before dbx would generate a compilcated blob of conditions that
encoded a row comparison, which only optimized to an index seek
on cockroachdb. this means that sqlite and postgres both had
quadratic behavior on paged queries of this form. instead, use
the implicit row construction feature supported in all of the
databases to do paged support so that they all optimize well.
Change-Id: Iac8703929ba2a59ee3ffa619b916d12663422887
This reverts commit 8772867855.
for uplink versions v0.25.0 through v0.30.7, there's a bug with multiplesegment upload
where the last segment is inline caused by this commit.
Change-Id: If375e186b23265586caf08991c25980e99f3cc1a
Change is adding object deletion to BeginObject request (before upload).
Now when satellite controls deletion we can move deletion before upload
to satellite. This change improves two things:
* no need for additional request to delete object before upload (need
one more change to storj/uplink)
* fix an issue with lack of permissions to upload if caveat allows only
for writing (e.g. disallow deletes but allows to write)
https://storjlabs.atlassian.net/browse/V3-3362
Change-Id: Ic453146298cdd302df290c532123731a3f99e38e
The old migration was not working. It was updateding pending (status 0)
and failed (status -1) to completed (status 100).
Change-Id: I808ff3cc692fe6c698ce26a8b411b134e67b752b
For the last few month we had no issues with order submission. I would
call it stable and now it is time to risk a lower expire time. This will
increase the database performance on the satellite and it will reduce
the delay for billing.
The long term goal is 6h but for that step we need to change graceful
exit first. At the moment storage nodes would get disuqlaified for not
transfering alle pieces in less than 6 hours.
Change-Id: I421a2c2421c5374c4e706e2338f1c2161fedc14c
paths are organized as follows:
project_id/segment_index/bucket_name/encrypted_key
so by picking parts[0] and parts[1], we were using the segment
index instead of the bucket name, causing bandwidth to be
accounted for incorrectly. additionally, we were using the
PUT action instead of the PUT_GRACEFUL_EXIT action, causing
the data to be charged incorrectly. we use PUT_REPAIR for
now because nodes won't accept uploads with PUT_GRACEFUL_EXIT
and our tables need migrations to handle rollups with it.
Change-Id: Ife2aff541222bac930c35df8fcf76e8bac5d60b2
Enable a new golangci-lint linter that has been added to the last
release. It reports a very little number of issues so they are fix it in
this commit.
Change-Id: I74fef4779c3f592aae19103fd9f70103586fe24e
Change DeleteObjectPieces for deleting the segments' pointers of an
object in a reverse order.
Last segment: L
N: total number of segments
Deleting in reverse order is: L, n-1 to 0
Deleting in reverse order makes BeginDeleteObject usable to delete
partially uploaded objects that were interrupted (e.g. upload
cancellation).
With this change, the uplink upload cancellation, can be changed to use
BeginDeleteObject to cleanup already uploaded segments without having to
retrieve orders and dial every single node which stored a piece.
Ticket: https://storjlabs.atlassian.net/browse/V3-3525
Change-Id: Ieca6fd3801c4b71671811cb5f08a99d5146928a6
A uuid.UUID is an array of bytes, and slicing it refers to the
underlying value, much like taking the address. Because range
in Go reuses the same value for every loop iteration, this means
that later iterations would overwrite earlier stored project
ids. We fix that by making a copy of the value before slicing it
for every loop iteration.
Change-Id: Iae3f11138d11a176ce360bd5af2244307c74fdad
A few variables were not renamed to the new standard piecesTotal and
piecesContentSize, so it was unclear which value was being used. These
have been updated, and some comments made more thorough.
Change-Id: I363bad4dec2a8e5c54d22c3c4cd85fc3d2b3096c
This change updates the storagenode piecestore apis to expose access to
the full piece size stored on disk. Previously we only had access to
(and only kept a cache of) the content size used for all pieces. This
was inaccurate when reporting the amount of disk space used by nodes.
We now have access to the total content size, as well as the total disk
usage, of all pieces. The pieces cache also keeps a cache of the total
piece size along with the content size.
