Removes database tables and functionality related to our custom
coupon implementation because it has been superseded by the Stripe
coupon and promo code system. Requires implementations of the
payments Invoices interface to return coupon usages along with
invoices.
Change-Id: Iac52d2ff64afca8cc4dbb2d1f20e6ad4b39ddfde
New command for cli to move object to different
location.
uplink mv sj://bucket/your-object sj://bucket/moved-object
Change-Id: I85a4961aa59f250819954e78f20363ac3c570938
Make bucket command was using full location
specified in command line instead only bucket name.
As an addition change contains basic integration tests
with storj-sim.
Change-Id: Ie3b5283468b7fbde0b1333f01dc4fc2a2952e1a1
Jenkins uses the same folder for different PR-s. Sometimes other runs do
not cleanup after themselves (e.g. timeout), hence add a cleanWs step to
ensure we delete files in the workspace.
gateway-st introduced a replace directive in go.mod, which does not work
with go install. Hardcode to the last version without the directive.
Using this fix to unblock ci builds.
Change-Id: I5e5d75bf47e30a5a8b6d835867c0c9176f25e08a
Use multipart upload to upload single object in parts in
parallel. Its using parallelism flag added earlier.
Change-Id: I45b531a5db43c86f0112a5e3bb4a83bc1d65650f
Adds support for new uplink method DownloadObjectAt which
gives ability to download single object in parallel.
Change-Id: I8388653429992b0d24c383d17d7e90904203fe77
Rate limits application of coupon codes by user ID to prevent
brute forcing. Refactors the rate limiter to allow limiting based
on arbitrary criteria and not just by IP.
Change-Id: I99d6749bd5b5e47d7e1aeb0314e363a8e7259dba
MFA is complete and we are good to enable it in production. This change
removes the flag that disables MFA by default.
Change-Id: I2f985ae501171bdab505d664b43c8cfc248bad8d
package in audit
This PR implements reputation store and replace overlay in audit service
to use such store for storing node's audit stats.
In order to keep the changeset smaller, most of the changes in this PR is for copying audit logic in overlay to
reputation package. In a following PR, the duplicating code will be
removed from overlay.
Change-Id: I16c12494a0970f44c422b26cf603c1dc489e5bc1
Full path: satellite/{payments,console},web/satellite
* Adds the ability to apply coupon codes from the billing page in the
satellite UI.
* Flag for coupon code UI is split into two flags - one for the billing
page and one for the signup page. This commit implements the first, but
not the second.
* Update the Stripe dependency to v72, which is necessary to
use Stripe's promo code functionality.
Change-Id: I19d9815c48205932bef68d87d5cb0b000498fa70
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
Added feature flag for MFA
Added new client-side api call to enable MFA returning secret
Updated users Vuex module to include new API call
Change-Id: Ia9e10f68c4a7da39b4f7c1073e657c2de98fb0db
The user must complete a reCAPTCHA in order to register.
ReCAPTCHA verification failure results in rejection of the
registration attempt.
Change-Id: I34ba7db414d756fd1aaebdc3d19cccbfc7fc1ea3
When a user adds a credit card, switch them to the paid tier and update
their projects with new bandwidth/storage limits. New projects for the
paid tier user will also have the updated limits.
The new limits are:
* storage per project - 50 GB free/25 TB paid
* bandwidth per project - 50 GB free/100 TB paid
Change-Id: I7d6467d077e8bb2bbe4bcf88ab8d75490f83165e
Because of our free/paid tier plan, we do not need a paywall anymore. We
have not used it in a while, but still have leftover code laying around.
Change-Id: Iaea8c39faf042a2f7a6b837727bb135c8bdf2907
Adding AS OF SYSTEM TIME to query that is calculating project bandiwdth.
As an addition method for setting interval is added as test doesn't
work well with default interval.
Change-Id: Id1e15be4f6afff13b9dc2b7f595e2edb6de28db9
We used this to reduce initial load on the core to avoid OOM. However,
this is not a problem anymore with garbage collection running
separately.
Change-Id: Ifd62c822a74974bc21a5913199334469a4bc0130
This adds verification for the processed count and before and after
segment/objects table counts.
This adds new flag:
metainfo.segment-loop.suspicious-processed-ratio: 0.03
This defaults to 3%, which at 100M segments is 3M segments.
