Since we are sharing the reporting logic between repair and audit. We
need to remove metric reporting logic in reporter.
Change-Id: Ib87295ab19079329e7438327d785a7f5c21d3b21
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
In most situations where we would not get enough shares to complete
an audit, something has probably gone wrong like a forgotten delete,
and nodes should not be failed. We have an alert when this occurs.
Check the logs to see what happened. If we decide the nodes should
get audit failures, we can do it manually.
Change-Id: Ib6e408082048d31197c37ebfd7f9031135fc938f
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
At some point we might try to change original segment RS values and set Pieces according to the new values. This change adds add NewRedundancy parameter for UpdateSegmentPieces method to give ability to do that. As a part of change NewPieces are validated against NewRedundancy.
Change-Id: I8ea531c9060b5cd283d3bf4f6e4c320099dd5576
We now have the piece hashes verified for all segments on all production
satellites. We can remove the code that handles the case where piece
hashes are not verified. This would make easier the migration of
services from PointerDB to the new metabase.
For consistency, PieceHashesVerified is still set to true in PointerDB
for new segments.
Change-Id: Idf0ccce4c8d01ae812f11e8384a7221d90d4c183
Make metainfo.RSConfig a valid pflag config value. This allows us to
configure the RSConfig as a string like k/m/o/n-shareSize, which makes
having multiple supported RS schemes easier in the future.
RS-related config values that are no longer needed have been removed
(MinTotalThreshold, MaxTotalThreshold, MaxBufferMem, Verify).
Change-Id: I0178ae467dcf4375c504e7202f31443d627c15e1
A year ago we made the audit service deleting expired segments.
Meanwhile, we introduced an expired deletetion sub-service in the
metainfo service which sole purpose is deleting expired segments.
Therefore, now we are removing this responsibility from the audit
service. It will continue to avoid reporting failures on expired
segments, but it would not delete them anymore.
We do this to cleanup responsibilities in advance of the metainfo
refactoring.
Change-Id: Id7aab2126f9289dbb5b0bdf7331ba7a3328730e4
This preserves the last_ip_and_port field from node lookups through
CreateAuditOrderLimits() and CreateAuditOrderLimit(), so that later
calls to (*Verifier).GetShare() can try to use that IP and port. If a
connection to the given IP and port cannot be made, or the connection
cannot be verified and secured with the target node identity, an
attempt is made to connect to the original node address instead.
A similar change is not necessary to the other Create*OrderLimits
functions, because they already replace node addresses with the cached
IP and port as appropriate. We might want to consider making a similar
change to CreateGetRepairOrderLimits(), though.
The audit situation is unique because the ramifications are especially
powerful when we get the address wrong. Failing a single audit can have
a heavy cost to a storage node. We need to make extra effort in order
to avoid imposing that cost unfairly.
Situation 1: If an audit fails because the repair worker failed to make
a DNS query (which might well be the fault on the satellite side), and
we have last_ip_and_port information available for the target node, it
would be unfair not to try connecting to that last_ip_and_port address.
Situation 2: If a node has changed addresses recently and the operator
correctly changed its DNS entry, but we don't bother querying DNS, it
would be unfair to penalize the node for our failure to connect to it.
So the audit worker must try both last_ip_and_port _and_ the node
address as supplied by the SNO.
We elect here to try last_ip_and_port first, on the grounds that (a) it
is expected to work in the large majority of cases, and (b) there
should not be any security concerns with connecting to an out-or-date
address, and (c) avoiding DNS queries on the satellite side helps
alleviate satellite operational load.
Change-Id: I9bf6c6c79866d879adecac6144a6c346f4f61200
The VerifyPieceHashes method has a sanity check for the number pieces to
be removed from the pointer after the audit for verifying the piece
hashes.
This sanity check failed when we executed the command on the production
satellites because the Verify command removes Fails and PendingAudits
nodes from the audit report if piece_hashes_verified = false.
