Trace all the requests that the HTTP API endpoints receive.
We want to trace them with Monkit because we want to break them down by
request type and response code for seeing if they succeeded or failed.
Also log them with DEBUG level with the IP client.
Change-Id: Ia7b013351c788f131e775818f27091f3014ea861
We retry a GET_REPAIR operation in one case, and one case only (as far
as I can determine): when we are trying to connect to a node using its
last known working IP and port combination rather than its supplied
hostname, and we think the operation failed the first time because of a
Dial failure.
However, logs collected from storage node operators along with logs
collected from satellites are strongly indicating that we are retrying
GET_REPAIR operations in some cases even when we succeeded in connecting
to the node the first time. This results in the node complaining loudly
about being given a duplicate order limit (as it should), whereupon the
satellite counts that as an unknown error and potentially penalizes the
node.
See discussion at
https://forum.storj.io/t/get-repair-error-used-serial-already-exists-in-store/17922/36
.
Investigation into this problem has revealed that
`!piecestore.CloseError.Has(err)` may not be the best way of determining
whether a problem occurred during Dial. In fact, it is probably
downright Wrong. Handling of errors on a stream is somewhat complicated,
but it would appear that there are several paths by which an RPC error
originating on the remote side might show up during the Close() call,
and would thus be labeled as a "CloseError".
This change creates a new error class, repairer.ErrDialFailed, with
which we will now wrap errors that _really definitely_ occurred during
a Dial call. We will use this class to determine whether or not to retry
a GET_REPAIR operation. The error will still also be wrapped with
whatever wrapper classes it used to be wrapped with, so the potential
for breakage here should be minimal.
Refs: https://github.com/storj/storj/issues/4687
Change-Id: Ifdd3deadc8258f34cf3fbc42aff393fa545794eb
Added new email html template.
It is sent when user tries to reset password with unknown or unverified account.
Made a couple of minor config changes.
Issue: https://github.com/storj/storj/issues/4913
Change-Id: I730f48b3478e302d1e38e1f8a27c75f66a8ba6fd
Some nodes were added to the nodes table due to a bug in quic
based storagenode contact code. This is a tool to clean up these nodes.
Delete with batch-size 1k seems to take ~400ms on local CockroachDB.
Change-Id: Ic0c1180528c27952e19c431fc9cc327292a10a5f
Add payments method to payments to DepositWallets interface.
Exposes payments retrieval API for a particular wallet to
other systems such as console billing API.
Change-Id: Ifcb3a35514aab50be00f6360007954980b5d8b38
Use DownloadSelectionCache to avoid querying database for every
download.
This change only addresses downloads from users. The download selection
cache is not currently used for audit and repair.
Change-Id: I96a49e121dac0b4204f97592a63131edabd73fb5
Adding go.mod into node_modules is not sufficient, because npm install
wipes them quite often out. Similarly, when running npm install locally
it will remove it, causing the git state to be dirty.
Rather than having them committed, add them after running npm install.
Change-Id: Iaf21a9c6e198dc31fe50345ec5dee85b44617176
This just cleanup change to unblock libuplink to reorganize types
which are aliases to storj types.
Change-Id: Id3edf13f1b0aef52d7606d545aa7a6594cf8d13f
Add go.mod to node_modules folder, that way Go compiler doesn't
need to scan the node_module directories for any Go code.
Change-Id: I747909416490c847d6b4bfa3438fea66660fcd53
It seems the tests relied on time.Now(), which might cause some
discrepancies in calculations. Use a fixed time.Now() rather than
recalculating.
As a sidefix, remove "Test" prefix from t.Run. These are unnecessary.
Change-Id: I1de903fcf0fcf46fc8e3acf2463e17239b8e3cc6
The MinDownloadTimeout 950ms and delay of 1s were quiet close, possibly
causing flaky behavior in TestVerifierSlowDownload.
Change-Id: I4f6c1554a118b21427357642abe39986fd0af38d
Classify errors related to invalid tokens for activating user accounts
for returning 400 status code rather than 500 status code.
Don't log all the errors with "error" level, only the ones related to
internal server errors and the rest log them with "debug" level because
they pollute the production satellite errors with errors that are
misguiding.
