This change adds dedicated methods on metabase.Pieces to be able to add, remove pieces and also to check duplicates.
Change-Id: I21aaeff40c017c2ebe1cc85a864ae546754769cc
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Piece hash verification failures during repair download are considered
audit failures, but we are not logging these occurrences. Now we log
them.
Change-Id: If456cebcfda6af7a659be3d1fc74448e681fb653
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
At some point we might try to change original segment RS values and set Pieces according to the new values. This change adds add NewRedundancy parameter for UpdateSegmentPieces method to give ability to do that. As a part of change NewPieces are validated against NewRedundancy.
Change-Id: I8ea531c9060b5cd283d3bf4f6e4c320099dd5576
It's impossible to time correctly this check. The segment may expire
just at the time we upload the repaired pieces to new storage nodes.
They will reject this as expired and the repair will fail.
Also, we penalize storage nodes with audit failure only if they fail
piece hash verification, i.e. return incorrect data, but only if they
have already deleted the piece.
So, it would be best if the repair service does not care about object
expiration at all. This is a responsibility of another service.
Removing this check will also simplify how we migrate this code
correctly to the metabase.
Change-Id: I09f7b372ae2602daee919a8a73cd0475fb263cd2
Rather than having a single repair override value, we will now support
repair override values based on a particular segment's RS scheme.
The new format for RS override values is
"k/o/n-override,k/o/n-override..."
Change-Id: Ieb422638446ef3a9357d59b2d279ee941367604d
Firstly, this changes the repair functionality to return Canceled errors
when a repair is canceled during the Get phase. Previously, because we
do not track individual errors per piece, this would just show up as a
failure to download enough pieces to repair the segment, which would
cause the segment to be added to the IrreparableDB, which is entirely
unhelpful.
Then, ignore Canceled errors in the return value of the repair worker.
Apparently, when the worker returns an error, that makes Cobra exit the
program with a nonzero exit code, which causes some piece of our
deployment automation to freak out and page people. And when we ask the
repair worker to shut down, "canceled" errors are what we _expect_, not
an error case.
Change-Id: Ia3eb1c60a8d6ec5d09e7cef55dea523be28e8435
The current monkit reporting for "remote_segments_lost" is not usable for
triggering alerts, as it has reported no data. To allow alerting, two new
metrics "checker_segments_below_min_req" and "repairer_segments_below_min_req"
will increment by zero on each segment unless it is below the minimum
required piece count. The two metrics report what is found by the checker
and the repairer respectively.
Change-Id: I98a68bb189eaf68a833d25cf5db9e68df535b9d7
With the new overlay.AuditOutcome type for offline audits, the
IsUp field is redundant. If AuditOutcome != AuditOffline, then
the node is online.
In addition to removing the field itself, other changes needed
to be made regarding the relationship between 'uptime' and 'audits'.
Previously, uptime and audit outcome were completely separated. For
example, it was possible to update a node's stats to give it a
successful/failed/unknown audit while simultaneously indicating that
the node was offline by setting IsUp to false. This is no longer possible
under this changeset. Some test which did this have been changed slightly
in order to pass.
Also add new benchmarks for UpdateStats and BatchUpdateStats with different
audit outcomes.
Change-Id: I998892d615850b1f138dc62f9b050f720ea0926b
This change removes the overlay function FindStorageNodesForRepair,
which skips using the node selection cache and hits the database
directly. Otherwise, it is functionally identical to
FindStorageNodesForUpload, which checks the node selection cache first.
When selecting nodes for PUT_REPAIRs, we now call
FindStorageNodesForUpload instead of FindStorageNodesForRepair to reduce
database load.
Change-Id: If34e109695b2ed2b8fb6759115bf769a3459684e
It feels weird having a repairer configuration part of order services.
Let's have a single source of truth for it.
Change-Id: I24f7c897aec80f3293f8af24876cbb6733d85a0b
Inside CreateGetRepairOrderLimits we pass in a list of healthy pieces,
but when we query node info from this list we apply the "reliable" filter
again. We sometimes end up with nodes which at first were healthy, but then
became unhealthy, and thus can be repaired, but we do not update the 'unhealthyPieces'
list with these nodes.
This causes an error, 'piece to add already exists', as we fail to remove these
pieces from the pointer before replacing them with repaired pieces.
Change-Id: I6e2445f342ac117ded30351fa7e5e523c9ec26bd
Adds monkit tracing for ecrepairer.downloadAndVerifyPiece and
ecrepairer.putPiece so we can get more accurate estimates of node
performance during repair.
