Current tally is calculating storage both for buckets and
storage nodes. This change is moving nodes storage
calculation to separate service that will be using
segment loop.
Change-Id: I9e68bfa0bc751c82ff738c71ca58d311f257bd8d
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Currently we did not limit the "as of system time" for iterating over
objects table. Using just an interval would cause problems with the
tests. That could be overcome skipping that interval for tests
altogether, however, we should probably test those more to ensure that
GC stays working as intended.
This is a safer code, however, maybe not as straigthforward as it could
be.
Change-Id: I374f77783b2af42bb6da846735ceea20a7ce5e60
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Add test with NotBefore and NotAfter restricted permission to verify that we don't have an access to bucket
Change-Id: I7ec98a5b02c0098ee7ec81034278398f4435f1cf
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Initially metabase was developed separately and it was useful to have a
separate environment flag for tests, however, it's more convenient to
use the same as rest of the testsuite.
Change-Id: Ia4d79be27ce5911cbae68d57cdf0b30f63459444
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
Rename the functions that are prefixed with 'New' which connect with
Redis by 'Open' to make clear that they perform network operations.
Change-Id: I1351e89a642e8e2c2586626646315ad0fb2c6242
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
Update the Redis dependency to use the last major production version.
The last version accepts a context parameter in all the network methods
so it allows us to pass it through them.
Change-Id: I34121b2ec3c2728602115c724933ad24c9e6e4fd
Move a specific interface & types used for testing to be a private
subpackage with a name that clearly identifies it for testing purpose.
Change-Id: I646cf3b6f0a3b518a6f9a125998dc5a02df02db6
This PR removes all back-end related referral program code including the
marketing portal.
We will have a separate PR for front-end code and database migration to
drop `offers` and `usercredits` table
Change-Id: If59f952cddfe0558a7dc03a0eac7cc1081517f88
allow disabling tcp/quic
In order to have more control of a server so that we can
simulate connection failures in `testplanet`, this PR changes
quic.Listener to accept an existing UDPConn instead of relying on the
quic-go library to create the UDPConn.
This PR also adds two flags on the `server.Config` struct to allow
enabling/disabling tcp/tls listener and quic listener. By default, they
are both set to true.
- `DisableTCPTLS`: internal flag, disables tcp/tls listener.
- `DisableQUIC`: hidden flag, disables quic listener
By making the `DisableQUIC` a hidden flag, it allows storagenode operators to
have the ability to disable quic traffic in case their set up can't work
with udp traffic.
Change-Id: I853b12435d988b9c41ad9b873fd57480d792e378
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
The rollup archiver chore moves bucket bandwidth rollups and
storagenode rollups that are older than a given duration
to two new archive tables.
Change-Id: I1626a3742ad4271bc744fbcefa6355a29d49c6a5
This PR introduces a new listener that can listen for quic traffic on
both storagenodes and satellites.
Change-Id: I5eb5bc82c37dde20d3be2ec8fa5f69c18fae0af0
We wanto have single uplink branch for standard and multipart-upload satellite but some tests are using helper methods from multipart. This change adds methods used by uplink test.
Change-Id: I82352ed56674ff7e8743b58061ba594018e78e3b