A new temporary UsedToVerifyPieceHashes flag is added to
audits.Verifier. It is set to true only by the verify-piece-hashes
command. If the flag is true then the Verify method will always include
Fails and PendingAudits nodes in the report.
Test case is added to cover this use case.
Change-Id: I2c7cb6b12029d52b2fc565365eee0826c3de6ee8
Jira: https://storjlabs.atlassian.net/browse/PG-69
There are a number of segments with piece_hashes_verified = false in
their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. Most probably, this happened due to a bug we had in the
past. We want to verify them before executing the main migration to
metabase. This would simplify the main migration to metabase with one
less issue to think about.
Change-Id: I8831af1a254c560d45bb87d7104e49abd8242236
* The audit worker wants to get items from the queue and process them.
* The audit chore wants to create new queues and swap them in when the
old queue has been processed.
This change adds a "Queues" struct which handles the concurrency
issues around the worker fetching a queue and the chore swapping a new
queue in. It simplifies the logic of the "Queue" struct to its bare
bones, so that it behaves like a normal queue with no need to understand
the details of swapping and worker/chore interactions.
Change-Id: Ic3689ede97a528e7590e98338cedddfa51794e1b
satellite.DB.Console().Projects().GetAll database query
can be replaced with planet.Uplinks[0].Projects[0].ID
Change-Id: I73b82b91afb2dde7b690917345b798f9d81f6831
If a segment is deleted, is modified, or expires during an audit, this
is not problematic, so we should not return errors. Functionally,
nothing changes, but our metrics around audit success rate will be
improved after this change.
Change-Id: Ic11df056b2c73894b67a55894bd4d58c00470606
* Do not swap the active audit queue with the pending audit queue until
the active audit queue is empty.
* Do not begin creating a new pending audit queue until the existing
pending audit queue has been swapped to the active queue.
Change-Id: I81db5bfa01458edb8cdbe71f5baeebdcb1b94317
TestVerifierSlowDownload would sometimes not have enough nodes finish in
the allotted deadline period. This increases the deadline and also does
not assert that exactly 3 have finished. Instead, in keeping with the
purpose of the test, it asserts that the slow download is never counted
as a success and is always counted as a pending audit in the final
report.
Change-Id: I180734fcc4a499420c75164bad6253ed155d87de
Instead of providing the database from outside to testplanet create it
inside and then allow wrapping and modifying it. This is more convenient
to use.
Change-Id: I9b8f69e6e0a19ff984b4e2bfe927c9100c77bc6c
- Previously, checkSegmentAltered only checked for segments that were replaced
but we want to detect all changes to a segment that occurred while an audit was being conducted.
- Fixed a bug where nodes failing audits during reverify for non-piece-hash-verified
segments were not being removed from containment mode.
- Filled in gaps in reverify testing to ensure nodes are properly removed from containment.
Change-Id: Icd96d369278987200fd28581395725438972b292
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
Remove direct dependency on uplink.RSConfig, this simplifies
moving the config file without introducing weird dependencies.
Change-Id: I7fd2a145401e0205d7047631df9d2810241efeec
* skip unknown errors (wip)
* add tests to make sure nodes that time out are added to containment
* add bad blobs store
* call "Skipped" "Unknown"
* add tests to ensure unknown errors do not trigger containment
* add monkit stats to lockfile
* typo
* add periods to end of bad blobs comments
* during audit Verify, return error and delete segment if segment is expired
* delete "main" reverify segment and return error if expired
* delete contained nodes and pointers when pointers to audit are expired
* update testplanet.Upload and testplanet.UploadWithConfig to use an expiration time of an hour from now
* Revert "update testplanet.Upload and testplanet.UploadWithConfig to use an expiration time of an hour from now"
This reverts commit e9066151cf84afbff0929a6007e641711a56b6e5.
* do not count ExpirationDate=time.Time{} as expired
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
