For some reason minio sometimes validates versionID as UUID. Until
we decide what to do lets align our version format with it.
Change-Id: I6e9832d0adc1d3b6e3f46688b386e0e118219038
Protobuf definition is ready to support deleting specific version of
object so we just need to wire requested version into metainfo
BeginDeleteObject endpoint.
Dependencies bumped to get latest metainfo protobuf definition.
https://github.com/storj/storj/issues/6221
Change-Id: Ifc3cc0b49d9acdf4f7e57e7184b0f2ae045f9113
We are doing full bucket name validation for many requests but
we should do this only while creating bucket. Other requests will be
covered only by basic name length validation. Less strict validation for
other requests will make bucket usable in case of invalid bucket names
in DB (we have such cases from the past).
https://github.com/storj/storj/issues/6044
Change-Id: I3a41050e3637787f788705ef15b5dc4df4d01fc6
We would like to have ability to limit burst uploads to the single
object (the same location). This change we are limiting such upload to
one per second.
Change-Id: Ib9351df1017cbc07d7fc2f846c2dbdbfcd3a360c
Metainfo needs to know rate and burst limit to be able to limit users
requests. We made cache for per project limiter but to make single
instance we need to know about limits. So far we were doing direct DB
call to get rate/burst limit for project but it's generating lots of
DB requests and can be easily cached as we even have project limit cache.
This change extends project limit cache with rate/burst limit and starts
using this change while creating project limiter instance for metainfo.
Because data size kept in project limit cache is quite small this change
also bumps a bit default capacity of the cache.
Fixes https://github.com/storj/storj/issues/5663
Change-Id: Icb42ec1632bfa0c9f74857b559083dcbd054d071
Affected packages admin,attribution,console,metainfo,satellitedb,web,payments
This change removes the satellite/rewards package and its related usages.
It removes references to APIKeyInfo/PartnerID, Project/PartnerID
and User/PartnerID.
Issue: https://github.com/storj/storj/issues/5432
Change-Id: Ieaa352ee848db45e94f85556febdbcf1444d8c3e
GetObject and GetObjectIPs are invoked by the Linksharing service to
display the shared object and its map. These two endpoint currently
require read permission.
There is a use case where an object can be shared with an access grant
that has only list permission. In such a case, the expectation is that
the linksharing service would still display the metadata of the shared
object (name, size, map), but the content would be still inaccessible.
See https://github.com/storj/gateway-mt/issues/209 for details.
This change allows GetObject and GetObjectIPs to require either read or
list permission to support the described use case.
Change-Id: I3477edc7bf8990e9848482890da047094c875d09
We had multiple experiment so far to collect high cardinality data (mainly in aggregated form).
1. we have a `/top` endpoint which aggregates events with upper bound
2. we use same api (eventstat) to publish S3 gateway-mt agents to influxdb
This patch starts to replace theses api with jtolio/eventkit. Instead of aggregation all events can be sent to a collector host where we can do aggregation and/or persisting data.
Change-Id: Id6df4882b51d2dbd2be9401ee4199d14f3ff7186
Context cancellation that aborts a non-essential Redis operation must
not be logged as an error because the operation is intentionally
canceled.
We are actually considering them not to be an error in following
operation because of the same reason and we return a RPC canceled status
code.
On the other hand it doesn't make sense to continue if the context is
canceled because although this is a non-essential operation if this one
is canceled due to the context the next one will be canceled for the
same reason, hence, we return earlier.
Change-Id: Ib3331975adeb06367d1ea0a578263ef50ae3f079
As a reminder
* This counters are for data with high-cardinality
* We have strong upper bound for memory limits
* They can be accessed from /top monitoring interface
Example:
```
curl 172.20.0.10:11111/top
since ~ 2022-08-09T07:45:58Z
auth_request_count project=9094cff8-104e-4956-a367-97ea134b7e06 11.000000
auth_request_buckets 1.000000
auth_request_discarded 0.000000
auth_request_count partner=00000000-0000-0000-0000-000000000000 11.000000
auth_request_buckets 1.000000
auth_request_discarded 0.000000
```
Note: discarded 0 --> we didn't hit the memory limit.
Change-Id: I8db09b4aa61bade55cb324b84b7fbcb8f068c179
removed segment limit validation and checks in metainfo endpoint and accounting/projectusage
since feature is live and has always has segment limitation now
Resolves: https://github.com/storj/storj/issues/4470
Change-Id: I8cf87cbbc40ac61262f9f05e52573d3ae6410611
Previously there was no realtime administration of the storage usage
during copies. Now there is.