Change-Id: I4fffe7e1257e04c46021a2e37c5adc6fe69bee55
Currently we risk losing pending bandwidth rollup writes even on a clean
shutdown. This change ensures that all pending writes are actually
written to the db when shutting down the satellite.
Change-Id: Ideab62fa9808937d3dce9585c52405d8c8a0e703
Currently storage tests were tied to the default lookup limit.
By increasing the limits, the tests will take longer and sometimes
cause a large number of goroutines to be started.
This change adds configurable lookup limit to all storage backends.
Also remove boltdb.NewShared, since it's not used any more.
Change-Id: I1a052f149da471246fac5745da133c3cfc27582e
Currently Cockroach DB setup takes a significant amount of time.
This flattens the database setup into a single query,
which improves the test time significantly.
The migration tests still test each migration separately.
Change-Id: Iaca16f34a6af3926fa2b5ebf618f939fd59460b3
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
Since incoming times may be in any time zone, and we want the output
to be in UTC and for them to have 00:00:00 hours, minutes and seconds
we first convert the incoming timestamp to UTC before doing the
truncate to the day and adding a day.
Because the old code always returned a timestamp that was in the
future, this is just for efficiency.
Change-Id: Ie692d47bca8691e73852c822d5c56cf8773d99b4
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these request as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
Change-Id: If170e78c8410f5ba5916cbff6a29b9221db9ce2e
Replace all the remaining uses of sql.DB with tagsql.DB to
fix issues with context cancellation.
Introduce tagsql.Open which helps to get rid of all tagsql.Wrap-s.
Use tagsql in cockroachkv and postgreskv.
Change-Id: I8946d203341cb85a25976896fc7881e1f704e779
Not having a skew caused an issue where:
1. Uplink calls "begin segment", where segment isn't committed to the
database.
2. Uplink stores piece X to the storage node A with timestamp 1.
3. Satellite runs garbage collection with timestamp 2.
4. Satellite sends retain request to storage node A with timestamp 2.
5. Storage node A deletes piece X, because 1 < 2.
6. Uplink calls "commit segment" with storage node A in it.
7. Download of segment fails, because A doesn't have piece X.
In production this is not an issue since the MaxTimeSkew is 72h by
default.
Change-Id: Id87ca3ddc44103dcd85d031b1367168c014b8e7b
Also added temporary types withRebind and withTagTx,
which will be later removed. Currently they help to avoid
changing the whole codebase at the same time.
Change-Id: I7f07ba8f4709a23a463bfa67464628665a05808f
warning: databases migrated to version 77 before this commit
is merged must be manually re-migrated. this should not be a
problem for anything but staging databases.
Change-Id: Ie1631c48379472352014183ee43f1465e22200f7
live accounting used to be a cache to store writes before they are picked up during
the tally iteration, after which the cache is cleared. This created a window in which
users could potentially exceed the storage limit. This PR refactors live accounting to
hold current estimations of space used per project. This should also reduce DB load
since we no longer need to query the satellite DB when checking space used for limiting.
The mechanism by which the new live accounting system works is as follows:
During the upload of any segment, the size of that segment is added to its respective
project total in live accounting. At the beginning of the tally iteration we record
the current values in live accounting as `initialLiveTotals`. At the end of the tally
iteration we again record the current totals in live accounting as `latestLiveTotals`.
The metainfo loop observer in tally allows us to get the project totals from what it
observed in metainfo DB which are stored in `tallyProjectTotals`. However, for any
particular segment uploaded during the metainfo loop, the observer may or may not
have seen it. Thus, we take half of the difference between `latestLiveTotals` and
`initialLiveTotals`, and add that to the total that was found during tally and set that
as the new live accounting total.