Change-Id: Id2bd737edba8550ce08965b51b8bf2540bd13ca4
Previously copying an object to it's ancestor location (copy of copy)
broke the object and all copies.
This fixes this by calling the existing delete method rather than a
custom one when there is an existing object at the copy destination.
The check for existing object at destination has been moved to an
earlier point in FinishCopy.
metabase.DeleteObject exposes a transaction parameter so that it can be
reused within metabase.
Closes https://github.com/storj/storj/issues/4707
Uplink test at https://review.dev.storj.io/c/storj/uplink/+/7557
Change-Id: I418fc3337fa9f30146ccc1db456af168ae41c326
- instead of closing over the outer err variable, potentially
overwriting some errors or something, declare local variables.
- double check that we got the number of rows we expected to get
and error otherwise. this prevents a possible source of inserting
bogus rows into the database.
Change-Id: I30662be2727afe0a90e4215a182fedc2648d1169
Part of the delete query cause a full table scan of segment_copies. This
slowed down the system. This change should have the same semantics but
improved performance.
Part of https://github.com/storj/storj/issues/4898
Change-Id: I4afe23df05467eafc9c91591f47a7251a0f3dd31
Read the source object and write the destination object in the same
transaction, to prevent breaking the object because it was deleted
simultaneously.
This is probably the root cause of the metainfo loop halting from
2022-06-21 onwards, where 2 objects lost their root_piece_id during
copying.
Part of https://github.com/storj/storj/issues/4930
Change-Id: I9c45d56a7bfb48ecd5f4906ee1cca42922901e90
Returns only user's own projects when we hit GET user endpoint.
Fix for this issue
https://github.com/storj/storj/issues/4820
Change-Id: I546268fa3e5983a72f11f998803da5455c0035b4
Satellite caches the project bandwidth in Redis when it doesn't have it
because was not set or the key expired, however, it doesn't perform the
check and set if not exists in a transaction. It also uses the increase
function which increases the value if it exists otherwise it sets it.
This provokes that multiple concurrent request to the same project may
increase the total project by multiples of the bandwidth usage
registered in the database rather than setting it because they may check
if the key exists before any other has executed the increase and then
the first one executing it will set the value but the others will
increased causing that Redis has a wrong bandwidth usage value which is
N magnitude of the real one and making the satellite to deny the
downloading if it surpasses the project limit.
This commit changes the "update"" project bandwidth usage by an "insert"
but using a Redis function that only sets the value if the key doesn't
exists for solving the increase issue but also not overriding the value
due to may contain updates of other downloading requests which aren't
already registered in the DB.
Change-Id: I33e2fe462930b2fdb4061fc94002bd3544476f94
This test had an effective config.Reputation.AuditCount = 0, meaning all
nodes that had _any_ positive audit results were considered vetted.
Because of that, only one node in the test setup was "new". And that
node was marked as being in GE, so could not be returned by node
selection.
The reason the tests still worked is because of the node selection rule
that says "if there are no new nodes at all, just get all reputable
nodes to satisfy the request".
This commit makes it so half of the nodes are vetted and half new, which
makes the test somewhat more interesting (and means we aren't
concentrating too much on testing details of behavior when AuditCount is
0).
Change-Id: I09157b7dc20ecaddd2a6e60cfe146e9186e3603b
This change fixes the issue where the API generator would produce
different Go code for the same API definition upon each invocation
due to the random nature of map iteration.
Change-Id: I6770a10faf06311c24f541611c25d0b2b0f8e521
To avoid regression with old versions of uplink objects move we need to
remove FinishMoveObject check for key and nonce, in SQL
in FinishMoveObject do check if metadata is nil then
don't set key and nonce. The same UPDATE clause should return metadata and
if metadata != nil we should do the same validation for key and nonce
to avoid putting broken key and nonce while doing move
Resolves: https://github.com/storj/team-metainfo/issues/108
Change-Id: If723dfad899e9235f53559b71ee1c7fe49deb8b8
The users.Update method in the satellitedb package takes a console.User
as an argument. It reads some of the fields on this struct and assigns
the value to dbx.User_Update_Fields. However, you cannot optionally
update only some of the fields. They all will always be updated. This means
that if you only want to update FullName, you still need to read the
user info from the DB to avoid updating the rest of the fields to zero.
