We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Previously the object range was not used for calculating order limit.
This meant that even if you were downloading only a small range it would
account bandwidth based on the full segment.
This doesn't fully address the accounting since the lazy segment
downloads do not send their requested range nor requested limit.
Change-Id: Ic811e570c889be87bac4293547d6537a255078da
There was a bug when user tried to get project after removing themselves from it.
Also we made user select firstly created project only if they removed themselves from current selected project.
Change-Id: I4b28ebc1ab4a8c14d05ef702e034f2ab39225cc3
Method IterateLoopSegments can be used to iterate over all segments in metabase without touching objects.
Change-Id: I3cc0e783884b603b47ef3f8233e357aa8a391250
Because of recent changes to how coupons for the free tier are handled
(see commit 4c0817bcfb), we no longer want all these $10
non-expiring coupons. After coupons are applied during invoice
generation, if a customer does not have any valid (non expired, non
consumed) coupons, a new promotional coupon is applied.
We could just wait for users to consume all $10 of the non-expiring
coupons, and the new promotional coupon would be applied for the
following billing cycle, but this gets tricky, because if in the final
month, the user is billed for $1 of usage, but only $0.5 of the $10
non-expiring coupon is remaining, the user will be charged for the
remaining $0.5. With the new promotional coupon of $1.65, expiring every
month, this would not be an issue.
So long story short, this commit migrates all non-expiring coupons to
expire within 2 billing periods (all existing non-expiring coupons in
prod were created in early April or later). That way, there is still
enough value in the $10 coupon that we don't have to worry about
customers exceeding it, and the coupons will expire. Then we'll
immediately apply the $1.65 coupon for the next month! And then
hopefully this unfortunate situation will come to a pleasant end.
Change-Id: I8a593948d8876c41a71d886b9a95d4e2c802b4f3
Replace GetProjectAllocatedBandwidth by GetProjectBandwidth which calculates
used bandwidth from allocated and settled bandwidth recorded in the
project_bandwidth_daily_rollups table.
For each day in the month, if the allocated bandwidth is expired, it uses the
settled bandwidth for computing used bandwidth.
Change-Id: Ife723c6d5275338f470619631acb25930d39ac3c
project_bandwidth_daily_rollups table
We want to calculate used bandwidth better so we need to calculate it
from allocated and settled bandwidth. To do this we need first populate
this new table.
https://storjlabs.atlassian.net/browse/PG-56
Change-Id: I308b737bf08ee48ce4e46a3605697ab2095f7257
Rather than applying our internal satellite implementation of coupons
when new accounts are created, use a configured Stripe coupon instead.
If no configuration is set, no coupon will be applied.
This change also removes logic for adding coupons to customers who pay
with crypto - they will already have the free tier coupon applied
anyway.
We will be phasing out our internal coupon implementation.
Change-Id: Ieb87ddb3412acbc74986aa9d18a4cbd93c29861a
The context passed into SendEmail gets canceled before links are clicked
in the test environment. This change passes an un-cancelable context
from SendRenderedAsync so that email sending/link clicking can be
completed even if the parent context is canceled.
Change-Id: I88535d315900d7886877f0e14d1d052745402ac7
Improve UpdateCheckIn on a contended row:
name old time/op new time/op delta
UpdateCheckInContended-100x-32 2.29s ±55% 0.17s ±61% -92.45% (p=0.008 n=5+5)
Change-Id: I053ab9f1cff136c306e5fb57f5e355cdc0269a8c
Piece hash verification failures during repair download are considered
audit failures, but we are not logging these occurrences. Now we log
them.
Change-Id: If456cebcfda6af7a659be3d1fc74448e681fb653
Add test with NotBefore and NotAfter restricted permission to verify that we don't have an access to bucket
Change-Id: I7ec98a5b02c0098ee7ec81034278398f4435f1cf
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Initially metabase was developed separately and it was useful to have a
separate environment flag for tests, however, it's more convenient to
use the same as rest of the testsuite.
Change-Id: Ia4d79be27ce5911cbae68d57cdf0b30f63459444
Currently we were duplicating code for AS OF SYSTEM TIME in several
places. This replaces the code with using a method on
dbutil.Implementation.
As a consequence it's more useful to use a shorter name for
implementation - 'impl' should be sufficiently clear in the context.
Similarly, using AsOfSystemInterval and AsOfSystemTime to distinguish
between the two modes is useful and slightly shorter without causing
confusion.
Change-Id: Idefe55528efa758b6176591017b6572a8d443e3d
So far we were setting ZombieDeletionDeadline alwasy as nil and because of that DB default was never set. This change adds separate query for inserting object if deadline is not set.
Change-Id: I3d6a16570e7c74b5304e13edad8c7adcd021340c
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
The system and database time may drift. We should use database time for
absolute "as of system time" to ensure that it's not newer than the
current database time. When the "as of system time" is in the future,
then the query will fail.
Change-Id: I5423f6aaad966ca03a76b5ff805bfba932e44a51
multiregion satellites have complex database connection strings
largely due to using a different backend for the repair queue than
cockroach.
billing stuff didn't work right with this.
Change-Id: Ie8759a8c47e71347c3a190abfc9d53945d7b8855
Add an auto-generated table of content to the README for easy to find
and browser the documentation of the available API end points.
Change-Id: Id94d904cefd30449234224072ddc50a181aaba04
Currently nodeselection package only contained state for uploads, move
these to a subpackage, such that we can make another "downloadselection"
for downloads. Then move selection logic from overlay to nodeselection.
Change-Id: I0fc42bcae3a29db2728dae9f3863b1e95bf5165b
When audits are being recorded, we automatically add some SQL to remove
the node from the pending audits table in case it exists. They are
removed from pending audits even if the node was offline for the audit.
This is not the correct behavior.
Add statement to record audit results in reverify tests to ensure no
more false positives.
Change-Id: I186ae68bc5e7962ef6c5defbebc1d95e63596a17
We are already adding the free tier coupons at the end of
InvoiceApplyCoupons, but there is a case where we will charge customers
who do not currently have a coupon the next time invoices are generated.
By applying the free tier coupon before preparing invoice project
records, we cover this case.
Once every customer has a coupon, it will be safe to remove this
functionality and only apply new coupons at the end of invoicing.
Change-Id: I65afbe5c0b84e63eeb1a0221e8d95311d87641a0
The DBs of our production satellites have some indexes that we didn't
have in the migrations because at that time we weren't able to add them
because our migration test was not able to deal with Cockroach indexes
with the STORING clause.
We have recently modified the storj.io/private/dbutil/pgutil package to
support the CRDB STRORING clause, so we are adding the missing indexes
to our migrations for being able to have them if we have to recover a DB
from scratch or we deploy a new DB satellite.
Change-Id: I686ff84e5b4c02d9615f50fa531261363affefb8
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
The previously configured never-expiring coupon does not refill every
month. Eventually, even though it never expires, it will run out. This
commit makes several small changes to address this issue for the free
tier:
* Change the config for the promotional coupon to be $1.65 for 1 month
(the change from $10 to $1.65 is due to our recent pricing changes)
* Update PopulatePromotionalCoupons (PPC for brevity) to add promotional
coupons to users with expired and consumed coupons (all users with a
project and no active coupons should get a new coupon when PPC is called)
* Call PPC at the end of the `create-invoice-coupons` stage of invoice
generation - after current coupons are processed and expired/exhausted.
* Remove legacy admin functionality for PPC from satellite/console - we
do not currently use it, but if we did, it should be in satellite/admin
instead.
Change-Id: I77727b97bef972df32ebb23cdc05055827076e2a
