* set to only listen on 127.0.0.1, move static files to same location, better template handling
* handle error
* fix path in storj-sim
* revert template handling changes
* code shouldn't panic on invalid tempalte
* do not rewrite once writing has started
* write correct error code
* use filepath for path handling
* revert change
* fix
* fix mod tidy
* use correct error code for not found, avoid infinite loop on failure
* Set up new port 8090 for in offers
Clean up commented code
Rename offers to offersweb
Remove unused code
Add todos for adding front-end templates
Add middleware for only allow local access
Add comment
Fix linting error
Remove commented code
Update storj-sim
Check request IP against Host IP
Use net pakcage to retrieve IP address
Rename service to marketing
* Add wrapper for all errors
* fix conflicts
* update the config file
* fix linting error
* remove unused packages
* remove global runtime var and add flag to storj-sim for mar static dir
* remove debugging lines
* add new config for test data and check if static dir flag is set before passing to mux
* change 'console' to 'marketing' for test data config
* fix linting errors
* update config flag
* Trigger Jenkins
* Trigger CLA
* uplink: Mark encryption key config field for setup
Set the "setup" property to the `EncryptionConfig.EncrptionKey` for
avoiding to save it in the configuration file.
This field is only meant for using in the command line parameters which
need to use a different encryption key than the one present in the key
file or use it when there is not set any encryption key file path.
* cmd/uplink: Setup non-interactive accept enc key
Change the uplink CLI setup command non-interactive to save the
encryption key into a file when it's passed through the flag
--enc.encryption-key
Previous to this change it wasn't possible to create an key file despite
of that the flag was provided, so it was useless on the setup command.
* cmd/uplink: Reuse logic to read pwd from terminal
Reuse the logic which is already implemented in the pkg/cfgstruct for
reading a password from the terminal on interactive mode, rather than
duplicating it in the setup command.
* cmd/gateway: Use encryption key file flags
The cmd/gateway was still using the `enc.key` configuration field which
doesn't exist anymore and its setup command wasn't using the
`enc.key-filepath` with combination of the `enc.encryption-key` for
generating a file with the encryption key.
This commit update the cmd/gateway appropriately and move to the uplink
package the function used by cmd/uplink to save the encryption key for
allowing to also be used by the cmd/gateway without duplicating the
logic.
* cmd/storj-sim: Adapt gateway config cmd changes
Adapt the cmd/storj-sim to correctly pass the parameters to the
cmd/gateway setup and run command.
* scripts: Don't pass the --enc.encryption-key flag
uplink configuration has changed to only support the
`--enc.encryption-key` flag for setup commands and consequently the
cmd/uplink and cmd/gateway don't accept this flag over other commands,
hence the test for the uplink had to be updated for no passing the
flag on the multiples calls that the test do to cmd/uplink.
* uplink: Remove func which aren't useful anymore
Remove the function which allows to user or load an encryption key
because it isn't needed anymore since the `--enc.encryption-key` flag is
only available for the setup command.
Consequently remove its usage from cmd/uplink and cmd/gateway, because
such flag will always be empty because in case that's passed Cobra will
return an error due to a "unknown flag".
* change BindSetup to be an option to Bind
* add process.Bind to allow composite structures
* hack fix for noprefix flags
* used tagged version of structs
Before this PR, some flags were created by calling `cfgstruct.Bind` and having their fields create a flag. Once the flags were parsed, `viper` was used to acquire all the values from them and config files, and the fields in the struct were set through the flag interface.
This doesn't work for slices of things on config structs very well, since it can only set strings, and for a string slice, it turns out that the implementation in `pflag` appends an entry rather than setting it.
This changes three things:
1. Only have a `Bind` call instead of `Bind` and `BindSetup`, and make `BindSetup` an option instead.
2. Add a `process.Bind` call that takes in a `*cobra.Cmd`, binds the struct to the command's flags, and keeps track of that struct in a global map keyed by the command.
3. Use `viper` to get the values and load them into the bound configuration structs instead of using the flags to propagate the changes.
In this way, we can support whatever rich configuration we want in the config yaml files, while still getting command like flags when important.
* added scopelint and correcte issues found
* corrected scopelint issue
* made updates based on Ivan's suggestions
Most were around naming conventions
Some were false positives, but I kept them since the test.Run could eventually be changed to run in parallel, which could cause a bug
Others were false positives. Added // nolint: scopelint
* first round cleanup based on go-critic
* more issues resolved for ifelsechain and unlambda checks
* updated from master and gocritic found a new ifElseChain issue
* disable appendAssign. i reports false positives
* re-enabled go-critic appendAssign and disabled lint check at code line level
* fixed go-critic lint error
* fixed // nolint add gocritic specifically
* add aws s3 benchmark script
* add s3 benchmark tests
* rearrange so smaller diff, fix spelling
* add configurable uplink config for s3-benchmark
* make new bucket w/unique name for each s3 test
* changes per CR
* update uplink cmd args
* add uplod/download benchmark, add script to run benchmarks
* fix lint err
* changes per CR comments
* export env var for linux
* fix lint
* add byte count to bench test
Uplink CLI was returning an error when the `--config-dir` flag was
used with interactive `setup` command because the directory used for
storing the encryption key file was the default configuration directory
rather than the value set in the flag.
This changes make the setup process to use the same directory, than the
one informed by the `--config-dir` flag value, for storing encryption
key file.
On the other hand, the default value for the encryption key file path
which was set with the purpose of showing it in the help message has
been removed because the cfgstruct doesn't show it unless that the flag
is set to the Cobra root CMD, so it was useless.
Also show the absolute path where the encryption key file has been saved when
the interactive setup command ends satisfactorily as it's equally done
with the configuration file.
What: allow packetfilter to work on packet destinations instead of only on metric destinations. this will allow us to filter what applications get sent to rothko.
Why: currently rothko is drowning in storj-sim data and it'd be nice to filter out.
* uplink: Add a new flag to set the filepath of the file which is used for
saving the encryption key and rename the one that hold the encryption key and
establish that it has priority over the key stored in the file to make the
configuration usable without having a huge refactoring in test-sim.
* cmd/uplink: Adapt the setup subcommand for storing the user input key to a file
and adapt the rest of the subcommands for reading the key from the key-file when
the key isn't explicitly set with a command line flag.
* cmd/gateway: Adapt it to read the encryption key from the key-file or use the
one passed by a command line flag.
* pkg/process: Export the default configuration filename so other packages which
use the same value can reference to it rather than having it hardcoded.
* Adapt several integrations (scripts, etc.) to consider the changes applied in uplink and cmd packages.
* cmd/uplink: add share command to restrict an api key
This commit is an early bit of work to just implement restricting
macaroon api keys from the command line. It does not convert
api keys to be macaroons in general.
It also does not apply the path restriction caveats appropriately
yet because it does not encrypt them.
* cmd/uplink: fix path encryption for shares
It should now properly encrypt the path prefixes when adding
caveats to a macaroon.
