should be
https://link.tardigradeshare.io/s/<access>/<bucket>/<path>
legacy URLs have the /s/ missing but a redirect is issued
Change-Id: Ic2a3dc092ff68d7706fd888a9fbfc27716877c6e
This PR removes all back-end related referral program code including the
marketing portal.
We will have a separate PR for front-end code and database migration to
drop `offers` and `usercredits` table
Change-Id: If59f952cddfe0558a7dc03a0eac7cc1081517f88
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
Add a command to the satellite for cleaning up the Graceful Exit (a.k.a
GE) transfer queue items of nodes that have exited.
The commit adds to the GE satellite DB a couple of new methods, and its
corresponding test, for performing the operations of the new command.
Change-Id: I29a572a59689d63b24990ac13c52e76d65aaa917
Provide a clearer error message to users who confuse the API Key with
the Access Grant and suggest the right command to them.
Change-Id: If73ae8cde140b68a19f4cfc3f59bb88a3b74c9c1
Currently first satellite GC would've conflicted with second satellites
public RPC port. Instead assign "satellite workers" a new peer class.
Change-Id: Id6bdaa17243556482e88da708c5147149788f6be
In the past we were storing fixed segment size with StreamInfo, encrypted in metadata. The value was unencrypted size of segment, not encrypted one.
Change-Id: Id6b18440c674223eabbb152b1636c83e1ab6462c
We add a timeout for the http client used to register the access with
the auth service. We have a hard-coded common default for now.
Change-Id: I50207ad83c9221b7cb61f39310e24b140b95673b
Allow the satellite commands which uses the live accounting cache (core
and API) to run when at the time that its instantiated there is an error
connecting to the backend.
This prevent that if live accounting backend is down we can run these
services because:
1. The services must run despite of the cache backend being down
although it may be degraded.
2. We may need to start new replicas of the services or the services in
a different place while we are troubleshooting and fixing the cache
backend system.
3. Our services may restart when the cache backend or the network
connecting to it fails momentarily.
Change-Id: Ic93f9571bc0865c9488d64ab1356376fae797efc
Jens noticed that 'uplink access register' wasn't working with named
accesses.
This was because GetNamedAccess was harcoded to use inspectCfg, which
in the case of 'uplink access register' wasn't being bound to the
config file.
Change-Id: I49403b45af28ad33408cfc5ec6545a395f0f080d
Fail all the processes immediately when one of the processes fails. This
is to make it more obvious that one of them has failed.
To disable failfast, use `-failfast=false`.
Change-Id: I2bbedf12fb653e42739d00273aa9ae515d34eda6
Previously, we were trying to overwrite accesses, which is a nested map
in the uplink config, by calling viper.MergeWithConfig with a nested
map. While this works for keys that don't exist already, it does not
overwrite already existing keys. In order to do that, we need to call
MergeWithConfig with "accesses.<accessname> -> value" rather than using
"accesses -> <accessname> -> value".
Change-Id: I74d7a9decf2078cdf2ff440eaf24821e30474b53
The current uplink access register method has the ability to write to AWS credential files.
This is caused issues with repeat usage in recent AWS CLI code, and there was concern that
it was an unstable solution. This version instead specifies various output formats "env"
and "aws". "env" formats the text so that it can be used with 'export'. "Aws" generates
"aws configure" commands to persist the credentials to the AWS credential files as the
previous version could.
Example usages:
Setting ephemeral evironment variables in bash:
export $(uplink access register $(storj-sim network env GATEWAY_0_ACCESS)
--auth-service http://localhost:8000 --format env)
Setting persistant configs via AWS CLI in bash:
source <(uplink access register $(storj-sim network env GATEWAY_0_ACCESS)
--auth-service http://localhost:8000 --format aws --aws-profile storjsim)
Change-Id: I5d78d6462a3537780af3717a298bb2bebf9c2799
Gateway-MT requires integration tests, which would be aided by having an
exported RegisterAccess() method in uplink/cmd.
To support this change, a little of the Uplink cmd logic was shifted around
and a method was made public. I also normalized finding the access
between accessInspect and accessRegister.
Change-Id: I29369296521c2cc179e27233f5451b95f46109d8
Since the Satellite now requires the order encryption functionality (since serial_number table is deprecated) to properly function, we can remove the config flag to turn on/off the feature.
