Slightly modified the warning message on the "Add STORJ Tokens" modal;
And added a warning for zkSync.
Issue: https://github.com/storj/storj/issues/5418
Change-Id: I206e7b493c3fe04c69a3815a5f03bd6a07cfceae
Wire up duration measurement of observers with monkit.
Tested by attaching a SleepObserver, starting the rangedloop in storj-up
and navigating to http://<container>:11111/mon/stats. It reports the
following statistic:
completed-observer-duration,observer=*rangedlooptest.SleepObserver,scope=storj.io/storj/satellite/metabase/rangedloop duration=10.000117
Change-Id: Ief131d34001dd5d3ba1d7be6f161986e1f66440d
Before we introduced objects versions internally move operation was
always failing when under target location object exists. But then we
had only single version 1 all the time. With versions different than 1
we need to check all existing objects under target location.
To be backward compatible with our API new logic looks like this:
* if there is no object under target location use source object version
as target version
* if there are only pending objects find first free (highest) version
which could be used to move object there
* if there is committed object under target location reject move
operation
Fixes https://github.com/storj/storj/issues/5403
Change-Id: I717f3e7c42470b406287d6ec335f6f057d3fc3b5
Because it was originally intended to work on only a few pieces from
each segment at a time, and would frequently have reset its list of
online nodes, segment-verify has been taking nodes out of its
onlineNodes set and never putting them back. This means that over a long
run in Check=0 mode, we end up treating more and more nodes as offline,
permanently. This trend obfuscates the number of missing pieces that
each segment really has, because we don't check pieces on offline nodes.
This commit changes the onlineNodes set to an "offlineNodes" set, with
an expiration time on the offline-ness quality. So nodes are added to
the offlineNodes set when we see they are offline, and then we only
treat them as offline for the next 30 minutes (configurable). After that
point, we will try connecting to them again.
Change-Id: I14f0332de25cdc6ef655f923739bcb4df71e079e
This change implements the ranged loop observer to replace the audit
chore that builds the audit queue.
The strategy employed by this change is to use a collector for each
segment range to build separate per-node segment reservoirs that are
then merge them during the join step.
In previous observer migrations, there were only a handful of tests so
the strategy was to duplicate them. In this package, there are dozens
of tests that utilize the chore. To reduce code churn and maintenance
burden until the chore is removed, this change introduces a helper that
runs tests under both the chore and observer, providing a pair of
functions that can be used to pause or run the queueing function.
https://github.com/storj/storj/issues/5232
Change-Id: I8bb4b4e55cf98b1aac9f26307e3a9a355cb3f506
This ensures that empty trash and restore trash cannot run at the same
time.
Fixes https://github.com/storj/storj/issues/5416
Change-Id: I9d2e3aa3d66e61e5c8a7427a95208bb96089792d
The WithExists methods previously were not writing problematic pieces to
problem-pieces.csv. With this change, they will.
Change-Id: I51eadd3d8f4299e1efa787c9266a7aacfa525eb3
When this branch is followed, `audit.OutcomeFailure` is returned, and
`MarkNotFound()` is immediately called again (in
`(*NodeVerifier).Verify()`). Calling `MarkNotFound()` twice for the same
piece is not correct.
Change-Id: I1a2764bc32ed015628fcd9353ac3307f269b4bbd
It may help to know how much faster these methods are than the
alternative (asking nodes for each piece in turn).
Change-Id: Ieb7c963f62b662f72c84a49de8a09c065c14f782
It was ok as it was, but since we want to keep a close eye on progress
while the tool is running, it will help to have results written to the
output file immediately instead of after the buffer is full or the
program exits.
Change-Id: Ie027f05771a637afb06969ec775cd32b142b7635
Add design for identifying and processing node events and sending
notifications to node operators.
github issue: https://github.com/storj/storj/issues/5039
Change-Id: I63341867207c28334bb025c6a104692ce2a16edd
This change is similar to
https://review.dev.storj.io/c/storj/storj/+/7687 but applied when
uploading from stdin with parallelism > 1.
Currently, the paralellism from stdin scales up to 3 or 4, but not
greater than that. If we buffer the content from stdin more aggressively
the parallelism scales to higher levels and reaches the performance of
reading directly from a file.
Change-Id: I1f447686a88074882709992ee6d52dd262e220fb
When Check == 0 (check all pieces), there is nearly always a piece left
in the retry count, so most segments get logged in segments-retry.csv.
This change makes it so we require retry>5 before adding to
segments-retry.csv (only in the check==0 case).
