All the files in uploadselection are (in fact) related to generic node selection, and used not only for upload,
but for download, repair, etc...
Change-Id: Ie4098318a6f8f0bbf672d432761e87047d3762ab
ReliabilityCache will be now using refactored overlay Reliable method.
This method will provide more info about nodes (e.g. country code) and
with this we are able to add two dedicated methods to classify pieces:
* OutOfPlacementPieces
* PiecesNodesLastNetsInOrder
With those new method we will fix issue where offline but reliable node
won't be checked for clumped pieces and off placement pieces.
https://github.com/storj/storj/issues/5998
Change-Id: I9ffbed9f07f4881c9db3bd0e5f0412f1a418dd82
Currently we are using Reliable to get missing pieces for repair
checker. The issue is that now checker is looking at more things than
just missing pieces (clumped/off, placement pieces) and using only node
ID is not enough. We have issue where we are skipping offline nodes from
clumped and off placement pieces check.
Reliable was refactored to get data (e.g. country, lastNet) about all
reliable nodes. List is split into online and offline. This data will be
cached for quick use by repair checker. It will be also possible to
check nodes metadata like country code or lastNet.
We are also slowly moving `RepairExcludedCountryCodes` config from
overlay to repair which makes more sens for it.
This this first part of changes.
https://github.com/storj/storj/issues/5998
Change-Id: If534342488c0e440affc2894a8fbda6507b8959d
We were reusing a slice to save on allocations, but it turns out the
function using it was being called in multiple goroutines at the same
time.
This is definitely a problem with repairer/segments.go. I'm not 100%
sure if it also is a problem with checker/observer.go, but I'm making
the change there as well to be on the safe side for now.
Repair workers only ran with this bug on testing satellites, and it
looks like the worst that could have happened was that we repaired
pieces off of well-behaved, non-clumped, in-placement nodes by mistake.
Change-Id: I33c112b05941b63d066caab6a34a543840c6b85d
Checker when qualifying segment for repair is now looking at pieces
location and if they are outisde segment placement puts them into
repair queue.
Fixes https://github.com/storj/storj/issues/5895
Change-Id: If0d941b30ad94c5ef02fb1a03c7f3d04a2df25c7
rather than only logging the last_nets we see in clumpedPieces, this
will run through all the last_nets and log any that have more than one
node. This should have the same outcome, except the counts will be 1
higher (because FindClumpedPieces won't include the first node found in
a clumped network, and this will).
This should be quite a bit faster.
Change-Id: I6a7b2fd387e98963d5295c9ecfde80f2e1ee3b7a
We were using the UploadSelectionCache previously, which does _not_ have
all nodes, or even all online nodes, in it. So all nodes with less than
MinimumVersion, or with less than MinimumDiskSpace, or nodes suspended
for unknown audit errors, or nodes that have started graceful exit, were
all missing, and ended up having empty last_nets. Even with all that,
I'm kind of surprised how many nodes this involved, but using the upload
selection cache was definitely wrong.
This change uses the download selection cache instead, which excludes
nodes only when they are disqualified, gracefully exited (completely),
or offline.
Change-Id: Iaa07c988aa29c1eb05796ac48a6f19d69f5826c1
It seems that the "what pieces are clumped" code does not work right, so
this logic is causing repair overload or other repair failures.
Hide it behind a flag while we figure out what is going on, so that
repair can still work in the meantime.
Change-Id: If83ef7895cba870353a67ab13573193d92fff80b
Clumped segments (segments with multiple pieces on the same subnet) may
need repair, but the clumped pieces are considered retrievable and we
don't need to call such segments irreparable.
We do want to know where they're coming from, though, if we can, because
we are seeing more than expected.
Change-Id: I41863b243f4bb007ef8929191a3fde1562565ef9
The query for GetNodesNetworkInOrder is causing far too much load on the
database. Since it is not critical that the repair checker have
perfectly up-to-date node network information, we can use a cache
instead.
Change-Id: I07ad45bfdeb46529da093941a06c2da8a00ce878
We will remove segments loop soon so we need first to move
Segment definition to rangedloop package.
https://github.com/storj/storj/issues/5237
Change-Id: Ibe6aad316ffb7073cc4de166f1f17b87aac07363
We avoid putting more than one piece of a segment on the same /24
network (or /64 for ipv6). However, it is possible for multiple pieces
of the same segment to move to the same network over time. Nodes can
change addresses, or segments could be uploaded with dev settings, etc.
We will call such pieces "clumped", as they are clumped into the same
net, and are much more likely to be lost or preserved together.