Initially, live accounting was storing the total stored amount across all nodes rather than
the segment size, which is inconsistent with how we record amounts stored in the project
accounting DB, so we have refactored live accounting to record segment size
Change-Id: Ie48bfdef453428fcdc180b2d781a69d58fd927fb
this commit introduces the reported_serials table. its purpose is
to allow for blind writes into it as nodes report in so that we have
minimal contention. in order to continue to accurately account for
used bandwidth, though, we cannot immediately add the settled amount.
if we did, we would have to give up on blind writes.
the table's primary key is structured precisely so that we can quickly
find expired orders and so that we maximally benefit from rocksdb
path prefix compression. we do this by rounding the expires at time
forward to the next day, effectively giving us storagenode petnames
for free. and since there's no secondary index or foreign key
constraints, this design should use significantly less space than
the current used_serials table while also reducing contention.
after inserting the orders into the table, we have a chore that
periodically consumes all of the expired orders in it and inserts
them into the existing rollups tables. this is as if we changed
the nodes to report as the order expired rather than as soon as
possible, so the belief in correctness of the refactor is higher.
since we are able to process large batches of orders (typically
a day's worth), we can use the code to maximally batch inserts into
the rollup tables to make inserts as friendly as possible to
cockroach.
Change-Id: I25d609ca2679b8331979184f16c6d46d4f74c1a6
everyone was importing it as dbx anyway. why should it be
named satellitedb? so yeah just pass the "-p dbx" flag.
Change-Id: I5efa669f4f00f196b38a9acd0d402009475a936f
Create a service for deleting pieces of storage nodes.
Currently the DeletePieces method returns after a success threshold,
completion or a timeout.
The end goal is to return when reaching the success threshold and
leaving the remaining goroutines running after DeletePieces method
returns and add a life cycle to the service that it waits for them when
it closes.
This is the first commit for ticket:
https://storjlabs.atlassian.net/browse/V3-3476
Change-Id: If740bbf57c741f880449980b8176b036dd956c7b
This reverts commit 8e242cd012.
Revert because lib/pq has known issues with context cancellation.
These issues need to be resolved before these changes can be merged.
Change-Id: I160af51dbc2d67c5449aafa406a403e5367bb555
this will allow for some nice runtime analysis down the road.
also, this allows for wrapping database handles in a way that
can interact with these contexts
requires https://review.dev.storj.io/c/storj/dbx/+/514
Change-Id: Ib087b7cd73296dd2c1e0331314da34d861f61d2b
this allows for setting $STORJ_METAINFO_POSTGRESQL_USE_ALT=yes if you
want to use the cockroachkv implementation for metainfo against postgres
Change-Id: I0c9458c83fd67ee63ef4a78351e64a80a0647408
the hope is that it is mostly interfering with itself, so this
will make it not do that (well, N api servers, but hopefully
that's not enough to cause it to have issues).
Change-Id: Ifd0c9e6617457785ab25fe5b714d8556cdc8e2d3
When an uplink requests an upload or download from the satellite we are trackig the
allocated bandwidth twice. The value in bucket_bandwidth_rollups is used
for project limits but the value in storagenode_bandwidth_rollups is not
used at all. We can increase the performance by removing it. Uplinks
will get a faster response from the satellite.
Change-Id: Icccd41f94107ef34668f30f99bf5f728c384b07e
any database error doesn't mean the order wasn't found. for example
in cockroach it may say that the transaction is aborted. then what?
maybe we get big old row level deadlocks like we've observed? so
instead explicitly check for ErrNoRows to reject the order and bail
out otherwise. the surrounding logic will give it a retry.
Change-Id: I6e1f8f6e6a6def3e45b44f5088cbdc158e1098e4
Add a back-pressure mechanism to the satellite metainfo
DeleteObjectPieces method for returning once the 75% of successful
deleted pieces is reached.
Change-Id: Ia38df49fba5838f0605c40a77cfff8e3442cb5b0
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb
Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
The DeleteObjectPieces should print out the warning on closing the
connections only if there was an error.
Change-Id: If3d7ab256d8508c08388c1f22c7dd1eb819d2509
The DeleteObjectPieces must close the storage node client once it has
finished deleting its pieces.
Change-Id: I08eb8af8e4215d77d59b52f5055211b918374ab4
turns out portable sed is hard: it has to work with both
linux and bsd sed, etc. instead, use a really really basic
bash script and a temporary file. this should be much less
likely to cause issues on a wide range of machines.
Change-Id: Ia759789fb52aa1ee3361426bb6c02ed4eac3d23a
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
I also fleshed out consoledb_test.go to do actual inserts and gets to
make sure things were working correctly.