Change-Id: Iaea523c27eb777e3c248c27c7ef5effe77ae54cf
This new advanced flag configures libuplink to store in-memory the
erasure-coded pieces that are temporarily created during upload.
By default, libuplink writes the erasure-coded pieces as temp files on
the disk, but this results in additional IOPS that affect the
performance in hot-rodded scenarios.
If the erasure-coded pieces are kept in-memory and the system has enough
RAM, the upload speed may be boosted with 20-30%.
The flag is added as "advanced" as we don't recommend it by default.
Co-authored-by: Stefan Benten <mail@stefan-benten.de>
Change-Id: Icc54f03b6c0bc27c97126f6f1d22748d21a15959
add triggerAttemptPaymentIfFrozen to check if the account is frozen
and if frozen, will trigger an attempt to pay outstanding invoices
Issue: https://github.com/storj/storj/issues/5398
Change-Id: I0da6a982e2da4204dee219d98ce2d503cbbb6f8e
The tests are forked from the chore tests with slight adaptations for
being run against the ranged loop. I also moved a benchmark for the
database from chore_test.go to db_test.go.
The pathcollector is reused as a rangedloop.Partial.
https://github.com/storj/storj/issues/5234
Change-Id: I56182031d133812a9f4d4a433c01b9150af39f31
* better error handling when Exists method is not avaialble on SN
* more optimal processing of response from Exists method
Change-Id: I6d61c09473e9f5ab76a4601720e8bd520767f4c2
Track duration of all segment loop observers. Factor out functions to
reduce size.
Still need to send the measurements out via monkit.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
added api call, user isFrozen status;
new banner added;
DashboardArea migrated to use composition api;
Change-Id: Ia3fe68c2239064b2b729c6de14d7fc1dc8f4cf3b
This modifies the userinfo endpoint to return appropriate errors;
PermissionDenied for untrusted peers and Unimplemented because
the endpoint isn't implemented
Change-Id: I5109bb204b5e1ce2e21fe16b003991b6c900a8ce
Implemented interception for http requests.
We redirect user to login page on every 401 response.
Issue:
https://github.com/storj/storj/issues/5339
Change-Id: Icba4fc0031cb2b4e682a1be078cdcf95b7fa6bfe
This change stubs userinfo endpoint from storj/common/pb/userinfo.proto.
It also adds config for allowed peers, and a method for verifying peers.
Issue: https://github.com/storj/storj/issues/5358
Change-Id: I057a0e873a9e9b3b9ad0bba69305f0d708bd9b9e
Fixed bucket search not being cleared on component unmount.
Fixed open bucket issue for project dashboard presented by the conflict with vue-click-outside directive.
Change-Id: I3682c6b131dcdb902369cf74b31c1b270cd15b08
* normalize ExistsCheckWorkers flag to avoid setting incorrect values
* wait for limiter to finish if context was canceled
Change-Id: I688a395bd958cd09233605fc264d43f91ec45ed1
Adds new method Exists which can be used to verify which
requested piece ids exists on storage node. Will verify only pieces
which belongs to the satellite that used that endpoint.
Minum WASM size was increased a bit.
https://github.com/storj/storj/issues/5415
Change-Id: Ia5f9cadeb526541b2776a8973eb7d50133ad8636
This change adds an account freeze service with methods for checking
if a user is frozen, freezing a user, and unfreezing a user.
Furthermore, methods for altering the usage limits of a user or project
have been implemented for use by the account freeze service.
Change-Id: I77fecfac5c152f134bec90165acfe4f1dea957e7
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
This change updates the stripecoinpayments service to optionally skip
generating line items for payments records that have no egress, storage,
or segments for the billing period.
This results in a reduction from 4 to 1 Stripe API calls for customers
who have no usage. The final API call is the attempt to generate an
invoice on stripe, which expectedly fails because there are no unapplied line
items. Removing that final API call would require some additional
queries and is out of scope for this change.
This functionality is behind the
`payments.stripe-coin-payments.skip-empty-invoices` feature flag.
https://github.com/storj/storj/issues/5381
Change-Id: Id184969a4c79047c40502336d69c51388ab03bf8
Starting restore trash in the background allows the satellite to
continue to the next storagenode without needing to wait until
completion.
Of course, this means the satellite doesn't get feedback whether it
succeeds successfully or not. This means that the restore-trash needs to
be executed several times.
Change-Id: I62d43f6f2e4a07854f6d083a65badf897338083b