This change teaches the repair checker to recognize segments which have
clumped pieces, and put them in the repair queue. It also teaches the
repair worker to repair such segments (treating clumped pieces as
"retrievable but unhealthy"; i.e., they will be replaced on new nodes if
possible).
Refs: https://github.com/storj/storj/issues/5391
Change-Id: Iaa9e339fee8f80f4ad39895438e9f18606338908
It was surprising that `satellite auditor` complained about SMTP mail settings, even if it's not supposed to sending any mail.
Looks like we can remove the mail service dependency, as it's not a hard requirement for overlay.Service.
Change-Id: I29a52eeff3f967ddb2d74a09458dc0ee2f051bd7
Additional elements added:
* monkit metric for observers methods like Start/Fork/Join/Finish to
be able to check how much time those methods are taking
* few more logs e.g. entries with processed range
* segmentsProcessed metric to be able to check loop progress
Change-Id: I65dd51f7f5c4bdbb4014fbf04e5b6b10bdb035ec
implemented observer and partial, created new structures to keep mon
metrics remain in same way as in segment loop
Change-Id: I209c126096c84b94d4717332e56238266f6cd004
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
We want to send emails to SNOs. Node status changes go through the
overlay service, so it's a good place to add the mail service.
Add the mailservice.Service, satellite address, and satellite name to
overlay service. Also add feature flag --overlay.send-node-emails
Change-Id: I3bd2cb3bf22f9724954ce2374f8b651b902b3a24
It looks that monikt monitoring can give high CPU overhead for
segments loop observer. With this code we are changing how monitoring
is initialized for observer methods. This optimization affects mainly
path where segment is healthy and doesn't require repair. Benchmark
is also added to show difference between old and new approach.
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/healthy_segment-8 8.55µs ± 4% 1.37µs ± 6% -84.03% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/healthy_segment-8 2.63kB ± 0% 0.17kB ± 0% -93.62% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/healthy_segment-8 54.0 ± 0% 8.0 ± 0% -85.19% (p=0.008 n=5+5)
Change-Id: Ie138eab0d59e436395b13f57bdfb11f9871d4c18
We made optimization for segment loop observers to avoid
heavy monkit initialization on each call. It was applied to very
often executed methods. Unfortunately we used wrong monkit
method to track function times. Instead mon.Task we used
mon.Func().
https://github.com/spacemonkeygo/monkit#how-it-works
Change-Id: I9ca454dbd828c6b43ba09ca75c341991d2fd73a8
Recently we applied this optimization to metrics observer and time
used by its method dropped from 12m to 3m for us1 (220m segments).
It looks that it make sense to apply the same code to all observers.
Change-Id: I05898aaacbd9bcdf21babc7be9955da1db57bdf2
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
Add a RepairExcludedCountryCodes config flag for overlay for providing a list of country codes to exclude nodes from target repair selection.
Mark segments with less than repairThreshold pieces in countries not in the RepairExcludedCountryCodes as not healthy.
With this change, the repair process is not affected. The segment will be removed from the repair queue by the repairer.
Another change will handle the logic at the repairer level.
Fixes https://github.com/storj/team-metainfo/issues/95
Change-Id: I9231b32de117a116488de055a3e94efcabb46e81
This change introduce problems with server side move so
let's revert it for now. Problem was found when latest
version of storj/storj was used in uplink tests.
This reverts commit 1ef06fae99.
Change-Id: I4d4fad5d1ea04ba15ff9d7bd765f7e078e9187c2
We were using mixed types for nonce fields. Protobuf
have storj.Nonce, metabase have []byte. This change
is a refactoring to have everywere its possible only
storj.Nonce.
Change-Id: Id54bd8481f30c721cdaf3df79206d25e7cfdab55
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
Error from joining loop should not restart satellite. This will be the
same error like for loop itself. In the same way we are handling joining
error for other services that are using segment loop.
Change-Id: Idf1035ef7f78462927bd23989ed8a4ee5826c49e
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
Check that the bloom filter creation date is earlier than the
metainfo loop system time used for db scanning.
Change-Id: Ib0f47c124f5651deae0fd7e7996abcdcaac98fb4
Repair checker expects to have information about CreatedAt and RepairedAt fields to calculate segment age metric.
Change-Id: I6b41df880d77133be541e14d10d91cc75759b339
We have multipart objects so we may get multiple inline segments
sequences or no segments at all for objects.
Change-Id: Ie46ee777a2db8f18f7154e3443bb9e07ecb170f7