* fix up linting problems
* print summary of caveat and require iso8601
* make clone part more clear
* add flags to sotrj-sim for SA dbs
* add schema to postgres
* add createschema with parse to sa
* add metainfo db postgres support
* add kv default as bolt
* add debug log to see db source
* add env var for postgres to test-sim.sh
* fix lint errs
* dynamically add postgres to args
* add postgres to integration tests
* add sqlite and postgres integration jenkins
* fix db name
* merge integration tests into one step
* test integration tests w/psql
* try using different schema
* debug failure
* use correct host for running storj-sim
* rm sqlite integration
* add back integration
* tie defaults to releases
this change makes it so that by default, the flag defaults are
chosen based on whether the build was built as a release build or
an ordinary build. release builds by default get release defaults,
whereas ordinary builds by default get dev defaults.
any binary can have its defaults changed by specifying
--defaults=dev
or
--defaults=release
Change-Id: I6d216aa345d211c69ad913159d492fac77b12c64
* make release defaults more clear
this change extends cfgstruct structs to support either
a 'default' tag, or a pair of 'devDefault' and 'releaseDefault'
tags, but not both, for added clarity
Change-Id: Ia098be1fa84b932fdfe90a4a4d027ffb95e249c6
* clarify cfgstruct.DefaultsFlag
Change-Id: I55f2ff9080ebbc0ce83abf956e085242a92f883e
* hardcode debug ports for storj-sim
* add function to create port
* add 200 limit to sn
* remove iota and mv instance count
* remove singleIndex var
* remove err checking from port fx
* mv unneeded conversion
What: This change moves project-level bucket metadata encryption information to the volatile section, because it is unlikely to remain in future releases
Why: Ultimately, the web user interface will allow bucket management (creation, removal, etc), but not object management as that requires an encryption key for sure and we don't want to have users give the satellite their encryption keys.
At a high level, a (*Project) type should map to all of the things you can do inside the web user interface within a project, which by necessity cannot have an encryption key. So, we really don't want an encryption key in the non-volatile section of this library.
* releases: update alpha dockerfiles to embed release tags
Change-Id: I2978d3ed77d1b768be24ec9194bc404cd92e4700
* release script use plain shell
Change-Id: Ie4ca6633014e3bf00ac0c82e28905174a6ade95b
* removed /scripts from .dockerignore
Change-Id: Ib555236d62fb3dc354689284ac4a032d5b4b3aa8
* switch back to bash
Change-Id: Ie0958cde71cd396f44ac28c177f48df0bea7ba22
* fix go1.12 modules
Change-Id: If4c8364e7271f09febd1a6c8bfc731d723d344d9
* make sure the work tree is clean
Change-Id: Ie6e52af28e2bc52880d92a3b574d1f859fc8e88e
* internal/version: do version checks much earlier in the process initialization, take 2
Change-Id: Ida8c7e3757e0deea0ec7aea867d3d27ce97dc134
* linter and test failures
Change-Id: I45b02a16ec1c0f0981227dc842e68dbdf67fdbf4
Make separate "CreateCertificate" and "CreateSelfSignedCertificate"
functions to take the two roles of NewCert. These names should help
clarify that they actually make certificates and not just allocate new
"Cert" or "Certificate" objects.
Secondly, in the case of non-self-signed certs, require a public and a
private key to be passed in instead of two private keys, because it's
pretty hard to tell when reading code which one is meant to be the
signer and which one is the signee. With a public and private key, you
know.
(These are some changes I made in the course of the openssl port,
because the NewCert function kept being confusing to me. It's possible
I'm just being ridiculous, and this doesn't help improve readability for
anyone else, but if I'm not being ridiculous let's get this in)
* Initial Webserver Draft for Version Controlling
* Rename type to avoid confusion
* Move Function Calls into Version Package
* Fix Linting and Language Typos
* Fix Linting and Spelling Mistakes
* Include Copyright
* Include Copyright
* Adjust Version-Control Server to return list of Versions
* Linting
* Improve Request Handling and Readability
* Add Configuration File Option
Add Systemd Service file
* Add Logging to File
* Smaller Changes
* Add Semantic Versioning and refuses outdated Software from Startup (#1612)
* implements internal Semantic Version library
* adds version logging + reporting to process
* Advance SemVer struct for easier handling
* Add Accepted Version Store
* Fix Function
* Restructure
* Type Conversion
* Handle Version String properly
* Add Note about array index
* Set temporary Default Version
* Add Copyright
* Adding Version to Dashboard
* Adding Version Info Log
* Renaming and adding CheckerProcess
* Iteration Sync
* Iteration V2
* linting
* made LogAndReportVersion a go routine
* Refactor to Go Routine
* Add Context to Go Routine and allow Operation if Lookup to Control Server fails
* Handle Unmarshal properly
* Linting
* Relocate Version Checks
* Relocating Version Check and specified default Version for now
* Linting Error Prevention
* Refuse Startup on outdated Version
* Add Startup Check Function
* Straighten Logging
* Dont force Shutdown if --dev flag is set
* Create full Service/Peer Structure for ControlServer
* Linting
* Straighting Naming
* Finish VersionControl Service Layout
* Improve Error Handling
* Change Listening Address
* Move Checker Function
* Remove VersionControl Peer
* Linting
* Linting
* Create VersionClient Service
* Renaming
* Add Version Client to Peer Definitions
* Linting and Renaming
* Linting
* Remove Transport Checks for now
* Move to Client Side Flag
* Remove check
* Linting
* Transport Client Version Intro
* Adding Version Client to Transport Client
* Add missing parameter
* Adding Version Check, to set Allowed = true
* Set Default to true, testing
* Restructuring Code
* Uplink Changes
* Add more proper Defaults
* Renaming of Version struct
* Dont pass Service use Pointer
* Set Defaults for Versioning Checks
* Put HTTP Server in go routine
* Add Versioncontrol to Storj-Sim
* Testplanet Fixes
* Linting
* Add Error Handling and new Server Struct
* Move Lock slightly
* Reduce Race Potentials
* Remove unnecessary files
* Linting
* Add Proper Transport Handling
* small fixes
* add fence for allowed check
* Add Startup Version Check and Service Naming
* make errormessage private
* Add Comments about VersionedClient
* Linting
* Remove Checks that refuse outgoing connections
* Remove release cmd
* Add Release Script
* Linting
* Update to use correct Values
* Move vars private and set minimum default versions for testing builds
* Remove VersionedClient
* Better Error Handling and naked return removal
* Straighten the Regex and string conversion
* Change Check to allows testplanet and storj-sim to run without the
need to pass an LDFlag
* Cosmetic Change to Dashboard
* Cleanup Returns and remove commented code
* Remove Version Check if no build options are passed in
* Pass in Config Values instead of Pointers
* Handle missed Error
* Update Endpoint URL
* Change Type of Release Flag
* Add additional Logging
* Remove Versions Logging of other Services
* minor fixes
Change-Id: I5cc04a410ea6b2008d14dffd63eb5f36dd348a8b
* test-network-stalls tests... network stalls!
in particular, right now, it just tests whether an uplink correctly
times out after some amount of time when one of the nodes it's talking
to suddenly goes offline.
This tool is meant to be run under `storj-sim network test`.
Also included here:
* fix storj-sim-related test scripts on Mac
the default storj config dir on Mac has a space in it
('~/Library/Application Support/Storj'), which breaks everywhere it
shows up in an unquoted variable in a sh/bash script. easy enough to fix
as a one-off, but quoting bash vars avoids a dozen other potential
problems too.
change a few things using `head -c` to use `dd`. `head -c` works,
but is not as widely understood (as evidenced by each of these scripts
getting through code review, one at a time, with the comments not
matching the numbers actually used).
