First from two methods needed to perform server-side move. It gets
metadata key and nonce and all segments key and nonces and returns
all of that to uplink.
Change-Id: Ied2c79559e77d3f63091c4d61948f2d6a2147d67
Remove the logic associated to the old transfer queue.
A new transfer queue (gracefulexit_segment_transfer_queue) has been created for migration to segmentLoop.
Transfers from the old queue were not moved to the new queue.
Instead, it was still used for nodes which have initiated graceful exit before migration.
There is no such node left, so we can remove all this logic.
In a next step, we will drop the table.
Change-Id: I3aa9bc29b76065d34b57a73f6e9c9d0297587f54
Currently TextMaxVerifyCount flakes in some tests, try increasing the
sleep time to ensure that things are slow enough to trigger the error
condition.
Also pass ctx to all the funcs so we can handle sleep better.
Change-Id: I605b6ea8b14a0a66d81a605ce3251f57a1669c00
Currently, requests that were successfully passed through the metainfo
endpoints rate-limiter might still fail in the middle of the
corresponding response. The problem is that we perform rate-limiting a
second time, which means other requests would influence whether the
current (already rate-checked) request will fail. This also has other
unintended effects, like responding with rpcstatus.PermissionDenied for
requests that were successfully rate-checked and did not lack
permissions but were rate-checked again in the middle of
(*Endpoint).BeginObject. This situation has been happening on the
gateway side and might affect other uplink clients. This change, where
appropriate, swaps subsequent validateAuth with validateAuthN that
performs rate-limiting once.
Change-Id: I6fc26dedb8c442dd20acaab5942f751279020b08
Current default is equal to hardcoded maximum of batch size
for loop listing. With this change we will bump maximum
batch size but current default won't change. We will be able to
increase it later without need for source code change.
Change-Id: I2744a87be28af4157f58ede73455682f61733bc1
We were using this method for metainfo loop but now
segment loop is not using it so we can drop it.
Change-Id: I60c5b4f86a619259906d8c2ba76e665b8715be75
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
* Disabled updating project for paid tier users who have 0 storage or
bandwidth limits set (these users have been disabled and should not be
able to increase their limits through the UI)
* Better error handling
* Removed unnecessary type conversions
Change-Id: I1e07a1909a4ba877718aa944848f36382f7dbbe2
GetRandomStripe function to randomly select a segment stripe to
audit was using `segment.EncryptedSize/segment.Redundancy.StripeSize()`.
Since integer divsion truncates it leads to skipping last stripe if
its size is less than stripe size. Use `Redundancy.StripeCount` to
get correct stripe count.
Change-Id: Ida09e035be30a21219ab3e1aedd66af8be707d1b
Don't update the project description if the request body has the
description field set to an empty string.
This follows the same convention used for updating an user's account.
Change-Id: I027047e609760e033cf4b233b1be352c6bf0ec8f
the month
The Stripe API had a bug before that it wasn't calcualting the input
timestamp based on correct timezone. We had a workaround to not include
the last day of the month in our code when submitting to Stripe.
Now, Stripe has fixed the issue. We need to remove the workaround and
include the last day of the month into our invoice generation
Change-Id: Ic6364ed071be73a19f0b0b46f274a02fb2489db5
If we encounter an error during the infectious error correction, we just
add it to the errlist to be logged at the worker level.
We want to make sure we know about this if it happens. Give it its own
error log and increment a monkit metric.
Change-Id: Ie5946ae3cd97b766e3099af8ce160a686135ee27
Additional test case where user is uploading 3 segments
each within 23h interval and when zombie deletion process
is executed then nothing is deleted because last segment
was uploaded in less then 24h.
Change-Id: I7426d6fe2c7e9b88c054a01408910c986bcf8d5f
Two small cleanups:
* merging private commitObject, commitSegment,
makeInlineSegment with its public versions. We were
using it when pb.Pointer was still used.
* removing unused CreatePath method
Change-Id: Ib18b07473d91259335dab874559ef52412ab813d
Currently, post requests originating from www.storj.io are failing
because the content-type header is not permitted for the /register
endpoint.
Change-Id: I14f21c2a27d8f0c8bae3609a5bf4b1e69a72c119
Rate limits application of coupon codes by user ID to prevent
brute forcing. Refactors the rate limiter to allow limiting based
on arbitrary criteria and not just by IP.