Change-Id: I089bf4c776d15dc8578080e26760bd6dff4beec9
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: I22b850ce5859fa07d13bf475be5140e6bde95b8a
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The WithTx
helper functions in dbutil and dbx do that automatically. I am changing
this code to use those helpers instead.
Change-Id: Iaf492af35471931125f2b7365aa4338f44154881
DeleteObjectPieces must not call overlay cache KnownReliable method with
an empty list of node IDs for avoiding to log a useless noisy warning.
Change-Id: Ibe2a34f2913f003d3ba020f9764c1369fa63123b
Move tests for old Metainfo API to separate file. Metainfo tests file is
large enough and in future it will be easier to remove old tests.
Change-Id: I9421907ef015a6dfa65f4de6ef01b2d2c8baa7df
Use the helper function IsRPC of the err2 package rather than checking
if an error is of a specific RPC status code with an 'if' conditional.
Change-Id: Ibe89d6c2d836307c3112a6d7cc6bf95f0f985fd2
Disqualifies a node when the node fails to complete a graceful
exit.
Adds a new DisqualifyNode method to the overlay cache, since there
wasn't an existing method to disqualify a node but do nothing else
to its stats.
Adds checks to existing tests to make sure that a storage node that
fails a graceful exit is marked as disqualified in the overlay
cache.
https: //storjlabs.atlassian.net/browse/V3-3342
Change-Id: I4d554a519ab59db31ad3b8e28764c8683a6e3888
crdb.ExecuteTx is great, but I don't think it will work right with
PostgreSQL. It works by way of cockroach savepoints, which allows
it to react to retryable errors, whereas tx.Commit() doesn't. But
I don't think PostgreSQL savepoints work exactly the same way. I'm not
100% sure, but it doesn't seem worth the risk.
So, I'm switching one case here to use the new dbutil.WithTx instead,
which will use crdb.ExecuteTx if appropriate. The other case doesn't
need a transaction at all.
Change-Id: I39283f3b5d8d47596db7aff5048bb74597e5918f
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: I660540885a0784fae844cf99376d1537e208fa69
overlay.GetOfflineNodesLimited
We only care about node ID, address, and last contact success/failure
from the downtime service, so the overlay should only return these
values for the downtime-specific queries.
Change-Id: I08a6ecfdd2a12b82cae62e87d6adeab53975bfce
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: Icd3da71448a84c582c6afdc6b52d1f345fe9469f
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: Ibaadd2c8540ba5c8cccd6ecbf529017ab98b78ca
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: Id24906f5f3ae83245dabb218e1f70e0bcb3b417a
Remove starting up messages from peers. We expect all of them to start,
if they don't, then they should return an error why they don't start.
The only informative message is when a service is disabled.
When doing initial database setup then each migration step isn't
informative, hence print only a single line with the final version.
Also use shorter log scopes.
Change-Id: Ic8b61411df2eeae2a36d600a0c2fbc97a84a5b93
When the context was being cancelled the error was being discarded within the rate limiting error handling which caused tests to fail.
Change-Id: I5c6458c16da09a11531233ea0ee80d914969cb3f
deletePointer must return an ErrObjectNotFound rather than a rpc status
error NotFound because the callers must distinguish such error if it
comes from the getPointer or from the UnsynchronizedDelete.
Change-Id: I68b4e45a2765e63b73bf85c2c39a5fc0198373f6
We don't want slowloris nodes to be able to indefinitely block
up the satellite, so add a timeout. Some monitoring inspection
showed the largest success times being on the order of 30s, so
a 1min timeout should be sufficient to kill the misbehaving nodes.
Change-Id: I5e2c3480a15f6304e37262d0a4d30d07eae99bb3
As per discussed we decided to rate limit how fast we iterate through
the metainfo database in the metainfo loop. This puts in place a
mechanism for rate limiting and burst limiting if need be in the future.
The default for this rate limiting is still no limits so it stays the
same as our previous functionality.
Change-Id: I950f7192962b0e49f082d2c4284e2d52b0a925c7
We are missing some tests for new Metainfo API that we have for old API.