* storj-sim reports PIDs of worker processes to test
so that the tests can cause unfortunate "accidents" to befall the worker
processes in the course of the test, and find out whether everything
reacts correctly.
* define irreparable inspector protobuf
* add IrreparableDB method GetLimited
* fill out irreparable inspector API
* add IrreparableInspector server to satellite, fix small error
* refactor IrreparableDB to use pb.IrreparableSegment instead of irreparable.RemoteSegmentInfo
* Warn about permissions when creating identity
* Function to determine if directory is writeable
* Check if writable before authorizing
* Remove redeclatarion
* remove windows specific utils
* Nat nits
* Actually test if directory is writeable with file creation
* add private listener to grpc server
* add changes per init CR
* fix server.close
* add insecure grpc connection, update logs msg
* fix tests, move insecure client
* add private ports to storj-sim, add insecure client to other inspectors
* add ports to test so there arent conflicts
* fix lint err
* fix node started log msg, close public listener
* remove commented out line
* small identity refactor:
+ Optimize? iterative cert chain methods to use array instead of slice
+ Add `ToChain` helper for converting 1d to 2d cert chain
TODO: replace literal declarations with this
+ rename `ChainRaw/RestChainRaw` to `RawChain/RawRestChain`
(adjective noun, instead of nound adjective)
* add regression tests for V3-1320
* fix V3-1320
* separate `DialUnverifiedIDOption` from `DialOption`
* separate `PingNode` and `DialNode` from `PingAddress` and `DialAddress`
* update node ID while bootstrapping
* goimports & fix comment
* add test case
* Wiring up DumpNodes response for Inspector
* Finalize everything and test that it works
* Get Count and DumpNodes working for Overlay Cache
* WIP updating payment rollup to check statDB instead of overlay
* FIrst pass at updating statDB to take wallet and email
* Passing tests
* use pb.NodeOperator instead of Meta struct
* remove TODO
* revert go.mod
* Get SQL migration working correctly
* Changes Meta to Operator in NodeStats struct
* Adds update operator logic for statDB
* Fix db migrate tests - added v5 snapshot
* User friendly msg for missing snapshot version
* Passing tests
* Change node update to happen in discovery instead of in overlay
* Fix logic and update function calls
* Update comment on UpdateOperator interface method
* Update name of parameter
* Change type of argument to UpdateOperator
* Updates statDB tests
* Adding dockerfile for running the web UI for Satellite
* Updating to work with Makefile and from root directory of repo
* Updating satellite ui build process to run in a more production like mode by generating the assets the pulling those into the satellite container
* Updates to allow external traffic to UI, updates to storagenode for identity creation, and logging for bug tracking
* Adding auto cert generation for storagenode
* removing satellite-ui-image from main images flow in Makefile and adding latest tag to docker build for it
* Adding solid defaults, tuning dockerfiles, and moving to standard logging methods
* Updating logging to be more standard
* Updating to logger.Debug
* Removing unused library and unused identity creation code
Change-Id: I956453037e303693ea37f94318180af0ab7984d5
Adds a new `Info` method to the Kademlia endpoint that returns the following local node info:
* ID
* Type
* Metadata (email and wallet)
* Restrictions (free storage and bandwidth)
The new endpoint is exposed as `inspector kad node-info` command too.
this bandaid-fixes the identity tool issues (revocation
db defaults to /revocations.db due to the missing CONFDIR)
Change-Id: Ibdc8d1e9b64ec9a545bea592b0bd167ff5138117
* separate TLS options from server options (because we need them for dialing too)
* stop creating transports in multiple places
* ensure that we actually check revocation, whitelists, certificate signing, etc, for all connections.
this change removes the cryptopasta dependency.
a couple possible sources of problem with this change:
* the encoding used for ECDSA signatures on SignedMessage has changed.
the encoding employed by cryptopasta was workable, but not the same
as the encoding used for such signatures in the rest of the world
(most particularly, on ECDSA signatures in X.509 certificates). I
think we'll be best served by using one ECDSA signature encoding from
here on, but if we need to use the old encoding for backwards
compatibility with existing nodes, that can be arranged.
* since there's already a breaking change in SignedMessage, I changed
it to send and receive public keys in raw PKIX format, instead of
PEM. PEM just adds unhelpful overhead for this case.
* Divide uplink and gateway params set
* attempt to fix docker
* attempt to fix all in one
* test
* more reorganization
* fix compilation error
* fix imports order
* fix dependency
* rename structs
* keep minio params for now
* review comments
* remove manual flag check
* move payments command into satellite/main.go
* flag for db connection string in paymentsCmd
* refactor payments to satellite subcommand
* reports command, add payments arg descriptions
* report data prints to stdout unless --out is set
* fix small error in csv columns
* Consolidate identity management:
Move identity cretaion/signing out of storagenode setup command.
* fixes
* linters
* Consolidate identity management:
Move identity cretaion/signing out of storagenode setup command.
* fixes
* sava backups before saving signed certs
* add "-prebuilt-test-cmds" test flag
* linters
* prepare cli tests for travis
* linter fixes
* more fixes
* linter gods
* sp/sdk/sim
* remove ca.difficulty
* remove unused difficulty
* return setup to its rightful place
* wip travis
* Revert "wip travis"
This reverts commit 56834849dcf066d3cc0a4f139033fc3f6d7188ca.
* typo in travis.yaml
* remove tests
* remove more
* make it only create one identity at a time for consistency
* add config-dir for consitency
* add identity creation to storj-sim
* add flags
* simplify
* fix nolint and compile
* prevent overwrite and pass difficulty, concurrency, and parent creds
* goimports
* Add more info to SN logs
* remove config-dir from user config
* add output where config was stored
* add message for successful connection
* fix linter
* remove storage.path from user config
* resolve config path
* move success message to info
* log improvements
apparently, the presence of an "Identity" attribute in a config struct
does not imply that anything will fill it in or use it.
i tested all of these executables manually and individually this time.
This change removes automatic metrics reporting for everything going
through process.Exec(), and re-adds metrics reporting for those commands
which are expected to be long-lived. Other commands (which may have been
intermittently sending metrics before this, if they ran unusually long)
will no longer send any metrics.
For commands where it makes sense, a node ID is used as the metrics ID.
* Edit config on Setup
* Default to 1TiB storage space and 500GiB bandwidth
* Use human readable formats
* Use memory
* units of 1024 are measured with KiB/MiB etc
* pkg/cfgstruct: allow values to be configured with human readable sizes
Change-Id: Ic4e9ae461516d1d26fb81f6e44c5ac5cfccf777f
* Modify tests
* Removed comments
* More merge conflict stuff resolved
* Fix lint
* test fixin
Change-Id: I3a008206bf03a4446da19f642a2f9c1f9acaae36
* Remove commented code but secretly leave it in the histroy forever
* Move flag definition to struct
now kad inspector features exist on every server that has
kademlia running. likewise, overlay and statdb.
this means kad inspection features are now available on
storage nodes
Change-Id: I343c873552341de13302bfb7a5d79cccc84fc6b8
* Adding other top level vars to be parsed into config
* Adding additional vars for parsing
* Fixing shell script conditionals in remaining entrypoints
* Adding null default for remaining env variable if statements
* pkg/identity: use sha256 instead of sha3 for pow
Change-Id: I9b7a4f2c3e624a6e248a233e3653eaccaf23c6f3
* pkg/identity: restructure key generation a bit
Change-Id: I0061a5cc62f04b0c86ffbf046519d5c0a154e896
* cmd/identity: indefinite key generation command
you can start this command and leave it running and it will fill up your
hard drive with node certificate authority private keys ordered by
difficulty.
