package in audit
This PR implements reputation store and replace overlay in audit service
to use such store for storing node's audit stats.
In order to keep the changeset smaller, most of the changes in this PR is for copying audit logic in overlay to
reputation package. In a following PR, the duplicating code will be
removed from overlay.
Change-Id: I16c12494a0970f44c422b26cf603c1dc489e5bc1
Added MFA passcode and recovery code field for token requests.
Added endpoints for MFA-related activity: enabling MFA,
disabling MFA, generating a new MFA secret key, and
generating new MFA recovery codes.
Change-Id: Ia1443f05d3a2fecaa7f170f56d73c7a4e9b69ad5
Current tally is calculating storage both for buckets and
storage nodes. This change is moving nodes storage
calculation to separate service that will be using
segment loop.
Change-Id: I9e68bfa0bc751c82ff738c71ca58d311f257bd8d
The user must complete a reCAPTCHA in order to register.
ReCAPTCHA verification failure results in rejection of the
registration attempt.
Change-Id: I34ba7db414d756fd1aaebdc3d19cccbfc7fc1ea3
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Currently we did not limit the "as of system time" for iterating over
objects table. Using just an interval would cause problems with the
tests. That could be overcome skipping that interval for tests
altogether, however, we should probably test those more to ensure that
GC stays working as intended.
This is a safer code, however, maybe not as straigthforward as it could
be.
Change-Id: I374f77783b2af42bb6da846735ceea20a7ce5e60
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
When services take long to shutdown it's useful to get a stack trace for
diagnosing the underlying problem.
Change-Id: Ic73a45741dfbe8fdddafd56a5b72121da886d133
Add test with NotBefore and NotAfter restricted permission to verify that we don't have an access to bucket
Change-Id: I7ec98a5b02c0098ee7ec81034278398f4435f1cf
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Initially metabase was developed separately and it was useful to have a
separate environment flag for tests, however, it's more convenient to
use the same as rest of the testsuite.
Change-Id: Ia4d79be27ce5911cbae68d57cdf0b30f63459444
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
Rename the functions that are prefixed with 'New' which connect with
Redis by 'Open' to make clear that they perform network operations.
Change-Id: I1351e89a642e8e2c2586626646315ad0fb2c6242
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
Update the Redis dependency to use the last major production version.
The last version accepts a context parameter in all the network methods
so it allows us to pass it through them.
Change-Id: I34121b2ec3c2728602115c724933ad24c9e6e4fd
Migration step 148 will cause errors because we missed some
references to the columns being dropped. Removing the step
altogether causes problems with backwards compatibility tests
because the change already exists in the latest release tag.
To circumvent, we change v148 to an empty migration.
Add methods FindTable and RemoveColumn in private/dbutil/dbschema
Change-Id: Ia527e95b88a88c5dc82800928ce6f8cfb879e334
Move a specific interface & types used for testing to be a private
subpackage with a name that clearly identifies it for testing purpose.
Change-Id: I646cf3b6f0a3b518a6f9a125998dc5a02df02db6
Pregenerate the database schema we should use for most tests.
Currently, Cockroach is slow with regards to migration and it's
better if it happens in as few transactions as possible.
This reduces test time from ~21min to ~15min.
Change-Id: Ife8117053e6b9ecf3c93fe63677edf15d4d7c254
In ec client in uplink we have two methods Put and PutSingleResult. Logic is the same but result for PutSingleResult is combined into single var. We would like to remove unused Put method but to do this it needs to be replaced in test.
Change-Id: Ia65eff3ecc9e68d5b3180b557ea82fa31d3c969c
Trackers check whether rows, transactions and statments are properly
closed when tests finish. Stmt wasn't closing the tracker, which
ended up causing false-positives.
Change-Id: I5ac57bc1579f903f19283b85a1996c06ce87741b
This PR removes all back-end related referral program code including the
marketing portal.
We will have a separate PR for front-end code and database migration to
drop `offers` and `usercredits` table
Change-Id: If59f952cddfe0558a7dc03a0eac7cc1081517f88
Adds checks in the existing NeedsRetry cockroachutil method
to see if the error is from the net package and a tcp error,
in which case it should retry. Also adds checks for if the
error contains EOF-- we don't retry in this case because it's
unclear if the query succeeded or failed.