Change-Id: I5ee03e913ddc4e67e94010ced126a2a9ea51f41b
This adds verification for the processed count and before and after
segment/objects table counts.
This adds new flag:
metainfo.loop.suspicious-processed-ratio: 0.03
This defaults to 3%, which at 100M objects is 3M objects.
Change-Id: Ife5522ecc97bcc5a55667f36868a0f1fc8e4c561
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Currently we did not limit the "as of system time" for iterating over
objects table. Using just an interval would cause problems with the
tests. That could be overcome skipping that interval for tests
altogether, however, we should probably test those more to ensure that
GC stays working as intended.
This is a safer code, however, maybe not as straigthforward as it could
be.
Change-Id: I374f77783b2af42bb6da846735ceea20a7ce5e60
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Rather than applying our internal satellite implementation of coupons
when new accounts are created, use a configured Stripe coupon instead.
If no configuration is set, no coupon will be applied.
This change also removes logic for adding coupons to customers who pay
with crypto - they will already have the free tier coupon applied
anyway.
We will be phasing out our internal coupon implementation.
Change-Id: Ieb87ddb3412acbc74986aa9d18a4cbd93c29861a
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
The previously configured never-expiring coupon does not refill every
month. Eventually, even though it never expires, it will run out. This
commit makes several small changes to address this issue for the free
tier:
* Change the config for the promotional coupon to be $1.65 for 1 month
(the change from $10 to $1.65 is due to our recent pricing changes)
* Update PopulatePromotionalCoupons (PPC for brevity) to add promotional
coupons to users with expired and consumed coupons (all users with a
project and no active coupons should get a new coupon when PPC is called)
* Call PPC at the end of the `create-invoice-coupons` stage of invoice
generation - after current coupons are processed and expired/exhausted.
* Remove legacy admin functionality for PPC from satellite/console - we
do not currently use it, but if we did, it should be in satellite/admin
instead.
Change-Id: I77727b97bef972df32ebb23cdc05055827076e2a
Allows us to remove the following files from satellite branding
repo, with an up-to-date single source of truth now in storj/storj:
* web/satellite/src/common/registrationSuccess.html
* web/satellite/src/common/registrationSuccess.scss
* web/satellite/src/views/register/registerArea.html
* web/satellite/src/views/register/registerArea.scss
The registrationSuccess files have been removed from all satellites in
the branding repository. The registerArea files have been removed only
from production satellites in the branding repository.
Importantly, this change enables the "resend email" functionality on
production satellites - previously, this functionality was available in
storj/storj, but not our branding repository.
Removes the config for VerificationPageURL, which redirected users away
from the satellite app to storj.io after creating an account. In order
for the email resend button to work, we cannot leave the app.
Adds a new config value for partner satellites, which replaces the
partner satellite names config. The new config includes name and
address. It is validated on setup/run to ensure it can be parsed.
Change-Id: I67db0702d9b9641f1a37b599f2929d56f3c33aca
Co-authored-by: littleskunk <jens.heimbuerge@googlemail.com>
Co-authored-by: JT Olio <hello@jtolio.com>
Co-authored-by: Igor <38665104+ihaid@users.noreply.github.com>
We can be more precise and conservative by using the backend
satellite/analytics service. We also no longer need client-side Segment
scripts.
Change-Id: Ic5fb18bea2d388b586ad773e26027d69bde87294
We already merged the multipart-upload branch to main. These two tools
make only sense if we are migrating a satellite from Pointer DB to
Metabase. There is one remaining satellite to migrate, but these tools
should be used from the respective release branch instead of from main.
Removing these tools from main will:
1) Avoid the mistake to use them from the main branch instead of from
the respective release branch.
2) Allow to finally remove any code related to the old Pointer DB.
Change-Id: Ied66098c5d0b8fefeb5d6e92b5e0ef5c6603df5d
The new default promotional coupon is $10/month, and doesn't expire.
This change also migrates the coupon.duration column over to the new
coupon.billing_periods, and switches to rely completely on
billing_periods.
Change-Id: Ic3341e9fa4040449bab5e66ca4ee2640b095cf3d
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
* integration tests have now a trap that will display where script failed, line and message
* functions from uplink tests moved to utils.sh to reuse them
Change-Id: Ib2311775fd70ce784aa986328969d75eefc5ac36
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
- add Credit History table to billing acount page and set up ui for a user adding promo codes
- implement promo codes ui in registration form
- add feature flag to handle if coupon code ui should be rendered
Change-Id: I9fdeef7cffc7901958d3f9be335e1115b2471a2e
A recent change made the default usage/storage limits for projects 50gb
rather than 500gb. This increases the default limit for testversions.