This is not good because concurrent updates can overwrite each other.
This change introduces a new struct type, UpdateUserRequest, which
contains pointers for all the fields that are updated by satellite db
users.Update. Now the update method will check if a field is nil before
assigning the value to be updated in the db, so you only need to set the
field you want updated. For nullable columns, the respective field is a
double pointer. This allows us to update a column to NULL if the outer
pointer is not nil, but the inner pointer is.
Change-Id: I27f842d283c2711e24d51dcab622e57eeb9157f1
This change integrates the session management database functionality
with the web application. Claim-based authentication has been removed
in favor of session token-based authentication.
Change-Id: I62a4f5354a3ed8ca80272814aad2448f901eab1b
This change swaps net.IP.IsPrivateIP usages with custom isPrivateIP to
unbreak the build as we want to build for earlier than Go 1.17.
Change-Id: I44badbb487f35e43b8b0433ad0f3b9c87af718d4
There are multiple entries in the users table with the same email
address. This is because in the past users were able to register
multiple times if the email was not verified. This is no longer
the case. If a user tries to register with an unverified email
already in the DB, we send a verification email instead of
creating another entry. However, since these old entries in the
table with duplicate emails were never cleaned up, the email
reminder chore will send out email verification reminders to them.
A single person will get one separate email per entry in the DB
with their email and where status = 0.
Since the multiple entries with the same email problem was solved
a while ago, just add a constraint to GetUnverifiedNeedingReminder
to only select users created after a cutoff. Once the DB is
migrated to remove the duplicate emails, we can remove the cutoff.
github issue: https://github.com/storj/storj/issues/4853
Change-Id: I07d77d43109bcacc8909df61d4fb49165a99527c
TestRollupNoDeletes is very flaky (passes locally but fails in the main branch build).
The exact reason is not clear, but stopping the loop seems to be async, the following lines may not stop the loops immediatelly which is a potential problem:
```
satellitePeer.Accounting.Rollup.Loop.Pause()
satellitePeer.Accounting.Tally.Loop.Pause()
```
Fortunatelly these test check only the database interfaces. Instead of testplanet.Run we can run only satellitedbtest.Run which is faster and more predictable (no background loops).
Other potential problem: comment claims that the default of DeleteTallies is false:
```
// In testplanet the setting config.Rollup.DeleteTallies defaults to false.
```
But it seems to be true (rollup.go):
```
DeleteTallies bool `help:"option for deleting tallies after they are rolled up" default:"true"`
```
This is also fixed in the patch (as we need set it explicit), but TBH it can be fixed with testplanet, too.
Change-Id: Id7ec80d5c069bed2c556f4d001c71aa23fc5af23
If project.UserAgent is set, use this for bucket.UserAgent on bucket
creation. Otherwise, set bucket attribution as before (getting UserAgent
from request headers).
Tests were updated to create the bucket with a different user, added as
a project member. Otherwise, the tests do not catch the bug.
Change-Id: I7ecf79a8eac5957eed361cbea94823190f58b776
The ApplyUpdates() method on the reputation.DB interface acts like the
similar Update() method, but can allow for applying the changes from
multiple audit events, instead of only one.
This will be necessary for the reputation write cache, which will batch
up changes to each node's reputation in order to flush them
periodically.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I44cc47767ea2d9423166bb8fed080c8a11182041
Implemented project delete endpoint for REST API.
Added project usage status check service method to indicate if project can be deleted.
Updated project invoice status check method to indicate if project can be deleted.
Change-Id: I57dc96efb072517144252001ab5405446c9cdeb4
prevent network enumeration by rejecting privateIPs in PingMe and
Checkin endpoints
Closesstorj/storj-private#32
Change-Id: I63f00483ff4128ebd5fa9b7b8da826a5706748c9
We don't have metric to track how many pending objects we have in the
system. This change is using tally objects loop to collect pending
objects per bucket and at the end its combining all buckets values
into single metric for all pending objects in a system.
