12:38:46 +00:00
Stefan Benten
9dbd511396
private/dbutil: reduce db connection defaults (#3920) 2020-07-08 19:59:42 +02:00