Use overlay db node as primary source of truth for reputation status when node
query it's status via Endpoint.Get. If node was was disqualified in overlay reputation
status may be inconsistend with reputation table.
Change-Id: I1bf858a4b020324035847a9215ef29cf5432f6a4
comment tests that contains fields needs
to rename on uplink side without breaking compatibility.
after rename tests will be moved back from comments.
Change-Id: I3bc4aff6ae7f6711ade956ac389f0d7e1a1ab91a
comment tests that contains fields needs
to rename on uplink side without breaking compatibility.
after rename tests will be moved back from comments.
Change-Id: I439783c62678c32805a85aa52bef1d2b767543a1
We want to be able to limit the number of segments per project for users.
To limit this we need to check limit value associated with project
and value of used segments already in BeginMoveObject, BeginMoveSegment
and increment cache segments usage after each CommitSegment call.
Resolves https://github.com/storj/team-metainfo/issues/1
Change-Id: I6290e67c095a174b9d101c4521802d9bfe0453b8
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
Batching of the order submissions can lead to combining the allocated
traffic totals for two completely different time windows, resulting
in incorrect customer accounting. This change will group the batched
order submissions by projectID as well as time window, leading to
distinct updates of a buckets bandwidth rollup based on the hour
window in which the order was created.
Change-Id: Ifb4d67923eec8a533b9758379914f17ff7abea32
We want to issue a reminder to users when they don't verify their email within 24hrs of registering. This change only adds a column to the users table.
Change-Id: I92e2baeabf179338ffec01574d4752c0ccdba88b
This allows us to distinguish between accounts created from the signup
page vs. from www.storj.io.
Also set a field `account_created=true` when we send so
that we can see when existing leads have created an account.
Change-Id: Ibef34825a08b6c68b8f2869625e576bb837520e5
At some point we missed to add metadata key to list objects
response. Because of that uplink is taking key from pb.SteamMeta.
We need to clean it up.
Tests will be added on uplink side.
https://github.com/storj/uplink/issues/71
Change-Id: I3328e2f1b86bca15aeaf89f8e59cdca3c8e97742
We enabled this chore on different satellites
for testing. Works fine so we can enable this
by default for all configurations.
Change-Id: I987639685d8de5c7e5798adca30fe26bdac9e1d1
Currently most of the satellite log is made up by this specific log
message and thus we should increase the log level. We already have
a monkit event tracking this case. In case we need to look into this
more we should just increase the satellite log level.
Change-Id: I27ebed3e6745701c66c83e8c52ddc836ad9d5f4e
I introduced a change in the UI that was a better way to dynamically
render Svelte components
(https://review.dev.storj.io/c/storj/storj/+/5931/4..5) during the
review of the first version of it, however, while it works perfectly
on development mode it doesn't work when the assets are built for
production, failing silently, because the constructor name get renamed
due to the name mangling caused by the minifyer as stated in the
following issue: https://github.com/sveltejs/svelte/issues/6980
This commit use a different alternative not based on the constructor
name and it works fine with the production build.
Change-Id: I643c405f877a9206cf0e51b44d5138e5a9756a79
Migrate the satellite admin UI web app from the Svelte template used to
generate a Svelte App scaffolding to SvelteKit.
There aren't any functional changes in the application, however, the
commit has a lot because:
1. SvelteKit uses a different directory layout and constraints to it, so
the files have been moved.
2. The files have changed its formatting due to the new default linter
configurations that SvelteKit uses.
3. The linter detected some issues with using `object` and `any` types
in Typescript, so they have been replaced by better general types
(e.g. Record).
The migration allows to use the new tooling rather than Rollup
directly, besides that will empower the future of it when it needs more
features (e.g. different routes, etc.).
Change-Id: Ifa6736c13585708337f6c5a59388077b784eaddd
All limits we have for projects have also parent limits stored
with user data. New created project is first taking limits from
owner (user) limits.
This change is extending users table with project_segment_limit
column and adds functionality to get and set value for this
column.
Change-Id: Iff5e36c62b517652390b649fc05992475916ecff
This change disallows creation of users possessing the same email.
If a user attempts to create an account with an email address
that's already used - whether it belongs to an active account or not -
he will be notified of unsuccessful account creation. If he attempts to
log in using an email address belonging to an inactive account,
he will be presented with a link allowing him to re-send the
verification email. Attempting to register with an email address
belonging to an existing account triggers a password reset email.
