This PR utilize the new burst limit column from projects table to allow
control on the limit for request per seconds and token bucket size
When no burst limit is explicitly set, rate limit is applied to both so
we don't limit how quickly request can be made in a second.
Change-Id: I883235c60c5d6416aeadd1c80ed2ebd193aa4d9f
server-side move extended with moving between buckets, for this reason
we change bucket name for object in db.
Change-Id: Ie21bcccc170e6ff14dcd8053fdb86fdf6d8438a0
Some processing inside storagenodes is async compared to uplink upload
and download, hence we need to explicitly wait for storagenodes to
finish their pending work before flushing orders to the satellite.
Hopefully this fixes TestAttributionReport flakiness.
Change-Id: I77c651ab6471ae094b5c21d1ab3860c96cb0d039
Second method needed to perform server-side move. It updates
metadata key and nonce and all segments key and nonces.
Change-Id: Ia43b26622a13048269f0ae9e1524b345db112adb
First from two methods needed to perform server-side move. It gets
metadata key and nonce and all segments key and nonces and returns
all of that to uplink.
Change-Id: Ied2c79559e77d3f63091c4d61948f2d6a2147d67
Currently, requests that were successfully passed through the metainfo
endpoints rate-limiter might still fail in the middle of the
corresponding response. The problem is that we perform rate-limiting a
second time, which means other requests would influence whether the
current (already rate-checked) request will fail. This also has other
unintended effects, like responding with rpcstatus.PermissionDenied for
requests that were successfully rate-checked and did not lack
permissions but were rate-checked again in the middle of
(*Endpoint).BeginObject. This situation has been happening on the
gateway side and might affect other uplink clients. This change, where
appropriate, swaps subsequent validateAuth with validateAuthN that
performs rate-limiting once.
Change-Id: I6fc26dedb8c442dd20acaab5942f751279020b08
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
Two small cleanups:
* merging private commitObject, commitSegment,
makeInlineSegment with its public versions. We were
using it when pb.Pointer was still used.
* removing unused CreatePath method
Change-Id: Ib18b07473d91259335dab874559ef52412ab813d
We're seeing BeginDeleteObject in metaclient returning object not found:
metabase: no rows deleted in the Gateway-MT mint tests. There's a
client check for rpcStatus.NotFound, but the metabase endpoint isn't
wrapping the db error as a DRPC error.
Here's the chain:
gateway.AbortMultipartUpload()
project.AbortUpload()
metainfoClient.BeginDeleteObject() <- understands DRPC errors
endpoint.DeletePendingObject() <- where this code is
db.DeletePendingObject() <- returns error
Change-Id: I93991de76487426df0a807b0d1e69fc975196a1a
We need a way to delete whole part. This especially
needed for uplink multipart API to do cleanup after
aborted or failed part upload.
Test will be added when uplink part will be merged.
Change-Id: I9ba69a49e1adcdce0f42dd3a76f938fcf931155a
Added includeMetadata parameter which represents if metadata should be included in response
by default true, in case of new uplink version - ObjectIncludes will be used instead.
Change-Id: I2f8d3b4cc354cd655f8093bbbebe0e3c2ae14e6f
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
We added expires_at column to segments table and now
we need to populate this column while committing segment.
We still need to migrate existing segments with
separate tool.
Change-Id: Ibac8c63d97201dd98cc2cb9db385f4cb73bc3f7e
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Previously the object range was not used for calculating order limit.
This meant that even if you were downloading only a small range it would
account bandwidth based on the full segment.
This doesn't fully address the accounting since the lazy segment
downloads do not send their requested range nor requested limit.
Change-Id: Ic811e570c889be87bac4293547d6537a255078da
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
The system and database time may drift. We should use database time for
absolute "as of system time" to ensure that it's not newer than the
current database time. When the "as of system time" is in the future,
then the query will fail.
Change-Id: I5423f6aaad966ca03a76b5ff805bfba932e44a51
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
The cursor was not being used in the batch deletion.
The stream ID was not being used while deleting, which could in rare
circumstaces delete a newly uploaded object.
Use the stream id in deletion, rather than passing that information from
one query to another.
Change-Id: I03271c6e72747e345dfb0bb70989f29e835efd8e
Check that the bloom filter creation date is earlier than the
metainfo loop system time used for db scanning.
Change-Id: Ib0f47c124f5651deae0fd7e7996abcdcaac98fb4