Change-Id: I99d6749bd5b5e47d7e1aeb0314e363a8e7259dba
Added options flag to define after which object won't be marked as inactive. All segments CreatedAt
time needs to be bellow this flag to treat object as inactive.
Change-Id: Ib5cffc776c6ee1b62b51eb8595438f968b42528c
When a node gets enough timeouts, it is supposed to be removed
from pending_audits and get an audit failure. We would give them
a failure, but we missed the removal. This change fixes it.
Change-Id: I2f7014e28d7d9b01a9d051f5bbb4f67c86c7b36b
"audit failed" is already used when a node fails an audit. That makes
searching for this higher level audit worker error more difficult.
Additionally, the presence of errors from the audit worker doesn't
necessarily mean the audit failed. Reword the error message to
"error(s) during audit"
Change-Id: I0aab12c73c18d4bd962c5d8ac8a17cabcec022e6
This change syncs batchSizeLimit and ListLimit constants to prevent
throwing away results returned while listing with a maximum returns
limit.
Change-Id: Ie2425542d945cb88653dcc34c079737bb32320d4
This currently contains tests for both graphql and regular endpoints.
Co-authored-by: Antonio Franco <antonio@storj.io>
Change-Id: I28d7e629b1caa114438d6fbc3abcc079a8ca10a6
This change allows users to disable multi-factor authentication
with a recovery code. Previously, users could only disable MFA
with a passcode.
Change-Id: Iec20bf7d8f6781182b81d1f17d9641491dbc8460
This command is intended to be run as part of invoice generation - it
iterates over Stripe customers, and applies the free tier coupon to any
customer who doesn't already have a coupon.
This way, we can ensure that all customers have at least the free tier
coupon before and after invoice generation, in case a different coupon
has expired.
Change-Id: I33a4aff9174049f9e051de53ef65298ca65ed688
Adds a banner at the top of the dashboard warning the user if he
has 3 or less MFA recovery codes.
Change-Id: I3271f1fe33501eaeeeca343bf60ca899e80f0fa1
Added editable fields to the project details page for Storage Limit and Bandwidth limit. Leveraged existing types when possible.
Added fixed checking into the limits to prevent reducing limits beyond current usage, as well as limiting usage to less than the default paid tier maximum.
Change-Id: I07ce53470919a8a9d4dce56ade6904ede8daf34c
Set the Access-Control-Allow-Origin header if a request is made to the
registration endpoint from storj.io or www.storj.io. This allows the
client to make the request with no issues.
Change-Id: I0cd747ececfe877fb5f834d8292307fc14e3db5c
We're seeing BeginDeleteObject in metaclient returning object not found:
metabase: no rows deleted in the Gateway-MT mint tests. There's a
client check for rpcStatus.NotFound, but the metabase endpoint isn't
wrapping the db error as a DRPC error.
Here's the chain:
gateway.AbortMultipartUpload()
project.AbortUpload()
metainfoClient.BeginDeleteObject() <- understands DRPC errors
endpoint.DeletePendingObject() <- where this code is
db.DeletePendingObject() <- returns error
Change-Id: I93991de76487426df0a807b0d1e69fc975196a1a
nodes and audit_history tables
This PR removes all code reference to audit_histories table and
```
audit_reputation_alpha, audit_reputation_beta,
unknown_audit_reputation_alpha, unknown_audit_reputation_beta,
```
columns from nodes table.
It also drops audit_histories table from the db since the code
that's referencing it currently are not being used.
Change-Id: Ifcda8db36afb3a333d487ff831f2fdefc8b02a4c
Updates the password reset page to use the new theme.
Adds new endpoint '/api/v0/auth/reset-password'
for password reset.
Additionally, updates the link-clicking mail simulator to only
click links with a specified attribute. Otherwise, the password reset
cancellation link would be clicked before the password reset link
could be accessed, rendering testing impossible.
Change-Id: I8fde74ef7ad980880a7bf6558e3b9ed31509a393
When we can't complete an audit or repair, we need more information about
what happened during each individual share/piece download.