Change-Id: Ie973f72a9a05a81cef9e53dc9c99d22c940c2488
WHAT:
added brotli compression for wasm files and added copying of those files to static/wasm folder in Dockerfile
WHY:
those files are a part of web worker webpack bundle and I didn't find a way to compress them separately using webpack.
I'm open to any other ideas if they come up
Change-Id: I105cc1582e9816fd9b63052ba48358525c85a164
Currently node id in access grant is '1' and it cannot be parsed to
valid node id. This change update access grant satellite address with
randomly generated node id.
Change-Id: Id1684ac71509bc5a8177b069a914355be3c72d43
and replaces access grant with access
uplink share <path> --> creates access grant
uplink share --register <path> --> registers access grant
uplink share --url <path> --> creates URL, implies register and public
uplink share --dns <hostname> <path> --> creates dns info, implies register and public
Change-Id: I7930c4973a602d3d721ec6f77170f90957dad8c0
It was designed to detect and remove zombie segments in the PointerDB.
This tool should be not relevant with the MetabaseDB anymore.
Change-Id: I112552203b1329a5a659f69a0043eb1f8dadb551
It turns out, that running a docker image build for specific
arches is not possible from amd64 (eg. installing ca-certificates).
Change-Id: I8b8f002b7e532fb4a0c6542d5b573c294c501068
Jeff provided feedback on https://review.dev.storj.io/c/storj/storj/+/3176 after
the changeset was already merged. I attempt to address that feedback here.
Change-Id: Ibc7dba3e4e2c73736042fe4b4ee49ce679ba7f44
We want to stop using the serial_numbers table in satelliteDB. One of the last places using the serial_numbers table is when storagenodes settle orders, we look up the bucket name and project ID from the serial number from the serial_numbers table.
Now that we have support to add encrypted metadata into the OrderLimit, this PR makes use of that and now attempts to read the project ID and bucket name from the encrypted orderLimit metadata instead of from the serial_numbers table. For backwards compatibility and to ensure no errors, we will still fallback to the old way of getting that info from the serial_numbers table, but this will be removed in the next release as long as there are no errors.
All processes that create orderLimits must have an orders.encryption-keys set. The services that create orderLimits (and thus need to encrypt the order metadata) are the satellite apiProcess, the repair process, audit service (core process), and graceful exit (core process). Only the satellite api process decrypts the order metadata when storagenodes settle orders. This means that the same encryption key needs to be provided in the config for the satellite api process, repair process, and the core process like so:
orders.include-encrypted-metadata=true
orders.encryption-keys="<"encryptionKeyID>=<encryptionKey>"
Change-Id: Ie2c037971713d6fbf69d697bfad7f8b672eedd66
Added flag to append a new profile to ~/.aws/credentials using
the provided profile name. This is handy for the AWS CLI, so
you can do things like 'aws configure get aws_access_key_id --profile=me'
Change-Id: I0469a18ca76e078624ed455a06bd7aabd95a1b97
this change tries really hard to never have all of the storage node
rollups in memory at the same time, up until the rollups are actually
getting summed together.
Change-Id: If67f49e7d71106798d996a6850b3e48671bd9e18
Previously uplink register only accepted a fully serialized access grant.
This is kind of annoying, I changed it so that it could also use access names.
Change-Id: If6d4d1baa8d4fb3d87fdedb895d459fa12743f1a
Firstly, this changes the repair functionality to return Canceled errors
when a repair is canceled during the Get phase. Previously, because we
do not track individual errors per piece, this would just show up as a
failure to download enough pieces to repair the segment, which would
cause the segment to be added to the IrreparableDB, which is entirely
unhelpful.
Then, ignore Canceled errors in the return value of the repair worker.
Apparently, when the worker returns an error, that makes Cobra exit the
program with a nonzero exit code, which causes some piece of our
deployment automation to freak out and page people. And when we ask the
repair worker to shut down, "canceled" errors are what we _expect_, not
an error case.
Change-Id: Ia3eb1c60a8d6ec5d09e7cef55dea523be28e8435
For coordinating with other processes it can be useful to wait until
another process is accepting requests on an address.