This is first change to adjust old tests to new API.
Change-Id: Ie2b16bf85de8633662f952e863dbf3d409d801d9
For improving the deletion performance we are shifting the
responsibility to delete the pieces of the object from Uplink to the
Satellite.
BeginDeleteObject was the first call to return the stream ID which was
used for after retrieving the list of segments and then get addressed
order limits for deleting the pieces (of each segment) from the storage
nodes.
Now we want the Satellite deletes the pieces of all the object segments
from the storage nodes hence we don't need anymore to have several
network round trips between the Uplink and the Satellite because the
Satellite can delete all of them in the initial BegingDeleteObject
request.
satellite/metainfo.ListSegments has been changed to return 0 items if
the pointer of the last segment of an object is not found because we
need to preserve the backward compatibility with Uplinks that won't be
updated to the last release and they rely on listing the segments after
calling BeginDeleteObject for retrieving the addressed order limits
to contact the storage nodes to delete the pieces.
Change-Id: I5f99ecf27d62d65b0a062936b9b17581ef692af0
Remove direct dependency on uplink.RSConfig, this simplifies
moving the config file without introducing weird dependencies.
Change-Id: I7fd2a145401e0205d7047631df9d2810241efeec
Adds check to see if storage nodes are eligible to initiate
graceful exit, by checking their CreatedAt date and seeing if
their "age" is greater than the new config value:
NodeMinAgeInMonths
The default for this value is 6 months for now.
https://storjlabs.atlassian.net/browse/V3-3357
Change-Id: Ib807ab8987ddb5a38a27a83886490f73fe8c5816
The endpoint listSegmentsManually method misses a check for the limit
parameter, otherwise it can return inconsistent results when it's 0 or
negative.
When 0 or negative, without the check, it returns no segments but also
that there isn't more segments and that isn't correct.
The function is only called from the Endpoint.ListSegments method and
the function cares to ensure that limit is always greater than 0, but if
the method doesn't check that a new future caller could misuse it and
provoke a bug.
Additionally:
* Documentation for the modified function has been written
* The part of the function that repeated the logic of the
Endpoint.getPointer method has been removed for using that method.
* Added logging before returning an internal error in
Endpoint.getPointer.
Change-Id: I5c4f0db2292da0162db6b7d63553895808d0925a
Do some cleanup for adding new identified TODOs (associated with ticket
https://storjlabs.atlassian.net/browse/V3-3406) and remove an old one.
Change-Id: I5d20dbe1c4dee0a8279e08b05b907f4cc9dba278
In satellite/accounting/rollup Service.RollupStorage we have a few
potential error scenarios that return time.Now(). Especially in the case
where we exit early because we have received 0 tallies since the *last*
rollup, this creates a potential race condition.
Between the time we call GetTalliesSince and realize it is empty, it's
possible a tally was inserted in that interval. As currently written we
are returning a latestTally time that excludes that tally.
We are currently protected because in Service.Rollup we don't save the
rollup unless we have populated the rollupStats. However, this change is
more correct and future-proof, because Service.RollupStorage should
always return a correct latestTally time, which in case of errors and
empty tallies, is the last successful tally.
Change-Id: I2521a2cc9802c8f06e512dde4422803a272e2a0a
Adds the KnownReliable method to Overlay Service that filters all nodes
from the given list to be only reliable nodes (online and qualified).
The method return []*pb.Node of reliable nodes. The pb.Node values are
ready for dialing.
The first use case is when deleting an object to efficiently dial all
reliable nodes holding a piece of that object and send them a delete
request.
Change-Id: I13e0a8666f3807c5c31ef1a1087476018a5d3acb
Fixes a data race caused by not waiting for workers to finish
before shutting down. Currently this ended up failing logging
because it was closed when test tried to write to it.
Change-Id: I074045cd83bbf49e658f51353aa7901e9a5d074b
this will allow us to inspect the type of `db.Driver()` on *sql.DB
connections to correctly differentiate between pg and crdb conns.
as a bonus, this moves all concerns about when to replace "cockroach://"
with "postgres://" out of view, letting the thin shim "driver" take care
of that.