In audit, add the number of offline, unknown, contained, failed nodes to
the error log. In repair, combine the errors from each download and add
them to the error log.
Change-Id: Ic5d2a0f3f291f26cb82662bfb37355dd2b5c89ba
To optimize memory consumption we where consuming
segment data during processing results from delete
query. Turns out that there is a chance that query will be
rolled-back if something will go wrong while reading
results. In such case its possible to delete pices but
object/segment will be still in DB.
This change removed piece deletion from problematic
place. Pieces are still deleted in batches but are not
limited at the moment. To avoid memory issues object
deletion batch was decreased.
Change-Id: Icb3667220f9c25f64b73cf71d0cf3fdc7e5107c5
Rename the entities in the endpoint paths from singular after we have
agreed that it matches with API design best practices.
Change-Id: I5bdc086c64c6f93e45a13436b65863fc3e8d864e
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
MFA is complete and we are good to enable it in production. This change
removes the flag that disables MFA by default.
Change-Id: I2f985ae501171bdab505d664b43c8cfc248bad8d
We need a way to delete whole part. This especially
needed for uplink multipart API to do cleanup after
aborted or failed part upload.
Test will be added when uplink part will be merged.
Change-Id: I9ba69a49e1adcdce0f42dd3a76f938fcf931155a
This change adds dedicated methods on metabase.Pieces to be able to add, remove pieces and also to check duplicates.
Change-Id: I21aaeff40c017c2ebe1cc85a864ae546754769cc
Added includeMetadata parameter which represents if metadata should be included in response
by default true, in case of new uplink version - ObjectIncludes will be used instead.
Change-Id: I2f8d3b4cc354cd655f8093bbbebe0e3c2ae14e6f
Error from joining loop should not restart satellite. This will be the
same error like for loop itself. In the same way we are handling joining
error for other services that are using segment loop.
Change-Id: Idf1035ef7f78462927bd23989ed8a4ee5826c49e
In case when number of deleted segments in a single
batch was multiplication of opts.DeletePiecesBatchSize it
was possible to finish deletion of objects to early.
Change-Id: I9181d4a3c64053d9df46a11a6e0cd22153c73ee9
Added Enter MFA passcode step to login after first attempt.
Connected client-side and server-side.
Change-Id: I4482afde50172bbf2c598aa01bbd220763b4f6d1
We made decision to avoid satellite shutdown when segment loop
will return error. Loop still can reeturn error but it will be logged
and we will make monitoring/alert around that error.
Change-Id: I6aa8e284406edf644a09d6b1fe00c3155c5430c9
Error message for attempting to activate an already-activated
account is removed from its own page and incorporated into the
login page in an identical manner to the message that appears
upon successful activation.
Change-Id: I29cd2685a7808fa71d34a439c86a38eb5fc3e199
It turns out that some DB methods are not
passing context to to lower levels even if have
context as a parameter.
Change-Id: I82f4fc1a47c362687a91364d85e4468057e53134
gracefulexit
With the effort to move audit related data into reputation store, this
PR updates gracefulexit endpoint to use reputation service to get a
node's audit score
Change-Id: Iad93ea689ad67ff9c57c7be16687e21e715fab7a
Currently, reputation table is only populated when a node has been
audited. This is ok in production, however a lot of our tests doesn't
upload any data or trigger audits.
This PR adds an initialization step in testplanet to populate reputation
table with zero value for nodes reputation.
Change-Id: I11b381236669db346dc68a48a6d4a27334a0a8b8
package in audit
This PR implements reputation store and replace overlay in audit service
to use such store for storing node's audit stats.
In order to keep the changeset smaller, most of the changes in this PR is for copying audit logic in overlay to
reputation package. In a following PR, the duplicating code will be
removed from overlay.
Change-Id: I16c12494a0970f44c422b26cf603c1dc489e5bc1
In the past ExpirationDate was available inside CreatePutRepairOrderLimits
but this was removed since the metabase segment was missing the ExpiresAt field.
Now ExpiresAt field is available in the metabase segment
and can be set correctly while executing NewSignerRepairPut.
Change-Id: I068c07492ab27bde2c44477bbd32c5872edd024a
Full path: satellite/{payments,console},web/satellite
* Adds the ability to apply coupon codes from the billing page in the
satellite UI.