Change-Id: I61c7a3438b9ff6656e74b8d74fef61e557e4d95a
* pkg/storj: more node id difficulty testing
Change-Id: Ie56b1859aa14ec6ef5973caf42aacb4c494b87c7
* review comments
Change-Id: Iff019aa8121a7804f10c248bf2e578189e5b829d
* Add test for aio
* Don't trust the user to have images built for a version
* Make travis run the aio test
* Add missing values to docker-compose, sort some things, consider the gateway image
* today's changes
* config changed, again
* more fixes
* Expose satellite port on localhost:7778
* Add retries and a timeout around the big-testfile test in AIO
* Another config value changed
* Make this error message a little more useful
* Fix nil condition
* If the directory is somehow persistent, but the config file itself isn't created yet, create it
* Other improvements to thd storagenode Docker image
* Other improvements to thd satellite Docker image
* Other improvements to thd gateway Docker image
* Other improvements to thd uplink Docker image
* Add '--dir' param for all CLI parts (replace --base-path)
* FindDirParam method moved
* fix compilation error
* make param global
* remove unused fields
* rename param
* remove config flag
* goimports
* intial changes to migrate statdb to masterdb framework
* statdb refactor compiles
* added TestCreateDoesNotExist testcase
* Initial port of statdb to masterdb framework working
* refactored statdb proto def to pkg/statdb
* removed statdb/proto folder
* moved pb.Node to storj.NodeID
* CreateEntryIfNotExistsRequest moved pd.Node to storj.NodeID
* moved the fields from pb.Node to statdb.UpdateRequest
ported TestUpdateExists, TestUpdateUptimeExists, TestUpdateAuditSuccessExists TestUpdateBatchExists
* WIP possible discovery service impl
* Adds discovery service to CaptPlanet
* Updates the config and server for discovery service
* updates testplanet to use discovery package
* update satellite imports
* Removes unnecessary cache test
* linter fixes
* adds discovery startup to captplanet
* invoke refresh
* updates to discovery refresh cycle
* Make implementation more consistent with previous implementation
* add wait before trying to upload
* sleep a bit more
* remove kademlia bootstrap
* updates
* remove comments
* cmd/statreceiver: lua-scriptable stat receiver
Change-Id: I3ce0fe3f1ef4b1f4f27eed90bac0e91cfecf22d7
* some updates
Change-Id: I7c3485adcda1278fce01ae077b4761b3ddb9fb7a
* more comments
Change-Id: I0bb22993cd934c3d40fc1da80d07e49e686b80dd
* linter fixes
Change-Id: Ied014304ecb9aadcf00a6b66ad28f856a428d150
* catch errors
Change-Id: I6e1920f1fd941e66199b30bc427285c19769fc70
* review feedback
Change-Id: I9d4051851eab18970c5f5ddcf4ff265508e541d3
* errorgroup improvements
Change-Id: I4699dda3022f0485fbb50c9dafe692d3921734ff
* too tricky
the previous thing was better for memory with lots of errors at a time
but https://play.golang.org/p/RweTMRjoSCt is too much of a foot gun
Change-Id: I23f0b3d77dd4288fcc20b3756a7110359576bf44
* Merge bwagreement db into satellite master db
* adjust to recent tally changes
* linter problems
* linter problems
* returning db structs in more optimal way
* added pointer for assignment
* error message changed
* better param message
* adds channel for getting node out of lookup
* WIP adding the channels to lookups
* WIP adding channel to node lookups
* Wires up FindNodes method with channels
* WIP adds a test suite for lookup - tests are still failing
* WIP wires up use of testplanet for kademlia lookup tests
* WIP merging in node id changes
* Merges in pkg/storj node type changes
* Tests passing
* Lookup node working via Inspector now
* updates
* WIP working on getting tests passing
* WIP getting tests passing
* FindNode works
* Linter fix
* Adds copyrights to lookup_test
* removes a fmt.Printf I missed
* Removes commented out lines
* Pulls statdb stats into overlay cache whenever cache.Put() is called
* Updates overlay.FindStorageNodes()/overlayClient.Choose() to filter based on node stats
* Updates overlay.FindStorageNodes()/overlayClient.Choose() to exclude duplicate IP addresses
* preparing for use of `customtype` gogo extension with `NodeID` type
* review changes
* preparing for use of `customtype` gogo extension with `NodeID` type
* review changes
* wip
* tests passing
* wip fixing tests
* more wip test fixing
* remove NodeIDList from proto files
* linter fixes
* linter fixes
* linter/review fixes
* more freaking linter fixes
* omg just kill me - linterrrrrrrr
* travis linter, i will muder you and your family in your sleep
* goimports everything - burn in hell travis
* goimports update
* go mod tidy
* initial commit of inspector gadget wireup
* change name of comman dline tool, setup grpc server
* Get inspector cli working with grpc client
* Wired up CountNodes command
* WIP getting buckets response working
* Added GetBucket command
* WIP working on get buckets command
* WIP working on bucket list
* Still WIP
* WIP getting bucket counts to work
* Some clean up of unnecessary changes
* List Buckets and Get Bucket are working
* Removing logs, getting ready for review
* initial commit of inspector gadget wireup
* change name of comman dline tool, setup grpc server
* Get inspector cli working with grpc client
* Wired up CountNodes command
* WIP getting buckets response working
* Added GetBucket command
* WIP working on get buckets command
* WIP working on bucket list
* Still WIP
* WIP getting bucket counts to work
* Some clean up of unnecessary changes
* List Buckets and Get Bucket are working
* Removing logs, getting ready for review
* Fix error return
* Trying to get tests passing
* Adds method on dht mock for tests
* Add dbx files back
* Fix package import error in dbx file
* Adds copyrights to pass linter
* tidy go mod
* Updates from code review
* Updates inspector to take flag arguments for address
* Format list-buckets output more prettier
* Wiring up PING in kad inspector tools
* initial commit of inspector gadget wireup
* change name of comman dline tool, setup grpc server
* Get inspector cli working with grpc client
* Wired up CountNodes command
* WIP getting buckets response working
* Added GetBucket command
* WIP working on get buckets command
* WIP working on bucket list
* Still WIP
* WIP getting bucket counts to work
* Some clean up of unnecessary changes
* List Buckets and Get Bucket are working
* Removing logs, getting ready for review
* initial commit of inspector gadget wireup
* change name of comman dline tool, setup grpc server
* Get inspector cli working with grpc client
* Wired up CountNodes command
* WIP getting buckets response working
* Added GetBucket command
* WIP working on get buckets command
* WIP working on bucket list
* Still WIP
* WIP getting bucket counts to work
* Some clean up of unnecessary changes
* List Buckets and Get Bucket are working
* Removing logs, getting ready for review
* Fix error return
* Trying to get tests passing
* Adds method on dht mock for tests
* Add dbx files back
* Fix package import error in dbx file
* Adds copyrights to pass linter
* tidy go mod
* Updates from code review
* Updates inspector to take flag arguments for address
* Format list-buckets output more prettier
* Write access for uplink mount command
* fix linter problems
* Fix closing wrong variable and debug logs
* goimports
* fix problem with missing getattr for large files
* better map initialization
* fixes after comments
* add support for making directory
* add support for removing directories
* optimize OpenDir and Rmdir methods
* use storj.JoinPaths
* fix linter issues
* remove useless error check
* Signature verification
* Clean up agreement sender to have less errors
* overlay address in captnplanet
* Refactor bandwidth.proto to not use streams
* Make sure the send worked
* Handle connection to satellite
* Save renter public key inside of renter bandwidth allocations
* Default diag to sqlite. Make configurable
* Separate bw server and dbm; regenerate dbx files
* Make sure test uses protobufs
* Demonstrate creating bandwidth allocations
* WIP starting to wire up the kademlia CLI tool
* WIP wiring up kad cli tools
* WIP starting to wire up the kademlia CLI tool
* WIP wiring up kad cli tools
* Got everything wired up
* WIP starting to wire up the kademlia CLI tool
* WIP wiring up kad cli tools
* merge in upstream
* WIP wiring up kad cli tools
* Got everything wired up
* WIP trying to get CLI to connect
* Inspector connects to overlay now
* Some refactoring
* Linter fixes
* Linter fixes
* Switch to pkg/process instead of using rootCmd.Execute
* add storeConfig struct and getSegmentStore helper for creating a segment store
* implement segment store in repairer, remove unnecessary repairer Repair method
* change repair method parameter from int to int32 to match type being passed in
* implement repairer service in captplanet
* rework Config, set Config defaults in captplanet/setup
The old paths.Path type is now replaced with the new storj.Path.