Change-Id: Id623ed815149f14f9f0344e2f396ab70fc4dec6a
Previously, we created a new file to use for directory verification
every time the storage node starts. This is not helpful if the storage node
points to the wrong directory when restarting. Now we will only create the file
on setup. Now the file should be created only once and will be verified at
runtime.
Change-Id: Id529f681469138d368e5ea3c63159befe62b1a5b
Previously, we ran setup if no config file was found in the expected dir.
However, there may be situations where a previously set up node's files
may be unreachable. In this case, we would prefer to exit with an error
rather than assume this node needs to be initialized.
The solution here is to add a new env variable to call the setup command.
If SETUP == true, the node will setup, but not run. If SETUP != true,
the node will run and not setup.
If a previously set up node runs with SETUP, it will return an error.
If a node runs without an initial SETUP, it will return an error.
Change-Id: Id2c796ec3d43f2add5e5f34fb777a563eae59f2f
This change forward-proofs the satellite selection on uplink setup.
Currently we have hard-coded response values, so if we add satellites in
the future we have to remember to update the switch statement below. In
this change it should work for any number of future satellites.
Change-Id: I3250fe2154dbeb4820efadf49780b20c4b7a3408
This PR fixes below issues:
1. remove concurrent installation for various versions
We were doing this to decrease the amount of execution time the versions test.
However, it's returning incorrect exit code when there's an
installation failure.
Right now, we are only installing two versions of `storj-sim` and
the rest are only doing uplink cli installation. The performance of
this test should be hugely impacted by the setup step now.
2. only remove release settings instead of deleting the entire file
uplink CLI is referrencing `private/version` package. Therefore, we
cannot delete it
3. add back `GATEWAY_0_API_KEY` in storj-sim
In order to set up older version of uplink cli, we need access to
the gate way api key.
Change-Id: Ia3c37c197bd007b6e1f7c2bd71adde42181d46f0
As part of the Metainfo Refactoring, we need to make the Metainfo Loop
working with both the current PointerDB and the new Metabase. Thus, the
Metainfo Loop should pass to the Observer interface more specific Object
and Segment types instead of pb.Pointer.
After this change, there are still a couple of use cases that require
access to the pb.Pointer (hence we have it as a field in the
metainfo.Segment type):
1. Expired Deletion Service
2. Repair Service
It would require additional refactoring in these two services before we
are able to clean this.
Change-Id: Ib3eb6b7507ed89d5ba745ffbb6b37524ef10ed9f
Check binary version on self-update instead of current process
version to prevent updating already updated binary.
Add info logs to report current version of service beeing
updated.
Change-Id: Id22dee188a99d6d45db925104786f49f5d3a61ae
This makes it possible to remove of this obsolete flag from the
multi-tenant gateway.
As a consequence, displaying the GATEWAY_0_ACCESS env var will always
require a running storj-sim. Until now, it was required only the first
time. Then the value was stored in the 'access' config. But this is now
not possible anymore.
The changes in StripeMock are required to fix failures in integration
tests. StripeMock is in-memory and its data does not survive restarts of
storj-sim. The second and following starts of storj-sim had invalid
state of StripeMock, which failed requests that were required to
populate the GATEWAY_0_ACCESS env var. The changes in StripeMock makes
it repopulate the Stripe customers from the database.
Change-Id: I981a208172b76577f12ecdaae485f5ae4ea269bc
log.Fatal immediately terminates the program without running any defers.
We should properly close all the services and databases.
Change-Id: I5e959cef3eafedeacb3a2062e3da47e8d04e8e75
Sadly the build process with this command is very, very flaky and often fails pulling down curl via apk.
As we currently do not need it anyway, it is safe to remove.
Change-Id: I8a396c560d61a7fe6324560152a68c07c6b31638
The VerifyPieceHashes method has a sanity check for the number pieces to
be removed from the pointer after the audit for verifying the piece
hashes.
This sanity check failed when we executed the command on the production
satellites because the Verify command removes Fails and PendingAudits
nodes from the audit report if piece_hashes_verified = false.
A new temporary UsedToVerifyPieceHashes flag is added to
audits.Verifier. It is set to true only by the verify-piece-hashes
command. If the flag is true then the Verify method will always include
Fails and PendingAudits nodes in the report.
Test case is added to cover this use case.
Change-Id: I2c7cb6b12029d52b2fc565365eee0826c3de6ee8
Remove usage of --non-interactive flag. It is not provided (and
necessary) by the multitenant S3 gateway anymore.