Change-Id: Ic05025bf3c493bb3d6f5d325d090c5b7c9e5465d
This will speed up the Put step of repair by not waiting to time out for
a handful of slow nodes, at the expense of a slightly less durable
pointer. It will still repair to the optimal threshold, but not every
node that is selected will end up in the pointer.
Change-Id: I02a0658e3fe6fc0383f26af0f50a065b8b11a651
* Delete expired segments in expired segments service using metainfo
loop
* Add test to verify expired segments service deletes expired segments
* Ignore expired segments in checker observer
* Modify checker tests to verify that expired segments are ignored
* Ignore expired segments in segment repairer and drop from repair queue
* Add repair test to verify that a segment that expires after being
added to the repair queue is ignored and dropped from the repair queue
Change-Id: Ib2b0934db525fef58325583d2a7ca859b88ea60d
* satellite: update log levels
Change-Id: I86bc32e042d742af6dbc469a294291a2e667e81f
* log version on start up for every service
Change-Id: Ic128bb9c5ac52d4dc6d6c4cb3059fbad73f5d3de
* Use monkit for tracking failed ip resolutions
Change-Id: Ia5aa71d315515e0c5f62c98d9d115ef984cd50c2
* fix compile errors
Change-Id: Ia33c8b6e34e780bd1115120dc347a439d99e83bf
* add request limit value to storage node rpc err
Change-Id: I1ad6706a60237928e29da300d96a1bafa94156e5
* we cant track storage node ids in monkit metrics so lets use logging to track that for expired orders
Change-Id: I1cc1d240b29019ae2f8c774792765df3cbeac887
* fix build errs
Change-Id: I6d0ffe058e9a38b7ed031c85a29440f3d68e8d47
Add flag to satellite repairer, "InMemoryRepair" that allows the
satellite to decide whether to download the entire segment being
repaired into memory (this is what the satellite already does), or to
download it into temporary files on disk that will be read from in the
upload phase of repair.
This should help with handling high repair traffic on satellites that
cannot afford to spend 64mb of memory per repair worker.
Updates tests to test repair for both in memory and to disk.
Change-Id: Iddf591e165621497c98533d45bfea3c28b08a194
* change overlay.UpdateStats to allow a third audit outcome. Now it can
handle successful, failed, and unknown audits.
* when "unknown audit reputation"
(unknownAuditAlpha/(unknownAuditAlpha+unknownAuditBeta)) falls below the
DQ threshold, put node into suspension.
* when unknown audit reputation goes above the DQ threshold, remove node
from suspension.
* record unknown audits from audit reporter.
* add basic tests around unknown audits and suspension.
Change-Id: I125f06f3af52e8a29ba48dc19361821a9ff1daa1
Previously, we were simply discarding rows from the repair queue when
they couldn't be repaired (either because the overlay said too many
nodes were down, or because we failed to download enough pieces).
Now, such segments will be put into the irreparableDB for further
and (hopefully) more focused attention.
This change also better differentiates some error cases from Repair()
for monitoring purposes.
Change-Id: I82a52a6da50c948ddd651048e2a39cb4b1e6df5c
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
This new repair timeout (configured as TotalTimeout) will include both
the time to download pieces and the time to upload pieces, as well as
the time to pop the segment from the repair queue.
This is a move from Github PR #3645.
Change-Id: I47d618f57285845d8473fcd285f7d9be9b4318c8
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
* update audit status as failed for nodes that failed piece hash verification
* remove comment
* fix lint error
* add test
* fix format
* use named return value for Get
* add comments
* add more better comment
* format
* add outline for ECRepairer
* add description of process in TODO comments
* begin download/getting hash for a single piece
* verify piece hash and order limit during download
* fix download piece
* begin filling out ESREpair. Get
* wip move ecclient.Repair to ecrepairer.Repair
* pass satellite signee into repairer
* reconstruct original stripe from pieces
* move rebuildStripe()
* calculate piece size differently, increment successful count
* fix shares slices initialization
* rename stripeData to segment
* do not pad reader in Repair()
* temp debug
* create unsafeRSScheme
* use decode reader
* rename file name to be all lowercase
* make repair downloader async
* declare condition variable inside Get method
* set downloadAndVerifyPiece's in-memory buffer to be share size
* update unusedLimits var
* address comments
* remove unnecessary comments
* move initialization of segmentRepaire to be outside of repairer service
* use ReadAll during download
* remove dots and move hashing to after validating for order limit signature
* wip test
* make sure files exactly at min threshold are repaired
* remove unused code
* use corrput data and write back to storagenode
* only create corrupted node and piece ids once
* add comment
* address nat's comment
* fix linting and checker_test
* update comment
* add comments
* remove "copied from ecclient" comments
* add clarification comments in ec.Repair
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