storj.Path is simply an alias to the built-in string type. As such it can be used just as any string, which simplifies a lot working with paths. No more conversions paths.New and path.String().
As an alias storj.Path does not define any methods. However, any functions applying to strings (like those from the strings package) gracefully apply to storj.Path too. In addition we have a few more functions defined:
storj.SplitPath
storj.JoinPaths
encryption.EncryptPath
encryption.DecryptPath
encryption.DerivePathKey
encryption.DeriveContentKey
All code in master is migrated to the new storj.Path type.
The Path example is also updated and is good for reference: /pkg/encryption/examples_test.go
This PR also resolve a nonce misuse issue in path encryption: https://storjlabs.atlassian.net/browse/V3-545
* implements CombineErrors on runCfg error chan
* implement error channel timeout and CombineErrors
* implements CombineErrors with time.After timeout
* changes d to duration in args
* changes comment to better reflect what collectErrors does
* appeases the linter gods
* Gets rid of timeout bug in collectErrors
* Initial Layout
* Commit to test File Handling OS independed
* Hide struct properties to prevent manual interaction
* Fix Linting Errors
* 1st Working Windows Version
* Add missing Error Handling
* Fix Linting Errors
* Remove dependencies
* Further Improvements
* Remove commented code
* Improve comments and error messages
* No pointers to FPath
* Improve comment
* Do not filepath.ToSlash URL path
* Extract helper functions for parsing local path and Storj path
* Minor Improvements based on PR Comments
* Fix Linting Error and make Regex private
* Improve Layout
* Rework FPath and add tests
* Add more tests cases for windows
* Use for-loop instead of goto
* Use FPath in all uplink commands
* Add guard checks
* Add Test Cases and add comments
* Let's do it right this time
* Oh travis...
* Handle redis URL
* Travis... why u gotta be like this?
* Handle when address does not use redis scheme
* Start repairer
* Match provider.Responsibility interface
* Simplify if statement
* Config doesn't need to be a pointer
* Initialize doesn't need to be exported
* Don't run checker or repairer on startup
* Fix travis complaints
* Creates cron-job for checker, adds it to captplanet and satellite
* removes datarepair from satellite & captplanet run
* Delete config.go
* removes unused datarepair imports
* adds comments to fix linter
* Loads cache from context for PointerDB access
* WIP adds overlay lookups to pointerdb requests
* Pointer lookup code is added for Get
* adds feature flag for pointerdb return
* refactors pointerdb code
* removes some unnecessary debug logs
* Fixes indent in config
* adds early return for non-remote pointers
* formats code, removes some comments
* Fixes tests broken by pointer proto changes
* adds error check and merges variable declaration
* removes commented out proto import
* adds error check to pdbclient
* merged the lasted master changes
* debug working of handling ctrl+c
* Handling of clean up of partially uploaded segments and pieces
* code cleanup per code comment
* updates based on code review comments
* setup repairer loop
* added read from queue
* Refactor to make things easier to import
* add more control flow to repairer
* add comment
* basic interval structure for running check/repair
* change function name GetNext to Dequeue
* better increment/decrement syntax
* export Repairer struct
* delete 'unreachable code'
* add mon.Task() to Repairer.Repair
* remove 24 hour interval
* set maxRepair on Config as well as Repairer
* add comment for Repairer struct, check err
* comment out runCfg.Repair in cmd/satellite/main.go because it is NI yet
* begin adding encryption for remote pieces
* begin adding decryption
* add encryption key as arg to Put and Get
* move encryption/decryption to object store
* Add encryption key to object store constructor
* Add the erasure scheme to object store constructor
* Ensure decrypter is initialized with the stripe size used by encrypter
* Revert "Ensure decrypter is initialized with the stripe size used by encrypter"
This reverts commit 07272333f461606edfb43ad106cc152f37a3bd46.
* Revert "Add the erasure scheme to object store constructor"
This reverts commit ea5e793b536159d993b96e3db69a37c1656a193c.
* move encryption to stream store
* move decryption stuff to stream store
* revert changes in object store
* add encryptedBlockSize and close rangers on error during Get
* calculate padding sizes correctly
* encryptedBlockSize -> encryptionBlockSize
* pass encryption key and block size into stream store
* remove encryption key and block size from object store constructor
* move encrypter/decrypter initialization
* remove unnecessary cast
* Fix padding issue
* Fix linter
* add todos
* use random encryption key for data encryption. Store an encrypted copy of this key in segment metadata
* use different encryption key for each segment
* encrypt data in one step if it is small enough
* refactor and move encryption stuff
* fix errors related to nil slices passed to copy
* fix encrypter vs. decrypter bug
* put encryption stuff in eestream
* get captplanet test to pass
* fix linting errors
* add types for encryption keys/nonces and clean up
* fix tests
* more review changes
* add Cipher type for encryption stuff
* fix rs_test
* Simplify type casting of key and nonce
* Init starting nonce to the segment index
* don't copy derived key
* remove default encryption key; force user to explicitly set it
* move getSegmentPath to streams package
* dont require user to specify encryption key for captplanet
* rename GenericKey and GenericNonce to Key and Nonce
* review changes
* fix linting error
* Download uses the encryption type from metadata
* Store enc block size in metadata and use it for download
* add mb command
* forgot colon
* add command descriptions
* use utils.ParseURL in commands
* return error message instead of minio.BucketAlreadyExists in mb
* ls command with bucket store functionality
* rb command with bucket store functionality
* rm command with bucket store functionality
* newline
* use print rather than errs for messages, add no buckets messsage
* cp command with bucket store functionality
* remove deprecated getStorjObjects function
* defer utils.LogClose(f) on instead of defer f.Close()
* Check for no buckets after for loop
* add checks for unspecified bucket in bucket store methods
* fix incorrect return types
* add no path error messages in object store methods
* split copy into helpers
* srcObj scheme check in download
* print buckets instead of appending to slice
* check if destObj.Host != srcObj.Host
* better method of handling destination name if not specified
* uplink rename
* final cleanups
* trailing slash fixes
* linting
* more linting
* helpful error messages
* Adjust startAfter after merging #328
* Improve output messages
* Improved error check for empty bucket and path
* No page limit on client side. Rely on server side limit.