Change-Id: Iac7a6bfb48854f7e70127d275ea8fdd60c4eb8b7
Add storjscan wallets implementation to the satellite. The wallets interface allows you to add and claim new wallets as called by the API. The storjscan specific implementation of this interface uses a wallets DB to associate the user to a wallet address, as well as a storjscan client to request and associate new wallets to the satellite.
Change-Id: I54081edb5545d4e3ee07cf1cce3d3e87cc00c4a1
Update all the NPM dependencies used by the Admin UI.
The dev dependencies correspond to the ones that are currently used by
an svelte app generated with the last svelte-kit version. They
deprecated some configuration options and changed some svelte
directives.
The only non-dev dependency is also updated to the last published.
Change-Id: I5f2192cab41e00efc3239237f8dc8f3d07816b63
script-src-elem is preferred over script-src in certain scenarios.
If it's absent, then the browser always uses script-src. By adding
script-src-elem it ended up blocking google recaptcha.
Change-Id: I9cf96e71e69054c4a034ca189db84fbe8903a59b
Updated daily project usage query to return correct allocated traffic.
If allocated egress has expired then we return settled egress.
If not then we return allocated egress - dead egress.
Fix for this issue
https://github.com/storj/storj/issues/4563
Change-Id: Ia15a50d3bb8d8cb1106936e17dbe0f1f5a40fa87
Fixed daily usage query returning single bucket usage.
We sum up bucket usages now.
Also fixed https://github.com/storj/storj/issues/4559.
Change-Id: I2eb6299f1ef500d68150879195011b6fbb5f37ed
TRUNCATE requires table recreation which involves 'online schema change' with crdb.
(with psql it might be fater than DROP, that was the motivation of the original change)
`online schema change` is an async operation with crdb and it's eventually very slow therefore we try to avoid it.
This·reverts·commit·15bed0ed0e81d54fe4ffac9928bdf648f5e06ec6.¬
Change-Id: I93e1ab470962be77e3458d74c8787442c9d7bee0
Add the admin API endpoint for disabling an user's multifacdtor
authentication to the satellite admin UI.
Remove a couple of commented code lines too.
Change-Id: Iaee7efe7a3d4d38bdd6541311447a9726806f0f1
We have a couple of support tickets so far that require us to
disable the mfa on accounts. Since we currently had no other
way than doing a SQL War Crime, it makes sense to add it to the
admin API.
Change-Id: Ib16735c1961380b04345a3495d4eebee5fa0bc41
Currently we have a bug in which we would require that a project of
a paid tier user needs to be two months unused before we can delete it.
This change fixes it and reduces it back to the normal next billing cycle.
Change-Id: I28610b6c45c68943fd4f2621233bccc06cab28a0
An older change plummed the full console config as subconfig of
the admin api configuration in. This bloated the generated satellite
configuration unnecessarily while also allow for confusion/mistakes.
Change-Id: Icf49cc1f147711e37e85f6eac1143fab8ddf1659
when deleting an object that has been copied multiple times, we look for an ancestor_stream_id by taking the min of all copies stream_id.
This change simplifies this process by picking any stream_id as a new ancestor by using 'distinct on'.
Fixes https://github.com/storj/storj/issues/4745
Change-Id: Iffb519b82d2ae2ed73af48fa0e86f87384e0158f
Add billing DB to the satellite. This DB will hold all transactions on the users account and can be used to compute the users current usable account balance.
Change-Id: I056416efc169e5e5e30c9f30cd8bc766b7bc8073
Implemented new service method for generating API keys.
Implemented new endpoint.
Improved multiple endpoint groups handling.
Change-Id: Iba26fbf9123707b5b4c2d5e8c5a35d507404f24a
We are not using this method and most probably we
won't need to list objects with all statuses at once.
Removing for now.
Change-Id: I7aa0468c5f635ee2fb1fe51db382595c6343dd9c
- parallel deletion of 50 objects and their 50 copies (one copy per object)
This test is skipped because it's creating deadlocks that are not automatically retried on postgres
- parallel deletion of 1 object and its 50 copies.
Fixes https://github.com/storj/storj/issues/4745
Change-Id: Id7a28251c06bb12b5edcc88721f60bf7a4bc0492
testplanet executes cockroach and postgress tests parallel, therefore using http.DefaultClient is safe only as long as we don't modify it.
