The current satellitedb.dbx has grown quite big over time.
Split the single file into multiple smaller ones.
Change-Id: I8d6ca851b834ac60820aff565906f04aab661875
We have to wait until the slowest node is done being tested before we
can move on to the next of segments. Since the slowest node can be
arbitrarily slow, we'll set a timeout and treat too-slow nodes as
temporarily offline.
Change-Id: I80fe865dd4e8f826700430fb0140c2d3aefca381
When we are verifying pieces by downloading the first byte, if we
encounter a timeout, treat the node as if we failed to connect to it,
and log the error once instead of twice.
Change-Id: I70602d554183c98f1213f3ffb1bfec41100ea0e7
This csv file was being closed as soon as the service was created.
All subsequent writes to the closed file handle produced errors,
which were logged but otherwise ignored.
Instead, we would like the file to remain open and writable, until
the service is destroyed.
Change-Id: Ib29944d25b2f5b2d0f90fdbdcde44fea8d769321
Update get usage-limits, daily-usage and salt endpoints to support
both project-ID and project-PublicID.
Issue: https://github.com/storj/storj/issues/5411
Change-Id: Iff0114a295d1a479b141bfffbfb31599844d1fc0
Update the delete API key by name and projectID to support project-ID
and project-publicID.
Issue: https://github.com/storj/storj/issues/5410
Change-Id: I3bd11b9c3ae1ad6ce662dfc18b42779d2e4edf9b
Add an observer to monitor ranged segment loop progress.
Tested by running the segment loop in storj-up and navigating to
http://<container>:11111/mon/stats and there is the entry:
rangedloop-live,scope=storj.io/storj/satellite/metabase/rangedloop numSegments=364523630000.000000
part of https://github.com/storj/storj/issues/5223
Change-Id: If3d2774d2f17f51eac86f47c6dda1fb8ad696dfe
The copyFile method has some safeguards to ensure that the multipart
write is aborted. This is accomplished by always calling abort on the
MultiWriteHandle when the copy is finished, whether or not there was a
failure or it was successfully committed. If the copy was committed,
then this RPC is a no-op on the metainfo server.
Regardless, the calls to abort to constitute an additional RPC to the
satellite for no benefit. This is exacerbated by the fact that the code
currently ends up calling abort twice.
This change updates the libuplink-backed MultiWriteHandle implementation
to not call abort if the write is committed and vice-versa. This
eliminates the two wasteful RPC calls.
Change-Id: I13679234f6f473e9a93179e6791fb57eac512f25
Removing all references to column last_verification_reminder which is to be removed, due to new column verification_reminders
Issue: https://github.com/storj/storj/issues/4560
Change-Id: I7c9a426e946c7aed58e62c1eef80629daf6b1272
Support interruption of the ranged segment loop through context.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
Add public ID field to graphql Project so it can be used on the front
end. Additionally public_id needed to be added to the ListByOwnerID sql
query which is called by graphql OwnedProjectsQuery.
github issue: https://github.com/storj/storj/issues/5408
Change-Id: I2ec04363c20493dc0f9c70b6d1610f724f18ec2f
Previously, if any pieces are still on disqualified nodes, this tool
would treat those pieces as fine (if the disqualified node is still
online) or temporarily unavailable (if the disqualified node is
offline). Instead, we should treat such pieces as lost.
This also fixes a slight problem with the code that handles a broken
alias. This is not likely to happen, but if we do see an alias that is
not in the alias map, we return an error instead of nil.
Change-Id: Ib4e2e729ef0535dd7bd9ce2f621680d9f959891c
This testplan is going to cover the changes to allow for scaling audit workers. It will go over the scaling audit worker design doc found under blueprints.
Co-authored-by: Antonio Franco (He/Him) <antonio@storj.io>
Slightly modified the warning message on the "Add STORJ Tokens" modal;
And added a warning for zkSync.
Issue: https://github.com/storj/storj/issues/5418
Change-Id: I206e7b493c3fe04c69a3815a5f03bd6a07cfceae
Wire up duration measurement of observers with monkit.
Tested by attaching a SleepObserver, starting the rangedloop in storj-up
and navigating to http://<container>:11111/mon/stats. It reports the
following statistic:
completed-observer-duration,observer=*rangedlooptest.SleepObserver,scope=storj.io/storj/satellite/metabase/rangedloop duration=10.000117
Change-Id: Ief131d34001dd5d3ba1d7be6f161986e1f66440d
Before we introduced objects versions internally move operation was
always failing when under target location object exists. But then we
had only single version 1 all the time. With versions different than 1
we need to check all existing objects under target location.