* Flag for coupon code UI is split into two flags - one for the billing
page and one for the signup page. This commit implements the first, but
not the second.
* Update the Stripe dependency to v72, which is necessary to
use Stripe's promo code functionality.
Change-Id: I19d9815c48205932bef68d87d5cb0b000498fa70
Added MFA passcode and recovery code field for token requests.
Added endpoints for MFA-related activity: enabling MFA,
disabling MFA, generating a new MFA secret key, and
generating new MFA recovery codes.
Change-Id: Ia1443f05d3a2fecaa7f170f56d73c7a4e9b69ad5
Provides the means to serve an error to the user with a user-friendly
error message (serveCustomJSONError). Auth API uses this when
processing registration attempts.
Previously, the error message was inferred by the client based on
the status code of the response received from the server. However,
if multiple distinct errors fit a certain status code, it was impossible
to correctly interpret the error.
Change-Id: I2f91e9c81ba1a4d14ba67e0b4b531a48800d4799
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration and made accessible through graceful exit db in another one.
This changes makes graceful exit enqueue transfer items for new exiting nodes in the new table.
Change-Id: I7bd00de13e749be521d63ef3b80c168df66b9433
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration.
This change gives access to this table.
Graceful Exit doesn't use the table yet, this will be done in a next change.
Change-Id: I6c09cff4cc45f0529813a8898ddb2d14aadb2cb8
In most situations where we would not get enough shares to complete
an audit, something has probably gone wrong like a forgotten delete,
and nodes should not be failed. We have an alert when this occurs.
Check the logs to see what happened. If we decide the nodes should
get audit failures, we can do it manually.
Change-Id: Ib6e408082048d31197c37ebfd7f9031135fc938f
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
Columns for MFA status, secret key, and JSON-encoded array of
recovery codes are added to the users table.
Change-Id: Ifed7e50ec9767c1670d9682df1575678984daa60
Added feature flag for MFA
Added new client-side api call to enable MFA returning secret
Updated users Vuex module to include new API call
Change-Id: Ia9e10f68c4a7da39b4f7c1073e657c2de98fb0db
Current tally is calculating storage both for buckets and
storage nodes. This change is moving nodes storage
calculation to separate service that will be using
segment loop.
Change-Id: I9e68bfa0bc751c82ff738c71ca58d311f257bd8d
The user must complete a reCAPTCHA in order to register.
ReCAPTCHA verification failure results in rejection of the
registration attempt.
Change-Id: I34ba7db414d756fd1aaebdc3d19cccbfc7fc1ea3
When a user adds a credit card, switch them to the paid tier and update
their projects with new bandwidth/storage limits. New projects for the
paid tier user will also have the updated limits.
The new limits are:
* storage per project - 50 GB free/25 TB paid
* bandwidth per project - 50 GB free/100 TB paid
Change-Id: I7d6467d077e8bb2bbe4bcf88ab8d75490f83165e
The previous query was making a full table scan. This modifies code to
do the queries separately on each action. It will probably be slower on
a small table, however there should be a several magnitude boost on
large tables.
Change-Id: Ib8885024d8a5a0102bbab4ce09bd6af9047930c9
When the delta is very small from the bounds then the ratio calculation
doesn't work that well. Let's allow 100 from the bounds, since that
would be expected in any case.
We won't add a configuration for it, since it's not that useful.
Change-Id: I049066a42470b825f430b7f32ebe92d544c6cc8b
Added new info banner to show user their used and total storage values with a button to upgrade to Paid Tier with auto limit increase
Change-Id: I827818dcb5179358df246218a47feb61bc1a1bac
We want to calculate bucket tally only from iterating objects.
Object currently has an info about totals for bytes and segments.
We need to adjust tallies to keep those totals. Older entries will
be untouched and code will use totals only if available. Change
is adding columns for totals to bucket_storage_tally table and
is adding general handling for them.
Next step is to start using total columns instead of inline/remote.
This will be done with next change.
Change-Id: I37fed1b327789efcf1d0570318aee3045db17fad
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
So that we can easily see whether a user is in the paid tier without
querying for payment methods.
Change-Id: I122566ddd0953203f852741fa12c71795bc1ec5c
Period end was calculated
incorrectly as it was still in current month but
should be the first day of next month.
