This change ensures that files generated by building the Vuetify
project are copied to the satellite container.
References #6251
Change-Id: If56fe754d51f1487a3b3c2cf98c40e3010539121
Currently, graceful exit is a complicated subsystem that keeps a queue
of all pieces expected to be on a node, and asks the node to transfer
those pieces to other nodes one by one. The complexity of the system
has, unfortunately, led to numerous bugs and unexpected behaviors.
We have decided to remove this entire subsystem and restructure graceful
exit as follows:
* Nodes will signal their intent to exit gracefully
* The satellite will not send any new pieces to gracefully exiting nodes
* Pieces on gracefully exiting nodes will be considered by the repair
subsystem as "retrievable but unhealthy". They will be repaired off of
the exiting node as needed.
* After one month (with an appropriately high online score), the node
will be considered exited, and held amounts for the node will be
released. The repair worker will continue to fetch pieces from the
node as long as the node stays online.
* If, at the end of the month, a node's online score is below a certain
threshold, its graceful exit will fail.
Refs: https://github.com/storj/storj/issues/6042
Change-Id: I52d4e07a4198e9cb2adf5e6cee2cb64d6f9f426b
The repair checker and repair worker both need to determine which pieces
are healthy, which are retrievable, and which should be replaced, but
they have been doing it in different ways in different code, which has
been the cause of bugs. The same term could have very similar but subtly
different meanings between the two, causing much confusion.
With this change, the piece- and node-classification logic is
consolidated into one place within the satellite/repair package, so that
both subsystems can use it. This ought to make decision-making code more
concise and more readable.
The consolidated classification logic has been expanded to create more
sets, so that the decision-making code does not need to do as much
precalculation. It should now be clearer in comments and code that a
piece can belong to multiple sets arbitrarily (except where the
definition of the sets makes this logically impossible), and what the
precise meaning of each set is. These sets include Missing, Suspended,
Clumped, OutOfPlacement, InExcludedCountry, ForcingRepair,
UnhealthyRetrievable, Unhealthy, Retrievable, and Healthy.
Some other side effects of this change:
* CreatePutRepairOrderLimits no longer needs to special-case excluded
countries; it can just create as many order limits as requested (by
way of len(newNodes)).
* The repair checker will now queue a segment for repair when there are
any pieces out of placement. The code calls this "forcing a repair".
* The checker.ReliabilityCache is now accessed by way of a GetNodes()
function similar to the one on the overlay. The classification methods
like MissingPieces(), OutOfPlacementPieces(), and
PiecesNodesLastNetsInOrder() are removed in favor of the
classification logic in satellite/repair/classification.go. This
means the reliability cache no longer needs access to the placement
rules or excluded countries list.
Change-Id: I105109fb94ee126952f07d747c6e11131164fadb
When we do `satellite run api --placement '...'`, the placement rules are not parsed well.
The problem is based on `viper.AllSettings()`, and the main logic is sg. like this (from a new unit test):
```
r := ConfigurablePlacementRule{}
err := r.Set(p)
require.NoError(t, err)
serialized := r.String()
r2 := ConfigurablePlacementRule{}
err = r2.Set(serialized)
require.NoError(t, err)
require.Equal(t, p, r2.String())
```
All settings evaluates the placement rules in `ConfigurablePlacementRules` and stores the string representation.
The problem is that we don't have proper `String()` implementation (it prints out the structs instead of the original definition.
There are two main solutions for this problem:
1. We can fix the `String()`. When we parse a placement rule, the `String()` method should print out the original definition
2. We can switch to use pure string as configuration parameter, and parse the rules only when required.
I feel that 1 is error prone, we can do it (and in this patch I added a lot of `String()` implementations, but it's hard to be sure that our `String()` logic is inline with the parsing logic.
Therefore I decided to make the configuration value of the placements a string (or a wrapper around string).
That's the main reason why this patch seems to be big, as I updated all the usages.
But the main part is in beginning of the `placement.go` (configuration parsing is not a pflag.Value implementation any more, but a separated step).
And `filter.go`, (a few more String implementation for filters.
https://github.com/storj/storj/issues/6248
Change-Id: I47c762d3514342b76a2e85683b1c891502a0756a
This change creates the ability to run a server separate from the
console web server to serve the front end app. You can run it with
`satellite run ui`. Since there are now potentially two servers instead
of one, the UI server has the option to act as a reverse proxy to the
api server for local development by setting `--console.address` to the
console backend address and `--console.backend-reverse-proxy` to the
console backend's http url. Also, a feature flag has been implemented
on the api server to retain the ability to serve the front end app. It
is toggled with `--console.frontend-enable`.
github issue: https://github.com/storj/storj/issues/5843
Change-Id: I0d30451a20636e3184110dbe28c8a2a8a9505804
placement.AllowedCountry is the old way to specify placement, with the new approach we can use a more generic (dynamic method), which can check full node information instead of just the country code.