* Better time formatting
* Fix paths in recursive list results
* Normalize the dockerfiles and entrypoints
* fix formattting and docker-compose file
* add missing env var to satellite dockerfile
* Remove build args no longer in use
* More changes to make it all work
* Finally fix the binary builds for a couple os/arch combinations
* Make the file executable before adding it to the zip
* This cache hack wasn't suppose to make it into the PR
* Guard against calling the binary target by itself
* Order matters on OS X
* Vendored my image
* No 386 builds until storage is fixed.
* First pass at building binaries
* Finished building images
* Reworked some bits to save binaries in a better place.
* First pass at uploading binaries
* Builds for freebsd fail currently
* Add ignore file for docker builds to not invalidate the cache as often
* Docker image for 1.11-alpine exists now
* Name windows binaries correctly
* The makefile is used in tests.
* Take a swing at updating the tests for 1.11
* Switch to something with glibc so the race detector works.
* Remove unused .PHONY targets
* add CopyObject method
* use utils.LogClose
* extract common code from GetObject to getObject helper
* remove rr.Range from getObject helper, create helper putObject
* return rr, err in getObject helper
* extract code from PutObject into putObject helper
* remove commented out text
* remove other commented out code
* WIP trying to get storj cp command to work with copyObject
* fix typo in rb and now it works
* use rr.Size() instead of srcInfo.Size
* Revert "WIP trying to get storj cp command to work with copyObject"
This reverts commit e256b9f9a0fda728d41eb5b9d7a98b5446825842.
* add CopyObject test
* rebase and fix merge conflicts
* check error in gateway-storj test
* fix typo
* wip ca/ident cmds
* minor improvements and commenting
* combine id and ca commands and add $CONFDIR
* add `NewIdenity` test
* refactor `NewCA` benchmarks
* linter fixes
* First pass at an all-in-one compose project
* Sort out dependencies so uplink can build in docker
* Added the final bits to make this work
* Add readme for all-in-one
* Fix sed to work on OS X and Linux
* Make the readme for all-in-one better
* Only bring up the satellite and uplink after fixing the mock overlay
* Use a dummy value for mock overlay for now
* Finishing touches
* Fix url form for aws cli tool
* Move files out of all-in-one directory to help with directory confusion.
* Added a make target to make all-in-one even better
* move mock overlay from client to server
this doesn't really change much, but it does allow you to
run a standalone gateway against captain planet. it still does
not allow you to run a standalone gateway against a standalone
heavy client
* pointerdb: small error fixes
* some cleanups
* fix tests
* captplanet standalone farmer setup
* Bandwidth Allocation
* utils.Close method changed to utils.LogClose
* Get build temporarily working
* Get/Put for PSClient should take payer bandwidth allocations rather than the NewPSClient function
* Update example client to reflect changes in client API
* Update ecclient to use latest PSClient, Make NewPSClient return error also
* Updated pieceranger tests to check for errors; sign method should take byte array
* Handle defers in store.go better
* Fix defer functions in psdb.go
* fun times
* Protobuf bandwidthallocation data is now a byte array
* Remove psservice package and merge it into pstore server
* Write wrapper for database calls
* Change all expiration names in protobuf to be more informative; add defer in retrieve; remove old comment
* Make PSDB tests implementation independent rather than method independent
* get rid of payer, renter in ecclient
* add context monitoring in store and retrieve
* WIP first commit
* change args check
* rename to cli, rename folder to storj, const defaultConfDir, use process.Exec()
* typos
* WIP create helper for getting minio objectlayer, changed setup command to try to match changes in setting up identity
* add rb command
* changes for setting up identity
* remove concurrency field from setupCfg
* rename variable returned by url.Parse to u across all commands for consistency
* add marker functionality to ls command
* add download functionality to cp command
* fix typo in rb init, use short variable names
* add statdb proto and example client
* server logic
* update readme
* remove boltdb from service.go
* sqlite3
* add statdb server executable file
* create statdb node table if it does not exist already
* get UpdateBatch working
* update based on jt review
* remove some commented lines
* fix linting issues
* reformat
* apiKey -> APIKey
* update statdb client apiKey->APIKey
* pkg/provider: with pkg/provider merged, make a single heavy client binary and deprecate old services
* add setup to gw binary too
* captplanet: output what addresses everything is listening on
* revert peertls/io_util changes
* define config flag across all commands
* use trimsuffix
* captplanet
I kind of went overboard this weekend.
The major goal of this changeset is to provide an environment
for local development where all of the various services can
be easily run together. Developing on Storj v3 should be as
easy as running a setup command and a run command!
To do this, this changeset introduces a new tool called
captplanet, which combines the powers of the Overlay Cache,
the PointerDB, the PieceStore, Kademlia, the Minio Gateway,
etc.
Running 40 farmers and a heavy client inside the same process
forced a rethinking of the "services" that we had. To
avoid confusion by reusing prior terms, this changeset
introduces two new types: Providers and Responsibilities.
I wanted to avoid as many merge conflicts as possible, so
I left the existing Services and code for now, but if people
like this route we can clean up the duplication.
A Responsibility is a collection of gRPC methods and
corresponding state. The following systems are examples of
Responsibilities:
* Kademlia
* OverlayCache
* PointerDB
* StatDB
* PieceStore
* etc.
A Provider is a collection of Responsibilities that
share an Identity, such as:
* The heavy client
* The farmer
* The gateway
An Identity is a public/private key pair, a node id, etc.
Farmers all need different Identities, so captplanet
needs to support running multiple concurrent Providers
with different Identities.
Each Responsibility and Provider should allow for configuration
of multiple copies on its own so creating Responsibilities and
Providers use a new workflow.
To make a Responsibility, one should create a "config"
struct, such as:
```
type Config struct {
RepairThreshold int `help:"If redundancy falls below this number of
pieces, repair is triggered" default:"30"`
SuccessThreshold int `help:"If redundancy is above this number then
no additional uploads are needed" default:"40"`
}
```
To use "config" structs, this changeset introduces another
new library called 'cfgstruct', which allows for the configuration
of arbitrary structs through flagsets, and thus through cobra and
viper.
cfgstruct relies on Go's "struct tags" feature to document
help information and default values. Config structs can be
configured via cfgstruct.Bind for binding the struct to a flagset.
