Add a RepairExcludedCountryCodes config flag for overlay for providing a list of country codes to exclude nodes from target repair selection.
Mark segments with less than repairThreshold pieces in countries not in the RepairExcludedCountryCodes as not healthy.
With this change, the repair process is not affected. The segment will be removed from the repair queue by the repairer.
Another change will handle the logic at the repairer level.
Fixes https://github.com/storj/team-metainfo/issues/95
Change-Id: I9231b32de117a116488de055a3e94efcabb46e81
The "satellite fetch-pieces" command allows a satellite operator to
fetch as many pieces of a segment as possible, along with their
original order limits and hashes as provided by the storage nodes. The
fetched pieces and associated info will be stored on in a specified
folder as they are, rather than being RS-decoded or decrypted.
It is hoped that this will allow easier debugging of certain one-off
problems we've observed in the wild.
Change-Id: I42ae0e9ef0023538e42473a9be5a2460a3ac0f3a
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
If satellite can't find enough nodes to successfully download a segment,
it probably is not the fault of storage nodes.
Change-Id: I681f66056df0bb940da9edb3a7dbb3658c0a56cb
work
Since we have changed the repair worker to also mark a node as audit
failure if they return a not found error, we should ignore expired
segments when possible
Change-Id: Ie6a677e1d7b234e93965c736d05950440236653c
This change introduce problems with server side move so
let's revert it for now. Problem was found when latest
version of storj/storj was used in uplink tests.
This reverts commit 1ef06fae99.
Change-Id: I4d4fad5d1ea04ba15ff9d7bd765f7e078e9187c2
We were using mixed types for nonce fields. Protobuf
have storj.Nonce, metabase have []byte. This change
is a refactoring to have everywere its possible only
storj.Nonce.
Change-Id: Id54bd8481f30c721cdaf3df79206d25e7cfdab55
Update repair tests to check if audit score increases for nodes
that successfully send pieces during successfull and failed repairs.
Change-Id: Ie6abbde6155ab4697d209366c9fa497e731756e9
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
When we can't complete an audit or repair, we need more information about
what happened during each individual share/piece download.
In audit, add the number of offline, unknown, contained, failed nodes to
the error log. In repair, combine the errors from each download and add
them to the error log.
Change-Id: Ic5d2a0f3f291f26cb82662bfb37355dd2b5c89ba
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
This change adds dedicated methods on metabase.Pieces to be able to add, remove pieces and also to check duplicates.
Change-Id: I21aaeff40c017c2ebe1cc85a864ae546754769cc
Error from joining loop should not restart satellite. This will be the
same error like for loop itself. In the same way we are handling joining
error for other services that are using segment loop.
Change-Id: Idf1035ef7f78462927bd23989ed8a4ee5826c49e
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Piece hash verification failures during repair download are considered
audit failures, but we are not logging these occurrences. Now we log
them.
Change-Id: If456cebcfda6af7a659be3d1fc74448e681fb653
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
Check that the bloom filter creation date is earlier than the
metainfo loop system time used for db scanning.
Change-Id: Ib0f47c124f5651deae0fd7e7996abcdcaac98fb4
Repair checker expects to have information about CreatedAt and RepairedAt fields to calculate segment age metric.
Change-Id: I6b41df880d77133be541e14d10d91cc75759b339
At some point we might try to change original segment RS values and set Pieces according to the new values. This change adds add NewRedundancy parameter for UpdateSegmentPieces method to give ability to do that. As a part of change NewPieces are validated against NewRedundancy.
Change-Id: I8ea531c9060b5cd283d3bf4f6e4c320099dd5576
We have multipart objects so we may get multiple inline segments
sequences or no segments at all for objects.
Change-Id: Ie46ee777a2db8f18f7154e3443bb9e07ecb170f7