Change-Id: Ibea05c0d0760662e447b6455d560a2a640801c6c
* Set up basic structure of new service.
* Implement a basic analytics track event for user creation.
Change-Id: Ica8c785540b1ef9d848404af307a22f21d33c6aa
For time of transition from pointerdb to metabase we need add migration step to rollingupgrade tests and comment few cases.
Change-Id: Ib12ae6aa14be35f9bf4ff3efb55cfc6957d4ceba
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
We are implementing the free tier, which will give all new users 3
projects, 50gb storage, and 50gb bandwidth per project. All users will
receive a recurring coupon to cover this amount of usage.
With the free tier, we no longer need a paywall. Users will not need to
enter a payment method unless they want to increase their project or
usage limits.
Change-Id: If3b026e91858e5f557a2758e366616cecc8f21c7
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
Do not use Docker for running a Redis server in the test-sim that we
check that Satellite can still operate when Redis is unavailable because
we have to run this test in Jenkins and we don't want to empower a
container to be able to connect to the Docker socket of the host machine
for running sibling containers.
Change-Id: I6180e8ed804968c8ccb0783ed334acab38af9a0f
WHAT:
enter passphrase step for users who has already created passphrase
WHY:
to let users proceed to upload step
Change-Id: I084aec5b863981978cf190f99ee95154fbed9aab
WHAT:
beta satellite top banner's copy is changed to include support/feedback URLs
WHY:
so users using our beta satellite will be able to report feedback somewhere
Change-Id: Ibc349c8b3354b577275fcf1d2b75bfdd267729d9
The previous default FlushBatchSize of 10000 was causing major
slow down in select and insert statements on bucket_bandwidth_rollups.
We saw on the saltlake satellite that a FlushBatchSize of 1000 helped
reduce contention and query latency.
Change-Id: Ib95e73482219bc5aedc11925b1849fa5999774ba
WHAT:
config flag to indicate if satellite is in beta
WHY:
to avoid using hardcoded satellite names which may cause issues
Change-Id: If92eb7417c340bf343a9a91e2f6b11f0349020c5
This PR removes all back-end related referral program code including the
marketing portal.
We will have a separate PR for front-end code and database migration to
drop `offers` and `usercredits` table
Change-Id: If59f952cddfe0558a7dc03a0eac7cc1081517f88
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
The rollup archiver chore moves bucket bandwidth rollups and
storagenode rollups that are older than a given duration
to two new archive tables.
Change-Id: I1626a3742ad4271bc744fbcefa6355a29d49c6a5
Create a storj-sim test that checks that uplinks operations works when
satellite runs and can connect to Redis and when it cannot connect to
simulate a Redis downtime. Also verifies that the satellite can start
despite of Redis being downtime.
This test currently doesn't pass and it will be the one used to verify
the work that has to be done to make sure that the satellite allow the
clients to perform their operations despite of Redis being unavailable.
We require these changes before we deploy any customer face satellite on
a multi-region architecture.
NOTE that this test will be added later on to Jenkins to run this test
every time that we apply changes and at that time we'll see if it has to
be adjusted for being able to run on Jenkins because as it's now it may
not work because the scripts start and stop a Redis docker container.
Change-Id: I22acb22f0ca594583e36b45c88f8c03bac73b329
Full scope:
private/testplanet,satellite/{overlay,satellitedb}
Description:
In most cases, downtime tracking with audits will eventually lead
to DQ for nodes who are unresponsive. However, if a stray node has no
pieces, it will not be audited and will thus never be disqualified.
This chore will check for nodes who have not successfully been contacted
in some set time and DQ them.
There are some new flags for toggling DQ of stray nodes and the timeframes
for running the chore and how long nodes can go without contact.
Change-Id: Ic9d41fdbf214736798925e728245180fb3c55615
Query nodes table using AS OF SYSTEM TIME '-10s' (by default) when on CRDB to alleviate contention on the nodes table and minimize CRDB retries. Queries for standard uploads are already cached, and node lookups for graceful exit uploads has retry logic so it isn't necessary for the nodes returned to be current.
It turns out that alpine dropped support/updates for the aarch64 image.