TestActivationRouting modifies it (client.CheckRedirect=...), therefore it should use a local version instead of the default one.
Problem reported by a jenkins build:
```
==================
WARNING: DATA RACE
Write at 0x000003486af0 by goroutine 143:
storj.io/storj/satellite/console/consoleweb_test.TestActivationRouting.func1()
/home/jenkins/workspace/storj-testing-experiments/satellite/console/consoleweb/server_test.go:66 +0x378
storj.io/storj/private/testplanet.Run.func1.1()
...
Previous read at 0x000003486af0 by goroutine 104:
net/http.(*Client).checkRedirect()
/usr/local/go/src/net/http/client.go:494 +0xd73
net/http.(*Client).do()
/usr/local/go/src/net/http/client.go:691 +0xd31
net/http.(*Client).Do()
/usr/local/go/src/net/http/client.go:593 +0x204
storj.io/storj/satellite/console/consoleweb_test.TestActivationRouting.func1.1()
/home/jenkins/workspace/storj-testing-experiments/satellite/console/consoleweb/server_test.go:48 +0x1e5
storj.io/storj/satellite/console/consoleweb_test.TestActivationRouting.func1()
/home/jenkins/workspace/storj-testing-experiments/satellite/console/consoleweb/server_test.go:74 +0x49d
storj.io/storj/private/testplanet.Run.func1.1()
...
```
Change-Id: I73319a5a593e067b906ec1fda70a44ca1e5a49a2
This has been a cause of some confusion, even though the fields are
labeled as being copies of config values.
Having them be under a field explicitly named "Config" makes this
clearer, plus, allows the values to be passed in simply as a copy
of the Config struct from the satellite, rather than copying the fields
individually (which can be error-prone, particularly as the AuditCount
field in UpdateRequest is apparently not the same thing as the
AuditCount field in reputation.Config).
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I386953347b71068596618616934aa28e3245cdc1
Add storjscan wallets DB to the satellite. For now this DB is a one to one mapping of the users account to a storjscan wallet that can be used by the account holder to make payments on their Storj account.
relates to https://github.com/storj/storj/issues/4347
Change-Id: I6e65b15817b90ceb75641244f9bf173c3b4228a7
The two protobuf types are identical except that one is in our common/pb
package, and the other is in internalpb. Since the type is public
already, and there is no difference in the internal one, it seems better
to use the public one for all satellite needs.
There is also another type which is essentially identical, but which is
not a protobuf type, also called "AuditHistory". It looks like we don't
ever actually need to have a separate type from the protobuf one.
This change makes us use "storj/common/pb".AuditHistory for all of our
AuditHistory needs.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: If845fde21bb31c801db6d67ffc9a146d1617b991
logo redirects to homepage on login, signup, forgot password, reset
password, and activate account pages
Change-Id: I992aeae197004d620addd8d515cae1c1ca80a778
Tests are intermittently fail with similar error:
```
--- FAIL: TestDeletePendingObject/Cockroach (15.85s)
test.go:380:
Error Trace: test.go:380
delete_test.go:221
Error: Should be zero, but was metabase.DeleteObjectResult{
Objects: []metabase.Object{
{
ObjectStream: {ProjectID: {0x0f, 0x40, 0x70, 0x41, ...}, BucketName: "txxywyg4", ObjectKey: "\xbb+$\x17\x80\xc6\xcaC\xa3\xdb\xc3z*\xa8\xbe\xaf", Version: 1, ...},
- CreatedAt: s"2022-05-20 14:40:15.995376773 +0200 CEST",
+ CreatedAt: s"2022-05-20 14:40:21.04949 +0200 CEST",
ExpiresAt: nil,
Status: 1,
... // 9 identical fields
},
},
Segments: {{RootPieceID: {0x01, 0x00, 0x00, 0x00, ...}, Pieces: {{...}}}, {RootPieceID: {0x01, 0x00, 0x00, 0x00, ...}, Pieces: {{...}}}},
}
Test: TestDeletePendingObject/Cockroach/with_segments
--- FAIL: TestDeletePendingObject/Cockroach/with_segments (0.68s)
```
Looks like we shouldn't have an assumption that all tests can be finished in 5 seconds, especially not in highly parallel environment.
