* uplink: Mark encryption key config field for setup
Set the "setup" property to the `EncryptionConfig.EncrptionKey` for
avoiding to save it in the configuration file.
This field is only meant for using in the command line parameters which
need to use a different encryption key than the one present in the key
file or use it when there is not set any encryption key file path.
* cmd/uplink: Setup non-interactive accept enc key
Change the uplink CLI setup command non-interactive to save the
encryption key into a file when it's passed through the flag
--enc.encryption-key
Previous to this change it wasn't possible to create an key file despite
of that the flag was provided, so it was useless on the setup command.
* cmd/uplink: Reuse logic to read pwd from terminal
Reuse the logic which is already implemented in the pkg/cfgstruct for
reading a password from the terminal on interactive mode, rather than
duplicating it in the setup command.
* cmd/gateway: Use encryption key file flags
The cmd/gateway was still using the `enc.key` configuration field which
doesn't exist anymore and its setup command wasn't using the
`enc.key-filepath` with combination of the `enc.encryption-key` for
generating a file with the encryption key.
This commit update the cmd/gateway appropriately and move to the uplink
package the function used by cmd/uplink to save the encryption key for
allowing to also be used by the cmd/gateway without duplicating the
logic.
* cmd/storj-sim: Adapt gateway config cmd changes
Adapt the cmd/storj-sim to correctly pass the parameters to the
cmd/gateway setup and run command.
* scripts: Don't pass the --enc.encryption-key flag
uplink configuration has changed to only support the
`--enc.encryption-key` flag for setup commands and consequently the
cmd/uplink and cmd/gateway don't accept this flag over other commands,
hence the test for the uplink had to be updated for no passing the
flag on the multiples calls that the test do to cmd/uplink.
* uplink: Remove func which aren't useful anymore
Remove the function which allows to user or load an encryption key
because it isn't needed anymore since the `--enc.encryption-key` flag is
only available for the setup command.
Consequently remove its usage from cmd/uplink and cmd/gateway, because
such flag will always be empty because in case that's passed Cobra will
return an error due to a "unknown flag".
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
* added scopelint and correcte issues found
* corrected scopelint issue
* made updates based on Ivan's suggestions
Most were around naming conventions
Some were false positives, but I kept them since the test.Run could eventually be changed to run in parallel, which could cause a bug
Others were false positives. Added // nolint: scopelint
* first round cleanup based on go-critic
* more issues resolved for ifelsechain and unlambda checks
* updated from master and gocritic found a new ifElseChain issue
* disable appendAssign. i reports false positives
* re-enabled go-critic appendAssign and disabled lint check at code line level
* fixed go-critic lint error
* fixed // nolint add gocritic specifically
* add aws s3 benchmark script
* add s3 benchmark tests
* rearrange so smaller diff, fix spelling
* add configurable uplink config for s3-benchmark
* make new bucket w/unique name for each s3 test
* changes per CR
* update uplink cmd args
* add uplod/download benchmark, add script to run benchmarks
* fix lint err
* changes per CR comments
* export env var for linux
* fix lint
* add byte count to bench test
Uplink CLI was returning an error when the `--config-dir` flag was
used with interactive `setup` command because the directory used for
storing the encryption key file was the default configuration directory
rather than the value set in the flag.
This changes make the setup process to use the same directory, than the
one informed by the `--config-dir` flag value, for storing encryption
key file.
On the other hand, the default value for the encryption key file path
which was set with the purpose of showing it in the help message has
been removed because the cfgstruct doesn't show it unless that the flag
is set to the Cobra root CMD, so it was useless.
Also show the absolute path where the encryption key file has been saved when
the interactive setup command ends satisfactorily as it's equally done
with the configuration file.
* uplink: Add a new flag to set the filepath of the file which is used for
saving the encryption key and rename the one that hold the encryption key and
establish that it has priority over the key stored in the file to make the
configuration usable without having a huge refactoring in test-sim.
* cmd/uplink: Adapt the setup subcommand for storing the user input key to a file
and adapt the rest of the subcommands for reading the key from the key-file when
the key isn't explicitly set with a command line flag.
* cmd/gateway: Adapt it to read the encryption key from the key-file or use the
one passed by a command line flag.
* pkg/process: Export the default configuration filename so other packages which
use the same value can reference to it rather than having it hardcoded.
* Adapt several integrations (scripts, etc.) to consider the changes applied in uplink and cmd packages.
* cmd/uplink: add share command to restrict an api key
This commit is an early bit of work to just implement restricting
macaroon api keys from the command line. It does not convert
api keys to be macaroons in general.
It also does not apply the path restriction caveats appropriately
yet because it does not encrypt them.
* cmd/uplink: fix path encryption for shares
It should now properly encrypt the path prefixes when adding
caveats to a macaroon.