Change-Id: Ib24103ab7c508231e681f89a7321b623e4e125e9
Backstory: I needed a better way to pass around information about the
underlying driver and implementation to all the various db-using things
in satellitedb (at least until some new "cockroach driver" support makes
it to DBX). After hitting a few dead ends, I decided I wanted to have a
type that could act like a *dbx.DB but which would also carry
information about the implementation, etc. Then I could pass around that
type to all the things in satellitedb that previously wanted *dbx.DB.
But then I realized that *satellitedb.DB was, essentially, exactly that
already.
One thing that might have kept *satellitedb.DB from being directly
usable was that embedding a *dbx.DB inside it would make a lot of dbx
methods publicly available on a *satellitedb.DB instance that previously
were nicely encapsulated and hidden. But after a quick look, I realized
that _nothing_ outside of satellite/satellitedb even needs to use
satellitedb.DB at all. It didn't even need to be exported, except for
some trivially-replaceable code in migrate_postgres_test.go. And once
I made it unexported, any concerns about exposing new methods on it were
entirely moot.
So I have here changed the exported *satellitedb.DB type into the
unexported *satellitedb.satelliteDB type, and I have changed all the
places here that wanted raw dbx.DB handles to use this new type instead.
Now they can just take a gander at the implementation member on it and
know all they need to know about the underlying database.
This will make it possible for some other pending code here to
differentiate between postgres and cockroach backends.
Change-Id: I27af99f8ae23b50782333da5277b553b34634edc
* Use unexported existent method in logic that was duplicated in some
exported methods.
* Log a forgotten internal error.
* Improve the documentation adding more and fixing some to fit to our
code style conventions.
Change-Id: Ie6f8bc59f9089f92b8b0d1b4c09c2142c3f273f5
The Endpoint.getPointer method lacked of tracing.
Also add a dot at the end of documentation comment for following our
code style conventions.
Change-Id: I9b63ad297f04e31825648aae43aa8f9ebba2b4e2
Return an error when misusing the endpoint method
'listSegmentsFromNumberOfSegments' because there is the method
'listSegmentsManually' for being used when the number of segments is
less or equal than 0.
If we don't return an error on `listSegmentsFromNumberOfSegments` we
would realize that we have a bug much more later than returning an error
because the clients wouldn't receive an error and would receive an empty
list, making them to wonder what they are doing wrong to receive 0
results before they realize that they could be in front of a bug.
This commit also renames the function to be plural as "numberOfSegments"
parameter and the test function which missed also the end 's'.
Change-Id: I02318685bf36aa3af26545731a1711621a5e2e39
planet.Start starts a testplanet system, whereas planet.Run starts a testplanet
and runs a test against it with each DB backend (cockroach compat).
Change-Id: I39c9da26d9619ee69a2b718d24ab00271f9e9bc2
for storj-sim to work, we need to avoid schemas in cockroach urls
so we have storj-sim create namespaced databases instead of schemas
and we have the migrate command create the database in the same way
that it would create a schema for postgres. then it works!
a follow up commit will move the creation of the database/schemas
into storj-sim's setup step so that we can avoid doing these icky
creations during normal migration calls. it will also make the
pointerdb have an explicit call to migrate instead of just doing
it every time it's opened.
Change-Id: If69ef5cb96b6866b0438c761bd445afb3597ae5f
satellitedb migration tests ran against multiple base versions, however after the merging all the steps the base versions didn't exists anymore - which meant none of the migration tests were actually running.
Fix a documentation comment for one method and apply our code
conventions to some that I stumbled.
Change-Id: I3baf5d004a128dcd561c3e27c080aab345c64461
first, so that they all work the same way, because it's getting
complicated, and second, so that we can do the appropriate thing
instead of CREATE SCHEMA for cockroachdb.
Change-Id: I27fbaeeb6223a3e06d97bcf692a2d014b31465f7
it doesn't necessarily _have_ to be UTC; the time is correct as returned
either way, but this will make it a little less prone to variance.
also, there is a test that depends on the time being returned in UTC.