These tests use `time.Now` at the beginning and compare the time saved in the database (usually filled by the database).
The difference shouldn't be higher than 20 seconds (before this commit: 5 seconds) which assumes that the records are saved in this timeframe...
Change-Id: Ia6f52897d13f88c6857c05d728bf8e72ab863c9b
old bucket creation flow removed
new flow added
name and passphrase splitted into separate views
demo bucket will not be created automatically
bucket creation progress bar added
Change-Id: I2a1d7d77c3038caaafb3c06bdb0ac5dd1ad17599
This functionality will be needed in both packages, so here we move it
into the more general reputation-code package and export it for use in
satellitedb.
This also removes the related UpdateAuditHistory() signature from the
reputation DB interface, since it doesn't have anything to do with the
db. It doesn't need to be a method, either.
Finally, this changes the test for addAudit to be a plain test function
instead of using testplanet.Run(). It didn't need a whole testplanet
setup or any databases.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I90f6a909e5404f03ad776b95cfa2f248308c57c1
Recently we applied this optimization to metrics observer and time
used by its method dropped from 12m to 3m for us1 (220m segments).
It looks that it make sense to apply the same code to all observers.
Change-Id: I05898aaacbd9bcdf21babc7be9955da1db57bdf2
If TestCommitInlineSegment tests are taking longer time
then zombieDeadline created at the beginning of test
can be too far in the past. Creating zombieDeadline for each case
should avoid flakines.
Change-Id: Ieb011e8e470f6f1c32cf9365c8ae819317de6738
Márton found out that DROP DATABASE is rather slow on CRDB, and it makes
a significant impact when running the whole testsuite. In sum of test
times it's ~2.5h compared to ~2h. And the end-to-end ~20m to ~16m.
This adds a new flag STORJ_TEST_COCKROACH_NODROP for enabling this
behavior in the CI environment.
Fixes https://github.com/storj/dev-enablement/issues/6
Change-Id: I5a6616c32dc6596a96ba3d203f409368307d7438
We can use PieceIDDeriver in all places where we are deriving id from
the same id multiple times. We have serveral such places: gc, segment
deletion, segment validation, order limit creation. Using it should
save some resources.
Change-Id: I24668d516c0f7cea4aec6470614067734149501d
This will let us update our reputation cache when writing through to the
db.
Since the information is already being fetched from the db and returned
to the application, the extra cpu load here should be minimal.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I2b8619f2c0d541893c7d3e7d33b1863b96775ebd
We want to remind unverified users to verify their emails:
once after 24 hours has passed and again after 5 days has passed.
Add mailservice.Service to satellite core because it is needed by the
chore for sending emails. To add the mailservice.Service to the core,
we create a helper function in satellite/peer.go to avoid duplicating
the code in both api.go and core.go. In addition to the chore, this
change adds methods to users.DB to get unverified users in need of
reminder.
Change-Id: I4e515bdf43f922788b4f965b2efb34fa32288bd1
modify tally to calculate how we need to update segments in the live accounting
cache with UpdateProjectSegmentUsage method. adjust accounting.ExceedsUploadLimits
to use only cache for segment validation, if cache returns 0 or key not found then
we shouldn't reject such project as its possible that we won't have this value before first object iteration
https://github.com/storj/storj/issues/4744
Change-Id: I32c22d7fb71236e354653ba8719e029fc71f04c7
We added nodes.disqualification_reason recently, but we didn't add a
corresponding column in the reputations table (despite having a
corresponding `disqualified` column there).
Without this change, the (very useful and informative) assignments to
updateFields.DisqualificationReason in reputations.go have no effect.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I77404902ca64b56aed72f1de76b303fe82b76aab
The existing versionCollector metrics can tell us how many times various
metainfo endpoints are called, but they don't tell us how many bytes a
client is transferring. We currently can't collect precise information
on this, but we can collect information on how much planned traffic is
requested via order limits.
The implementation as provided is intended to measure objects sizes
before erasure encoding is taken into account.
Change-Id: I2f1d2a7831630e8439ecf5342e933df259151792