Closes https://github.com/storj/storj/issues/4719
Change-Id: I0d536bf551d16208116c3aceac89ed590ec473bf
We can use PieceIDDeriver in all places where we are deriving id from
the same id multiple times. We have serveral such places: gc, segment
deletion, segment validation, order limit creation. Using it should
save some resources.
Change-Id: I24668d516c0f7cea4aec6470614067734149501d
We need to combine methods from accounting.Service (ExceedsStorageUsage and ExceedsSegmentUsage)
to run checks concurrently.
Resolves https://github.com/storj/team-metainfo/issues/73
Change-Id: I47831bca92457f16cfda789da89dbd460738ac97
Refactoring to do few things:
* move simple validation before validations with DB calls
* combine validation check/update for storage and segment
limits together
Change-Id: I6c2431ba236d4e388791d2e2d01ca7e0dd4439fc
This PR utilize the new burst limit column from projects table to allow
control on the limit for request per seconds and token bucket size
When no burst limit is explicitly set, rate limit is applied to both so
we don't limit how quickly request can be made in a second.
Change-Id: I883235c60c5d6416aeadd1c80ed2ebd193aa4d9f
Currently, requests that were successfully passed through the metainfo
endpoints rate-limiter might still fail in the middle of the
corresponding response. The problem is that we perform rate-limiting a
second time, which means other requests would influence whether the
current (already rate-checked) request will fail. This also has other
unintended effects, like responding with rpcstatus.PermissionDenied for
requests that were successfully rate-checked and did not lack
permissions but were rate-checked again in the middle of
(*Endpoint).BeginObject. This situation has been happening on the
gateway side and might affect other uplink clients. This change, where
appropriate, swaps subsequent validateAuth with validateAuthN that
performs rate-limiting once.
Change-Id: I6fc26dedb8c442dd20acaab5942f751279020b08
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
During metainfo refactor we disabled some validation as it was designed to validate pointer. Now part of this validation is restored. This is first part.
Change-Id: I6132f922fe23d60118bbccfdb77fd93c3c81afed
This change is adjusting metainfo endpoint to use metabase for uploading
and downloading remote objects. Inline segments will be added later.
Change-Id: I109d45bf644cd48096c47361043ebd8dfeaea0f3
This change removed unused 'createRequests' struct. As far I remember it
was used to help validating old metainfo beginObject/commitObject flow.
Change-Id: I0f139b9934196d73f26eafa347ba5605722f3a55
To avoid further name collisions, the very broad named package gets moved into
the consoleauth package where its also mainly being used.
Change-Id: Ie563c9700adbf0553baca2b7b8ba4a1d9c29d144
When a request comes in on the satellite api and we validate the
macaroon, we now also check if any of the macaroon's tails have been
revoked.
Change-Id: I80ce4312602baf431cfa1b1285f79bed88bb4497
Automatically attach attribution information to bucket during
BeginObject or CreateBucket when the UserAgent is set.
Change-Id: I405cb26c5a2f7394b30e3f2cf5d2214c8781eb8b
BeginObject response
We want to control inline segment size and segment size on satellite
side. We need to return such information to uplink like with redundancy
scheme.
Change-Id: If04b0a45a2757a01c0cc046432c115f475e9323c
This implements a service for pointer verification. This makes the
slightly clearer, because it's not part of metainfo.
It also adds a peer identity cache which reduces database calls and peer
identity decoding.
Change-Id: I45da40460d579c6f5fd74c69bccea215157aafda
Initial change for checking bucket existence on satellite side for
requests like BeginObject and ListObjects. This is simple implementation
that is just checking bucket in DB but should be improved in future to
avoid DB calls as much as possible.
Part of https://storjlabs.atlassian.net/browse/USR-365
Change-Id: I9076acddc44d7dbfa7612a1c24a007de01621583
Metainfo method validateAuth checks things like API key, user permission
and rate limit but at the end all errors were returned as
rpcstatus.Unauthenticated.
Old Metainfo is not touched to avoid backward compatibility issues.
Change-Id: I78eb276210fc50151da58a5c84e13ecd0961da29
Add monkit metric for the rate-limit when the rate limit is hit
Logs warning with projectID
https://storjlabs.atlassian.net/browse/SM-165
Change-Id: I352dc40006021990d1bc66a999f62bbf8deb54db
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
Improve the piece hash validation filtering out a piece when an order
limit is not found for it.
The commit also improves the documentation of an internal metainfo
method and rename the parameters of 2 methods for clarifying what they
are.