Change-Id: Iefd8c3bef00ecb1dd9e8504594607aa0dca7d82e
When we switched to segments loop we stopped
adding bucket name and project ID to order limit
metadata. This is causing lots of logging that we don't need.
Change-Id: Id3f878a170b7a6b801e8a838ee69165715985d60
For backward compatibility we are overriding pb.StreamMeta
values returned as encrypted metadata. It turns out that we
should do it not when target values are missing but when
values to override exists.
This was causing problems after move operation. Details can be
found here https://github.com/storj/uplink/issues/70
Backward compatibility test will be added to storj/uplink testsuite.
Change-Id: I72e7a01226b1dd62902cb0d6ebb1ff91a4693005
We want to set maximum number of segments per project. This change will
add functionality to get number of segments currently used by project.
To avoid often DB calls segment cound will be cached and refreshed every
few minutes.
Change-Id: I2ecb6484f5afc3875c0e0dfaea360e8872f9d196
Exposes functionality to get and update project segment
limit. It will be used to limit number of segments per project
while uploading object.
Change-Id: I971d48eebb4e7db8b01535c3091829e73437f48d
Previously, only valid partner IDs could be used for bucket level value attribution. Now that any useragent byte slice can be used, we should allow for empty useragent strings to be stored rather than throwing an error or leaving the bucket with no attribution.
Change-Id: I7043f835588dab1c401a27e31afd74b6b5a3e44b
Currently detecting if error NotFound is for object
or bucket is very fragile on uplink side. We cannot
change this messages for now.
Change-Id: I6ec4d98116477812f031134e4f1c9e73bdce8b27
We want to set maximum number of segments per
project. This change adds only column to projects table.
Default value 1M is set to make later migration easier as
we need to set 1M for paid tier users and 140K for free
tier users.
Change-Id: I8e83712e08c5bd91dfa59f652d17e45c14240a36
Added new query to get project object and segment count.
Added appropriate object and segment count view for new project dashboard.
Change-Id: I69a2e55442f318c51dc365c0c578b964f2f06c7f
Move an endpoint that was classified to return the geofence
configuration of a bucket to return the bucket information, which
also include the geofence configuration, because it's what it was
returning.
Change-Id: I0e0a6aac330296383a50a92d2352df9088df77d5
The satellite admin server was augmented with 3 new endpoints to manage
buckets geofencing configurations, however, they weren't created in the
admin UI API class for making them available in the web interface.
This commit adds these new endpoints to the admin UI.
Change-Id: If060d1f10a3bc6c365e16a891673d4ffc89e4b41
This reverts commit 2c0a360a14.
Avoid big transactions. We'll do it outside of the migration pipeline.
Change-Id: Iade810d81bb2453c9e351149cb84662b207ee527
Value attribution codes were converted into UUIDs and stored in the users, projects, api_keys, bucket_metainfos, and value_attributions tables in the partner_id column. This migration will lookup the appropriate partner name associated with each of these UUIDs, and store the partner name directly in the user_agent column within each table. If an error occurs during the partner ID to partner name conversion, the partner ID value will be migrated to user_agent.
A note on the migration test data, postgres.v182.sql:
With one exception, all preexisting rows in the relevant tables had a NULL partner_ID. Therefore, we needed to insert new rows with partner_ID set under the OLD DATA section in order to test that the migration works. For each affected table, we insert one row with a valid partner ID which has a corresponding partner name, and one row with a partner ID which would return an error during the conversion to the partner name.
Change-Id: Iad977d72df0ce95a0c5ca80a065c4276ec1f2354
This new method will be used with mechanism to limit number
of segments per project, similar to limiting buckets or bandwidth.
This is only one of multiple changes we will do to implement this
limitation.
Change-Id: Ia516c2a006ad1d7b4431d780679be9d809848f4b
Check if the context is done at the beginning of the download object and
segment and return right away if it's the case.
Check if Redis returned an error due to context cancellation for not
logging the error.
Change some logging messages of Redis errors to reflect on them if the
error happens while downloading an object or a segment.
Change-Id: I8ed8ff9ff7bb170b560f41356ea06820ce6c4e12
If satellite can't find enough nodes to successfully download a segment,
it probably is not the fault of storage nodes.
Change-Id: I681f66056df0bb940da9edb3a7dbb3658c0a56cb