* fix up linting problems
* print summary of caveat and require iso8601
* make clone part more clear
* tie defaults to releases
this change makes it so that by default, the flag defaults are
chosen based on whether the build was built as a release build or
an ordinary build. release builds by default get release defaults,
whereas ordinary builds by default get dev defaults.
any binary can have its defaults changed by specifying
--defaults=dev
or
--defaults=release
Change-Id: I6d216aa345d211c69ad913159d492fac77b12c64
* make release defaults more clear
this change extends cfgstruct structs to support either
a 'default' tag, or a pair of 'devDefault' and 'releaseDefault'
tags, but not both, for added clarity
Change-Id: Ia098be1fa84b932fdfe90a4a4d027ffb95e249c6
* clarify cfgstruct.DefaultsFlag
Change-Id: I55f2ff9080ebbc0ce83abf956e085242a92f883e
* Initial Webserver Draft for Version Controlling
* Rename type to avoid confusion
* Move Function Calls into Version Package
* Fix Linting and Language Typos
* Fix Linting and Spelling Mistakes
* Include Copyright
* Include Copyright
* Adjust Version-Control Server to return list of Versions
* Linting
* Improve Request Handling and Readability
* Add Configuration File Option
Add Systemd Service file
* Add Logging to File
* Smaller Changes
* Add Semantic Versioning and refuses outdated Software from Startup (#1612)
* implements internal Semantic Version library
* adds version logging + reporting to process
* Advance SemVer struct for easier handling
* Add Accepted Version Store
* Fix Function
* Restructure
* Type Conversion
* Handle Version String properly
* Add Note about array index
* Set temporary Default Version
* Add Copyright
* Adding Version to Dashboard
* Adding Version Info Log
* Renaming and adding CheckerProcess
* Iteration Sync
* Iteration V2
* linting
* made LogAndReportVersion a go routine
* Refactor to Go Routine
* Add Context to Go Routine and allow Operation if Lookup to Control Server fails
* Handle Unmarshal properly
* Linting
* Relocate Version Checks
* Relocating Version Check and specified default Version for now
* Linting Error Prevention
* Refuse Startup on outdated Version
* Add Startup Check Function
* Straighten Logging
* Dont force Shutdown if --dev flag is set
* Create full Service/Peer Structure for ControlServer
* Linting
* Straighting Naming
* Finish VersionControl Service Layout
* Improve Error Handling
* Change Listening Address
* Move Checker Function
* Remove VersionControl Peer
* Linting
* Linting
* Create VersionClient Service
* Renaming
* Add Version Client to Peer Definitions
* Linting and Renaming
* Linting
* Remove Transport Checks for now
* Move to Client Side Flag
* Remove check
* Linting
* Transport Client Version Intro
* Adding Version Client to Transport Client
* Add missing parameter
* Adding Version Check, to set Allowed = true
* Set Default to true, testing
* Restructuring Code
* Uplink Changes
* Add more proper Defaults
* Renaming of Version struct
* Dont pass Service use Pointer
* Set Defaults for Versioning Checks
* Put HTTP Server in go routine
* Add Versioncontrol to Storj-Sim
* Testplanet Fixes
* Linting
* Add Error Handling and new Server Struct
* Move Lock slightly
* Reduce Race Potentials
* Remove unnecessary files
* Linting
* Add Proper Transport Handling
* small fixes
* add fence for allowed check
* Add Startup Version Check and Service Naming
* make errormessage private
* Add Comments about VersionedClient
* Linting
* Remove Checks that refuse outgoing connections
* Remove release cmd
* Add Release Script
* Linting
* Update to use correct Values
* Move vars private and set minimum default versions for testing builds
* Remove VersionedClient
* Better Error Handling and naked return removal
* Straighten the Regex and string conversion
* Change Check to allows testplanet and storj-sim to run without the
need to pass an LDFlag
* Cosmetic Change to Dashboard
* Cleanup Returns and remove commented code
* Remove Version Check if no build options are passed in
* Pass in Config Values instead of Pointers
* Handle missed Error
* Update Endpoint URL
* Change Type of Release Flag
* Add additional Logging
* Remove Versions Logging of other Services
* minor fixes
Change-Id: I5cc04a410ea6b2008d14dffd63eb5f36dd348a8b
* Divide uplink and gateway params set
* attempt to fix docker
* attempt to fix all in one
* test
* more reorganization
* fix compilation error
* fix imports order
* fix dependency
* rename structs
* keep minio params for now
* review comments
* remove manual flag check
* Consolidate identity management:
Move identity cretaion/signing out of storagenode setup command.
* fixes
* linters
* Consolidate identity management:
Move identity cretaion/signing out of storagenode setup command.
* fixes
* sava backups before saving signed certs
* add "-prebuilt-test-cmds" test flag
* linters
* prepare cli tests for travis
* linter fixes
* more fixes
* linter gods
* sp/sdk/sim
* remove ca.difficulty
* remove unused difficulty
* return setup to its rightful place
* wip travis
* Revert "wip travis"
This reverts commit 56834849dcf066d3cc0a4f139033fc3f6d7188ca.
* typo in travis.yaml
* remove tests
* remove more
* make it only create one identity at a time for consistency
* add config-dir for consitency
* add identity creation to storj-sim
* add flags
* simplify
* fix nolint and compile
* prevent overwrite and pass difficulty, concurrency, and parent creds
* goimports
apparently, the presence of an "Identity" attribute in a config struct
does not imply that anything will fill it in or use it.
i tested all of these executables manually and individually this time.