ACCESS_KEY and SECRET_KEY env vars are not provided anymore as they are
not generated by the multitenant S3 gateway.
Change-Id: I3ecfb92110e31ae13977de3899dad273daae6c1e
Jira: https://storjlabs.atlassian.net/browse/PG-69
There are a number of segments with piece_hashes_verified = false in
their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. Most probably, this happened due to a bug we had in the
past. We want to verify them before executing the main migration to
metabase. This would simplify the main migration to metabase with one
less issue to think about.
Change-Id: I8831af1a254c560d45bb87d7104e49abd8242236
Jira: https://storjlabs.atlassian.net/browse/PG-67
There are a number of old-style objects (without the number of segments
in their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. We want to migrate their metadata to contain the number of
segments before executing the main migration to metabase. This would
simplify the main migration to metabase with one less issue to think
about.
Change-Id: I42497ae0375b5eb972aab08c700048b9a93bb18f
Fix case where line is larger than maxline and writer ended up in an
infinite loop trying to buffer more data.
Change-Id: I243da738b331279d6bf27255778b5798e7f37f95
This PR updates `uplink rb --force` command to use the new libuplink API
`DeleteBucketWithObjects`.
It also updates `DeleteBucket` endpoint to return a specific error
message when a given bucket has concurrent writes while being deleted.
Change-Id: Ic9593d55b0c27b26cd8966dd1bc8cd1e02a6666e
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.
Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
Jira: https://storjlabs.atlassian.net/browse/USR-822
This the last step of dropping these 2 db tables. It also deletes all
code associate with them.
Change-Id: I8be840dc2a7be255cf6308c9434b729fe4d9391e
Add a config so that some percent of users require credit cards /
account balances
in order to create a project or have a promotional coupon applied
UI was updated to match needed paywall status
At this point we decided not to use a field to store if a user is in an
A/B
test, and instead just use math to see if they're in a test. We decided
to use MD5 (because its in Postgres too) and User UUID for that math.
Change-Id: I0fcd80707dc29afc668632d078e1b5a7a24f3bb3
To prevent storagenode from implicitly recreating missing dbs and storage,
as such behaviour leads to audit failures. Do not allow storagenode to
start if any of dbs or storage is missing, corrupted, or dedicated storage disk is
unmounted, to get downtime instead.
Change-Id: Ic64e1f0ff4d8ef5b2fddbe7a7e53df4f4bd8652e
We passed in revocationDB and metainfoDB for no reason.
Lets remove it from the dependency list to further reduce the footprint.
Change-Id: Ic0317bb92670fbd305d4a8b0ed1cb82858e2f6d3
Jira: https://storjlabs.atlassian.net/browse/USR-821
The `migrate-credits` billing command checks the available credits
balance for all users and moves it to the Stripe balance by creating a
new credit balance transaction.
Change-Id: Iafc7b95a4edad47f7c145a22e210f8c821ac183d
Add a long description to the graceful exit command to clearly mention
that the command is interactive asking which satellite the SNO wants to
exit.
Change-Id: Icd4056a470e707322f600133e63d9dc56eb877b7
When a request comes in on the satellite api and we validate the
macaroon, we now also check if any of the macaroon's tails have been
revoked.
Change-Id: I80ce4312602baf431cfa1b1285f79bed88bb4497
when a user runs `uplink share`, they get a bunch of results back,
given their configuration and existing access. one of the results
is a URL for in-browser sharing and hosting of the file.
first off, we want to make sure this URL is read only. we want to
avoid a situation where someone post this URL to some public
location, not realizing the access allows writes or deletes. if
a user really wants a URL with write/delete access, they can
construct it themselves.
secondly, we want to make sure the url is sharing a single path or
path prefix. having a url for multiple paths/path prefixes
indepedently again can be constructed of course, but should not
be the default behavior
Change-Id: I2ca2ebeea9f1c7d4bfbd7a437a32dc7a3b2a32cc
Reverts https://review.dev.storj.io/c/storj/storj/+/2074
That change broke all billing commands with `sql: database is closed`.
Fixing the issue does not make sense as the whole setup of billing
commands is now error-prone. It's better to revert it.
Change-Id: Id13f817b73c7313ba60181f740b0712e4bdce077
