Clumped segments (segments with multiple pieces on the same subnet) may
need repair, but the clumped pieces are considered retrievable and we
don't need to call such segments irreparable.
We do want to know where they're coming from, though, if we can, because
we are seeing more than expected.
Change-Id: I41863b243f4bb007ef8929191a3fde1562565ef9
The project member invitations table has been modified to contain a
column for the ID of the user who sent the invitation. This ID is
required for us to return information about the inviter to the
satellite frontend.
References #5855
Change-Id: I928d987a8db2340f731ca65ce30173d4f90a9837
The query for GetNodesNetworkInOrder is causing far too much load on the
database. Since it is not critical that the repair checker have
perfectly up-to-date node network information, we can use a cache
instead.
Change-Id: I07ad45bfdeb46529da093941a06c2da8a00ce878
87d0789691 replaces offset usage with cursors.
But to continue the interation from a specific cursor, we need to iterate over ordered records.
(at least this is what I understood based on the failing tests)
87d0789691
Change-Id: Ic4da3a7c5f03386dd4c373c05102f05871900a3a
We will remove segments loop soon so we need first to move
Segment definition to rangedloop package.
https://github.com/storj/storj/issues/5237
Change-Id: Ibe6aad316ffb7073cc4de166f1f17b87aac07363
This change updates the replacer in satellite/satellitedb/dbx/gen/main.go
to work with an updated dbx.
Change-Id: I08e89d6d27e6f1d435416105fe5f622009add7ad
* Don't use rpcstatus.Unknown as an indicator of dial failure; instead,
GetShare now indicates with a per-share field where a failure happened
(DialFailure, RequestFailure, NoFailure). Use that information in
Verify() to determine how to treat the source node.
* Add a test that replaces a storage node with a black hole, so that
connections there will always time out. Make sure we handle that case
correctly.
Refs: https://github.com/storj/storj/issues/5632
Change-Id: I513a53520fb48b7187d4c4d7e14e01e2cfc0a721
Stripe invoice project records while listing are causing full table scan
because of OFFSET caluse. This change is refactoring query to list using
cursor.
Change-Id: I6b73b9b2815173d7ef02cf615408778476eb3b7b
We have method which is getting projects owned by specific user but it's
causing full table scan because we don't have index on owner_id column.
Change-Id: Icb71c9ac5b73104a52241ed8ba126c995c10811f
The string check previously used to check for constraint errors is now
replaced with dbx.IsConstraintError check.
Change-Id: I553ccd69e3c02b6b54441bd9f929b85a155eaf00
Fix an error that can occur when processing multiple invoices for the same user in a single invoice cycle when the user is paying with Storj tokens.
Change-Id: I54af8c7dde1965d994f687fdfc4e4b5ef4deeb2d
w.Header().Set needs to be called before WriteHeader,
because WriteHeader sends all the headers and calls to
Set won't have any effect afterwards.
Change-Id: Ia6b1c5e2cd54201a6c3980d63de04a0095b2db9a
The console DB cleanup chore has been extended to remove old project
member invitation records.
Resolves#5816
Change-Id: Id0a748e40f5acf03b9b903265c653b072846ba19
There is still a reference to partner_id in a query, which we cannot
move until dropping the "not null" constraint for it. This change adds
that migration.
Related to https://github.com/storj/storj/issues/5432
Change-Id: I98802a6e1bd59f3d9214de3db6688d9daf664a70
A chore responsible for purging data from the console DB has been
implemented. Currently, it removes old records for unverified user
accounts. We plan to extend this functionality to include expired
project member invitations in the future.
Resolves#5790
References #5816
Change-Id: I1f3ef62fc96c10a42a383804b3b1d2846d7813f7
This change makes the error thrown when adding an existing member to a
project readable.
Issue: https://github.com/storj/storj/issues/5840
Change-Id: I4269495f9b7b09c77fbf1af1fc605e5c95bd7cbf
This change adds the user's passphrase prompt setting to the
/account/settings endpoints.