Change-Id: I37451d29a9b901b69e6c3c401b333c58b3376d61
this service exists to do currency conversions, which is
the best I can assume that this was meant to be named.
Change-Id: Ia2416f5475749e8bfe8d05bf491649576f6d77bf
This change removes all the separate implementations for
`apiservice.serveJSONError()` and defines one for every service to use
in `consoleapi/common.go`.
Change-Id: Iabf184e5cba69a98eb25936ce11ebd07f02c8ff3
Because of our free/paid tier plan, we do not need a paywall anymore. We
have not used it in a while, but still have leftover code laying around.
Change-Id: Iaea8c39faf042a2f7a6b837727bb135c8bdf2907
Adding AS OF SYSTEM TIME to query that is calculating project bandiwdth.
As an addition method for setting interval is added as test doesn't
work well with default interval.
Change-Id: Id1e15be4f6afff13b9dc2b7f595e2edb6de28db9
Currently, pending audit is finding segment by segment location
(path) because we want to move audit to segmentloop and we will
have only StreamID and Position we need to add columns for those
fields. Altering existing table can cause issues while
migration and deployment. Cleaner choise is to make new table.
This change contains migration with new segment_pending_audit
table that will replace pending_audits table and adjustments
to use new table in the code.
Table pending_audits will be dropped with next release.
Change-Id: Id507e29c152da594bac1fd812c78d7ecf45ec51f
table graceful_exit_segment_transfer_queue will be used to replace graceful_exit_transfer_queue. Currently, it uses the path of a segment to keep track of pieces to be transferred. As we want to use the segment metainfo loop, we will need to record stream_id and position of the segment instead of relying on object path.
This change also add a uses_segment_transfer_queue column to the graceful_exit_progress table to be able to know if a transfer has been initiated while using the old table.
Change-Id: Iafb1e8e65ba124e20de4a9ff76da181c3222de7e
Added new endpoint and service method to return total usage and limits for all the projects that user owns.
It is needed for new paid tier UI
Change-Id: Ic5b67ca7b275ec4930d976a007168235c0500b70
It's possible that single object will have a lot of segments and
at the moment we are trying to collect all pieces at once and
send to storage nodes information about deletion. Such
approach my lead to using extensive amount of memory. This
change is handling this problem by calling DeletePieces
function multiple times with only part of pieces to delete for
a single call.
Change-Id: Ie1e66cd9d86d130eb89a61cf6e23f38b8cb8859e
Define service and DB interface for storing node reputation data
and updating the overlay cache.
Add overlay service and DB method UpdateReputation.
See https://github.com/storj/storj/pull/4144
Change-Id: Iedd8bd3274457d26c595919303d55327c1464b8c
The reputation table duplicates the reputation information in the
nodes table. It will be used for implementing the reputation
service.
Change-Id: I36c0318e8fa5f535e9d527df95b22a4f9eb365d4
the very common case is that the node api version is
indeed at least the requested version, so query for
that first to avoid write traffic.
Change-Id: Ib047d93078205bc07fee75d1f635503b792307f0
* added signup personal user test & added testDefault:true to OpenRegistrationEnabled in service.go
* added copyright
* fixed import ordering
* fixed comment formatting and gofmt-ed with -s
* gofmt-ed with -s and -w
* fixed fragile elements
* fixed one more fragile element
* fixed nesting
* removed unnecessary timeout
* fixed imports
We used this to reduce initial load on the core to avoid OOM. However,
this is not a problem anymore with garbage collection running
separately.
Change-Id: Ifd62c822a74974bc21a5913199334469a4bc0130
This adds verification for the processed count and before and after
segment/objects table counts.
This adds new flag:
metainfo.segment-loop.suspicious-processed-ratio: 0.03
This defaults to 3%, which at 100M segments is 3M segments.
Change-Id: I5ee03e913ddc4e67e94010ced126a2a9ea51f41b
This adds verification for the processed count and before and after
segment/objects table counts.
This adds new flag:
metainfo.loop.suspicious-processed-ratio: 0.03
This defaults to 3%, which at 100M objects is 3M objects.
Change-Id: Ife5522ecc97bcc5a55667f36868a0f1fc8e4c561
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