Because this configuration system makes setup and configuration
easier *in general*, additional commands are provided that allow
for easy standup of separate Providers. Please make sure to
check out:
* cmd/captplanet/farmer/main.go (a new farmer binary)
* cmd/captplanet/hc/main.go (a new heavy client binary)
* cmd/captplanet/gw/main.go (a new minio gateway binary)
Usage:
```
$ go install -v storj.io/storj/cmd/captplanet
$ captplanet setup
$ captplanet run
```
Configuration is placed by default in `~/.storj/capt/`
Other changes:
* introduces new config structs for currently existing
Responsibilities that conform to the new Responsibility
interface. Please see the `pkg/*/config.go` files for
examples.
* integrates the PointerDB API key with other global
configuration via flags, instead of through environment
variables through viper like it's been doing. (ultimately
this should also change to use the PointerDB config
struct but this is an okay shortterm solution).
* changes the Overlay cache to use a URL for database
configuration instead of separate redis and bolt config
settings.
* stubs out some peer identity skeleton code (but not the
meat).
* Fixes the SegmentStore to use the overlay client and
pointerdb clients instead of gRPC client code directly
* Leaves a very clear spot where we need to tie the object to
stream to segment store together. There's sort of a "golden
spike" opportunity to connect all the train tracks together
at the bottom of pkg/miniogw/config.go, labeled with a
bunch of TODOs.
Future stuff:
* I now prefer this design over the original
pkg/process.Service thing I had been pushing before (sorry!)
* The experience of trying to have multiple farmers
configurable concurrently led me to prefer config structs
over global flags (I finally came around) or using viper
directly. I think global flags are okay sometimes but in
general going forward we should try and get all relevant
config into config structs.
* If you all like this direction, I think we can go delete my
old Service interfaces and a bunch of flags and clean up a
bunch of stuff.
* If you don't like this direction, it's no sweat at all, and
despite how much code there is here I'm not very tied to any
of this! Considering a lot of this was written between midnight
and 6 am, it might not be any good!
* bind tests
* Add dockerfile and yaml for setting up piecestore servers
* Fix dockerfile for @aleitner (#115)
* Fix dockerfile for @aleitner
* Move files for @coyle
* Update yaml
* My linter had some errors so I resolved them
* Make jenkins do the needful
* Make piecestore-farmer look like overlay's build process
* Fix service spec to work in staging
* Make Jenkins push images, but not deploy them, yet.
* Modify entrypoint to fit new verbs
* Update piecestore-farmer entrypoint script to handle new app output
* WIP creating admin node service
- WIP changing the process pkg to accept multiple services
- WIP looping over services passed to process
- add netstate/service.go file and abstract it for service processing
* implement goroutine to launch each process
* goroutines working with multiple services
* code review fixes
* more code updates for review
* Add pkg lock and mod files back in
* code review updates
* update process.Main with better concurrent error handling
* Update error handling and pass ctx to StartService
* Update error handling with channel implementation
* Merge in upstream changes
- Simplify error handling channels
* updates
* Updates per reviewable
* fix test
* Setup test exec
* Scaffold test setup
* process main test working
* update admin process test
* Test multiple processes done
* Add error classes for testing, test main logger error
* Updates to tests
* Update how process.Main() handles configs
* Complete merge
* Update Gopkg and add Copyright
* Fix cyclical import issue
- Added .coverprofile to gitignore
- Update admin main.go function call
* remove unnecessary line
* Updates
* DRY up cmd/netstate package
* update service function calls
* updates
* Trying no-ops in examples
* rename netstate to pointerdb
* trying to fix merge
* dep ensure and run tests
* remove flag.Parse
* Update deps
* Skip offending test in pkg/process, to be fixed later
* separated commands and actions from main.go, created delete command
* refactored piecestore-farmer to use cobra CLI
* added piecestore-farmer main.go and long command descriptions
* pkg/process: start replacing pkg/process with cobra helpers
* address review comments
* addressed github comments, rename pstore.DetermineID to GenerateID, remove utils.NewID and use pstore.GenerateID instead
* addressed comments
* pulled proc and got CLI working with process package
* goimports
* stdout formatting
* WIP adding tests for pstoreFarmer CLI, fixed bug in check for preexisting config
* copyright header, change exported variable
* changed error formatting to be consistent
* more tests
* stdout, add (\n)s in zap logs, set home inside SetConfigPath() instead of passing in
* resolved merge conflicts
* goimports and fixed merge error
* removed generateID func to use kademlia.NewID instead, refactored to match kademlia.NewKademlia()
* Implement psclient interface
* Add string method to pieceID type
* try to fix linter errors
* Whoops missed an error
* More linter errors
* Typo
* Lol double typo
* Get everything working, begin adding tests for psclient rpc
* goimports
* Forgot to change the piecestore cli when changed the piecestore code
* Fix CLI
* remove ID length, added validator to pieceID
* Move grpc ranger to client
Change client PUT api to take a reader rather than return a writer
* GRPCRanger -> PieceRanger; Make PieceRanger a RangeCloser
* Forgot to remove offset
* Added message upon successful store
* Do that thing dennis and kaloyan wanted
* goimports
* Make closeConn a part of the interface for psclient
* Use interface
* Removed uneccessary new lines
* goimport
* Whoops
* Actually we don't want to use the interface in Piece Ranger
* Renamed piecestore in examples to piecestore-client; moved piecestore-cli to examples
* Make comments look nicer
* piecestore: connect to kad
* piecestore: Linter errors
* piecestore: added pstore config command line utility
* piecestore: removed main.go, implement methods and structs
* piecestore: Import Cam's config code into piecestore-farmer
* piecestore: moving farmer to urfavecli
* piecestore: added create command
* piecestore: Removed old config, added server start code to cli
* piecestore: Get server code working
* piecestore: Changed default dir for storing piece store data; added ttl to config
* piecestore: Generate id; add bootstrap ip for kad
* piecestore: Separate kad port and server port
* piecestore: goimports
* piecestore: Removed print
* piecestore: use pkg/process
* piecestore: Better config file
* piecestore: base58 encode for id
* piecestore: base58 encode and clean up cli
* piecestore: Typo
* piecestore: removed unnecessary variable
* piecestore: Fixed more typos
* piecestore: Place data in a directory based on nodeid
* piecestore: base58 encode instead
* piecestore: Add dependency to go.mod
* piecestore: Fix typo in rpc server start; clear data on failed piece upload
* add reference to dht to overlay client struct
* wip
* wip
* Implement FindNode
* get nodes
* WIP
* Merge in Dennis kademlia code, get it working with our code
* ping and moar
* WIP trying to get cache working with kademlia
* WIP more wiring up
* WIP
* Update service cli commands
* WIP
* added GetNodes
* added nodes to Kbucket
* default transport changed to TCP
* GetBuckets interface changed
* filling in more routing
* timestamp methods
* removed store
* Added initial network overlay explorer page
* Updating and building with dockerfile
* Working on adding bootstrap node code
* WIP merging in dennis' code
* WIP
* connects cache to pkg/kademlia implementation
* WIP redis cache
* testing
* Add bootstrap network function for CLI usage
* cleanup
* call bootstrap on init network
* Add BootstrapNetwork function to interface
* Merge in dennis kad code
* WIP updates to redis/overlay client interface
* WIP trying to get the DHT connected to the cache