Instead they have been using the arm64v8 notation for quite a while,
which resulted in breaking our recent aarch64 builds due to missing
dependencies/updates.
Both arches are exactly the same, aarch64 was created originally by Apple
and arm64 by GNU. The backends have been merged by now and the arm64 became
the de facto standard.
Since the Satellite now requires the order encryption functionality (since serial_number table is deprecated) to properly function, we can remove the config flag to turn on/off the feature.
Change-Id: Ie973f72a9a05a81cef9e53dc9c99d22c940c2488
This PR contains the minimum changes needed to stop inserting into the serial_numbers table. This is the first step in completely deprecating that table.
The next step is to create another PR to remove the expiredSerial chore, fix more tests, and remove any other methods on the serial_number table.
Change-Id: I5f12a56ebf3fa4d1a1976141d2911f25a98d2cc3
WHAT:
added brotli compression for wasm files and added copying of those files to static/wasm folder in Dockerfile
WHY:
those files are a part of web worker webpack bundle and I didn't find a way to compress them separately using webpack.
I'm open to any other ideas if they come up
Change-Id: I105cc1582e9816fd9b63052ba48358525c85a164
version
The test-versions test currently takes 1h 40min to run each time. By
running each installation concurrently, hopefully, it will reduce the execution
time for the whole test.
Change-Id: I680c7d9945e982894b11825c9075c167f754e087
We are no longer planning on implementing downtime penalization using
the method described in
docs/blueprints/archive/storage-node-downtime-tracking-deprecated.md.
Now, we are implementing the design described in
docs/blueprints/storage-node-downtime-tracking-with-audits.md.
This change removes the downtime estimation chores from the satellite
core as well as the package satellite/downtime. A future change will
remove the database table.
Change-Id: I1a1d3cf9dceeba36255d25243294865b89925518
WHAT:
POST request to get gateway credentials using access grant.
Put request url to config and use it for request.
WHY:
to show gateway credentials on UI
Change-Id: I15ef43ecdeed69b0961d5796aacb47f36d560b1b
this change tries really hard to never have all of the storage node
rollups in memory at the same time, up until the rollups are actually
getting summed together.
Change-Id: If67f49e7d71106798d996a6850b3e48671bd9e18
Rather than having a single repair override value, we will now support
repair override values based on a particular segment's RS scheme.
The new format for RS override values is
"k/o/n-override,k/o/n-override..."
Change-Id: Ieb422638446ef3a9357d59b2d279ee941367604d
CRDB doesn't like large deletes. While testing in the POC environment we found that deletes on the serial_numbers table could take hours. This change limits deletes to 1000 at a time (configurable) to avoid blocking other queries.
Change-Id: I08455e25db1574579dd4d7b7125a08e9c913dff1
We plan to add support for a new Reed-Solomon scheme soon, but our
repair queue orders segments by least number of healthy pieces first.
With a second RS scheme, fewer healthy pieces will not necessarily
correlate to lower health.
This change just adds the new column in a migration. A separate change
will add the new health function.
Right now, since we only support one RS scheme, behavior will not
change. Number of healthy pieces is being inserted as "segment health"
until the new health function is merged.
Segment health is calculated with a new priority function created in
commit 3e5640359. In order to use the function, a new config value is
added, called NodeFailureRate, representing the approximate probability
of any individual node going down in the duration of one checker run.
Change-Id: I51c4202203faf52528d923befbe886dbf86d02f2
Currently our code is only using github version of the code, so there
shouldn't be need for the exception.
Change-Id: I0c6e8a8465ab7b525d4b5d1b29e4e5298384286d
This PR does follwing changes:
1. Change oldest uplink version in the test to v0.35.3
When the test is first created, we decided to support uplink
version starting from v0.17.1, however with many API changes,
older uplinks are not usable with latest version of the network
anymore. One of the reasons being older uplinks uses deprecated
endpoint. Therefore, we will change the oldest uplink version to
the one that's using only new endpoints.
2. Disable tls certificate verification in uplink
3. Use storj-sim version control server instead of production one
4. Skip uplink version v1.3.x due to bug in that release
Change-Id: I926a6bb9829cb7181ee752437cdcb67e59197fe0
This PR fixes below issues:
1. remove concurrent installation for various versions
We were doing this to decrease the amount of execution time the versions test.