The 90% of this patch is just search and replace:
* we need to use NodeFilters instead of placement.AllowedCountry
* which means, we need an initialized PlacementRules available everywhere
* which means we need to configure the placement rules
The remaining 10% is the placement.go, where we introduced a new type of configuration (lightweight expression language) to define any kind of placement without code change.
Change-Id: Ie644b0b1840871b0e6bbcf80c6b50a947503d7df
All the files in uploadselection are (in fact) related to generic node selection, and used not only for upload,
but for download, repair, etc...
Change-Id: Ie4098318a6f8f0bbf672d432761e87047d3762ab
We use two different Node types in `overlay` and `uploadnodeselection` and converting back and forth.
Using the same object would allow us to use a unified node selection interface everywhere.
Change-Id: Ie71e29d60184ee0e5b4547eb54325f09c418f73c
This patch makes satellite container images compatible with storj-up.
Which means that any official release can be easily tested locally.
It means that we need some binaries (like storj-up, dlv) and shall fragments part of the production image, but I think the risk is very low and the benefit is very high.
This is the first towards to unify all the images and make it possible to test/run the same components everywhere (storj-up/nigttly/prod).
https://github.com/storj/storj/issues/5946
Change-Id: Ib53b6213d94f93a793a841dedfe32cc59ef69b72
This change makes dial timeout configurable and change it also from
defatul 20s to 5s. Main motivation is that during repair we often loose
lots of time to dial which eventually will fail. New timeout should be
still enough to dial but we will move forward quicker to next node if
that one will fail.
Timeout is also applied directly as context timeout in case we will
use noise of tcp fast open one day.
Change-Id: I021bf459af49b11241e314fa1a7887c81d5214ea
the inspector tool of satellite is removed recently. We need to remove it from the build/docker files.
Change-Id: Icd75474ea64fe5f9dd4ed76d8597982108f93536
During billing, before invoice creation, check if users are part of a
package plan. If so, and if the package plan is expired, remove unused
credit from the user's balance. If the user has credit in addition to
the package credit, send an analytics event to notify someone to handle
the credit removal manually.
Change-Id: Iad71d791f67c9733f9d9e42f962c64b2780264cc
Add a new billing command that will convert stripe customer balances into invoice items so that the charges can be processed normally by the invoicing workflow.
Change-Id: Iaa8350e7aca80a0f14e94eb8ef8b7d6ce0b5b3b8
We avoid putting more than one piece of a segment on the same /24
network (or /64 for ipv6). However, it is possible for multiple pieces
of the same segment to move to the same network over time. Nodes can
change addresses, or segments could be uploaded with dev settings, etc.
We will call such pieces "clumped", as they are clumped into the same
net, and are much more likely to be lost or preserved together.
This change teaches the repair checker to recognize segments which have
clumped pieces, and put them in the repair queue. It also teaches the
repair worker to repair such segments (treating clumped pieces as
"retrievable but unhealthy"; i.e., they will be replaced on new nodes if
possible).
Refs: https://github.com/storj/storj/issues/5391
Change-Id: Iaa9e339fee8f80f4ad39895438e9f18606338908
We have lots of direct DB requests to get API keys. It should be handled
by cache but default value is very low at the moment.
Fixes https://github.com/storj/storj/issues/5665
Change-Id: I214ebebd6e397cacff80b2f36dc4a2eea388f93d
This test involves a satellite with dev defaults (DistinctIP=no) being
upgraded past commit 2522ff09b6, which
means we need to run the dev-defaults-satellite-upgrade migration SQL
to avoid getting DistinctIP=yes behavior (which breaks the tests).
Change-Id: I29fb596d1ffa568dad635d98cfe9abacd3aaa48f
Only API peer needs access to order DB (and rollups cache) because it's
only place where we are creating orders for PUT and GET operations. For
other peers like auditor and repairer we can set noop implementation to
reduce number of dependencies needed for them.
Change-Id: Ic32d1879f0b97ffc4516f401898e31e95ae892e4
It was surprising that `satellite auditor` complained about SMTP mail settings, even if it's not supposed to sending any mail.
Looks like we can remove the mail service dependency, as it's not a hard requirement for overlay.Service.
Change-Id: I29a52eeff3f967ddb2d74a09458dc0ee2f051bd7
The tests were using global variables for keeping the mock state, which
was indexed by the satellite ID. However, the satellite ID-s are
deterministic and it's possible for two tests end up using the same
mocks.
Instead make the mock creation not depend on the satellite ID and
instead require it being configured via paymentsconfig.
This fixes TestAutoFreezeChore failure.
Change-Id: I531d3550a934fbb36cff2973be96fd43b7edc44a
This code is essentially replacement for eestream.CalcPieceSize. To call
eestream.CalcPieceSize we need eestream.RedundancyStrategy which is not
trivial to get as it requires infectious.FEC. For example infectious.FEC
creation is visible on GE loop observer CPU profile because we were
doing this for each segment in DB.