To be backward compatible with our API new logic looks like this:
* if there is no object under target location use source object version
as target version
* if there are only pending objects find first free (highest) version
which could be used to move object there
* if there is committed object under target location reject move
operation
Fixes https://github.com/storj/storj/issues/5403
Change-Id: I717f3e7c42470b406287d6ec335f6f057d3fc3b5
Because it was originally intended to work on only a few pieces from
each segment at a time, and would frequently have reset its list of
online nodes, segment-verify has been taking nodes out of its
onlineNodes set and never putting them back. This means that over a long
run in Check=0 mode, we end up treating more and more nodes as offline,
permanently. This trend obfuscates the number of missing pieces that
each segment really has, because we don't check pieces on offline nodes.
This commit changes the onlineNodes set to an "offlineNodes" set, with
an expiration time on the offline-ness quality. So nodes are added to
the offlineNodes set when we see they are offline, and then we only
treat them as offline for the next 30 minutes (configurable). After that
point, we will try connecting to them again.
Change-Id: I14f0332de25cdc6ef655f923739bcb4df71e079e
This change implements the ranged loop observer to replace the audit
chore that builds the audit queue.
The strategy employed by this change is to use a collector for each
segment range to build separate per-node segment reservoirs that are
then merge them during the join step.
In previous observer migrations, there were only a handful of tests so
the strategy was to duplicate them. In this package, there are dozens
of tests that utilize the chore. To reduce code churn and maintenance
burden until the chore is removed, this change introduces a helper that
runs tests under both the chore and observer, providing a pair of
functions that can be used to pause or run the queueing function.
https://github.com/storj/storj/issues/5232
Change-Id: I8bb4b4e55cf98b1aac9f26307e3a9a355cb3f506
This ensures that empty trash and restore trash cannot run at the same
time.
Fixes https://github.com/storj/storj/issues/5416
Change-Id: I9d2e3aa3d66e61e5c8a7427a95208bb96089792d
The WithExists methods previously were not writing problematic pieces to
problem-pieces.csv. With this change, they will.
Change-Id: I51eadd3d8f4299e1efa787c9266a7aacfa525eb3
When this branch is followed, `audit.OutcomeFailure` is returned, and
`MarkNotFound()` is immediately called again (in
`(*NodeVerifier).Verify()`). Calling `MarkNotFound()` twice for the same
piece is not correct.
Change-Id: I1a2764bc32ed015628fcd9353ac3307f269b4bbd
It may help to know how much faster these methods are than the
alternative (asking nodes for each piece in turn).
Change-Id: Ieb7c963f62b662f72c84a49de8a09c065c14f782
It was ok as it was, but since we want to keep a close eye on progress
while the tool is running, it will help to have results written to the
output file immediately instead of after the buffer is full or the
program exits.
Change-Id: Ie027f05771a637afb06969ec775cd32b142b7635
Add design for identifying and processing node events and sending
notifications to node operators.
github issue: https://github.com/storj/storj/issues/5039
Change-Id: I63341867207c28334bb025c6a104692ce2a16edd
This change is similar to
https://review.dev.storj.io/c/storj/storj/+/7687 but applied when
uploading from stdin with parallelism > 1.
Currently, the paralellism from stdin scales up to 3 or 4, but not
greater than that. If we buffer the content from stdin more aggressively
the parallelism scales to higher levels and reaches the performance of
reading directly from a file.
Change-Id: I1f447686a88074882709992ee6d52dd262e220fb
When Check == 0 (check all pieces), there is nearly always a piece left
in the retry count, so most segments get logged in segments-retry.csv.
This change makes it so we require retry>5 before adding to
segments-retry.csv (only in the check==0 case).
Change-Id: Iaea523c27eb777e3c248c27c7ef5effe77ae54cf
This new advanced flag configures libuplink to store in-memory the
erasure-coded pieces that are temporarily created during upload.
By default, libuplink writes the erasure-coded pieces as temp files on
the disk, but this results in additional IOPS that affect the
performance in hot-rodded scenarios.
If the erasure-coded pieces are kept in-memory and the system has enough
RAM, the upload speed may be boosted with 20-30%.
The flag is added as "advanced" as we don't recommend it by default.
Co-authored-by: Stefan Benten <mail@stefan-benten.de>
Change-Id: Icc54f03b6c0bc27c97126f6f1d22748d21a15959
add triggerAttemptPaymentIfFrozen to check if the account is frozen
and if frozen, will trigger an attempt to pay outstanding invoices
Issue: https://github.com/storj/storj/issues/5398
Change-Id: I0da6a982e2da4204dee219d98ce2d503cbbb6f8e
The tests are forked from the chore tests with slight adaptations for
being run against the ranged loop. I also moved a benchmark for the
database from chore_test.go to db_test.go.
The pathcollector is reused as a rangedloop.Partial.
https://github.com/storj/storj/issues/5234
Change-Id: I56182031d133812a9f4d4a433c01b9150af39f31
* better error handling when Exists method is not avaialble on SN
* more optimal processing of response from Exists method
Change-Id: I6d61c09473e9f5ab76a4601720e8bd520767f4c2
Track duration of all segment loop observers. Factor out functions to
reduce size.
Still need to send the measurements out via monkit.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
