For coordinating with other processes it can be useful to wait until
another process is accepting requests on an address.
Change-Id: Id623ed815149f14f9f0344e2f396ab70fc4dec6a
If the satellite fails to pingback the storage node during CheckIn
an error message is returned to the node in the response, but the actual
error value returned is nil. We are only checking the error. This means
the node has no feedback about the failure, and the node also does not
attempt to retry the connection.
Change-Id: Iaed00e422ba91af573e72255cc6671ea97928eae
This change fixes two things which can make reading from a corrupted
orders file inefficient.
* When a corrupted order is detected, but the underlying error is an
UnexpectedEOF (as opposed to a pb.Unmarshal error, for instance), there
is no point in attempting to read from the file another time to find an
additional uncorrupted order - we will continue to get UnexpectedEOF
errors until we seek to the very end of the file and get a normal EOF.
Instead, when UnexpectedEOF occurs, log and send metrics as with other
types of corruption, but do not attempt to read again.
* When a corrupted order is detected, instead of seeking forward only
one byte for the next attempt, seek forward by the size of entryHeader.
This cuts down on the number of iterations needed to find an uncorrupted
order after detecting a corrupted one.
Change-Id: Ie1a613127e29d29318584ec7f60e8f7554f73487
Currently our code is only using github version of the code, so there
shouldn't be need for the exception.
Change-Id: I0c6e8a8465ab7b525d4b5d1b29e4e5298384286d
It turns out we need to make 2 more changes in order for the new order submission phase 3 to get deployed.
This PR makes 2 changes:
1) when the rollup service deletes tallies, we now keep tallies around until orders expire (vs 1 day like before).
2) the reported rollup chore will now write the storagenode_bandwidth_rollups to a new table _phase2 as an intermediary step so it doesn't conflict with phase 3 order settlement.
These changes need to be deployed for 2 days before we can turn on phase 3 of the new orders settlement workflow.
Change-Id: Iafbff577ba7d55f8f17b7db857311b2ce799de60
Cockroach 20.2 started automatically profiling, this is a workaround to
disable it and ensure it doesn't create any folders and files in the
repository.
Change-Id: Ib65de01ea1fc619160d710c01602ced3a3a3492e
This PR does follwing changes:
1. Change oldest uplink version in the test to v0.35.3
When the test is first created, we decided to support uplink
version starting from v0.17.1, however with many API changes,
older uplinks are not usable with latest version of the network
anymore. One of the reasons being older uplinks uses deprecated
endpoint. Therefore, we will change the oldest uplink version to
the one that's using only new endpoints.
2. Disable tls certificate verification in uplink
3. Use storj-sim version control server instead of production one
4. Skip uplink version v1.3.x due to bug in that release
Change-Id: I926a6bb9829cb7181ee752437cdcb67e59197fe0
Previously, we created a new file to use for directory verification
every time the storage node starts. This is not helpful if the storage node
points to the wrong directory when restarting. Now we will only create the file
on setup. Now the file should be created only once and will be verified at
runtime.
Change-Id: Id529f681469138d368e5ea3c63159befe62b1a5b
WHAT:
web worker for compiling and instantiation of web assembly module
WHY:
Currently webassembly requires unsafe-eval, however we don't want to
add it to main site due to CSP. The workaround for this is to instantiate
wasm code inside a web worker.
Change-Id: I0c3c9cafa3a0c344761cf6dd86bf96248f1103ca
Previously, we ran setup if no config file was found in the expected dir.
However, there may be situations where a previously set up node's files
may be unreachable. In this case, we would prefer to exit with an error
rather than assume this node needs to be initialized.
The solution here is to add a new env variable to call the setup command.
If SETUP == true, the node will setup, but not run. If SETUP != true,
the node will run and not setup.
If a previously set up node runs with SETUP, it will return an error.
If a node runs without an initial SETUP, it will return an error.
Change-Id: Id2c796ec3d43f2add5e5f34fb777a563eae59f2f
The current monkit reporting for "remote_segments_lost" is not usable for
triggering alerts, as it has reported no data. To allow alerting, two new
metrics "checker_segments_below_min_req" and "repairer_segments_below_min_req"
will increment by zero on each segment unless it is below the minimum
required piece count. The two metrics report what is found by the checker
and the repairer respectively.
Change-Id: I98a68bb189eaf68a833d25cf5db9e68df535b9d7
Currently when there's a timeout or panic, the culprit goroutines might
not be printed. Set traceback to all, which prints all user created
goroutines.
Change-Id: I29f87812d2a60f671b3eb172499e24cf70d990b5
This change forward-proofs the satellite selection on uplink setup.
Currently we have hard-coded response values, so if we add satellites in
the future we have to remember to update the switch statement below. In
this change it should work for any number of future satellites.
Change-Id: I3250fe2154dbeb4820efadf49780b20c4b7a3408
This PR fixes below issues:
1. remove concurrent installation for various versions
We were doing this to decrease the amount of execution time the versions test.
However, it's returning incorrect exit code when there's an
installation failure.
Right now, we are only installing two versions of `storj-sim` and
the rest are only doing uplink cli installation. The performance of
this test should be hugely impacted by the setup step now.
2. only remove release settings instead of deleting the entire file
uplink CLI is referrencing `private/version` package. Therefore, we
cannot delete it
3. add back `GATEWAY_0_API_KEY` in storj-sim
In order to set up older version of uplink cli, we need access to
the gate way api key.
Change-Id: Ia3c37c197bd007b6e1f7c2bd71adde42181d46f0
This PR does the following three things:
1. Defines a high-level interface for this wasm package
- All return value from this package will be wrapped with an
result object that contains a value field and an error field
2. Exposes two new functions to allow users to add permissions for a
given API key
- newPermission()
- setAPIKeyPermission()
3. Adds API documentation for the newly added API functions
Change-Id: Id995189702b369bba18fa344bef4ddfb0f3f1f44
We shouldn't have any EOF issues with recent drpc fix, let's reenable
and see whether it's still flaky.
Change-Id: I0de312bcb087c7f70ec9d3281d73d86f971845d5
Make metainfo.RSConfig a valid pflag config value. This allows us to
configure the RSConfig as a string like k/m/o/n-shareSize, which makes
having multiple supported RS schemes easier in the future.
RS-related config values that are no longer needed have been removed
(MinTotalThreshold, MaxTotalThreshold, MaxBufferMem, Verify).
Change-Id: I0178ae467dcf4375c504e7202f31443d627c15e1
A change was made to use a metabase.SegmentKey (a byte slice alias)
as the last seen item to iterate through the irreparable DB in a
for loop. However, this SegmentKey was not initialized, thus it was
nil. This caused the DB query to return nothing, and healthy segments
could not be cleaned out of the irreparable DB.
Change-Id: Idb30d6fef6113a30a27158d548f62c7443e65a81
WHAT:
notifications store, api, types refactoring;
service creation;
notifications module store tests creation;
WHY:
to separate domain and app types;
to be able to reuse code more easier;
Change-Id: I01c6584fc41bbf73e0b6f84501cc66bbebd50ace
Currently we were picking databases randomly for testing,
however a round-robin picking might have more predictable
behavior and cause less cockroach timeouts.
Change-Id: I74ac0d5b38c89452d3c46d3811330e46e7449514
WHAT:
change user's email endpoint and appropriate service method was implemented
WHY:
make it possible to change user's email for temporary filezilla account
Change-Id: Ieea41bf49819a42b5f433e8dfaeec24c6d5ddc9f