New method was added to storj.Redundancy and here we are just wiring it
with metabase Segment.
BenchmarkSegmentPieceSize
BenchmarkSegmentPieceSize/eestream.CalcPieceSize
BenchmarkSegmentPieceSize/eestream.CalcPieceSize-8 5822 189189 ns/op 9776 B/op 8 allocs/op
BenchmarkSegmentPieceSize/segment.PieceSize
BenchmarkSegmentPieceSize/segment.PieceSize-8 94721329 11.49 ns/op 0 B/op 0 allocs/op
Change-Id: I5a8b4237aedd1424c54ed0af448061a236b00295
Peer for generating bloom filters will be able to use ranged loop.
As an addition some cleanup were made:
* remove unused parts of GC BF peer (identity, version control)
* added missing Close method for ranged loop service
* some additional tests added
https://github.com/storj/storj/issues/5545
Change-Id: I9a3d85f5fffd2ebc7f2bf7ed024220117ab2be29
Previously we were exposing the testing facilities via interface casting
the necessary parts, however, when things are not part of the main
satellite.DB interface they need to be manually propagated. Rather than
relying on using hidden methods lets expose things as long as they don't
create a direct dependency to the database driver.
Change-Id: I2eb7d8b60f4b64de1320c2d32581f7be267c0f57
Users with a partner package plan should be unable to replace their
plan's coupon. This change enforces this behavior by rejecting coupon
application attempts from users that meet this criteria.
Change-Id: I6383d19f2c7fbd9e1a2826473b2f867ea8a8ea3e
This change causes the bucket's partner info to be used rather than the
user's when calculating project usage prices. This ensures that users
who own differently-partnered buckets will be charged correctly for
usage based on the specific bucket they are utilizing.
according to the bucket's partner.
Related to storj/storj-private#90
Change-Id: Ieeedfcc5451e254216918dcc9f096758be6a8961
This change allows for overriding project usage prices for a specific
partner so that users who sign up with that partner do not need their
invoices to be manually adjusted.
Relates to storj/storj-private#90
Change-Id: Ia54a9cc7c2f8064922bbb15861f974e5dea82d5a
* use the same DB application name for satellite and metabase
* use noop orders DB implementation to avoid storing allocated bandwidth
in DB
Change-Id: I20e88c694d38240fe1a20c45719e210cfb76402c
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
Now that we are doing scalable piecewise reverifications, the code for
handling the old way of doing things (containment, pending audits,
reporting, testing) can now be removed.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ief1a75f423eff682e8f3d57804e343b3409a6631
NewContainment will replace Containment later in this commit chain, but
for now it is not yet being used.
NewContainment will allow a node to be contained for multiple pending
reverify jobs at a time. It is implemented by way of the reverify queue.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I126eda0b3dfc4710a88fe4a5f41780618ec19101
Reputation updates during repair currently consumes a lot of database
resources. Sometimes increasing the rate of repair is more important
than auditing a node based on whether they have or don't have the
correct piece during repair. This is the job of the audit service.
This commit is to implement an intermediate solution from this issue: https://github.com/storj/storj/issues/5089
This commit does not address the more in-depth fix discussed here: https://github.com/storj/storj/issues/4939
Change-Id: I4163b18d78a96fadf5265789fd73c8aa8def0e9f
If we are processing list of segments (csv) we should not stop if one of
segments is not found in DB.
Change-Id: I720f85dc7601c2ca77032e20c1577de55092bd9b
Current option is to put stream id and position as an input but
it's not very efficient when we have long list of segments to repair.
This change adds option to read whole csv file and process each entry
one by one.
If command will have single argument then it will treat it as csv file
location and if will have two arguments then it will parse it just as
stream id and position.
Change-Id: I1e91cf57a794d81d74af0091c24a2e7d00d1fab9
Implements logic for satellite command to repair a single segment.
Segment will be repaired even if it's healthy. This is not checked
during this process. As a part of repair command will download whole
segment into memory and will try to reupload segment to number of new
nodes that equal to existing number of pieces. After successful
upload new pieces will completely replace existing pieces.
Command:
satellite repair-segment <streamid> <position>
https://github.com/storj/storj/issues/5254
Change-Id: I8e329718ecf8e457dbee3434e1c68951699007d9
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
New flag 'MultipleVersions' was not correctly passed from metainfo
configuration to metabase configuration. Because configuration was
set correctly for unit tests we didn't catch it and issue was found
while testing on QA satellite.
This change reduce number of places where new metabase flags needs
to be propagated from metainfo configuration to avoid problems with
setting new flags in the future.
Fixes https://github.com/storj/storj/issues/5274
Change-Id: I74bc122649febefd87f665be2fba628f6bfd9044