These checks are needed to prevent our app from crashing when
it gets "connection reset by peer" and other tcp errors that
we've seen frequently coming from the metainfo loop.
Change-Id: I194d4b120082393cb6dbda2dd86b44f4696a66a4
allow disabling tcp/quic
In order to have more control of a server so that we can
simulate connection failures in `testplanet`, this PR changes
quic.Listener to accept an existing UDPConn instead of relying on the
quic-go library to create the UDPConn.
This PR also adds two flags on the `server.Config` struct to allow
enabling/disabling tcp/tls listener and quic listener. By default, they
are both set to true.
- `DisableTCPTLS`: internal flag, disables tcp/tls listener.
- `DisableQUIC`: hidden flag, disables quic listener
By making the `DisableQUIC` a hidden flag, it allows storagenode operators to
have the ability to disable quic traffic in case their set up can't work
with udp traffic.
Change-Id: I853b12435d988b9c41ad9b873fd57480d792e378
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
The rollup archiver chore moves bucket bandwidth rollups and
storagenode rollups that are older than a given duration
to two new archive tables.
Change-Id: I1626a3742ad4271bc744fbcefa6355a29d49c6a5
This PR introduces a new listener that can listen for quic traffic on
both storagenodes and satellites.
Change-Id: I5eb5bc82c37dde20d3be2ec8fa5f69c18fae0af0
We wanto have single uplink branch for standard and multipart-upload satellite but some tests are using helper methods from multipart. This change adds methods used by uplink test.
Change-Id: I82352ed56674ff7e8743b58061ba594018e78e3b
On servers with non-UTC it would have calculated a different month boundary.
If node joined in current month calculations will be related on amount of days node've been working.
Change-Id: Ie572b197f50c6cdff5a044a53dfb5b9138f82f24
Full scope:
private/testplanet,satellite/{overlay,satellitedb}
Description:
In most cases, downtime tracking with audits will eventually lead
to DQ for nodes who are unresponsive. However, if a stray node has no
pieces, it will not be audited and will thus never be disqualified.
This chore will check for nodes who have not successfully been contacted
in some set time and DQ them.
There are some new flags for toggling DQ of stray nodes and the timeframes
for running the chore and how long nodes can go without contact.
Change-Id: Ic9d41fdbf214736798925e728245180fb3c55615
Avoid using project uuid string representation, because
it uses more bandwidth.
This reduces the encrypted metadata size from 118 -> 97 bytes.
Change-Id: Ic53a81b83acc065f24f28cd404f9c0b1fe592594
Since the Satellite now requires the order encryption functionality (since serial_number table is deprecated) to properly function, we can remove the config flag to turn on/off the feature.
Change-Id: Ie973f72a9a05a81cef9e53dc9c99d22c940c2488
We are no longer planning on implementing downtime penalization using
the method described in
docs/blueprints/archive/storage-node-downtime-tracking-deprecated.md.
Now, we are implementing the design described in
docs/blueprints/storage-node-downtime-tracking-with-audits.md.
This change removes the downtime estimation chores from the satellite
core as well as the package satellite/downtime. A future change will
remove the database table.
Change-Id: I1a1d3cf9dceeba36255d25243294865b89925518
We want to stop using the serial_numbers table in satelliteDB. One of the last places using the serial_numbers table is when storagenodes settle orders, we look up the bucket name and project ID from the serial number from the serial_numbers table.
Now that we have support to add encrypted metadata into the OrderLimit, this PR makes use of that and now attempts to read the project ID and bucket name from the encrypted orderLimit metadata instead of from the serial_numbers table. For backwards compatibility and to ensure no errors, we will still fallback to the old way of getting that info from the serial_numbers table, but this will be removed in the next release as long as there are no errors.