Issue: https://github.com/storj/storj/issues/5616
Change-Id: I48d470d49e82096fd090b74da323b279e342546e
Allow a longer encrypted key length to reduce 'key length is too big'
errors in gateway-mt. Gateway is enforcing an unencrypted key length
of 1024 bytes but when encrypted some keys are exceeding the current
limit.
updates https://github.com/storj/gateway-mt/issues/335
Change-Id: I861a2313e558c9f7d39569d21c7a3d429c83575c
Ensure that the value of "pricing packages enabled" flag on frontend is
the same as what is configured on the backend.
Change-Id: Id78771800a4973ebd3ad4e22f1953f6f71c75dd4
The "object not found" included an additional prefix "metabase:", which
broke uplink error message detection.
Ideally, changing an internal error message shouldn't break the uplink.
Change-Id: I5ce7789cc11742d3435af1ec555bc96927f1bedc
Current observer used with ranged loop is using massive amount of
memory because each range is generating separate set of bloom filters.
Each bloom filter can be up to 2MB of memory. That's a lot.
This change is initial change to reduce used memory by sharing bloom
filters between ranges and just synchronize access to them. This
implementation is rather simple and even naive but maybe it will be
enough without doing something more complex.
https://github.com/storj/storj/issues/5803
Change-Id: Ie62d19276aa9023076b1c97f712b788bce963cbe
Remove the command to apply free tier coupons from the generate invoices
command. Applying free tier coupons should instead be done outside the
normal time window for invoice generation to save time during the
invoicing cycle.
Change-Id: If8fecc558411d5a6fff9d5689143d72f3b709e55
This is refactor/cleanup change before I will start working on adding
separate GC observer with optimized memory consumption.
https://github.com/storj/storj/issues/5803
Change-Id: I854cb3797802a32942c25f2765dbb72be88bacbd
This change immplements methods for interacting with the project member
invitations table.
Resolves#5766
Change-Id: I0090c50f9fde5bcdae4ebdaa72cdcaa84d341b54
A table for storing pending project member invitations has been added.
This table is required to satisfy our new project invitation UX revamp.
References #5766
Change-Id: I6f948de66ed5b4dc81532564958ff7f48533cad2
Add a new billing command that will convert stripe customer balances into invoice items so that the charges can be processed normally by the invoicing workflow.
Change-Id: Iaa8350e7aca80a0f14e94eb8ef8b7d6ce0b5b3b8
Fixed nil pointer dereference panic.
Updated naming conventions so that PUT request and GET response bodies are the same (bandwidth, storage and segment).
Allowed usage of notations like 150GB, 2TB for storage and bandwidth limits.
Updated tests.
Issue:
https://github.com/storj/storj/issues/5674
Change-Id: I7ac27c00721a9b4bf507afa34cb05c4475a809ad
This change adds more tests to the autofreeze chore and the freeze
service according to the testplan linked in the issue below.
Issue: https://github.com/storj/storj/issues/5738
Change-Id: Ib2afaa283961b2e7ef6fb6e5613ee083ac7d79eb
This field is deprecated in favor of UserAgent; Removing these
references is the final step necessary before dropping the columns from
the database.
https: //github.com/storj/storj/issues/5432
Change-Id: I3a6619170dcf382f82dc8eddb73b6547eaf636f0
Currently when error.html is not available, we should still start the
server and fallback to some simpler implementation. This template does
not require any external assets.
Change-Id: I76b660db988987e1e9ebadd966f60e149f26ff24
lrucache is now using time2 package and we can make expiration
test without using time.Sleep.
https://github.com/storj/storj/issues/5788
Change-Id: I48f2693c3db78fcf4e30e618bb3304be3625100c
Remove the extra prepended '0x' from the wallet address.
Remove prepended '0x' from the transaction ID.
Change-Id: Id215536915fba62cc348aa2c3356ecc7898d68a2
This change separates hubspot form submission for personal and business
accounts, with new company name and storage needs fields.
Issue: https://github.com/storj/storj-private/issues/220
Change-Id: Ieb0fb64f87614c7327dc5f894140fb8a54ededa0
New SQL queries for GetProjectObjectsSegments turns out to introduce
full table scan. This is fix for this problem.
Change-Id: Ieac22aafeb780168523a97e27c9283c9ac6a24c8
This change reverses behavior added by 45d5a93 that made the server
return a 500 status code when the index.html file for the satellite
frontend couldn't be loaded. The presence of this file was previously
intentionally optional.
