This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Currently we did not limit the "as of system time" for iterating over
objects table. Using just an interval would cause problems with the
tests. That could be overcome skipping that interval for tests
altogether, however, we should probably test those more to ensure that
GC stays working as intended.
This is a safer code, however, maybe not as straigthforward as it could
be.
Change-Id: I374f77783b2af42bb6da846735ceea20a7ce5e60
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Rather than applying our internal satellite implementation of coupons
when new accounts are created, use a configured Stripe coupon instead.
If no configuration is set, no coupon will be applied.
This change also removes logic for adding coupons to customers who pay
with crypto - they will already have the free tier coupon applied
anyway.
We will be phasing out our internal coupon implementation.
Change-Id: Ieb87ddb3412acbc74986aa9d18a4cbd93c29861a
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
The previously configured never-expiring coupon does not refill every
month. Eventually, even though it never expires, it will run out. This
commit makes several small changes to address this issue for the free
tier:
* Change the config for the promotional coupon to be $1.65 for 1 month
(the change from $10 to $1.65 is due to our recent pricing changes)
* Update PopulatePromotionalCoupons (PPC for brevity) to add promotional
coupons to users with expired and consumed coupons (all users with a
project and no active coupons should get a new coupon when PPC is called)
* Call PPC at the end of the `create-invoice-coupons` stage of invoice
generation - after current coupons are processed and expired/exhausted.
* Remove legacy admin functionality for PPC from satellite/console - we
do not currently use it, but if we did, it should be in satellite/admin
instead.
Change-Id: I77727b97bef972df32ebb23cdc05055827076e2a
Allows us to remove the following files from satellite branding
repo, with an up-to-date single source of truth now in storj/storj:
* web/satellite/src/common/registrationSuccess.html
* web/satellite/src/common/registrationSuccess.scss
* web/satellite/src/views/register/registerArea.html
* web/satellite/src/views/register/registerArea.scss
The registrationSuccess files have been removed from all satellites in
the branding repository. The registerArea files have been removed only
from production satellites in the branding repository.
Importantly, this change enables the "resend email" functionality on
production satellites - previously, this functionality was available in
storj/storj, but not our branding repository.
Removes the config for VerificationPageURL, which redirected users away
from the satellite app to storj.io after creating an account. In order
for the email resend button to work, we cannot leave the app.
Adds a new config value for partner satellites, which replaces the
partner satellite names config. The new config includes name and
address. It is validated on setup/run to ensure it can be parsed.
Change-Id: I67db0702d9b9641f1a37b599f2929d56f3c33aca
Co-authored-by: littleskunk <jens.heimbuerge@googlemail.com>
Co-authored-by: JT Olio <hello@jtolio.com>
Co-authored-by: Igor <38665104+ihaid@users.noreply.github.com>
We can be more precise and conservative by using the backend
satellite/analytics service. We also no longer need client-side Segment
scripts.
Change-Id: Ic5fb18bea2d388b586ad773e26027d69bde87294
The new default promotional coupon is $10/month, and doesn't expire.
This change also migrates the coupon.duration column over to the new
coupon.billing_periods, and switches to rely completely on
billing_periods.
Change-Id: Ic3341e9fa4040449bab5e66ca4ee2640b095cf3d
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
- add Credit History table to billing acount page and set up ui for a user adding promo codes
- implement promo codes ui in registration form
- add feature flag to handle if coupon code ui should be rendered
Change-Id: I9fdeef7cffc7901958d3f9be335e1115b2471a2e
* Set up basic structure of new service.
* Implement a basic analytics track event for user creation.
Change-Id: Ica8c785540b1ef9d848404af307a22f21d33c6aa
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
We are implementing the free tier, which will give all new users 3
projects, 50gb storage, and 50gb bandwidth per project. All users will
receive a recurring coupon to cover this amount of usage.
With the free tier, we no longer need a paywall. Users will not need to
enter a payment method unless they want to increase their project or
usage limits.
Change-Id: If3b026e91858e5f557a2758e366616cecc8f21c7
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
WHAT:
enter passphrase step for users who has already created passphrase
WHY:
to let users proceed to upload step
Change-Id: I084aec5b863981978cf190f99ee95154fbed9aab
WHAT:
beta satellite top banner's copy is changed to include support/feedback URLs
WHY:
so users using our beta satellite will be able to report feedback somewhere
Change-Id: Ibc349c8b3354b577275fcf1d2b75bfdd267729d9
The previous default FlushBatchSize of 10000 was causing major
slow down in select and insert statements on bucket_bandwidth_rollups.
We saw on the saltlake satellite that a FlushBatchSize of 1000 helped
reduce contention and query latency.
Change-Id: Ib95e73482219bc5aedc11925b1849fa5999774ba
WHAT:
config flag to indicate if satellite is in beta
WHY:
to avoid using hardcoded satellite names which may cause issues
Change-Id: If92eb7417c340bf343a9a91e2f6b11f0349020c5
This PR removes all back-end related referral program code including the
marketing portal.
We will have a separate PR for front-end code and database migration to
drop `offers` and `usercredits` table
Change-Id: If59f952cddfe0558a7dc03a0eac7cc1081517f88
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
The rollup archiver chore moves bucket bandwidth rollups and
storagenode rollups that are older than a given duration
to two new archive tables.
Change-Id: I1626a3742ad4271bc744fbcefa6355a29d49c6a5