All processes that create orderLimits must have an orders.encryption-keys set. The services that create orderLimits (and thus need to encrypt the order metadata) are the satellite apiProcess, the repair process, audit service (core process), and graceful exit (core process). Only the satellite api process decrypts the order metadata when storagenodes settle orders. This means that the same encryption key needs to be provided in the config for the satellite api process, repair process, and the core process like so:
orders.include-encrypted-metadata=true
orders.encryption-keys="<"encryptionKeyID>=<encryptionKey>"
Change-Id: Ie2c037971713d6fbf69d697bfad7f8b672eedd66
the immediate need is to be able to move the repair queue back out
of cockroach if we can't save it.
Change-Id: If26001a4e6804f6bb8713b4aee7e4fd6254dc326
CRDB doesn't like large deletes. While testing in the POC environment we found that deletes on the serial_numbers table could take hours. This change limits deletes to 1000 at a time (configurable) to avoid blocking other queries.
Change-Id: I08455e25db1574579dd4d7b7125a08e9c913dff1
Previously, we created a new file to use for directory verification
every time the storage node starts. This is not helpful if the storage node
points to the wrong directory when restarting. Now we will only create the file
on setup. Now the file should be created only once and will be verified at
runtime.
Change-Id: Id529f681469138d368e5ea3c63159befe62b1a5b
Make metainfo.RSConfig a valid pflag config value. This allows us to
configure the RSConfig as a string like k/m/o/n-shareSize, which makes
having multiple supported RS schemes easier in the future.
RS-related config values that are no longer needed have been removed
(MinTotalThreshold, MaxTotalThreshold, MaxBufferMem, Verify).
Change-Id: I0178ae467dcf4375c504e7202f31443d627c15e1
Currently we were picking databases randomly for testing,
however a round-robin picking might have more predictable
behavior and cause less cockroach timeouts.
Change-Id: I74ac0d5b38c89452d3c46d3811330e46e7449514
Use tagsql.DB pointer as step database, to propagate changes
back and forth between actual database and migration.
Adds CreateDB operation to the migration step to be able to
create new dbs before executing migration action.
Adjusts storagenode database migration to use inner tagsql.DB
pointer of each database as step.DB.
Adjusts satellite dabase migration, adds proxy migrationDB field
to satellite db that wraps itself as tagsql.DB, pointer of which
is used as step.DB.
Change-Id: Ifed4de5b01a356cf7b37db64d2eaeb7b61982c5c
To avoid further name collisions, the very broad named package gets moved into
the consoleauth package where its also mainly being used.
Change-Id: Ie563c9700adbf0553baca2b7b8ba4a1d9c29d144
Currently Cockroach migration test is the most heavy with regards to
schema changes. This causes other tests to time out. This adds an
alternate cockroach instance that is used for migration tests.
Change-Id: I01fe9313527ff002f0bb0914dd52c3645b8eaf6d
This PR adds the following items:
1) an in-memory read-only cache thats stores project limit info for projectIDs
This cache is stored in-memory since this is expected to be a small amount of data. In this implementation we are only storing in the cache projects that have been accessed. Currently for the largest Satellite (eu-west) there is about 4500 total projects. So storing the storage limit (int64) and the bandwidth limit (int64), this would end up being about 200kb (including the 32 byte project ID) if all 4500 projectIDs were in the cache. So this all fits in memory for the time being. At some point it may not as usage grows, but that seems years out.
The cache is a read only cache. When requests come in to upload/download a file, we will read from the cache what the current limits are for that project. If the cache does not contain the projectID, it will get the info from the database (satellitedb project table), then add it to the cache.
The only time the values in the cache are modified is when either a) the project ID is not in the cache, or b) the item in the cache has expired (default 10mins), then the data gets refreshed out of the database. This occurs by default every 10 mins. This means that if we update the usage limits in the database, that change might not show up in the cache for 10 mins which mean it will not be reflected to limit end users uploading/downloading files for that time period..
Change-Id: I3fd7056cf963676009834fcbcf9c4a0922ca4a8f
Additionally, this PR changes NewNodeFraction devDefault and testplanet config from 0.05 to 1.
This is because many tests relied on selecting nodes that were reputable based on audit and uptime
counts of 0, in effect, selecting new nodes as reputable ones.