Change-Id: I875a171a37b735c3523eb5b13d83f084f1781053
Previously, we evaluated index.html as a template in order to insert
frontend config values into meta tags. Now that the frontend fetches
its config through the satellite API, this is no longer necessary.
Resolves#5494
Change-Id: Ic98507c5e16cd80317bd9c31d4b55abda0dd7e34
The test for the admin API's OAuth authorization behaviour has been
modified to use a random available port given by the system rather than
a hardcoded one. This prevents the test from accidentally using a port
that is already in use.
Change-Id: Iae017b2f397ae53f1a006bae1d0578d2ddfd0875
References to the meta tag config values in Vue components have been
modified to instead refer to the frontend config fetched through the
satellite API.
References #5494
Change-Id: I00ecf81d4a0ba6bd07c827cecb2c689d923d67c0
The project charge information used by the satellite frontend to
compute project cost estimates has been updated to account for
configured egress discounts.
Resolvesstorj/storj-private#215
Change-Id: Ic90b015d65f5bea104ac96fb0cea545b3f9f1f8f
Query to list (with pages) stripe customers were doing full table scan
because Offset clause was used. This refactoring changed listing to
use cursor instead Offset.
Change-Id: I14688e6c533bc932ba0d209a061562f080b4cf54
Invoicing has been modified to account for an egress discount ratio,
which specifies the fraction of the amount of data stored that egress
usage should be discounted.
The egress discount ratio measures discounted egress units per storage
unit-months, so a ratio of 0.5 with 2 MB-months of storage would
discount 1 MB of egress.
Resolvesstorj/storj-private#224
Change-Id: I43d7d6719391c303712c082709aef77249c65f62
This change allows for specifying the ratio of free egress per unit
of storage within a price override configuration.
References storj/storj-private#215
References storj/storj-private#224
Change-Id: Ib1c79f77ec8bb11dd5b2f9dace13800b0b3ce942
No component has referenced this page since 9dab10e and we do not
anticipate this changing, so this page can be safely removed.
Resolves#5768
Change-Id: I57acb5e4d0977d74df46aaf67606a19ec0f10bcf
We automatically start a chore to check whether the blobstore is
writeable and readable, however, we don't want to fail the tests due to
that reason. Usually we want to test some other failure.
There probably should be some nicer way to achieve this, but this is an
easier fix.
Change-Id: I77ada75329f88d3ea52edd2022e811e337c5255a
- only applies to storjscan transactions
- applies a 10% bonus by default
- bonus transactions have a distinct source "type" to allow for
filtering on the frontend
Fixes: https://github.com/storj/storj/issues/5702
Change-Id: I32d65f776c58bcb41227ff5bc77a8e4cb62a9add
This another account endpoint; patch /auth/account/settings. to handle
changing a user's settings, including their session timeout config.
Issue: https://github.com/storj/storj/issues/5560
Change-Id: I747b4e919cf7cef7c867ac9d282837ef51bed67e
We avoid putting more than one piece of a segment on the same /24
network (or /64 for ipv6). However, it is possible for multiple pieces
of the same segment to move to the same network over time. Nodes can
change addresses, or segments could be uploaded with dev settings, etc.
We will call such pieces "clumped", as they are clumped into the same
net, and are much more likely to be lost or preserved together.
This change teaches the repair checker to recognize segments which have
clumped pieces, and put them in the repair queue. It also teaches the
repair worker to repair such segments (treating clumped pieces as
"retrievable but unhealthy"; i.e., they will be replaced on new nodes if
possible).
Refs: https://github.com/storj/storj/issues/5391
Change-Id: Iaa9e339fee8f80f4ad39895438e9f18606338908
We would like to have ability to limit burst uploads to the single
object (the same location). This change we are limiting such upload to
one per second.
Change-Id: Ib9351df1017cbc07d7fc2f846c2dbdbfcd3a360c
The blobstore implementation is entirely related to storagenode, so the
rightful place is together with the storagenode implementation.
Fixes https://github.com/storj/storj/issues/5754
Change-Id: Ie6637b0262cf37af6c3e558556c7604d9dc3613d
add ability to sort api keys on the access management page by ascending
or descending name or creation date. Additionally, edit api keys query
when ordering by name to order by lower(name) so names starting with
capital letters are not treated differently from lower case when
ordering.