Change-Id: Ia71e24ecd9973ba70a1cfb5621a3030a5c82d004
Improve the piece hash validation filtering out a piece when an order
limit is not found for it.
The commit also improves the documentation of an internal metainfo
method and rename the parameters of 2 methods for clarifying what they
are.
This will make it so we don't need to comment out those lines every time
we want to enable the cockroachdb tests during development.
Once it's ready this flag can go away.
* update migration steps, add crdb support to testplanet
* add crdb support
* have jenkins run a bares bones crdb compat test
* skip crdb tests
* skip crdb tests
* fix root_piece_id column
* write crdb store to tmp dir
* escape
* satellite/console: Add X-Frame-Options and Referrer-Policy security headers
* Update to use CSP instead of XFO and include tardigrade.io
* Make FrameAncestors a config option
* Update satellite-config lock
* Make help text for FrameAncestors better
* satellite/metainfo: Rollback path parts check in loop
We have to rollback the changes applied in checking the rawPath parts
from 4 to 3 because the production prointerDB is still storing buckets.
* satellite/metainfo: Don't return path parts less 4
Don't return an error in the metainfo loop iterator when a path doesn't
have 4 parts because it belongs to bucket metadata, not an actual
object.
* merge migration
* rm migration versions
* rm unneeded migration test data
* create index w/postgres + crdb compatible syntax
* add default to offers.invitee_credit_duration_days
* changes so that schema matches from master to branch
* change to be crdb compatible
* add check to confirm db version
* mv version check to migration
* update tests
* add minversion to sadb migration, update tests
* confirm min version for all dbs in a migration
* add validate migration to sadb
* fix lint err
* rm min version check from migrate
* change sadb check
* hard code min db version
* fix comment
* skip unknown errors (wip)
* add tests to make sure nodes that time out are added to containment
* add bad blobs store
* call "Skipped" "Unknown"
* add tests to ensure unknown errors do not trigger containment
* add monkit stats to lockfile
* typo
* add periods to end of bad blobs comments
* satellite/nodeselection: dont select nodes that havent checked in for a while
* change testplanet online window to one minute
* remove satellite reconfigure online window = 0 in repair tests
* pass timestamp into UpdateCheckIn
* change timestamp to timestamptz
* edit tests to set last_contact_success to 4 hours ago
* fix syntax error
* remove check for last_contact_success > last_contact_failure in IsOnline
Large conditional blocks are hard to read.
When the conditional block only has one branch it's easy to understand
the logic of the function to early return switching the condition.
We don't use reverse listing in any of our code, outside of tests, and
it is only exposed through libuplink in the
lib/uplink.(*Project).ListBuckets() API. We also don't know of any users
who might have a need for reverse listing through ListBuckets().
Since one of our prospective pointerdb backends can not support
backwards iteration, and because of the above considerations, we are
going to remove the reverse listing feature.
Change-Id: I8d2a1f33d01ee70b79918d584b8c671f57eef2a0
* during audit Verify, return error and delete segment if segment is expired
* delete "main" reverify segment and return error if expired
* delete contained nodes and pointers when pointers to audit are expired
* update testplanet.Upload and testplanet.UploadWithConfig to use an expiration time of an hour from now
* Revert "update testplanet.Upload and testplanet.UploadWithConfig to use an expiration time of an hour from now"
This reverts commit e9066151cf84afbff0929a6007e641711a56b6e5.
* do not count ExpirationDate=time.Time{} as expired
* If a node claims to fail a transfer due to piece not found, remove that node from the pointer, delete the transfer queue item.
* If the pointer is piece hash verified, penalize the node. Otherwise, do not penalize the node.
* change satellite.Peer name to Core
* change to Core in testplanet
* missed a few places
* keep shared stuff in peer.go to stay consistent with storj/docs
* separate sadb migration, add version check
* update checkversion to do same validation as migration
* changes per CR
* add sa migration to storj-sim
* add different debug port in storj-sim for migration
* add wait for exit for storj-sim migration
* update sa docker entrypoint to support migration
* storj-sim satellite parts all wait for migration
* upgrade golang-migrate/migrate to v4 because bug
* fix go mod tidy