However, since reputation is now indicated by a vetted_at db field that is explicitly set
rather than implied by audit and uptime counts, it would be more complicated to try to
update all of the nodes' reputations before selecting nodes for tests.
Now we just allow all test nodes to be new if needed.
Change-Id: Ib9531be77408662315b948fd029cee925ed2ca1d
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.
Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
* The audit worker wants to get items from the queue and process them.
* The audit chore wants to create new queues and swap them in when the
old queue has been processed.
This change adds a "Queues" struct which handles the concurrency
issues around the worker fetching a queue and the chore swapping a new
queue in. It simplifies the logic of the "Queue" struct to its bare
bones, so that it behaves like a normal queue with no need to understand
the details of swapping and worker/chore interactions.
Change-Id: Ic3689ede97a528e7590e98338cedddfa51794e1b
To prevent longlived unused connections, set the maximum time to 30 minutes to
prevent proxies and loadbalancers forcefully cutting the connection.
This helps in scenarios with low load/requests to a DB.
Change-Id: I7dba15ef97f6f6541e872a6fb1d3a9bbbfe5bb50
TestMaxOutBuckets is one of our slower tests (50-90s).
This change seems to make it 2-12s.
It reduces the number of buckets that need to be created.
It also removes unnecessary storage nodes.
Change-Id: I1012fc6e9258b2f7674b16da4e8b418741c93eea
This change accomplishes multiple things:
1. Instead of having a max in flight time, which means
we effectively have a minimum bandwidth for uploads
and downloads, we keep track of what windows have
active requests happening in them.
2. We don't double check when we save the order to see if it
is too old: by then, it's too late. A malicious uplink
could just submit orders outside of the grace window and
receive all the data, but the node would just not commit
it, so the uplink gets free traffic. Because the endpoints
also check for the order being too old, this would be a
very tight race that depends on knowledge of the node system
clock, but best to not have the race exist. Instead, we piggy
back off of the in flight tracking and do the check when
we start to handle the order, and commit at the end.
3. Change the functions that send orders and list unsent
orders to accept a time at which that operation is
happening. This way, in tests, we can pretend we're
listing or sending far into the future after the windows
are available to send, rather than exposing test functions
to modify internal state about the grace period to get
the desired effect. This brings tests closer to actual
usage in production.
4. Change the calculation for if an order is allowed to be
enqueued due to the grace period to just look at the
order creation time, rather than some computation involving
the window it will be in. In this way, you can easily
answer the question of "will this order be accepted?" by
asking "is it older than X?" where X is the grace period.
5. Increases the frequency we check to send up orders to once
every 5 minutes instead of once every hour because we already
have hour-long buffering due to the windows. This decreases
the maximum latency that an order will be reported back to
the satellite by 55 minutes.
Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
On run, write the storage directory verification file.
Every time the node runs it will write the file even if it already exists.
The reason we do this is because if the verification file is missing, the SN
doesn't know whether it is an incorrect directory, or it simply hasn't written
the file yet, and we want to keep nodes running without needing operator intervention.
Once this change has been a part of the minimum version for several releases,
we will move the file creation from the run command to the setup
command. Run will only verify its existence.
Change-Id: Ib7d20e78e711c63817db0ab3036a50af0e8f49cb
Sometimes SNOs fail to properly configure or lose connection to their storage directory
which can result in DQ. This causes unnecessary repair and is unfortunate for all parties.
This change introduces the creation of a special file in the storage directory at runtime
containing the node ID. While the storage node runs, it periodically verifies that it can
find said file with the correct contents in the correct location. If not, the node will
shut down with an error message.
This change will solve the issue of nodes losing access to the storage directory, but it will not
solve the issue of nodes pointing to the wrong directory, as the identifying file is created each
time the node starts up. After this change has been the minimum version for a few releases, we will
remove the creation of the directory-identifying file from the storage node run command and add it
to the setup command.
Change-Id: Ib7b10e96ac07373219835e39239e93957e7667a4
services
This PR adds a limiter on the amount of concurrent objects deletion can be handled so
we don't run out of memory.
Change-Id: Id2ce368af6f86845fcdfd34cb2f5e460efe9b272
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.
The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.
Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
In testplanet Run function we create a new configuration variable on
each t.Run for setting the value to the config name field when it's
empty, however the new copy of the configuration was not used.
Change-Id: I9da34e743f9648850c96556eab0349e742db3aac
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.
Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.
In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).
In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.
In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.
The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.
Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.
Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
Add a config so that some percent of users require credit cards /
account balances
in order to create a project or have a promotional coupon applied
UI was updated to match needed paywall status
At this point we decided not to use a field to store if a user is in an
A/B
test, and instead just use math to see if they're in a test. We decided
to use MD5 (because its in Postgres too) and User UUID for that math.
Change-Id: I0fcd80707dc29afc668632d078e1b5a7a24f3bb3
Removes old project_bandwidth_rollups records that are no longer used.
Uses a retain months configuration to determine how many months to save. Current month cannot be removed.
Tests retainMonths=-1, 0, 2
Change-Id: Ia4be2546cdb28802427acf41ecd85ad66df3e62c
The order in which column names appear in an index should be
deterministic (for both our sqlite and postgresql code). Also, the order
is very relevant as to whether a given schema is correct.
Change-Id: I227ea057fcd9c3e967dd241a7e1c787d1bc4baa1
This change switches the backend logic to use the new DB column on the users table to restrict project creation.
Furthermore it back fills the existing limits from registration tokens to the new column to ensure no users are reset to the new default.
UI is updated to reflect ability to create several projects
Change-Id: Ie29157430ae6b065411ca4c4557c9f1be69cdc4f
We passed in revocationDB and metainfoDB for no reason.
Lets remove it from the dependency list to further reduce the footprint.
Change-Id: Ic0317bb92670fbd305d4a8b0ed1cb82858e2f6d3
Why: We need a way to cut down on database traffic due to bandwidth
measurement and tracking.
What: This changeset is the Satellite side of settling orders in 1 hr windows.
See design doc for more details: https://review.dev.storj.io/c/storj/storj/+/1732
Change-Id: I2e1c151e2e65516ebe1b7f47b7c5f83a3a220b31
What:
Use the github.com/jackc/pgx postgresql driver in place of
github.com/lib/pq.
Why:
github.com/lib/pq has some problems with error handling and context
cancellations (i.e. it might even issue queries or DML statements more
than once! see https://github.com/lib/pq/issues/939). The
github.com/jackx/pgx library appears not to have these problems, and
also appears to be better engineered and implemented (in particular, it
doesn't use "exceptions by panic"). It should also give us some
performance improvements in some cases, and even more so if we can use
it directly instead of going through the database/sql layer.
Change-Id: Ia696d220f340a097dee9550a312d37de14ed2044
STORJ_POSTGRES_TEST naming was not consistent with STORJ_SIM_POSTGRES.
This allows to use STORJ_TEST_POSTGRES for clarity, it still has a
fallback to STORJ_POSTGRES_TEST.
Change-Id: I6f294c66c80fcfd6750fea2a89795f3b7f5dd691
Since we increased the number of concurrent audit workers to two, there are going
to be instances of a single node being audited simultaneously for different segments.
If the node times out for both, we will try to write them both to the pending audits
table, and the second will return an error since the path is not the same as what
already exists. Since with concurrent workers this is expected, we will log the
occurrence rather than return an error.
Since the release default audit concurrency is 2, update testplanet default to run with
concurrent workers as well.
Change-Id: I4e657693fa3e825713a219af3835ae287bb062cb
Use a field to distinguish migration steps that need to use a
different transaction from previous steps. This is clearer than
using a func.
Change-Id: I2147369d05413f3e8ddb50c71a46ab1ba3ab5114
This ensures that rows are closed to avoid leaks.
Also verifies that Err() is called, to ensure that no
error is left behind.
Change-Id: Idd1bec9bf479f40021da67b2c80ce83033149469
what would win? thousands of man-hours spent trying to make
the best, most bug-free code possible, or one leaky boi?
this way we hopefully reduce the number of times we deadlock
everything by forgetting a single rows.Close.
Change-Id: I191727bbb75f74f5f4d0664e9e7b6ccf46c931f5