Change-Id: I81dbb87587a24fb7097313f76bad116b1f20d306
With this change we are replacing parsing code with existing go-redis
util.
We also switch redis client to version 9.
Change-Id: Ie4a651e3ae6960e68958c690873925d319b70e10
The following tests should be made less flaky by this change:
- TestFailedDataRepair
- TestOfflineNodeDataRepair
- TestUnknownErrorDataRepair
- TestMissingPieceDataRepair_Succeed
- TestMissingPieceDataRepair
- TestCorruptDataRepair_Succeed
- TestCorruptDataRepair_Failed
This follows on to a change in commit 6bb64796. Nearly all tests in the
repair suite used to rely on events happening in a certain order. After
some of our performance work, those things no longer happen in that
expected order every time. This caused much flakiness.
The fix in 6bb64796 was sufficient for the tests operating directly on
an `*ECRepairer` instance, but not for the tests that make use of the
repairer by way of the repair queue and the repair worker. These tests
needed a different way to indicate the number of expected failures. This
change provides that different way.
Refs: https://github.com/storj/storj/issues/5736
Refs: https://github.com/storj/storj/issues/5718
Refs: https://github.com/storj/storj/issues/5715
Refs: https://github.com/storj/storj/issues/5609
Change-Id: Iddcf5be3a3ace7ad35fddb513ab53dd3f2f0eb0e
Components related to project usage costs have been updated to show
different estimations for each partner, and the satellite has been
updated to send the client the information it needs to do this.
Previously, project costs in the satellite frontend were estimated
using only the price model corresponding to the partner that the user
registered with. This caused users who had a project containing
differently-attributed buckets to see an incorrect price estimation.
Resolvesstorj/storj-private#186
Change-Id: I2531643bc49f24fcb2e5f87e528b552285b6ff20
This combines the ListStreamPositions and GetSegmentByPosition
calls with a ListSegments call that now knows how to return
only the segments within a Range, just like ListStreamPositions.
It would theoretically be possible to also include the
GetObjectLastCommitted call by having it do one of three
queries based on the incoming request range, but that would
mean duplicating the data for the object in every single
row that is returned for each segment in the range.
One gross thing that ListSegments has to do now is update the
first segment returned with the information from any ancestor
segment because GetSegmentByPosition used to do that. It only
updates the first segment so that it doesn't do O(N) database
queries. It seems difficult to have it do a single query to
update all of the segments at once. I'm not certain this change
should be merged on this basis alone.
This change has made me think a couple of things should happen:
1. Server side copy with ancestor segments strikes again
making the code less clear and potentially more buggy
or inefficient for a rare case (empirically <0.1%)
2. The download code requests individual segments from
the satellite lazily as part of its download which
requires the satellite telling it the locations of
all of the segments which requires the satellite
querying the locations of all of the segments. Instead
the download RPC could return the orders for all of
the segments for a range and the download code could
issue N download calls rather than 1 download call and
N get segment calls. I believe both sides of the code
paths would be simpler and more efficient this way.
3. In looking at the timing information for downloads when
testing this, we really need to focus on getting the
auth key and bandwidth limit verification times down.
Here's the timing I saw:
- 42ms: validate auth
- 52ms: bandwidth usage checking
- 14ms: get object info
- 26ms: get segment position info
- 26ms: getting the first segment full info
- 20ms: unaccounted for by spans
- 6ms: creating the orders
This change will remove 26ms, but there's a good 90ms
in just validation. With improved semantics hitting the
database only once and improved validation, a download
rpc taking ~30ms seems doable compared to our current
~200ms.
Change-Id: I4109dba082eaedb79e634c61dbf86efa93ab1222
Get bucket was returning a "bad request" HTTP status code when the
bucket doesn't exists.
We have to return HTTP "Not found" status code.
Change-Id: If717d99276b02a1e59a9b71ebc909bd6d8d9390b
Instead of granting a coupon when purchasing a package, grant credit.
This changes paymentsconfig.PackagePlan to use credit amount rather than
coupon ID. Add additional check to see if a paid invoice with the
description exists. If so, don't create and pay another invoice.