However, it's returning incorrect exit code when there's an
installation failure.
Right now, we are only installing two versions of `storj-sim` and
the rest are only doing uplink cli installation. The performance of
this test should be hugely impacted by the setup step now.
2. only remove release settings instead of deleting the entire file
uplink CLI is referrencing `private/version` package. Therefore, we
cannot delete it
3. add back `GATEWAY_0_API_KEY` in storj-sim
In order to set up older version of uplink cli, we need access to
the gate way api key.
Change-Id: Ia3c37c197bd007b6e1f7c2bd71adde42181d46f0
Make metainfo.RSConfig a valid pflag config value. This allows us to
configure the RSConfig as a string like k/m/o/n-shareSize, which makes
having multiple supported RS schemes easier in the future.
RS-related config values that are no longer needed have been removed
(MinTotalThreshold, MaxTotalThreshold, MaxBufferMem, Verify).
Change-Id: I0178ae467dcf4375c504e7202f31443d627c15e1
branch
Currently, we are testing previous release version upgrading to latest
master on each master build
However, this behavior is only desired when the test is running on a
release branch.
Change-Id: Iaeb66f44951c9e4934ca3c8316d1e490d7958239
We are moving an error into rejectErr since its preventing storage nodes from being able to settle other orders.
Change-Id: I3ac97c340e491b127f5e0024c5e8bd9f4df8d5c3
We've had bizarre crashes for satellite and it's difficult to debug
stripped binaries. The only binary where stripping is useful, is uplink
cli. This change will increase uplink by 5MB.
Change-Id: I4d1dfd36452063c22e8471d99eec97f6de6167b8
Doing it at the ProcessOrders level was insufficient: the endpoints
make multiple database calls. It was a misguided attempt to only
have one spot enter the semaphore. By putting it in the endpoint
we can not only be sure that the concurrency is correctly limited
but it can be configurable easily.
Change-Id: I937149dd077adf9eb87fce52a1a17dc0afe96f64
Remove usage of --non-interactive flag. It is not provided (and
necessary) by the multitenant S3 gateway anymore.
ACCESS_KEY and SECRET_KEY env vars are not provided anymore as they are
not generated by the multitenant S3 gateway.
Change-Id: I3ecfb92110e31ae13977de3899dad273daae6c1e
We have configlock_test for checking changes so the separate script and
makefile target are not needed.
Change-Id: I2bbc1c21ad849c9b7ec8bba43c0e11e94e04f6a6
This PR adds the following items:
1) an in-memory read-only cache thats stores project limit info for projectIDs
This cache is stored in-memory since this is expected to be a small amount of data. In this implementation we are only storing in the cache projects that have been accessed. Currently for the largest Satellite (eu-west) there is about 4500 total projects. So storing the storage limit (int64) and the bandwidth limit (int64), this would end up being about 200kb (including the 32 byte project ID) if all 4500 projectIDs were in the cache. So this all fits in memory for the time being. At some point it may not as usage grows, but that seems years out.
The cache is a read only cache. When requests come in to upload/download a file, we will read from the cache what the current limits are for that project. If the cache does not contain the projectID, it will get the info from the database (satellitedb project table), then add it to the cache.
The only time the values in the cache are modified is when either a) the project ID is not in the cache, or b) the item in the cache has expired (default 10mins), then the data gets refreshed out of the database. This occurs by default every 10 mins. This means that if we update the usage limits in the database, that change might not show up in the cache for 10 mins which mean it will not be reflected to limit end users uploading/downloading files for that time period..
Change-Id: I3fd7056cf963676009834fcbcf9c4a0922ca4a8f
WHAT:
notification bar added to project dashboard page. It is shown when projects count limit is reached.
Create project button is removed after creating last available project
WHY:
inform user that their projects count limit was reached
Change-Id: If0d67148003be40cc9eb4d8b25cc17f8204008d4
This PR updates `uplink rb --force` command to use the new libuplink API
`DeleteBucketWithObjects`.
It also updates `DeleteBucket` endpoint to return a specific error
message when a given bucket has concurrent writes while being deleted.
Change-Id: Ic9593d55b0c27b26cd8966dd1bc8cd1e02a6666e
To prevent longlived unused connections, set the maximum time to 30 minutes to
prevent proxies and loadbalancers forcefully cutting the connection.
This helps in scenarios with low load/requests to a DB.