* go mod & test
* deps
* Bootstrap node now setting up correctly
- Need to pass it through CLI commands better
* WIP adding refresh and walk functions, added cli flags
- added cli flags for custom bootstrap port and ip
* PR comments addressed
* adding FindStorageNodes to overlay cache
* fix GetBucket
* using SplitHostPort
* Use JoinHostPort
* updates to findstoragenodes response and request
* WIP merge in progress, having issues with a panic
* wip
* adjustments
* update port for dht bootstrap test
* Docker
* wip
* dockerfile
* fixes
* makefile changes
* Update port in NewKademlia call
* Update local kademlia DHT config
* kubernetes yaml
* cleanup
* making tests pass
* k8s yaml
* lint issues
* Edit cli flags to allow for configurable bootstrap IP and Port args
* cleanup
* cache walking the network now
* Rough prototype of Walk function laid out
* Move walk function into bootstrap function
* Update dht.go
* changes to yaml
* goimports
* added spawn scripts
* wip
* Make server not require length
* Added test for 0 length
* Added test for accepting length of 0
* linter errors
* Make store not take anything more than an id and maybe a ttl if you want
* initial commit for PUT request authorization
* inital auth for put request
* auth. request working for all req
* deleted library
* removed .db files
* work in progress for modifying test suite to accomodate credentials
* modified tests
* gofmt, fixed code based on suggestions; test passed
* gofmt again
* merged nat's update on pointers, passed tests, cleanup from git rebase
* fixed fmt
* fixed fmt on tests
* work in progress
* reduced code
* fixed naming conventions
* added line in code
* fixed server bug, merged new code to server, added env
* fixed linter; getting cright issues on piecestore
* added comments for what passes on the creds
* added spawn scripts
* Determine random id for storing
* Moved determine id to rpc example
* Added tests
* Better test
* goimports
* Updated tests
* Fix typos
* Added piecestore
* gofmt
* Added requested changes
* Added cli
* Removed ranger because I wanted something that can stand alone
* Add example of http server using piece store
* Changed piecestore code to make it more optial for error handelling
* Merged with piecestore
* Added missing package
* Forgot io import
* gofmt
* gofmt
* Forgot io
* Make path by hash exported
* updated to simplify again whoops
* Updated server to work real good
* Forgot ampersand
* Updated to match FilePiece
* Merged in cam's delete code
* Remove unused io
* Added RPC code
* Give the download request a reader
* Removed http server stuff; changed receive stream to say io.reader
* Added expiration date to shardInfo
* Change all instances of Shard to Piece; change protobuf name; moved client insance to outside functions
* added ttl info request
* Move scripts to http server pr; added close method for Retrieve api
* added rpc server tests for getting piece meta data and retrieval routes
* Resolved linter errors, moved to prc server to pkg, updated go.mod to use latest protobuf
* Imported cams test
* Bump gometalinter deadline
* WIP adding tests
* added tests for store and delete routes
* Add changes as requested by Kaloyan, also cleaned up some code
* Get the code actually working whoops
* More cleanup
* Separating database calls from api.go
* need to rename expiration
* Added some changes requested by JT
* Fix read size
* Fixed total amount to read
* added tests
* Simplify protobuf, add store tests, edited api to handle invalid stores properly, return errors instead of messages
* Moved rpc client and server to piece store
* Moved piecestore protobuf to the /protos folder
* Cleaned up messages
* Clean up linter errors
* Added missing sqlite import
* Add ability to do iterative reads and writes to pstore
* Incrementally read data
* Fix linter and import errors
* Solve linter Error
* Change return types
* begin test refactor
* refactored to implement only 1 db connection, moved SQLite row checking into separate function and removed defer on rows.Close(), fixed os.tempDir in rpc_test.go
* Cleaning up tests
* Added retrieve tests
* refactored delete tests
* Deleted old tests
* Updated cmd/piecestore to reflect changes to piecestore
* Refactored server tests and server/client store code
* gofmt
* WIP implementing TTL struct
* Read 4k at a time when Retrieving
* implemented ttl struct
* Accidentally removed fpiece dependency?
* Double resolve merge conflict
* Moved client to the examples since it is an example
* Change hash to id in protobuf. TODO: Change client and server to reflect these changes
* Update client and protobuf
* changed hash to id
* Handle eof properly in retrieve
* Id -> ID
* forgot to change import for client after moving
* Moved client and server main to examples
* Made changes requested by JT
* checkEntries is now private, created currentTime variable for checkEntries, added defer rows.Close()
* Print not fatal
* Handle overflow when reading from server
* added const IDLength
* removed types from comments
* Add reader/writer for download data from and uploading data to server
* goimports and comments
* fixed nits, casts, added OK const, DBCleanup now exits program on error
* Add stream reader and writer for server
* Fix errors
* i beforee except after c lol
* customizable data dir
* Forgot to rename variable
* customizable data dir
* Handle closing of server stream properly
* linter
* pass on inserting the same data twice
* linter
* linter
* Do the easy things JT asked for
* Handle overflow from reads properly; handle custom db path
* Handle overflow for server stream read; TODO Combine server and client stream reads
* Allow for TTL of 0 to stay forever
* Make Client cleaner for user
* adds pointer to netstate proto file
* generated updated netstate proto
* changes boltdb netstate to save pointers as values
* updates netstate Put to save Pointers, updates client example to put a pointer, adds grpc status errors, updates tests, changes boltdb 'File' struct to 'PointerEntry'
* updates netstate client example and client test to save pointers, updates netstate List and Delete
* begins adding netstate-http tests
* removes netstate http service
* re-adds netstate auth
* updates boltdb netstate test
* changes encrypted_unencrypted_size from int64 to bytes in netstate proto
* updates READMEs
* Added piecestore
* gofmt
* Added requested changes
* Added cli
* Removed ranger because I wanted something that can stand alone
* Changed piecestore code to make it more optial for error handelling
* Added missing package
* Forgot io import
* gofmt
* Make path by hash exported
* updated to simplify again whoops
* Forgot ampersand
* Updated to match FilePiece
* Change store to use io.CopyN
* Clear golinter errors
* Updated go.mod
* Updated go.mod
* adds proto files for netstate crud
* moves netstate grpc client lib into pkg/netstate where grpc netstate service is defined
* starts adding grpc client and server tests
* moves creation of grpc server into cmd/netstate/main.go, removes pkg/netstate/service.go, adds more client testing
* changed all 'Path' and 'Value' fields from strings to bytes, updated tests
* changes Get and Delete in proto file to receive 'requests' instead of 'file paths', adds tests for Get, List, and Delete
* changes netstate-routes to get 'fileValue' bytes not 'fileInfo'
* adds example rpc client in 'examples' and adds more specific debug logs
* adds readmes for netstate rpc services and updates netstate-routes
* Light client implementation with get-info and list-buckets commands
* Fix client package name
* Fix go.mod to work with vgo
* Use single `fmt.Printf` for `get-info` output
* Use unnamed import to client package
* Simplify usage of sha256 and sha512 sums
* Remove obsolete test code
* Use helper structs for unmarshalling bridge info
* Remove LGPL license files and adjust copyright headers
* Use github.com/zeebo/errs
* Use httptest for test http server
* Use viper for env var management
* Nested struct for swagger
* Add github.com/zeebo/errs to go.mod
* More bucket tests
* word wrap long line
* Use zeebo/errs for crypto errors