Change-Id: I81df24984c519c773db5fc8e9070bd7797070ec2
Add and implement interface to manage customer balances. Adds ability to
add credit to a user's balance, list balance transactions, and get the
balance.
Change-Id: I7fd65d07868bb2b7489d1141a5e9049514d6984e
Invoicing-related payment service methods have been modified to send
Stripe API requests in parallel.
Additionally, randomness has been added to the Stripe backend wrapper's
exponential backoff strategy in order to reduce the effects of the
thundering herd problem, which arises when executing many simultaneous
API calls.
Resolves#5156
Change-Id: I568f933284f4229ef41c155377ca0cc33f0eb5a4
Add columns package_plan and purchased_package_at to stripe_customers
table and add methods to update and select these values from console
service and payments accounts.
Change-Id: I1e89909055cc3054bfb7baa33c9dca3dfdc7336e
Implementing https://github.com/storj/storj/issues/5702 means adding a
bonus billing transaction for each storjscan transaction being recorded.
To do this idempotently, we need to the ability to for both the
storjscan and bonus transaction to be committed together.
This change updates the billing database to allow multiple billing
transactions to be inserted under the same database transaction.
Change-Id: I941864f47fc64d65aab076eec2e96fd04fcc7aac
A row in the new `user_settings` table does not always exist for a user,
even if they have been around for a while.
Since `user_settings` is now what defines the state of a user's
onboarding flow, prior to this fix, even old users would receive the
onboarding flow again.
This change appropriately updates `user_settings` for users who already
have projects, and thus have already gone through the onboarding flow. A
brand new user will still be navigated to the beginning of onboarding.
Change-Id: Ie745d280f6b8094ec60c200c2dca8d018d51f7d1
FileWalker implements methods to walk over pieces in
in a storage directory.
This is just a refactor to separate filewalker functions
from pieces.Store. This is needed to simplify the work
to create a separate filewalker subprocess and reduce the
number of config flags passed to the subprocess.
You might want to check https://review.dev.storj.io/c/storj/storj/+/9773
Change-Id: I4e9567024e54fc7c0bb21a7c27182ef745839fff
By accident query to get latest table stats was ordered by 'row_count'
column instead 'create'. We need latest stats so we need ordering by
creation time.
Change-Id: I9d0a0edda8bab59c3d96b7a15cd6502ed51633fc
This flag was in general one time switch to enable versions internally.
New we can remove it as it makes code more complex.
Change-Id: I740b6e8fae80d5fac51d9425793b02678357490e
We want to eliminate usages of LoopSegmentEntry.Pieces, because it is
costing a lot of cpu time to look up node IDs with every piece of every
segment we read.
In this change, we are eliminating use of LoopSegmentEntry.Pieces in the
node tally observer (both the ranged loop and segments loop variants).
It is not necessary to have a fully resolved nodeID until it is time to
store totals in the database. We can use NodeAliases as the map key
instead, and resolve NodeIDs just before storing totals.
Refs: https://github.com/storj/storj/issues/5622
Change-Id: Iec12aa393072436d7c22cc5a4ae1b63966cbcc18
The default price threshold has been changed to 10000 cents. The help
text has also been modified to clarify that this value is in cents.
Change-Id: I3b605056c860a3afef7202950180bc8b863fe16a
A debug log has been added to the autofreeze chore to show numbers of
invoices, users involved, users frozen, users warned and users bypassed
due to larger than config amount owed.
Issue: https://github.com/storj/storj/issues/5700
Change-Id: I4e628606fe234b6d239b76167a4781ca9e276308
This handles cases where a user is warned and triggers payment for their
account. Previously, only a frozen account will trigger this payment,
and will be unfrozen on successful payment. Now, accounts in warning
state trigger payments and are removed from that state on successful payment.
Issue: https://github.com/storj/storj/issues/5691
Change-Id: Icc2107f5d256657d176d8b0dd0a43a470eb01277
Previously, our code produced a Go panic when attempting to index an
empty slice of bucket user agent entries. A length check has been
added to ensure that the slice is not accessed beyond its bounds.
Change-Id: I904ca275b934be1b05393a45d99ff415dcafc926