This change removes automatic metrics reporting for everything going
through process.Exec(), and re-adds metrics reporting for those commands
which are expected to be long-lived. Other commands (which may have been
intermittently sending metrics before this, if they ran unusually long)
will no longer send any metrics.
For commands where it makes sense, a node ID is used as the metrics ID.
* Adding other top level vars to be parsed into config
* Adding additional vars for parsing
* Fixing shell script conditionals in remaining entrypoints
* Adding null default for remaining env variable if statements
* If the directory is somehow persistent, but the config file itself isn't created yet, create it
* Other improvements to thd storagenode Docker image
* Other improvements to thd satellite Docker image
* Other improvements to thd gateway Docker image
* Other improvements to thd uplink Docker image
* Add '--dir' param for all CLI parts (replace --base-path)
* FindDirParam method moved
* fix compilation error
* make param global
* remove unused fields
* rename param
* remove config flag
* goimports
* Write access for uplink mount command
* fix linter problems
* Fix closing wrong variable and debug logs
* goimports
* fix problem with missing getattr for large files
* better map initialization
* fixes after comments
* add support for making directory
* add support for removing directories
* optimize OpenDir and Rmdir methods
* use storj.JoinPaths
* fix linter issues
* remove useless error check
The old paths.Path type is now replaced with the new storj.Path.
storj.Path is simply an alias to the built-in string type. As such it can be used just as any string, which simplifies a lot working with paths. No more conversions paths.New and path.String().
As an alias storj.Path does not define any methods. However, any functions applying to strings (like those from the strings package) gracefully apply to storj.Path too. In addition we have a few more functions defined:
storj.SplitPath
storj.JoinPaths
encryption.EncryptPath
encryption.DecryptPath
encryption.DerivePathKey
encryption.DeriveContentKey
All code in master is migrated to the new storj.Path type.
The Path example is also updated and is good for reference: /pkg/encryption/examples_test.go
This PR also resolve a nonce misuse issue in path encryption: https://storjlabs.atlassian.net/browse/V3-545
* Initial Layout
* Commit to test File Handling OS independed
* Hide struct properties to prevent manual interaction
* Fix Linting Errors
* 1st Working Windows Version
* Add missing Error Handling
* Fix Linting Errors
* Remove dependencies
* Further Improvements
* Remove commented code
* Improve comments and error messages
* No pointers to FPath
* Improve comment
* Do not filepath.ToSlash URL path
* Extract helper functions for parsing local path and Storj path
* Minor Improvements based on PR Comments
* Fix Linting Error and make Regex private
* Improve Layout
* Rework FPath and add tests
* Add more tests cases for windows
* Use for-loop instead of goto
* Use FPath in all uplink commands
* Add guard checks
* Add Test Cases and add comments
* merged the lasted master changes
* debug working of handling ctrl+c
* Handling of clean up of partially uploaded segments and pieces
* code cleanup per code comment
* updates based on code review comments
* add mb command
* forgot colon
* add command descriptions
* use utils.ParseURL in commands
* return error message instead of minio.BucketAlreadyExists in mb
* ls command with bucket store functionality
* rb command with bucket store functionality
* rm command with bucket store functionality
* newline
* use print rather than errs for messages, add no buckets messsage
* cp command with bucket store functionality
* remove deprecated getStorjObjects function
* defer utils.LogClose(f) on instead of defer f.Close()
* Check for no buckets after for loop
* add checks for unspecified bucket in bucket store methods
* fix incorrect return types
* add no path error messages in object store methods
* split copy into helpers
* srcObj scheme check in download
* print buckets instead of appending to slice
* check if destObj.Host != srcObj.Host
* better method of handling destination name if not specified
* uplink rename
* final cleanups
* trailing slash fixes
* linting
* more linting
* helpful error messages
* Adjust startAfter after merging #328
* Improve output messages
* Improved error check for empty bucket and path
* No page limit on client side. Rely on server side limit.
* Better time formatting
* Fix paths in recursive list results
* Normalize the dockerfiles and entrypoints
* fix formattting and docker-compose file
* add missing env var to satellite dockerfile
* Remove build args no longer in use
* More changes to make it all work
* Finally fix the binary builds for a couple os/arch combinations
* Make the file executable before adding it to the zip
* This cache hack wasn't suppose to make it into the PR
* Guard against calling the binary target by itself
* Order matters on OS X
* Vendored my image
* No 386 builds until storage is fixed.
* First pass at building binaries
* Finished building images
* Reworked some bits to save binaries in a better place.
* First pass at uploading binaries
* Builds for freebsd fail currently
* Add ignore file for docker builds to not invalidate the cache as often
* Docker image for 1.11-alpine exists now
* Name windows binaries correctly
* The makefile is used in tests.
* Take a swing at updating the tests for 1.11
* Switch to something with glibc so the race detector works.
* Remove unused .PHONY targets