Change-Id: I7dba15ef97f6f6541e872a6fb1d3a9bbbfe5bb50
services
This PR adds a limiter on the amount of concurrent objects deletion can be handled so
we don't run out of memory.
Change-Id: Id2ce368af6f86845fcdfd34cb2f5e460efe9b272
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.
Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.
In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).
In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.
In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.
The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.
Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.
Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
Jira: https://storjlabs.atlassian.net/browse/USR-822
This the last step of dropping these 2 db tables. It also deletes all
code associate with them.
Change-Id: I8be840dc2a7be255cf6308c9434b729fe4d9391e
Add a config so that some percent of users require credit cards /
account balances
in order to create a project or have a promotional coupon applied
UI was updated to match needed paywall status
At this point we decided not to use a field to store if a user is in an
A/B
test, and instead just use math to see if they're in a test. We decided
to use MD5 (because its in Postgres too) and User UUID for that math.
Change-Id: I0fcd80707dc29afc668632d078e1b5a7a24f3bb3
Removes old project_bandwidth_rollups records that are no longer used.
Uses a retain months configuration to determine how many months to save. Current month cannot be removed.
Tests retainMonths=-1, 0, 2
Change-Id: Ia4be2546cdb28802427acf41ecd85ad66df3e62c
WHAT:
GTM added for partnered satellites sign up pages
csp values were extended to make GTM work at all:
1. googletagmanager.com for GTM script
2. google-analytics.com for GA script
3. hash was added to avoid using 'unsafe-inline' value in 'script-src' directive
Also config flag for GTM id was added
WHY:
Marketing team needs GTM and GA for their campaigns
Change-Id: Ibb2ace737feb971dda6c191599d479fe4a7af332
When a request comes in on the satellite api and we validate the
macaroon, we now also check if any of the macaroon's tails have been
revoked.
Change-Id: I80ce4312602baf431cfa1b1285f79bed88bb4497
As the tables that get cleaned up by this job get a lot of inserts and deletes over the course of a day, the autovacuum process on PostgreSQL struggles fairly easily/quickly.
Due to its limitation, it can only delete 180,000,000 tuples in one go, before it has to rescan the entire table/index.
With the current load, the most busy satellites accumulate about 1,000,000,000 tuples per day (consumed_serials). With our current 24h interval that results in ~6-7 scans, slowing the entire database down for a quite long time.
This PR reduces the interval to 4 hours, which under a constant load, results in less than 180,000,000 entries per run.
That way, we do not scan twice for only a small gain over said amount. Reducing the interval further would also increase the DB load unnecessary, as each run scans the entire tables at least once.
For future reference, we might need to adjust the interval, if the load is significantly changing.
Change-Id: I18fdd45d93d468cff126e719c8380c29a49f43dd
We removed the ability to change satellite address in for uplink cli v1.6.3. Therefore we will skip that version for now
Change-Id: I0f78cfe27b51fd6cad571636ba38266f5f672d58
also remove the continuation support from the queue, otherwise
we may end up sequential scanning the entire table to get
a few rows at the end.
then, in the core, instead of looping both to get a big enough
batch inside of the queue, as well as outside of it to ensure
we consume the whole queue, just get a single batch at a time.
also, make the queue size configurable because we'll need to
do some tuning in production.
Change-Id: If1a997c6012898056ace89366a847c4cb141a025
WHAT:
1. updated verification page URL in config
2. added list of partnered satellites to config
3. added logic for satellites dropdown on new signup/login pages
WHY:
1. signup/login flow was reworked in tardigrade.io repo (iframe removed, new pages etc.)
2. new config flag was added to check if satellite name matches at least one member of partnered satellites list to redirect user to verification page
3. new pages will have dropdown with partnered satellites list. Appropriate logic was added.
Change-Id: I33399ab66ca31f07b297a433f6b1f41da4cb6e66
The current satellite config lock code relies on bash scripts and
gnu diff, it must be run as root and hence it typically requires
docker. The old version will be removed at a later date..
I tried for several hours to run directly against cmdSetup() in
cmd/satellite/main.go, to avoid the ctx.Compile() call. I had no
luck.
Change-Id: I0a4888421e743b436d32b6af69d04759d7816751
Also distinguish the purpose for selecting nodes to avoid potential
confusion, what should allow caching and what shouldn't.
Change-Id: Iee2451c1f10d0f1c81feb1641507400d89918d61
