In the migration to migrate the corresponding name of the partner id to
user agent, part of the requirement was to migrate the partner id
itself if there was no partner name associated. This turned out to not
be so good. When we parse the user_agent column later, it is returning an
error if the user agent is one of these UUIDs.
Change-Id: I776ea458b82e1f99345005e5ba73d92264297bec
We are switching from alpine to debian due to a network issue
introduced in alpine 3.13+ which fails to verify certificates
due to not all armhf boards meet the time64 requirement:
https://wiki.alpinelinux.org/wiki/Release_Notes_for_Alpine_3.13.0\#time64_requirements
Also, Debian does not have official imagess for arm32v6 architecture
so we are building with arm32v5 arch in the Makefile.
Change-Id: I3660c3f64b7c2b342dd4ccb876af5f4e3036ea9d
When there is an error fetching a piece, the reader might be present or
it might not, depending on how far the fetch operation got. The
fetch-pieces code did not handle the "reader-not-present" case. Now it
should.
Change-Id: I263657d544d0ab8ba5d307a34ffc76bbf56835d0
Updating the version of the base image for the storagenode docker image.
Also fixes the non-root permission issue to /app directory
Change-Id: I8b55a1e3062f55ce6fc52e126ec1a18bfa24e669
This change fixes the following issues:
wget: Alpine docker image by default uses the builtin BusyBox wget which is not capable of handling SSL traffic via proxy unlike the GNU wget. We have to replace BusyBox wget with GNU wget.
updater failing to restart the node: supervisorctl pointing to wrong config file. We remove the default configuration file and point supervisorctl to custom config in systemctl
updates https://github.com/storj/storj/issues/4489
Change-Id: I24a7f18377ba723bbc377bb5d25aaa14f37021b1
Add ability to limit updates in migrations.
To make sure things are looking okay in the migration, we can run it
with a limit of something like 10 or 30. We can look at the output of
the migrated columns to see if they are correct. This should have no
effect on subsequently running the full migration.
Change-Id: I2c74879c8909c7938f994e1bd972d19325bc01f0
This change fixes the `sed: can't create temp file '/etc/supervisor/supervisord.confXXXXXX': Permission denied` issue when editing the supervisord.conf file during runtime as a non-root user.
While editing the config file, Sed creates a temporary file, saves the result and then finally mv the original file with the temporary one. So we need to set the permission for the /etc/supervisor where the temporary file is created.
Change-Id: Ic9c147a9cf0a6ef94adf702e33054edce1828806
The supervisord.conf file is edited to set the args for the storagenode and storagenode-updater binaries at runtime. This change moves the config file to the base image so we can set the permission to allow non-root users edit the config file.
Non-root user permission is also needed for the /app directory so we can install/update the binaries when run as a non-root user.
Updates https://github.com/storj/storj/issues/4489
Change-Id: If7a51a00ea171253e41923501174a43393f4638c
When copying an object from cli you can now set the expiry.
It uses the same datetime format as restricting access grants.
Closes https://github.com/storj/storj/issues/4595
Change-Id: Icab73a64a9589817d6bc6d702b765b166ca1350d
Having the storagenode and storagenode-updater processes in one container
requires a process manager to properly handle the individual processes.
Using a process manager like supervisord requires that you package
supervisord and it configuration in the image, along with the storagenode
and storagenode-updater binaries.
Installing supervisord requires that we run apk to install it and its
dependencies at build time which makes it difficult to build multi-platoform
images; executing apk forces a requirement of the build system to run
foreign architechtures.
This change adds a dockerfile which will be used to build the base image
for the storagenode and has supervisord packaged. The base image will be
built manually using docker buildx, with QEMU binfmt support.
Updates https://github.com/storj/storj/issues/4489
Change-Id: I33f8f01398a7207bca08d8a4a43f4ed56b6a2473
We would like to disable in production those parts of code
which are now mixed with new server-side copy logic.
Change-Id: Iff50682bc9545207330f58dd19b5eee53d404d7f
The text has been expanded a bit to clarify that it is necessary to create identity files with an example before using the Docker image.
Changed the <identity-dir> placeholder to <multinode-identity-dir> so no one confuses them with the storagenode identity files.
Changed the <storage-dir> placeholder to <multinode-config-dir> so no one confuses them with the storagenode 'config' folder.
fixed#4547
Closes#4547
We do not build an docker image for the multinode dashboard,
which makes monitoring for docker-focused environments harder.
This adds the basic image and ties it into CI/CD.
Change-Id: I14c01a7f1f0019f6f5c1b8fd75dc424fc362b18d
Currently the metainfo/metabase DB connections are missing the proper
application_name in order to differentiate and filter queries on the DB
side for analytics.
Without it, it is very time-consuming to correlate processes and their load.
This change adds the "check" on DB connection init and passes the fallbacks
in all places to catch connection strings, that do not set it.
Change-Id: Iea5cea8658bc63778ff89038e5c1c352bf482cfd
The "satellite fetch-pieces" command allows a satellite operator to
fetch as many pieces of a segment as possible, along with their
original order limits and hashes as provided by the storage nodes. The
fetched pieces and associated info will be stored on in a specified
folder as they are, rather than being RS-decoded or decrypted.
It is hoped that this will allow easier debugging of certain one-off
problems we've observed in the wild.
Change-Id: I42ae0e9ef0023538e42473a9be5a2460a3ac0f3a
some old configs had a value like
access: <data>
in the yaml. this would end up causing migration to
create a json file where it had no access values and
a default name of the data. that's not what the command
expects to operate on, so now we fix that during
migration and add a little mini migration for any
users that may have hit it.
Change-Id: I4c98ca5d09d043fe9338738ef6b4f930f933892c
In addition to upgrading the storj.io/common library, this change
moves off the TCPConnector in favor of the HybridConnector per
the deprecation warning.
Change-Id: I7e7e1e7568e8b95e4a99ad9caa158a799e68e1e3
Change the implementation of register and share so that it uses the
uplink method to contact the Auth Service. The network protocol switches
from HTTP to DRPC.
Closes https://github.com/storj/storj/issues/4324
Change-Id: Ib8fdb1665c6385bb39a546ba46a8df43a136df9c
Through `docker run storjlabs/storagenode:latest --help` we have always
made available around 100 command-line arguments.
However if you now pass such an argument it will be passed to
storagenode-update and it may no longer be recognized. This will cause
the storagenode not to start.
This was introduced in
https://review.dev.storj.io/c/storj/storj/+/5426
This change restores previous functionality.
Change-Id: I06823283ff82ffda12aee48c4d83717bddfbfdac
Change the order of when the storage node setup node loads the identity
for avoiding to write anything in the disk in the case that there is an
error loading the identity.
This bug was reported by @onionjake Github username's and the specific
changes to make.
Closes#4387#4396
Change-Id: I360fff3c23b160c9e055203d3526d749edfd9129
Get storagenode and storagenode-updater binaries during
run of the container to not to release new docker image
on each new version of the storagenode binary.
Fixes https://github.com/storj/storj/issues/4176
Change-Id: I994c4942136a2cc7298eb0346238689eb406ae5b
Use satellite.DB method TestingMigrateToLatest instead of
MigrateToLatest. TestingMigrateToLatest is much faster.
Also, run package tests in parallel.
Change-Id: I18bc0926dcfb80ace30d0b401e64ed919bfb966f
Value attribution codes were converted into UUIDs and stored
in the users, projects, api_keys, bucket_metainfos, and
value_attributions tables in the partner_id column. This
migration will lookup the appropriate partner name associated
with each of these UUIDs, and store the partner name directly
in the user_agent column within each table. If no corresponding
partner name exists for a partner_id, the partner_id value will
be stored instead.
Add migration for users table with tests.
Change-Id: I61254d9b81c474e76bcfc1c8cd863697c6ef44b6
Users signing up through a url containing a promo code will have that code applied to their stripe account instead of the free tier coupon.
Change-Id: I071041b0934648ef3f5bdb05b6ec97c400f89ae4
Currently the address being used is most of the time just :28967, which is not the correct address to reach the node from the public on.
This change uses the designated contact external address value that contains the set and preferred way to reach the node.
Change-Id: I99e979c2541043755b81e65c36c4289bfa3f60f3
